u-boot/doc/README.at91

Atmel AT91 Evaluation kits

http://atmel.com/dyn/products/tools.asp?family_id=605#1443

------------------------------------------------------------------------------
AT91SAM9260EK & AT91SAM9XEEK
------------------------------------------------------------------------------

Memory map
	0x20000000 - 23FFFFFF	SDRAM (64 MB)
	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J13)
	0xD0000000 - Dxxxxxxx	Soldered Atmel Dataflash

Environment variables

	U-Boot environment variables can be stored at different places:
		- Dataflash on SPI chip select 1 (default)
		- Dataflash on SPI chip select 0 (dataflash card)
		- Nand flash.

	You can choose your storage location at config step (here for at91sam9260ek) :
		make at91sam9260ek_config		- use data flash (spi cs1) (default)
		make at91sam9260ek_nandflash_config	- use nand flash
		make at91sam9260ek_dataflash_cs0_config	- use data flash (spi cs0)
		make at91sam9260ek_dataflash_cs1_config	- use data flash (spi cs1)


------------------------------------------------------------------------------
AT91SAM9261EK
------------------------------------------------------------------------------

Memory map
	0x20000000 - 23FFFFFF	SDRAM (64 MB)
	0xC0000000 - Cxxxxxxx	Soldered Atmel Dataflash
	0xD0000000 - Dxxxxxxx	Atmel Dataflash card (J22)

Environment variables

	U-Boot environment variables can be stored at different places:
		- Dataflash on SPI chip select 0 (default)
		- Dataflash on SPI chip select 3 (dataflash card)
		- Nand flash.

	You can choose your storage location at config step (here for at91sam9260ek) :
		make at91sam9261ek_config		- use data flash (spi cs0) (default)
		make at91sam9261ek_nandflash_config	- use nand flash
		make at91sam9261ek_dataflash_cs0_config	- use data flash (spi cs0)
		make at91sam9261ek_dataflash_cs3_config	- use data flash (spi cs3)


------------------------------------------------------------------------------
AT91SAM9263EK
------------------------------------------------------------------------------

Memory map
	0x20000000 - 23FFFFFF	SDRAM (64 MB)
	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J9)

Environment variables

	U-Boot environment variables can be stored at different places:
		- Dataflash on SPI chip select 0 (dataflash card)
		- Nand flash.

	You can choose your storage location at config step (here for at91sam9260ek) :
		make at91sam9263ek_config		- use data flash (spi cs0) (default)
		make at91sam9263ek_nandflash_config	- use nand flash
		make at91sam9263ek_dataflash_cs0_config	- use data flash (spi cs0)


------------------------------------------------------------------------------
AT91SAM9RLEK
------------------------------------------------------------------------------

Memory map
	0x20000000 - 23FFFFFF	SDRAM (64 MB)
	0xC0000000 - Cxxxxxxx	Soldered Atmel Dataflash

Environment variables

	U-Boot environment variables can be stored at different places:
		- Dataflash on SPI chip select 0
		- Nand flash.

	You can choose your storage location at config step (here for at91sam9260ek) :
		make at91sam9263ek_config		- use data flash (spi cs0) (default)
		make at91sam9263ek_nandflash_config	- use nand flash
		make at91sam9263ek_dataflash_cs0_config	- use data flash (spi cs0)
at91: Choose environment variables location within make config target This patch adds the possiblity to choose the media where the environment will be located. This allow to choose this fundamental configuration without editing config files. Documentation file added. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Stelian Pop <stelian@popies.net> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2008-12-06 12:11:14 +00:00			`Atmel AT91 Evaluation kits`

			`http://atmel.com/dyn/products/tools.asp?family_id=605#1443`

			`------------------------------------------------------------------------------`
at91: add at91sam9xeek board support At91sam9xe is basically an at91sam9260 with embedded flash. We can manage it as another entry for at91sam9260 in the Makefile. Check documentation at : http://www.atmel.com/dyn/products/product_card.asp?part_id=4263 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2009-01-06 20:13:14 +00:00			`AT91SAM9260EK & AT91SAM9XEEK`
at91: Choose environment variables location within make config target This patch adds the possiblity to choose the media where the environment will be located. This allow to choose this fundamental configuration without editing config files. Documentation file added. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Stelian Pop <stelian@popies.net> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2008-12-06 12:11:14 +00:00			`------------------------------------------------------------------------------`

			`Memory map`
			`0x20000000 - 23FFFFFF SDRAM (64 MB)`
			`0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)`
			`0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash`

			`Environment variables`

			`U-Boot environment variables can be stored at different places:`
			`- Dataflash on SPI chip select 1 (default)`
			`- Dataflash on SPI chip select 0 (dataflash card)`
			`- Nand flash.`

			`You can choose your storage location at config step (here for at91sam9260ek) :`
			`make at91sam9260ek_config - use data flash (spi cs1) (default)`
			`make at91sam9260ek_nandflash_config - use nand flash`
			`make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)`
			`make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)`


			`------------------------------------------------------------------------------`
			`AT91SAM9261EK`
			`------------------------------------------------------------------------------`

			`Memory map`
			`0x20000000 - 23FFFFFF SDRAM (64 MB)`
			`0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash`
			`0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)`

			`Environment variables`

			`U-Boot environment variables can be stored at different places:`
			`- Dataflash on SPI chip select 0 (default)`
			`- Dataflash on SPI chip select 3 (dataflash card)`
			`- Nand flash.`

			`You can choose your storage location at config step (here for at91sam9260ek) :`
			`make at91sam9261ek_config - use data flash (spi cs0) (default)`
			`make at91sam9261ek_nandflash_config - use nand flash`
			`make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)`
			`make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)`


			`------------------------------------------------------------------------------`
			`AT91SAM9263EK`
			`------------------------------------------------------------------------------`

			`Memory map`
			`0x20000000 - 23FFFFFF SDRAM (64 MB)`
			`0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9)`

			`Environment variables`

			`U-Boot environment variables can be stored at different places:`
			`- Dataflash on SPI chip select 0 (dataflash card)`
			`- Nand flash.`

			`You can choose your storage location at config step (here for at91sam9260ek) :`
			`make at91sam9263ek_config - use data flash (spi cs0) (default)`
			`make at91sam9263ek_nandflash_config - use nand flash`
			`make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)`


			`------------------------------------------------------------------------------`
			`AT91SAM9RLEK`
			`------------------------------------------------------------------------------`

			`Memory map`
			`0x20000000 - 23FFFFFF SDRAM (64 MB)`
			`0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash`

			`Environment variables`

			`U-Boot environment variables can be stored at different places:`
			`- Dataflash on SPI chip select 0`
			`- Nand flash.`

			`You can choose your storage location at config step (here for at91sam9260ek) :`
			`make at91sam9263ek_config - use data flash (spi cs0) (default)`
			`make at91sam9263ek_nandflash_config - use nand flash`
			`make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)`