2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-23 19:43:33 +00:00
u-boot/arch/arm/mach-socfpga/scan_manager.c

259 lines
6.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2013 Altera Corporation <www.altera.com>
*/
#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/freeze_controller.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/system_manager.h>
#include <linux/delay.h>
/*
* Maximum polling loop to wait for IO scan chain engine becomes idle
* to prevent infinite loop. It is important that this is NOT changed
* to delay using timer functions, since at the time this function is
* called, timer might not yet be inited.
*/
#define SCANMGR_MAX_DELAY 100
/*
* Maximum length of TDI_TDO packet payload is 128 bits,
* represented by (length - 1) in TDI_TDO header.
*/
#define TDI_TDO_MAX_PAYLOAD 127
#define SCANMGR_STAT_ACTIVE (1 << 31)
#define SCANMGR_STAT_WFIFOCNT_MASK 0x70000000
static const struct socfpga_scan_manager *scan_manager_base =
(void *)(SOCFPGA_SCANMGR_ADDRESS);
static const struct socfpga_freeze_controller *freeze_controller_base =
(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
/**
* scan_chain_engine_is_idle() - Check if the JTAG scan chain is idle
* @max_iter: Maximum number of iterations to wait for idle
*
* Function to check IO scan chain engine status and wait if the engine is
* is active. Poll the IO scan chain engine till maximum iteration reached.
*/
static u32 scan_chain_engine_is_idle(u32 max_iter)
{
const u32 mask = SCANMGR_STAT_ACTIVE | SCANMGR_STAT_WFIFOCNT_MASK;
u32 status;
/* Poll the engine until the scan engine is inactive. */
do {
status = readl(&scan_manager_base->stat);
if (!(status & mask))
return 0;
} while (max_iter--);
return -ETIMEDOUT;
}
#define JTAG_BP_INSN (1 << 0)
#define JTAG_BP_TMS (1 << 1)
#define JTAG_BP_PAYLOAD (1 << 2)
#define JTAG_BP_2BYTE (1 << 3)
#define JTAG_BP_4BYTE (1 << 4)
/**
* scan_mgr_jtag_io() - Access the JTAG chain
* @flags: Control flags, used to configure the action on the JTAG
* @iarg: Instruction argument
* @parg: Payload argument or data
*
* Perform I/O on the JTAG chain
*/
static void scan_mgr_jtag_io(const u32 flags, const u8 iarg, const u32 parg)
{
u32 data = parg;
if (flags & JTAG_BP_INSN) { /* JTAG instruction */
/*
* The SCC JTAG register is LSB first, so make
* space for the instruction at the LSB.
*/
data <<= 8;
if (flags & JTAG_BP_TMS) {
data |= (0 << 7); /* TMS instruction. */
data |= iarg & 0x3f; /* TMS arg is 6 bits. */
if (flags & JTAG_BP_PAYLOAD)
data |= (1 << 6);
} else {
data |= (1 << 7); /* TDI/TDO instruction. */
data |= iarg & 0xf; /* TDI/TDO arg is 4 bits. */
if (flags & JTAG_BP_PAYLOAD)
data |= (1 << 4);
}
}
if (flags & JTAG_BP_4BYTE)
writel(data, &scan_manager_base->fifo_quad_byte);
else if (flags & JTAG_BP_2BYTE)
writel(data & 0xffff, &scan_manager_base->fifo_double_byte);
else
writel(data & 0xff, &scan_manager_base->fifo_single_byte);
}
/**
* scan_mgr_jtag_insn_data() - Send JTAG instruction and data
* @iarg: Instruction argument
* @data: Associated data
* @dlen: Length of data in bits
*
* This function is used when programming the IO chains to submit the
* instruction followed by variable length payload.
*/
static int
scan_mgr_jtag_insn_data(const u8 iarg, const unsigned long *data,
const unsigned int dlen)
{
int i, j;
scan_mgr_jtag_io(JTAG_BP_INSN | JTAG_BP_2BYTE, iarg, dlen - 1);
/* 32 bits or more remain */
for (i = 0; i < dlen / 32; i++)
scan_mgr_jtag_io(JTAG_BP_4BYTE, 0x0, data[i]);
if ((dlen % 32) > 24) { /* 31...24 bits remain */
scan_mgr_jtag_io(JTAG_BP_4BYTE, 0x0, data[i]);
} else if (dlen % 32) { /* 24...1 bit remain */
for (j = 0; j < dlen % 32; j += 8)
scan_mgr_jtag_io(0, 0x0, data[i] >> j);
}
return scan_chain_engine_is_idle(SCANMGR_MAX_DELAY);
}
/**
* scan_mgr_io_scan_chain_prg() - Program HPS IO Scan Chain
* @io_scan_chain_id: IO scan chain ID
*/
static int scan_mgr_io_scan_chain_prg(const unsigned int io_scan_chain_id)
{
u32 io_scan_chain_len_in_bits;
const unsigned long *iocsr_scan_chain;
unsigned int rem, idx = 0;
int ret;
ret = iocsr_get_config_table(io_scan_chain_id, &iocsr_scan_chain,
&io_scan_chain_len_in_bits);
if (ret)
return 1;
/*
* De-assert reinit if the IO scan chain is intended for HIO. In
* this, its the chain 3.
*/
if (io_scan_chain_id == 3)
clrbits_le32(&freeze_controller_base->hioctrl,
SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
/*
* Check if the scan chain engine is inactive and the
* WFIFO is empty before enabling the IO scan chain
*/
ret = scan_chain_engine_is_idle(SCANMGR_MAX_DELAY);
if (ret)
return ret;
/*
* Enable IO Scan chain based on scan chain id
* Note: only one chain can be enabled at a time
*/
setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
/* Program IO scan chain. */
while (io_scan_chain_len_in_bits) {
if (io_scan_chain_len_in_bits > 128)
rem = 128;
else
rem = io_scan_chain_len_in_bits;
ret = scan_mgr_jtag_insn_data(0x0, &iocsr_scan_chain[idx], rem);
if (ret)
goto error;
io_scan_chain_len_in_bits -= rem;
idx += 4;
}
/* Disable IO Scan chain when configuration done*/
clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
return 0;
error:
/* Disable IO Scan chain when error detected */
clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
return ret;
}
int scan_mgr_configure_iocsr(void)
{
int status = 0;
/* configure the IOCSR through scan chain */
status |= scan_mgr_io_scan_chain_prg(0);
status |= scan_mgr_io_scan_chain_prg(1);
status |= scan_mgr_io_scan_chain_prg(2);
status |= scan_mgr_io_scan_chain_prg(3);
return status;
}
/**
* scan_mgr_get_fpga_id() - Obtain FPGA JTAG ID
*
* This function obtains JTAG ID from the FPGA TAP controller.
*/
u32 scan_mgr_get_fpga_id(void)
{
const unsigned long data = 0;
u32 id = 0xffffffff;
int ret;
/* Enable HPS to talk to JTAG in the FPGA through the System Manager */
writel(0x1, socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SCANMGRGRP_CTRL);
/* Enable port 7 */
writel(0x80, &scan_manager_base->en);
/* write to CSW to make s2f_ntrst reset */
writel(0x02, &scan_manager_base->stat);
/* Add a pause */
mdelay(1);
/* write 0x00 to CSW to clear the s2f_ntrst */
writel(0, &scan_manager_base->stat);
/*
* Go to Test-Logic-Reset state.
* This sets TAP controller into IDCODE mode.
*/
scan_mgr_jtag_io(JTAG_BP_INSN | JTAG_BP_TMS, 0x1f | (1 << 5), 0x0);
/* Go to Run-Test/Idle -> DR-Scan -> Capture-DR -> Shift-DR state. */
scan_mgr_jtag_io(JTAG_BP_INSN | JTAG_BP_TMS, 0x02 | (1 << 4), 0x0);
/*
* Push 4 bytes of data through TDI->DR->TDO.
*
* Length of TDI data is 32bits (length - 1) and they are only
* zeroes as we care only for TDO data.
*/
ret = scan_mgr_jtag_insn_data(0x4, &data, 32);
/* Read 32 bit from captured JTAG data. */
if (!ret)
id = readl(&scan_manager_base->fifo_quad_byte);
/* Disable all port */
writel(0, &scan_manager_base->en);
writel(0, socfpga_get_sysmgr_addr() + SYSMGR_GEN5_SCANMGRGRP_CTRL);
return id;
}