u-boot/include/configs/socfpga_de0_nano_soc.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
 */
#ifndef __CONFIG_TERASIC_DE0_H__
#define __CONFIG_TERASIC_DE0_H__

#include <asm/arch/base_addr_ac5.h>

/* Memory configurations */
#define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */

/* Booting Linux */
#define CONFIG_LOADADDR		0x01000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* Ethernet on SoC (EMAC) */

/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>

#endif	/* __CONFIG_TERASIC_DE0_H__ */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
arm: socfpga: Add support for the Terasic DE-0 Atlas board Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> 2015-09-01 22:41:52 +00:00			`/*`
			`* Copyright (C) 2015 Marek Vasut <marex@denx.de>`
			`*/`
			`#ifndef __CONFIG_TERASIC_DE0_H__`
			`#define __CONFIG_TERASIC_DE0_H__`

ARM: socfpga: rename the cyclone5 and arria5 base address file When adding support for the Arria10 platform, we're going to name the file base_addr_a10.h, so to be systematic about it, rename the socfpga_base_addr.h to be base_addr_ac5.h for the Arria5 and Cyclone5 platform. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> 2015-11-23 23:27:17 +00:00			`#include <asm/arch/base_addr_ac5.h>`
arm: socfpga: Add support for the Terasic DE-0 Atlas board Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> 2015-09-01 22:41:52 +00:00
			`/* Memory configurations */`
			`#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */`

			`/* Booting Linux */`
			`#define CONFIG_LOADADDR 0x01000000`
			`#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR`

			`/* Ethernet on SoC (EMAC) */`

			`/* The rest of the configuration is shared */`
			`#include <configs/socfpga_common.h>`

			`#endif /* __CONFIG_TERASIC_DE0_H__ */`