u-boot/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h

/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 *
 */
#ifndef __FSL_STREAM_ID_H
#define __FSL_STREAM_ID_H

/*
 * Stream IDs on ls2080a devices are not hardwired and are
 * programmed by sw.  There are a limited number of stream IDs
 * available, and the partitioning of them is scenario dependent.
 * This header defines the partitioning between legacy, PCI,
 * and DPAA2 devices.
 *
 * This partitioning can be customized in this file depending
 * on the specific hardware config:
 *
 *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
 *     -all legacy devices get a unique stream ID assigned and programmed in
 *      their AMQR registers by u-boot
 *
 *  -PCIe
 *     -there is a range of stream IDs set aside for PCI in this
 *      file.  U-boot will scan the PCI bus and for each device discovered:
 *         -allocate a streamID
 *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
 *         -set a msi-map entry in the PEXn controller node in the
 *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
 *          for more info on the msi-map definition)
 *
 *  -DPAA2
 *     -u-boot will allocate a range of stream IDs to be used by the Management
 *      Complex for containers and will set these values in the MC DPC image.
 *     -the MC is responsible for allocating and setting up 'isolation context
 *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
 *
 * On ls2080a SoCs stream IDs are programmed in AMQ registers (32-bits) for
 * each of the different bus masters.  The relationship between
 * the AMQ registers and stream IDs is defined in the table below:
 *          AMQ bit    streamID bit
 *      ---------------------------
 *           PL[18]         9        // privilege bit
 *          BMT[17]         8        // bypass translation
 *           VA[16]         7        // reserved
 *             [15]         -        // unused
 *         ICID[14:7]       -        // unused
 *         ICID[6:0]        6-0      // isolation context id
 *     ----------------------------
 *
 */

#define AMQ_PL_MASK			(0x1 << 18)   /* priviledge bit */
#define AMQ_BMT_MASK			(0x1 << 17)   /* bypass bit */

#define FSL_INVALID_STREAM_ID		0

#define FSL_BYPASS_AMQ			(AMQ_PL_MASK | AMQ_BMT_MASK)

/* legacy devices */
#define FSL_USB1_STREAM_ID		1
#define FSL_USB2_STREAM_ID		2
#define FSL_SDMMC_STREAM_ID		3
#define FSL_SATA1_STREAM_ID		4
#define FSL_SATA2_STREAM_ID		5
#define FSL_DMA_STREAM_ID		6

/* PCI - programmed in PEXn_LUT */
#define FSL_PEX_STREAM_ID_START		7
#define FSL_PEX_STREAM_ID_END		22

/* DPAA2 - set in MC DPC and alloced by MC */
#define FSL_DPAA2_STREAM_ID_START	23
#define FSL_DPAA2_STREAM_ID_END		63

#endif