u-boot/board/sysam/amcore/amcore.c

102 lines
2.1 KiB
C
Raw Normal View History

/*
* Board functions for Sysam AMCORE (MCF5307 based) board
*
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
*
* SPDX-License-Identifier: GPL-2.0+
*
* This file copies memory testdram() from sandburst/common/sb_common.c
*/
#include <common.h>
#include <asm/immap.h>
#include <asm/io.h>
void init_lcd(void)
{
/* setup for possible K0108 lcd connected on the parallel port */
sim_t *sim = (sim_t *)(MMAP_SIM);
out_be16(&sim->par, 0x300);
gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
out_be16(&gpio->paddr, 0xfcff);
out_be16(&gpio->padat, 0x0c00);
}
int checkboard(void)
{
puts("Board: ");
puts("AMCORE v.001(alpha)\n");
init_lcd();
return 0;
}
/*
* in initdram we are here executing from flash
* case 1:
* is with no ACR/flash cache enabled
* nop = 40ns (scope measured)
*/
void fudelay(int usec)
{
while (usec--)
asm volatile ("nop");
}
phys_size_t initdram(int board_type)
{
u32 dramsize, RC;
sdramctrl_t *dc = (sdramctrl_t *)(MMAP_DRAMC);
/*
* SDRAM MT48LC4M32B2 details
* Memory block 0: 16 MB of SDRAM at address $00000000
* Port size: 32-bit port
*
* Memory block 0 wired as follows:
* CPU : A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20 A21 A22 A23
* SDRAM : A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 BA0 BA1
*
* Ensure that there is a delay of at least 100 microseconds from
* processor reset to the following code so that the SDRAM is ready
* for commands.
*/
fudelay(100);
/*
* DCR
* set proper RC as per specification
*/
RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1;
RC = (RC * 15) >> 4;
/* 0x8000 is the faster option */
out_be16(&dc->dcr, 0x8200 | RC);
/*
* DACR0, page mode continuous, CMD on A20 0x0300
*/
out_be32(&dc->dacr0, 0x00003304);
dramsize = ((CONFIG_SYS_SDRAM_SIZE)-1) & 0xfffc0000;
out_be32(&dc->dmr0, dramsize|1);
/* issue a PRECHARGE ALL */
out_be32(&dc->dacr0, 0x0000330c);
out_be32((u32 *)0x00000004, 0xbeaddeed);
/* issue AUTOREFRESH */
out_be32(&dc->dacr0, 0x0000b304);
/* let refresh occour */
fudelay(1);
out_be32(&dc->dacr0, 0x0000b344);
out_be32((u32 *)0x00000c00, 0xbeaddeed);
return get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE);
}