Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2025-02-28 05:17:20 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/host/Makefile

61 lines
2.1 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 17:58:06 -04:00
# SPDX-License-Identifier: GPL-2.0+
drivers/usb : move usb drivers to drivers/usb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24 19:40:11 +01:00
#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
usb: Introduce CONFIG_SPL_DM_USB This allows building the SPL without driver model for USB. Since CONFIG_SPL_DM_USB is enabled if and only if CONFIG_DM_USB was enabled before, this patch does not change the build behaviour. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-21 08:43:53 +01:00
ifdef CONFIG_$(SPL_)DM_USB
usb: Remove CMD_USB dependency for common code Common USB code is built whenever USB is enabled (in non-SPL builds). The USB uclass is built whenever (SPL_)DM_USB is enabled. Both need to be independent from CMD_USB. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-21 08:43:55 +01:00
obj-y += usb-uclass.o
dm: usb: sandbox: Add a driver for sandbox This driver supports using emulation devices to provide a USB bus within sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2015-03-25 12:22:41 -06:00
obj-$(CONFIG_SANDBOX) += usb-sandbox.o
dm: usb: Add a uclass for USB controllers Add a uclass that can represent a USB controller. For now we do not create devices for things attached to the controller. This will be added later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2015-03-25 12:21:59 -06:00
endif
drivers/usb: regorganisation move to linux usb driver organisation as following drivers/usb/gadget drivers/usb/host drivers/usb/musb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-04-03 12:46:58 +02:00
# ohci
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o
obj-$(CONFIG_USB_ATMEL) += ohci-at91.o
obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o
arm: ep9315: Return back Cirrus Logic EDB9315A board support This patch returns back support for old ep93xx processors family Signed-off-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Cc: albert.u.boot@aribaud.net
2014-06-25 23:44:29 +04:00
obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o
usb: lpc32xx: add host USB driver Incorporate USB driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx USB driver - lpc3250 header file USB registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
2015-08-13 15:40:22 -04:00
obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
usb: add support of generic OHCI devices This driver is meant to be used with any OHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
2015-12-14 17:18:50 +03:00
obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
drivers/usb: regorganisation move to linux usb driver organisation as following drivers/usb/gadget drivers/usb/host drivers/usb/musb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-04-03 12:46:58 +02:00
# echi
Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-12 22:33:27 -04:00
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o
obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
usb: add support for generic EHCI devices This driver is meant to be used with any EHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
2015-12-02 12:32:02 +03:00
obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
obj-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
imx: usb: ehci-mx6: add usb support for imx7d soc Extend ehci-mx6 usb driver to support imx7d usb Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-08-06 15:43:17 -05:00
obj-$(CONFIG_USB_EHCI_MX7) += ehci-mx6.o
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
ehci: Add support for Qualcomm EHCI This driver is able to reconfigure OTG controller into HOST mode. Board can add board-specific initialization as board_prepare_usb(). It requires USB_ULPI_VIEWPORT enabled in board configuration. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 23:12:26 +02:00
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's This driver adds support for the USB peripheral on Freescale Vybrid SoC's. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-04-15 16:24:27 +05:30
obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs The rmobile SoC has usb host controller. This supports USB controllers listed in the R8A7790, R8A7791 and R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-03 13:55:54 +09:00
obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
ARM: zynq: ehci: Added USB host driver support Added USB host driver for zynq. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-25 12:21:04 +02:00
obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
drivers/usb : move usb drivers to drivers/usb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24 19:40:11 +01:00
USB: xHCI: Add stack support for xHCI This adds stack layer for eXtensible Host Controller Interface which facilitates use of USB 3.0 in host mode. Adapting xHCI host controller driver in linux-kernel by Sarah Sharp to needs in u-boot. Initial porting from Linux kernel version 3.4, with following top commit history of drivers/usb/host/xhci* : cf84055 xHCI: Cleanup isoc transfer ring when TD length mismatch found This adds the basic xHCI host controller driver with bare minimum features: - Control/Bulk transfer support has been added with required infrastructure for necessary xHC data structures. - Stream protocol hasn't been supported yet. - No support for quirky devices has been added. Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com> Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Dan Murphy <dmurphy@ti.com> Cc: Marek Vasut <marex@denx.de>
2013-09-14 14:02:45 +05:30
# xhci
usb: move CONFIG_USB_XHCI to Kconfig with renaming Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04 07:35:03 +09:00
obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
usb: dwc3: Add DWC3 controller driver support Add support for DWC3 XHCI controller driver Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
2015-05-29 14:47:15 +05:30
obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
usb: host: Add simple of glue driver for DWC3 USB Controllers integration This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 17:08:00 +02:00
obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
usb: xhci-rockchip: add rockchip dwc3 controller driver This patch add support for rockchip dwc3 controller, which corresponding to the two type-C port on rk3399 evb. Only support usb2.0 currently for we have not enable the usb3.0 phy driver and PD(fusb302) driver. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-24 12:02:17 +08:00
obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
usb: zynqmp: Add XHCI driver support Added USB XHCI driver support for zynqmp. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-11-16 16:49:23 +05:30
obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
usb: fsl: Add XHCI driver support Add xhci driver support for all FSL socs Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
2015-05-29 14:47:19 +05:30
obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
usb: xhci: Add Marvell MVEBU xHCI support This patch adds DM based support for the xHCI USB 3.0 controller integrated in the Armada 3700 SoC. It may be extended to be used by other MVEBU SoCs as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
2016-07-14 11:39:20 +02:00
obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
drivers: usb: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-17 17:34:56 +09:00
obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
usb: pci: Add XHCI driver for PCI Add a driver which locates the available XHCI controllers on the PCI bus and makes them available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-27 22:13:31 -07:00
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
usb: xhci: Add Renesas R-Car xHCI driver Add firmware V3, firmware loader and XHCI glue for the Renesas R-Car Gen3 SoCs XHCI controller. Thus far only the R-Car Gen3 R8A7795 ES2.0+ and R8A7796 are supported. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2017-10-15 15:01:29 +02:00
obj-$(CONFIG_USB_XHCI_RCAR) += xhci-rcar.o
usb: dwc3: Add dwc3 glue driver support for STi This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It configures the internal glue logic and syscfg registers. Part of this code been extracted from kernel.org driver (drivers/usb/dwc3/dwc3-st.c) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-05 11:04:24 +02:00
obj-$(CONFIG_USB_XHCI_STI) += dwc3-sti-glue.o
usb: dwc2: Add driver for Synopsis DWC2 USB IP block This is the USB host controller used on the Altera SoCFPGA and Raspbery Pi. This code has three checkpatch warnings, but to make sure it stays at least readable and clear, these are not fixed. These bugs are in the USB request handling combinatorial logic, so any abstracting of those is out of question. Tested on DENX MCV (Altera SoCFPGA 5CSFXC6C6U23C8N) and RPi B+ (BCM2835). Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Vince Bridgers <vbridger@altera.com> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-02-01 21:51:25 -07:00
# designware
obj-$(CONFIG_USB_DWC2) += dwc2.o
Reference in a new issue Copy permalink