mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
130 lines
3.8 KiB
ReStructuredText
130 lines
3.8 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0+
|
||
|
|
|
||
|
|
Sipeed's Lichee PI 4A based on T-HEAD TH1520 SoC
|
||
|
|
================================================
|
||
|
|
|
||
|
|
The LicheePi4A is a high-performance RISC-V SBC based on TH1520(4xC910@1.85GHz),
|
||
|
|
comes with 4/8/16 GB RAM, and up to 128GB eMMC, and rich peripherals.
|
||
|
|
|
||
|
|
- SoC T-HEAD TH1520 SoC
|
||
|
|
- System Memory 4GB, 8GB, or 16GB LPDDR4X
|
||
|
|
- Storage eMMC flash with 8/32/128 GB
|
||
|
|
- external microSD slot
|
||
|
|
- Networking 2x Gigabit Ethernet
|
||
|
|
- WiFi+BT
|
||
|
|
- Display HDMI2.0, 4-lane MIPI DSI
|
||
|
|
- Camera 4-lane MIPI CSI + 2x2-lane MIPI CSI
|
||
|
|
- Audio Onboard Speaker, 2xMEMS MIC, 3.5mm headphone jack
|
||
|
|
- USB 4xUSB3.0 Type-A, 1xUSB2.0 Type-C
|
||
|
|
- GPIO 2x10Pin breakout, UART/IIC/SPI
|
||
|
|
- Power DC 12V/2A, POE 5V/2.4A, USB Type-C 5V/2A
|
||
|
|
|
||
|
|
TH1520 RISC-V SoC
|
||
|
|
-----------------
|
||
|
|
|
||
|
|
The TH1520 SoC consist of quad-core RISC-V Xuantie C910 (RV64GCV) processor,
|
||
|
|
Xuantie C906 audio DSP, low power Xuantie E902 core, it also integrate
|
||
|
|
Imagination GPU for graphics, and 4 TOPS NPU for AI acceleration.
|
||
|
|
|
||
|
|
Mainline support
|
||
|
|
----------------
|
||
|
|
|
||
|
|
The support for following drivers are already enabled:
|
||
|
|
|
||
|
|
1. ns16550 UART Driver.
|
||
|
|
|
||
|
|
Building
|
||
|
|
~~~~~~~~
|
||
|
|
|
||
|
|
1. Add the RISC-V toolchain to your PATH.
|
||
|
|
2. Setup ARCH & cross compilation environment variable:
|
||
|
|
|
||
|
|
.. code-block:: none
|
||
|
|
|
||
|
|
export CROSS_COMPILE=<riscv64 toolchain prefix>
|
||
|
|
|
||
|
|
The U-Boot is capable of running in M-Mode, so we can directly build it.
|
||
|
|
|
||
|
|
.. code-block:: console
|
||
|
|
|
||
|
|
cd <U-Boot-dir>
|
||
|
|
make th1520_lpi4a_defconfig
|
||
|
|
make
|
||
|
|
|
||
|
|
This will generate u-boot-dtb.bin
|
||
|
|
|
||
|
|
Booting
|
||
|
|
~~~~~~~
|
||
|
|
|
||
|
|
Currently, we rely on vendor u-boot to initialize the clock, pinctrl subsystem,
|
||
|
|
and chain load the mainline u-boot image either via tftp or emmc storage,
|
||
|
|
then bootup from it.
|
||
|
|
|
||
|
|
Sample boot log from Lichee PI 4A board via tftp
|
||
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
|
|
||
|
|
.. code-block:: none
|
||
|
|
|
||
|
|
brom_ver 8
|
||
|
|
[APP][E] protocol_connect failed, exit.
|
||
|
|
|
||
|
|
U-Boot SPL 2020.01-00016-g8c870a6be8 (May 20 2023 - 01:04:49 +0000)
|
||
|
|
FM[1] lpddr4x dualrank freq=3733 64bit dbi_off=n sdram init
|
||
|
|
ddr initialized, jump to uboot
|
||
|
|
image has no header
|
||
|
|
|
||
|
|
|
||
|
|
U-Boot 2020.01-00016-g8c870a6be8 (May 20 2023 - 01:04:49 +0000)
|
||
|
|
|
||
|
|
CPU: rv64imafdcvsu
|
||
|
|
Model: T-HEAD c910 light
|
||
|
|
DRAM: 8 GiB
|
||
|
|
C910 CPU FREQ: 750MHz
|
||
|
|
AHB2_CPUSYS_HCLK FREQ: 250MHz
|
||
|
|
AHB3_CPUSYS_PCLK FREQ: 125MHz
|
||
|
|
PERISYS_AHB_HCLK FREQ: 250MHz
|
||
|
|
PERISYS_APB_PCLK FREQ: 62MHz
|
||
|
|
GMAC PLL POSTDIV FREQ: 1000MHZ
|
||
|
|
DPU0 PLL POSTDIV FREQ: 1188MHZ
|
||
|
|
DPU1 PLL POSTDIV FREQ: 1188MHZ
|
||
|
|
MMC: sdhci@ffe7080000: 0, sd@ffe7090000: 1
|
||
|
|
Loading Environment from MMC... OK
|
||
|
|
Error reading output register
|
||
|
|
Warning: cannot get lcd-en GPIO
|
||
|
|
LCD panel cannot be found : -121
|
||
|
|
splash screen startup cost 16 ms
|
||
|
|
In: serial
|
||
|
|
Out: serial
|
||
|
|
Err: serial
|
||
|
|
Net:
|
||
|
|
Warning: ethernet@ffe7070000 using MAC address from ROM
|
||
|
|
eth0: ethernet@ffe7070000ethernet@ffe7070000:0 is connected to ethernet@ffe7070000. Reconnecting to ethernet@ffe7060000
|
||
|
|
|
||
|
|
Warning: ethernet@ffe7060000 (eth1) using random MAC address - 42:25:d4:16:5f:fc
|
||
|
|
, eth1: ethernet@ffe7060000
|
||
|
|
Hit any key to stop autoboot: 2
|
||
|
|
ethernet@ffe7060000 Waiting for PHY auto negotiation to complete.. done
|
||
|
|
Speed: 1000, full duplex
|
||
|
|
Using ethernet@ffe7070000 device
|
||
|
|
TFTP from server 192.168.8.50; our IP address is 192.168.8.45
|
||
|
|
Filename 'u-boot-dtb.bin'.
|
||
|
|
Load address: 0x1c00000
|
||
|
|
Loading: * #########################
|
||
|
|
8 MiB/s
|
||
|
|
done
|
||
|
|
Bytes transferred = 376686 (5bf6e hex)
|
||
|
|
## Starting application at 0x01C00000 ...
|
||
|
|
|
||
|
|
U-Boot 2023.07-rc2-00004-g1befbe31c1 (May 23 2023 - 18:40:01 +0800)
|
||
|
|
|
||
|
|
CPU: rv64imafdc
|
||
|
|
Model: Sipeed Lichee Pi 4A
|
||
|
|
DRAM: 8 GiB
|
||
|
|
Core: 13 devices, 6 uclasses, devicetree: separate
|
||
|
|
Loading Environment from <NULL>... OK
|
||
|
|
In: serial@ffe7014000
|
||
|
|
Out: serial@ffe7014000
|
||
|
|
Err: serial@ffe7014000
|
||
|
|
Model: Sipeed Lichee Pi 4A
|
||
|
|
LPI4A=>
|