Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-12 16:07:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/include/asm/arch-am33xx/spl.h

42 lines
1.1 KiB
C
Raw Normal View History

ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
/*
* (C) Copyright 2012
* Texas Instruments, <www.ti.com>
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-08 07:37:19 +00:00
* SPDX-License-Identifier: GPL-2.0+
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
*/
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_SPL_H_
Add TI816X support Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Fix warnings about vtp things in emif4.c, adapt AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-02 10:05:59 +00:00
#if defined(CONFIG_TI816X)
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 3
#define BOOT_DEVICE_MMC1 6
#define BOOT_DEVICE_MMC2 5
#define BOOT_DEVICE_UART 0x43
#define BOOT_DEVICE_MMC2_2 0xFF
#else
am33xx: Fix fetching of mmc1 bootmode from bootrom for AM33XX U-boot should not ignore getting the bootmode passed on from the bootrom. With this, U-boot SPL knows it was loaded from MMC1 and use this info to read full U-boot from MMC1 as well. Cc: pprakash@ti.com Cc: trini@ti.com Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-09-18 04:30:51 +00:00
#define BOOT_DEVICE_XIP 2
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
#define BOOT_DEVICE_NAND 5
ARM: AM43xx: Add header files Adding the following data: -> Prcm structure -> Base addresses -> Pin mux structure. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-07-30 06:06:28 +00:00
#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
#define BOOT_DEVICE_MMC1 8
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
am33xx: add ti814x specific register definitions Support the ti814x specific register definitions within arch-am33xx. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-03-15 10:07:06 +00:00
#elif defined(CONFIG_TI814X)
#define BOOT_DEVICE_MMC1 9
#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */
#endif
am33xx: Add SPI SPL as an option Add the required config.mk logic for this SoC as well as the BOOT_DEVICE define. Finally, enable the options on the am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
2012-10-16 13:06:07 +00:00
#define BOOT_DEVICE_SPI 11
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
#define BOOT_DEVICE_UART 65
am33xx: support for booting via usbeth This patch adds BOOT_DEVICE define for USB booting and fixes spl_board_init function to call arch_misc_init (this is the place there musb is initialized). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2013-02-05 11:36:25 +00:00
#define BOOT_DEVICE_USBETH 68
OMAP: networking support for SPL This patch adds support for networking in SPL. Some devices are capable of loading SPL via network so it makes sense to load the main U-Boot binary via network too. This patch tries to use existing network code as much as possible. Unfortunately, it depends on environment which in turn depends on other code so SPL size is increased significantly. No effort was done to decouple network code and environment so far. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-09-18 00:22:50 +00:00
#define BOOT_DEVICE_CPGMAC 70
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
#define BOOT_DEVICE_MMC2_2 0xFF
Add TI816X support Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Fix warnings about vtp things in emif4.c, adapt AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-02 10:05:59 +00:00
#endif
OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini <trini@ti.com>
2013-04-05 06:21:44 +00:00
ARM: AM43xx: Add header files Adding the following data: -> Prcm structure -> Base addresses -> Pin mux structure. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-07-30 06:06:28 +00:00
#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini <trini@ti.com>
2013-04-05 06:21:44 +00:00
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
Add TI816X support Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Fix warnings about vtp things in emif4.c, adapt AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-02 10:05:59 +00:00
#elif defined(CONFIG_TI81XX)
am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END Given that on TI814x we have MMC1/2 swapped, we also need to swap them in MMC_BOOT_DEVICES_START/END Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Tom Rini <trini@ti.com>
2013-04-09 15:40:40 +00:00
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1
#endif
ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK. Signed-off-by: Tom Rini <trini@ti.com>
2012-08-14 15:50:58 +00:00
#endif
Reference in a new issue Copy permalink