u-boot/board/davinci/dm355evm/config.mk

#
# Spectrum Digital DM355 EVM board
#	dm355evm board has 1 bank of 128 MB DDR RAM
#	Physical Address: 8000'0000 to 8800'0000
#
# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
#

#Provide at least 16MB spacing between us and the Linux Kernel image
CONFIG_SYS_TEXT_BASE = 0x81080000
dm355 evm support Initial U-Boot support for the DaVinci DM355 EVM. This is a board from Spectrum Digital. Board docs include schematic and firmware for its microcontroller: http://c6000.spectrumdigital.com/evmdm355/revd/ Most of the DM355 chip is fully documented by TI, the most notable exception being the MPEG/JPEG coprocessor (programmable using codecs available at no cost from TI), which is omitted from its DM335 sibling: http://focus.ti.com/docs/prod/folders/print/tms320dm355.html This version can boot from the on-board DM9000 Ethernet chip, after being loaded (from NAND, MMC/SD, or UART). In the near future, NAND and USB support could be added ... NAND support is being held back until the support for the 4-bit ECC hardware is ready. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> 2009-05-15 21:48:37 +00:00			`#`
			`# Spectrum Digital DM355 EVM board`
			`# dm355evm board has 1 bank of 128 MB DDR RAM`
			`# Physical Address: 8000'0000 to 8800'0000`
			`#`
			`# Linux Kernel is expected to be at 8000'8000, entry 8000'8000`
			`# (mem base + reserved)`
			`#`

			`#Provide at least 16MB spacing between us and the Linux Kernel image`
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de> 2010-10-07 19:51:12 +00:00			`CONFIG_SYS_TEXT_BASE = 0x81080000`