Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 03:03:05 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/pinctrl/sunxi/pinctrl-sunxi.c

899 lines
24 KiB
C
Raw Normal View History

sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <clk.h>
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <errno.h>
#include <malloc.h>
#include <asm/gpio.h>
extern U_BOOT_DRIVER(gpio_sunxi);
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
/*
* This structure implements a simplified view of the possible pinmux settings:
* Each mux value is assumed to be the same for a given function, across the
* pins in each group (almost universally true, with same rare exceptions not
* relevant to U-Boot), but also across different ports (not true in many
* cases). We ignore the first problem, and work around the latter by just
* supporting one particular port for a each function. This works fine for all
* board configurations so far. If this would need to be revisited, we could
* add a "u8 port;" below and match that, with 0 encoding the "don't care" case.
*/
struct sunxi_pinctrl_function {
const char name[sizeof("gpio_out")];
u8 mux;
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
struct sunxi_pinctrl_desc {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
const struct sunxi_pinctrl_function *functions;
u8 num_functions;
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
u8 first_bank;
u8 num_banks;
};
struct sunxi_pinctrl_plat {
struct sunxi_gpio __iomem *base;
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static int sunxi_pinctrl_get_pins_count(struct udevice *dev)
{
const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
return desc->num_banks * SUNXI_GPIOS_PER_BANK;
}
static const char *sunxi_pinctrl_get_pin_name(struct udevice *dev,
uint pin_selector)
{
const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
static char pin_name[sizeof("PN31")];
snprintf(pin_name, sizeof(pin_name), "P%c%d",
pin_selector / SUNXI_GPIOS_PER_BANK + desc->first_bank + 'A',
pin_selector % SUNXI_GPIOS_PER_BANK);
return pin_name;
}
static int sunxi_pinctrl_get_functions_count(struct udevice *dev)
{
const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
return desc->num_functions;
}
static const char *sunxi_pinctrl_get_function_name(struct udevice *dev,
uint func_selector)
{
const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
return desc->functions[func_selector].name;
}
static int sunxi_pinctrl_pinmux_set(struct udevice *dev, uint pin_selector,
uint func_selector)
{
const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev);
struct sunxi_pinctrl_plat *plat = dev_get_plat(dev);
int bank = pin_selector / SUNXI_GPIOS_PER_BANK;
int pin = pin_selector % SUNXI_GPIOS_PER_BANK;
debug("set mux: %-4s => %s (%d)\n",
sunxi_pinctrl_get_pin_name(dev, pin_selector),
sunxi_pinctrl_get_function_name(dev, func_selector),
desc->functions[func_selector].mux);
sunxi_gpio_set_cfgbank(plat->base + bank, pin,
desc->functions[func_selector].mux);
return 0;
}
sunxi: pinctrl: Implement pin configuration The sunxi pinctrl hardware has bias and drive control. Add driver support for configuring those options. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-29 02:10:47 +00:00
static const struct pinconf_param sunxi_pinctrl_pinconf_params[] = {
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 2 },
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 10 },
};
static int sunxi_pinctrl_pinconf_set_pull(struct sunxi_pinctrl_plat *plat,
uint bank, uint pin, uint bias)
{
struct sunxi_gpio *regs = &plat->base[bank];
sunxi_gpio_set_pull_bank(regs, pin, bias);
return 0;
}
static int sunxi_pinctrl_pinconf_set_drive(struct sunxi_pinctrl_plat *plat,
uint bank, uint pin, uint drive)
{
struct sunxi_gpio *regs = &plat->base[bank];
if (drive < 10 || drive > 40)
return -EINVAL;
/* Convert mA to the register value, rounding down. */
sunxi_gpio_set_drv_bank(regs, pin, drive / 10 - 1);
return 0;
}
static int sunxi_pinctrl_pinconf_set(struct udevice *dev, uint pin_selector,
uint param, uint val)
{
struct sunxi_pinctrl_plat *plat = dev_get_plat(dev);
int bank = pin_selector / SUNXI_GPIOS_PER_BANK;
int pin = pin_selector % SUNXI_GPIOS_PER_BANK;
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_UP:
return sunxi_pinctrl_pinconf_set_pull(plat, bank, pin, val);
case PIN_CONFIG_DRIVE_STRENGTH:
return sunxi_pinctrl_pinconf_set_drive(plat, bank, pin, val);
}
return -EINVAL;
}
sunxi: pinctrl: Implement get_pin_muxing function The pinmux command uses this function to display pinmux status. Since the driver cannot map pin numbers to a list of supported functions, only functions which are common across all pins can be reported by name. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 05:52:00 +00:00
static int sunxi_pinctrl_get_pin_muxing(struct udevice *dev, uint pin_selector,
char *buf, int size)
{
struct sunxi_pinctrl_plat *plat = dev_get_plat(dev);
int bank = pin_selector / SUNXI_GPIOS_PER_BANK;
int pin = pin_selector % SUNXI_GPIOS_PER_BANK;
int mux = sunxi_gpio_get_cfgbank(plat->base + bank, pin);
switch (mux) {
case SUNXI_GPIO_INPUT:
strlcpy(buf, "gpio input", size);
break;
case SUNXI_GPIO_OUTPUT:
strlcpy(buf, "gpio output", size);
break;
case SUNXI_GPIO_DISABLE:
strlcpy(buf, "disabled", size);
break;
default:
snprintf(buf, size, "function %d", mux);
break;
}
return 0;
}
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct pinctrl_ops sunxi_pinctrl_ops = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.get_pins_count = sunxi_pinctrl_get_pins_count,
.get_pin_name = sunxi_pinctrl_get_pin_name,
.get_functions_count = sunxi_pinctrl_get_functions_count,
.get_function_name = sunxi_pinctrl_get_function_name,
.pinmux_set = sunxi_pinctrl_pinmux_set,
sunxi: pinctrl: Implement pin configuration The sunxi pinctrl hardware has bias and drive control. Add driver support for configuring those options. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-29 02:10:47 +00:00
.pinconf_num_params = ARRAY_SIZE(sunxi_pinctrl_pinconf_params),
.pinconf_params = sunxi_pinctrl_pinconf_params,
.pinconf_set = sunxi_pinctrl_pinconf_set,
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.set_state = pinctrl_generic_set_state,
sunxi: pinctrl: Implement get_pin_muxing function The pinmux command uses this function to display pinmux status. Since the driver cannot map pin numbers to a list of supported functions, only functions which are common across all pins can be reported by name. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 05:52:00 +00:00
.get_pin_muxing = sunxi_pinctrl_get_pin_muxing,
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
};
static int sunxi_pinctrl_bind(struct udevice *dev)
{
struct sunxi_pinctrl_plat *plat = dev_get_plat(dev);
struct sunxi_pinctrl_desc *desc;
struct sunxi_gpio_plat *gpio_plat;
struct udevice *gpio_dev;
int i, ret;
desc = (void *)dev_get_driver_data(dev);
if (!desc)
return -EINVAL;
dev_set_priv(dev, desc);
plat->base = dev_read_addr_ptr(dev);
ret = device_bind_driver_to_node(dev, "gpio_sunxi", dev->name,
dev_ofnode(dev), &gpio_dev);
if (ret)
return ret;
for (i = 0; i < desc->num_banks; ++i) {
gpio_plat = malloc(sizeof(*gpio_plat));
if (!gpio_plat)
return -ENOMEM;
gpio_plat->regs = plat->base + i;
gpio_plat->bank_name[0] = 'P';
gpio_plat->bank_name[1] = 'A' + desc->first_bank + i;
gpio_plat->bank_name[2] = '\0';
ret = device_bind(gpio_dev, DM_DRIVER_REF(gpio_sunxi),
gpio_plat->bank_name, gpio_plat,
ofnode_null(), NULL);
if (ret)
return ret;
}
return 0;
}
static int sunxi_pinctrl_probe(struct udevice *dev)
{
struct clk *apb_clk;
apb_clk = devm_clk_get(dev, "apb");
if (!IS_ERR(apb_clk))
clk_enable(apb_clk);
return 0;
}
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function suniv_f1c100s_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 3 }, /* PE11-PE12 */
{ "i2c1", 3 }, /* PD5-PD6 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 3 }, /* PC0-PC2 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 2 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 5 }, /* PE0-PE1 */
#endif
suniv: add UART1 support Some boards with the Allwinner F1C100s family SoCs use UART1 for its debug UART, so define the pins for the SPL and the pinmux name and mux value for U-Boot proper. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-10-05 22:19:54 +00:00
{ "uart1", 5 }, /* PA0-PA3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused suniv_f1c100s_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = suniv_f1c100s_pinctrl_functions,
.num_functions = ARRAY_SIZE(suniv_f1c100s_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 6,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun4i_a10_pinctrl_functions[] = {
pinctrl: sunxi: Add sun4i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:21:36 +00:00
{ "emac", 2 }, /* PA0-PA17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PB0-PB1 */
{ "i2c1", 2 }, /* PB18-PB19 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
#if IS_ENABLED(CONFIG_MMC1_PINS_PH)
{ "mmc1", 5 }, /* PH22-PH27 */
#else
{ "mmc1", 4 }, /* PG0-PG5 */
#endif
{ "mmc2", 3 }, /* PC6-PC15 */
{ "mmc3", 2 }, /* PI4-PI9 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC2, PC23 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PB22-PB23 */
#endif
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun4i_a10_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun4i_a10_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun4i_a10_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 9,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun5i_a13_pinctrl_functions[] = {
pinctrl: sunxi: Add sun4i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:21:36 +00:00
{ "emac", 2 }, /* PA0-PA17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PB0-PB1 */
{ "i2c1", 2 }, /* PB15-PB16 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG3-PG8 */
{ "mmc2", 3 }, /* PC6-PC15 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PB19-PB20 */
#endif
{ "uart1", 4 }, /* PG3-PG4 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun5i_a13_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun5i_a13_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun5i_a13_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 7,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun6i_a31_pinctrl_functions[] = {
pinctrl: sunxi: Add sunxi GMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:13:52 +00:00
{ "gmac", 2 }, /* PA0-PA27 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PH14-PH15 */
{ "i2c1", 2 }, /* PH16-PH17 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC6-PC15, PC24 */
{ "mmc3", 4 }, /* PC6-PC15, PC24 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC2, PC27 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PH20-PH21 */
#endif
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun6i_a31_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun6i_a31_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun6i_a31_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 2 }, /* PL0-PL1 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun6i_a31_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun6i_a31_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun6i_a31_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 2,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun7i_a20_pinctrl_functions[] = {
pinctrl: sunxi: Add sun4i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:21:36 +00:00
{ "emac", 2 }, /* PA0-PA17 */
pinctrl: sunxi: Add sunxi GMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:13:52 +00:00
{ "gmac", 5 }, /* PA0-PA17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PB0-PB1 */
{ "i2c1", 2 }, /* PB18-PB19 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
#if IS_ENABLED(CONFIG_MMC1_PINS_PH)
{ "mmc1", 5 }, /* PH22-PH27 */
#else
{ "mmc1", 4 }, /* PG0-PG5 */
#endif
{ "mmc2", 3 }, /* PC5-PC15, PC24 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC2, PC23 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PB22-PB23 */
#endif
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun7i_a20_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun7i_a20_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun7i_a20_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 9,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_a23_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PH2-PH3 */
{ "i2c1", 2 }, /* PH4-PH5 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PB0-PB1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a23_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_a23_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_a23_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 3 }, /* PL0-PL1 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a23_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_a23_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_a23_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 1,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_a33_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PH2-PH3 */
{ "i2c1", 2 }, /* PH4-PH5 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 3 }, /* PB0-PB1 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PB0-PB1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a33_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_a33_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_a33_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_a83t_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "gmac", 4 }, /* PD2-PD23 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PH0-PH1 */
{ "i2c1", 2 }, /* PH2-PH3 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PB9-PB10 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PB0-PB1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a83t_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_a83t_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_a83t_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 2 }, /* PL8-PL9 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a83t_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_a83t_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_a83t_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 1,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_h3_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "emac", 2 }, /* PD0-PD17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PA11-PA12 */
{ "i2c1", 3 }, /* PA18-PA19 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC5-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PA4-PA5 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PA0-PA1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_h3_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_h3_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_h3_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 7,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_h3_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 2 }, /* PL0-PL1 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_h3_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_h3_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_h3_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 1,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun8i_v3s_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "emac", 4 }, /* PD0-PD17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PB6-PB7 */
{ "i2c1", 2 }, /* PB8-PB9 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 2 }, /* PC0-PC10 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 3 }, /* PB8-PB9 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PB0-PB1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun8i_v3s_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun8i_v3s_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun8i_v3s_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 7,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun9i_a80_pinctrl_functions[] = {
pinctrl: sunxi: Add sunxi GMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:13:52 +00:00
{ "gmac", 2 }, /* PA0-PA17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PH0-PH1 */
{ "i2c1", 2 }, /* PH2-PH3 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC6-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC2, PC19 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PH12-PH13 */
#endif
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun9i_a80_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun9i_a80_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun9i_a80_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c0", 2 }, /* PN0-PN1 */
{ "s_i2c1", 3 }, /* PM8-PM9 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 3 }, /* PL0-PL1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun9i_a80_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun9i_a80_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun9i_a80_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 3,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_a64_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "emac", 4 }, /* PD8-PD23 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PH0-PH1 */
{ "i2c1", 2 }, /* PH2-PH3 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC1-PC16 */
pinctrl: sunxi: Add the A64 PWM pinmux This is the only possible mux setting for the A64's PWM peripheral. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:52:52 +00:00
{ "pwm", 2 }, /* PD22 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 4 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 4 }, /* PB8-PB9 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PB0-PB1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_a64_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_a64_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_a64_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 2 }, /* PL8-PL9 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_a64_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_a64_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_a64_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 1,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_h5_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "emac", 2 }, /* PD0-PD17 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PA11-PA12 */
{ "i2c1", 3 }, /* PA18-PA19 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC1-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 3 }, /* PC0-PC3 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PA4-PA5 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
{ "uart2", 2 }, /* PA0-PA1 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h5_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_h5_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_h5_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 7,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_h6_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "emac", 5 }, /* PD0-PD20 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "i2c0", 2 }, /* PD25-PD26 */
{ "i2c1", 4 }, /* PH5-PH6 */
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC1-PC14 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 4 }, /* PC0-PC7 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PH0-PH1 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h6_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_h6_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_h6_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 8,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 3 }, /* PL0-PL1 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h6_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_h6_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_h6_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 2,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_h616_pinctrl_functions[] = {
pinctrl: sunxi: Add sun8i EMAC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:34:29 +00:00
{ "emac0", 2 }, /* PI0-PI16 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add MMC pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 21:51:03 +00:00
{ "mmc0", 2 }, /* PF0-PF5 */
{ "mmc1", 2 }, /* PG0-PG5 */
{ "mmc2", 3 }, /* PC0-PC16 */
pinctrl: sunxi: Add SPI0 pinmuxes Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 22:05:35 +00:00
{ "spi0", 4 }, /* PC0-PC7, PC15-PC16 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
{ "uart0", 2 }, /* PH0-PH1 */
#endif
{ "uart1", 2 }, /* PG6-PG7 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_h616_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_h616_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_A,
.num_banks = 9,
};
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
pinctrl: sunxi: Add I2C pinmuxes Where multiple options were available, the one matching board.c and the device trees was chosen. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: fixup H5 I2C1 pinmux] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 20:17:32 +00:00
{ "s_i2c", 3 }, /* PL0-PL1 */
pinctrl: sunxi: Add UART pinmuxes This includes UART0 and R_UART (s_uart) on all supported platforms, plus the additional UART configurations from arch/arm/mach-sunxi/board.c. Pin lists and mux values were taken from the Linux drivers. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-28 18:00:45 +00:00
{ "s_uart", 2 }, /* PL2-PL3 */
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
};
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_r_pinctrl_desc = {
sunxi: pinctrl: Implement pin muxing functions Implement the operations to get pin and function names, and to set the mux for a pin. The pin count and pin names are calculated as if each bank has the maximum number of pins. Function names are simply the index into a list of { function name, mux value } pairs. We assume all pins associated with a function use the same mux value for that function. This is generally true within a group of pins on a single port, but generally false when some peripheral can be muxed to multiple ports. For example, A64 UART3 uses mux 3 on port D, and mux 2 on port H. But all of the port D pins use the same mux value, and so do all of the port H pins. This applies even when the pins for some function are not contiguous, and when the lower-numbered mux values are unused. A good example of both of these cases is SPI0 on most SoCs. This strategy saves a lot of space (which is especially important for SPL), but where the mux value for a certain function differs across ports, it forces us to choose a single port for that function at build time. Since almost all boards use the default (i.e. reference design) pin muxes[1], this is unlikely to be a problem. [1]: See commit dda9fa734f81 ("sunxi: Simplify MMC pinmux selection") Signed-off-by: Samuel Holland <samuel@sholland.org> [Andre: add comment summarising the commit message] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-17 04:56:47 +00:00
.functions = sun50i_h616_r_pinctrl_functions,
.num_functions = ARRAY_SIZE(sun50i_h616_r_pinctrl_functions),
sunxi: pinctrl: Create the driver skeleton Create a do-nothing driver for each sunxi pin controller variant. Since only one driver can automatically bind to a DT node, since the GPIO driver already requires a manual binding process, and since the pinctrl driver needs access to some of the same information, refactor the GPIO driver to be bound by the pinctrl driver. This commit should cause no functional change. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-13 01:09:43 +00:00
.first_bank = SUNXI_GPIO_L,
.num_banks = 1,
};
static const struct udevice_id sunxi_pinctrl_ids[] = {
#ifdef CONFIG_PINCTRL_SUNIV_F1C100S
{
.compatible = "allwinner,suniv-f1c100s-pinctrl",
.data = (ulong)&suniv_f1c100s_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN4I_A10
{
.compatible = "allwinner,sun4i-a10-pinctrl",
.data = (ulong)&sun4i_a10_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN5I_A13
{
.compatible = "allwinner,sun5i-a10s-pinctrl",
.data = (ulong)&sun5i_a13_pinctrl_desc,
},
{
.compatible = "allwinner,sun5i-a13-pinctrl",
.data = (ulong)&sun5i_a13_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN6I_A31
{
.compatible = "allwinner,sun6i-a31-pinctrl",
.data = (ulong)&sun6i_a31_pinctrl_desc,
},
{
.compatible = "allwinner,sun6i-a31s-pinctrl",
.data = (ulong)&sun6i_a31_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN6I_A31_R
{
.compatible = "allwinner,sun6i-a31-r-pinctrl",
.data = (ulong)&sun6i_a31_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN7I_A20
{
.compatible = "allwinner,sun7i-a20-pinctrl",
.data = (ulong)&sun7i_a20_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_A23
{
.compatible = "allwinner,sun8i-a23-pinctrl",
.data = (ulong)&sun8i_a23_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_A23_R
{
.compatible = "allwinner,sun8i-a23-r-pinctrl",
.data = (ulong)&sun8i_a23_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_A33
{
.compatible = "allwinner,sun8i-a33-pinctrl",
.data = (ulong)&sun8i_a33_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_A83T
{
.compatible = "allwinner,sun8i-a83t-pinctrl",
.data = (ulong)&sun8i_a83t_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_A83T_R
{
.compatible = "allwinner,sun8i-a83t-r-pinctrl",
.data = (ulong)&sun8i_a83t_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_H3
{
.compatible = "allwinner,sun8i-h3-pinctrl",
.data = (ulong)&sun8i_h3_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_H3_R
{
.compatible = "allwinner,sun8i-h3-r-pinctrl",
.data = (ulong)&sun8i_h3_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN7I_A20
{
.compatible = "allwinner,sun8i-r40-pinctrl",
.data = (ulong)&sun7i_a20_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN8I_V3S
{
.compatible = "allwinner,sun8i-v3-pinctrl",
.data = (ulong)&sun8i_v3s_pinctrl_desc,
},
{
.compatible = "allwinner,sun8i-v3s-pinctrl",
.data = (ulong)&sun8i_v3s_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN9I_A80
{
.compatible = "allwinner,sun9i-a80-pinctrl",
.data = (ulong)&sun9i_a80_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN9I_A80_R
{
.compatible = "allwinner,sun9i-a80-r-pinctrl",
.data = (ulong)&sun9i_a80_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_A64
{
.compatible = "allwinner,sun50i-a64-pinctrl",
.data = (ulong)&sun50i_a64_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_A64_R
{
.compatible = "allwinner,sun50i-a64-r-pinctrl",
.data = (ulong)&sun50i_a64_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_H5
{
.compatible = "allwinner,sun50i-h5-pinctrl",
.data = (ulong)&sun50i_h5_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_H6
{
.compatible = "allwinner,sun50i-h6-pinctrl",
.data = (ulong)&sun50i_h6_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_H6_R
{
.compatible = "allwinner,sun50i-h6-r-pinctrl",
.data = (ulong)&sun50i_h6_r_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_H616
{
.compatible = "allwinner,sun50i-h616-pinctrl",
.data = (ulong)&sun50i_h616_pinctrl_desc,
},
#endif
#ifdef CONFIG_PINCTRL_SUN50I_H616_R
{
.compatible = "allwinner,sun50i-h616-r-pinctrl",
.data = (ulong)&sun50i_h616_r_pinctrl_desc,
},
#endif
{}
};
U_BOOT_DRIVER(sunxi_pinctrl) = {
.name = "sunxi-pinctrl",
.id = UCLASS_PINCTRL,
.of_match = sunxi_pinctrl_ids,
.bind = sunxi_pinctrl_bind,
.probe = sunxi_pinctrl_probe,
.plat_auto = sizeof(struct sunxi_pinctrl_plat),
.ops = &sunxi_pinctrl_ops,
};
Reference in a new issue Copy permalink