u-boot/arch/arm/include/asm/arch-am33xx/gpio.h

/*
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef _GPIO_AM33xx_H
#define _GPIO_AM33xx_H

#include <asm/omap_gpio.h>

#define OMAP_MAX_GPIO		128

#define AM33XX_GPIO0_BASE       0x44E07000
#define AM33XX_GPIO1_BASE       0x4804C000
#define AM33XX_GPIO2_BASE       0x481AC000
#define AM33XX_GPIO3_BASE       0x481AE000

#define GPIO_22			22

/* GPIO CTRL register */
#define GPIO_CTRL_DISABLEMODULE_SHIFT	0
#define GPIO_CTRL_DISABLEMODULE_MASK	(1 << 0)
#define GPIO_CTRL_ENABLEMODULE		GPIO_CTRL_DISABLEMODULE_MASK

/* GPIO OUTPUT ENABLE register */
#define GPIO_OE_ENABLE(x)		(1 << x)

/* GPIO SETDATAOUT register */
#define GPIO_SETDATAOUT(x)		(1 << x)
#endif /* _GPIO_AM33xx_H */
omap: am33xx: enable gpio support This patch uses the code in omap-common to support gpio modules 1-3 on am33xx based boards. It adds base address and register definitions, enables clocks to the modules, and enables building the common gpio code for CONFIG_AM33XX as well as CONFIG_OMAP Signed-off-by: Steve Sakoman <steve@sakoman.com> 2012-06-04 05:35:34 +00:00			`/*`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`* SPDX-License-Identifier: GPL-2.0+`
omap: am33xx: enable gpio support This patch uses the code in omap-common to support gpio modules 1-3 on am33xx based boards. It adds base address and register definitions, enables clocks to the modules, and enables building the common gpio code for CONFIG_AM33XX as well as CONFIG_OMAP Signed-off-by: Steve Sakoman <steve@sakoman.com> 2012-06-04 05:35:34 +00:00			`*/`
			`#ifndef _GPIO_AM33xx_H`
			`#define _GPIO_AM33xx_H`

			`#include <asm/omap_gpio.h>`

ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5 The omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs. These SoCs have different gpio count but currently omap_gpio driver uses hard coded 192 which is wrong. This patch fixes this issue by: 1. Move define of OMAP_MAX_GPIO to all arch/arm/include/asm/arch-omap*/gpio.h. 2. Update gpio bank settings and enable GPIO modules 7 & 8 clocks for OMAP5. Thanks for Lubomir Popov to provide valuable comments to fix this issue. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Acked-by: Heiko Schocher <hs@denx.de> 2013-06-21 10:54:25 +00:00			`#define OMAP_MAX_GPIO 128`

omap: am33xx: enable gpio support This patch uses the code in omap-common to support gpio modules 1-3 on am33xx based boards. It adds base address and register definitions, enables clocks to the modules, and enables building the common gpio code for CONFIG_AM33XX as well as CONFIG_OMAP Signed-off-by: Steve Sakoman <steve@sakoman.com> 2012-06-04 05:35:34 +00:00			`#define AM33XX_GPIO0_BASE 0x44E07000`
			`#define AM33XX_GPIO1_BASE 0x4804C000`
			`#define AM33XX_GPIO2_BASE 0x481AC000`
			`#define AM33XX_GPIO3_BASE 0x481AE000`

ARM: AM43xx: GP_EVM: Add support for DDR3 GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH). Adding details for the same. Below is the brief description of DDR3 init sequence(SW leveling): -> Enable VTT regulator -> Configure VTP -> Configure DDR IO settings -> Disable initialization and refreshes until EMIF registers are programmed. -> Program Timing registers -> Program leveling registers -> Program PHY control and Temp alert and ZQ config registers. -> Enable initialization and refreshes and configure SDRAM CONFIG register Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> 2013-12-10 09:32:23 +00:00			`#define GPIO_22 22`

			`/* GPIO CTRL register */`
			`#define GPIO_CTRL_DISABLEMODULE_SHIFT 0`
			`#define GPIO_CTRL_DISABLEMODULE_MASK (1 << 0)`
			`#define GPIO_CTRL_ENABLEMODULE GPIO_CTRL_DISABLEMODULE_MASK`

			`/* GPIO OUTPUT ENABLE register */`
			`#define GPIO_OE_ENABLE(x) (1 << x)`

			`/* GPIO SETDATAOUT register */`
			`#define GPIO_SETDATAOUT(x) (1 << x)`
omap: am33xx: enable gpio support This patch uses the code in omap-common to support gpio modules 1-3 on am33xx based boards. It adds base address and register definitions, enables clocks to the modules, and enables building the common gpio code for CONFIG_AM33XX as well as CONFIG_OMAP Signed-off-by: Steve Sakoman <steve@sakoman.com> 2012-06-04 05:35:34 +00:00			`#endif /* _GPIO_AM33xx_H */`