u-boot/include/configs/bk4r1.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2016 3ADEV <http://3adev.com>
 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
 *
 * Configuration settings for the phytec PCM-052 SoM-based BK4R1.
 */

/* Define the BK4r1-specific env commands */
#define PCM052_EXTRA_ENV_SETTINGS \
	"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"

/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
#define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; "

/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
#define PCM052_NET_INIT "run set_gpio122; "

/* add NOR to MTD env */

/* now include standard PCM052 config */

#include "configs/pcm052.h"
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
$Albert ARIBAUD \(3ADEV\)$ pcm052: add new BK4r1 target based on PCM052 SoM Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> 2016-09-26 07:08:08 +00:00			`/*`
			`* Copyright 2016 3ADEV <http://3adev.com>`
			`* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>`
			`*`
			`* Configuration settings for the phytec PCM-052 SoM-based BK4R1.`
			`*/`

			`/* Define the BK4r1-specific env commands */`
			`#define PCM052_EXTRA_ENV_SETTINGS \`
			`"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \`
			`"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"`

			`/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/`
			`#define PCM052_BOOTCOMMAND "run set_gpio103; sf probe; "`

			`/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */`
			`#define PCM052_NET_INIT "run set_gpio122; "`

			`/* add NOR to MTD env */`

			`/* now include standard PCM052 config */`

			`#include "configs/pcm052.h"`