u-boot/board/ti/omap5_uevm/evm.c

222 lines
4.7 KiB
C
Raw Normal View History

/*
* (C) Copyright 2010
* Texas Instruments Incorporated, <www.ti.com>
* Aneesh V <aneesh@ti.com>
* Steve Sakoman <steve@sakoman.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <tca642x.h>
#include "mux_data.h"
#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
#include <sata.h>
#include <usb.h>
#include <asm/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
#include <asm/arch/sata.h>
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
#endif
DECLARE_GLOBAL_DATA_PTR;
const struct omap_sysinfo sysinfo = {
"Board: OMAP5432 uEVM\n"
};
/**
* @brief tca642x_init - uEVM default values for the GPIO expander
* input reg, output reg, polarity reg, configuration reg
*/
struct tca642x_bank_info tca642x_init[] = {
{ .input_reg = 0x00,
.output_reg = 0x04,
.polarity_reg = 0x00,
.configuration_reg = 0x80 },
{ .input_reg = 0x00,
.output_reg = 0x00,
.polarity_reg = 0x00,
.configuration_reg = 0xff },
{ .input_reg = 0x00,
.output_reg = 0x00,
.polarity_reg = 0x00,
.configuration_reg = 0x40 },
};
/**
* @brief board_init
*
* @return 0
*/
int board_init(void)
{
gpmc_init();
gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);
return 0;
}
int board_late_init(void)
{
init_sata(0);
return 0;
}
int board_eth_init(bd_t *bis)
{
return 0;
}
#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
static void enable_host_clocks(void)
{
int auxclk;
int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
OPTFCLKEN_HSIC480M_P3_CLK |
OPTFCLKEN_HSIC60M_P2_CLK |
OPTFCLKEN_HSIC480M_P2_CLK |
OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
/* Enable port 2 and 3 clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
/* Enable port 2 and 3 usb host ports tll clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
#ifdef CONFIG_USB_XHCI_OMAP
/* Enable the USB OTG Super speed clocks */
setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
#endif
auxclk = readl((*prcm)->scrm_auxclk1);
/* Request auxilary clock */
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, (*prcm)->scrm_auxclk1);
}
#endif
/**
* @brief misc_init_r - Configure EVM board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
*
* @return 0
*/
int misc_init_r(void)
{
int reg;
u32 id[4];
#ifdef CONFIG_PALMAS_POWER
palmas_init_settings();
#endif
reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
id[0] = readl(reg);
id[1] = readl(reg + 0x8);
id[2] = readl(reg + 0xC);
id[3] = readl(reg + 0x10);
usb_fake_mac_from_die_id(id);
return 0;
}
void set_muxconf_regs_essential(void)
{
do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
}
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0, 0, 0, -1, -1);
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
#ifdef CONFIG_USB_EHCI
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
};
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
int ret;
enable_host_clocks();
ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
if (ret < 0) {
puts("Failed to initialize ehci\n");
return ret;
}
return 0;
}
int ehci_hcd_stop(void)
{
int ret;
ret = omap_ehci_hcd_stop();
return ret;
}
void usb_hub_reset_devices(int port)
{
/* The LAN9730 needs to be reset after the port power has been set. */
if (port == 3) {
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
udelay(10);
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
}
}
#endif
#ifdef CONFIG_USB_XHCI_OMAP
/**
* @brief board_usb_init - Configure EVM board specific configurations
* for the LDO's and clocks for the USB blocks.
*
* @return 0
*/
int board_usb_init(int index, enum usb_init_type init)
{
int ret;
#ifdef CONFIG_PALMAS_USB_SS_PWR
ret = palmas_enable_ss_ldo();
#endif
enable_host_clocks();
return 0;
}
#endif