u-boot/common/spl/Makefile

#
# (C) Copyright 2012
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <aneesh@ti.com>
#
# SPDX-License-Identifier:	GPL-2.0+
#
# Based on common/Makefile.
#

ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o
obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
obj-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
endif
SPL: Move the omap SPL framework to common/spl Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com> 2012-08-13 19:03:19 +00:00			`#`
			`# (C) Copyright 2012`
			`# Texas Instruments Incorporated - http://www.ti.com/`
			`# Aneesh V <aneesh@ti.com>`
			`#`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
SPL: Move the omap SPL framework to common/spl Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com> 2012-08-13 19:03:19 +00:00			`#`
			`# Based on common/Makefile.`
			`#`

			`ifdef CONFIG_SPL_BUILD`
common: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:59 +00:00			`obj-$(CONFIG_SPL_FRAMEWORK) += spl.o`
spl: Add an option to load a FIT containing U-Boot This provides a way to load a FIT containing U-Boot and a selection of device tree files. The board can select the correct device tree by probing the hardware. Then U-Boot is started with the selected device tree. Signed-off-by: Simon Glass <sjg@chromium.org> 2016-02-23 05:55:56 +00:00			`obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o`
common: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:59 +00:00			`obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o`
			`obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o`
			`obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o`
			`obj-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o`
			`obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o`
			`obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o`
spl: common: Support for USB MSD FAT image loading Add SPL support to be able to detect a USB Mass Storage device connected to a USB host. Once a USB Mass storage device is detected the SPL will load the u-boot.img from a FAT partition to target address. Signed-off-by: Dan Murphy <dmurphy@ti.com> 2014-01-16 17:23:30 +00:00			`obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o`
spl: common: Move FAT funcs to a common file Move the FAT functions to a common location for reuse. Signed-off-by: Dan Murphy <dmurphy@ti.com> 2014-01-16 17:23:29 +00:00			`obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o`
spl: Add EXT support to SPL Add EXT filesystem support to SPL. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> [trini: Fix a warning and checkpatch problems] Signed-off-by: Tom Rini <trini@ti.com> 2014-10-15 15:53:12 +00:00			`obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o`
common: spl: Add spl sata boot support Add spl_sata to read a fat partition from a bootable SATA drive. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> 2014-02-03 12:59:01 +00:00			`obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o`
SPL: Move the omap SPL framework to common/spl Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com> 2012-08-13 19:03:19 +00:00			`endif`