Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/riscv/lib/Makefile

47 lines
1.4 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
riscv: nx25: lib: Add relative lib funcs to support RISC-V Add makefile, interrupts.c and boot.c,... functions to support RISC-V arch. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:49 +00:00
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# Copyright (C) 2017 Andes Technology Corporation
# Rick Chen, Andes Technology Corporation <rick@andestech.com>
obj-$(CONFIG_CMD_BOOTM) += bootm.o
RISCV: image: Add booti support This patch adds booti support for RISC-V Linux kernel. The existing bootm method will also continue to work as it is. It depends on the following kernel patch which adds the header to the flat Image. Gzip compressed Image (Image.gz) support is not enabled with this patch. https://patchwork.kernel.org/patch/10925543/ Tested on HiFive Unleashed and QEMU. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Karsten Merker <merker@debian.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2019-05-07 00:49:39 +00:00
obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
riscv: nx25: lib: Add relative lib funcs to support RISC-V Add makefile, interrupts.c and boot.c,... functions to support RISC-V arch. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:49 +00:00
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += cache.o
riscv: lib: implement enable_caches for sifive cache The enable_caches is a generic hook for architecture-implemented, we define this function to enable composable cache of sifive platforms. In sifive_cache, it invokes the generic cache_enable interface of cache uclass to execute the relative implementation in SiFive ccache driver. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01 07:01:41 +00:00
obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o
riscv: add run mode configuration for SPL U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:43 +00:00
ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y)
riscv: Split SiFive CLINT support between SPL and U-Boot proper At present there is only one Kconfig option CONFIG_SIFIVE_CLINT to control the enabling of SiFive CLINT support in both SPL (M-mode) and U-Boot proper (S-mode). So for a typical SPL config that the SiFive CLINT driver is enabled in both SPL and U-Boot proper, that means the S-mode U-Boot tries to access the memory-mapped CLINT registers directly, instead of the normal 'rdtime' instruction. This was not a problem before, as the hardware does not forbid the access from S-mode. However this becomes an issue now with OpenSBI commit 8b569803475e ("lib: utils/sys: Add CLINT memregion in the root domain") that the SiFive CLINT register space is protected by PMP for M-mode access only. U-Boot proper does not boot any more with the latest OpenSBI, that access exceptions are fired forever from U-Boot when trying to read the timer value via the SiFive CLINT driver in U-Boot. To solve this, we need to split current SiFive CLINT support between SPL and U-Boot proper, using 2 separate Kconfig options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-05-11 12:04:12 +00:00
obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint.o
riscv: Rename Andes PLIC to PLICSW As PLICSW is used to trigger the software interrupt, we should rename Andes PLIC configuration and file name to reflect the usage. This patch also updates PLMT and PLICSW compatible strings to be consistent with OpenSBI fdt driver. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2022-10-25 15:03:50 +00:00
obj-$(CONFIG_ANDES_PLICSW) += andes_plicsw.o
riscv: add run mode configuration for SPL U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:43 +00:00
else
riscv: Add basic support for SBI v0.2 The SBI v0.2 introduces a base extension which is backward compatible with v0.1. Implement all helper functions and minimum required SBI calls from v0.2 for now. All other base extension function will be added later as per need. As v0.2 calling convention is backward compatible with v0.1, remove the v0.1 helper functions and just use v0.2 calling convention. Add a new Kconfig options CONFIG_SBI for the new SBI v0.2 codes, and let CONFIG_SBI_IPI depend on it. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407363/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-10 02:35:28 +00:00
obj-$(CONFIG_SBI) += sbi.o
riscv: add run mode configuration for SPL U-Boot SPL can be run in a different privilege mode from U-Boot proper. Add new configuration entries for SPL to allow the run mode to be configured independently of U-Boot proper. Extend all uses of the CONFIG_RISCV_SMODE and CONFIG_RISCV_MMODE configuration symbols to also cover the SPL equivalents. Ensure that files compatible with only one privilege mode are not included in builds targeting an incompatible privilege mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:43 +00:00
obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
endif
riscv: nx25: lib: Add relative lib funcs to support RISC-V Add makefile, interrupts.c and boot.c,... functions to support RISC-V arch. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2017-12-26 05:55:49 +00:00
obj-y += interrupts.o
riscv: Do not build reset.c if SYSRESET is on SYSRESET uclass driver already provides all the reset APIs, hence exclude our own ad-hoc reset.c implementation. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-06-23 05:29:44 +00:00
ifeq ($(CONFIG_$(SPL_)SYSRESET),)
riscv: Move do_reset() to a common place We don't have a reset method on any RISC-V board yet. Instead of adding the same 'unsupported' message for each CPU variant it might make more sense to add a generic do_reset function for all CPU variants to lib/, similar to the one for ARM (arch/arm/lib/reset.c). Suggested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-09-26 13:55:22 +00:00
obj-y += reset.o
riscv: Do not build reset.c if SYSRESET is on SYSRESET uclass driver already provides all the reset APIs, hence exclude our own ad-hoc reset.c implementation. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-06-23 05:29:44 +00:00
endif
riscv: Add setjmp/longjmp code To support efi_loader we need to have platform support for setjmp/longjmp. Add it here. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23 05:59:43 +00:00
obj-y += setjmp.o
riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-16 15:09:30 +00:00
obj-$(CONFIG_$(SPL_)SMP) += smp.o
riscv: add SPL support U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:45 +00:00
obj-$(CONFIG_SPL_BUILD) += spl.o
riscv: Provide a mechanism to fix DT for reserved memory In RISC-V, M-mode software can reserve physical memory regions by setting appropriate physical memory protection (PMP) csr. As the PMP csr are accessible only in M-mode, S-mode U-Boot can not read this configuration directly. However, M-mode software can pass this information via reserved-memory node in device tree so that S-mode software can access this information. This patch provides a framework to copy to the reserved-memory node from one DT to another. This will be used to update the DT used by U-Boot and the DT passed to the next stage OS. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-21 18:15:01 +00:00
obj-y += fdt_fixup.o
riscv: Add EFI application infrastructure The hello world binary and a few selftests require to build EFI target binaries, not just the EFI host environment. This patch adds all required files to generate an EFI binary for RISC-V. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23 05:59:45 +00:00
# For building EFI apps
Add support for stack-protector Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-11 09:21:58 +00:00
CFLAGS_NON_EFI := -fstack-protector-strong
riscv: Add EFI application infrastructure The hello world binary and a few selftests require to build EFI target binaries, not just the EFI host environment. This patch adds all required files to generate an EFI binary for RISC-V. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-23 05:59:45 +00:00
CFLAGS_$(EFI_CRT0) := $(CFLAGS_EFI)
CFLAGS_REMOVE_$(EFI_CRT0) := $(CFLAGS_NON_EFI)
CFLAGS_$(EFI_RELOC) := $(CFLAGS_EFI)
CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI)
extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC)
extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
riscv: assembler versions of memcpy, memmove, memset Provide optimized versions of memcpy(), memmove(), memset() copied from the Linux kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-03-27 11:37:04 +00:00
obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o
obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
arch/riscv: add semihosting support for RISC-V We add RISC-V semihosting based serial console for JTAG based early debugging. The RISC-V semihosting specification is available at: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-07 11:42:35 +00:00
obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o
Reference in a new issue Copy permalink