Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 18:10:13 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/uniphier_v7_defconfig

51 lines
1.2 KiB
Text
Raw Normal View History

ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-13 17:48:42 +00:00
CONFIG_SYS_TEXT_BASE=0x84000000
Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL" This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892. I took a closer look at this after the commit was applied, and found CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much. 8KB memory for SPL is actually too big for some boards. Perhaps 0x800 is enough, but the situation varies board by board. Let's postpone our decision until we come up with a better idea. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-19 12:40:26 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x2000
ARM: uniphier: move CONFIG_SPL_* to defconfig or select As I repeated in the ML, I am unhappy with config entries with bare defaults. Kick them out of arch/arm/mach-uniphier/Kconfig. Currently, CONFIG_SPL_SERIAL_SUPPORT is not user-configurable (build fails without it), but it should be fixed later anyway, so I am moving CONFIG_SPL_SERIAL_SUPPORT to defconfigs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-20 05:27:00 +00:00
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-13 17:48:42 +00:00
CONFIG_SPL_NAND_SUPPORT=y
ARM: uniphier: merge two defconfig files into uniphier_v7_defconfig The main difference between Pro4 and PXs2/LD6b is the Denali NAND IP version. This is now distinguished by DT. Merge the two defconfig files into uniphier_v7_defconfig. Update the README.uniphier too. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-15 12:43:20 +00:00
CONFIG_ARCH_UNIPHIER_V7_MULTI=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_MICRO_SUPPORT_CARD=y
ARM: dts: uniphier: sync DT with latest Linux Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-07 07:43:00 +00:00
CONFIG_DEFAULT_DEVICE_TREE="uniphier-pxs2-vodka"
ARM: uniphier: disable CONFIG_ARCH_FIXUP_FDT_MEMORY Do not overwrite the memory nodes in the kernel DT where some parts of the memory region might be carved out. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-12-05 09:31:38 +00:00
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
ARM: uniphier: make SPL optional for ARVv8 SoCs We may want to run different firmware before running U-Boot. For example, ARM Trusted Firmware runs before U-Boot, making U-Boot a non-secure world boot loader. In this case, the SoC might be initialized there, which enables us to skip SPL entirely. This commit removes "select SPL" to make it configurable. This also enables the Multi SoC support for the UniPhier ARMv8 SoCs. (CONFIG_ARCH_UNIPHIER_V8_MULTI) Thanks to the driver model and Device Tree, the U-Boot proper part is now written in a generic way. The board/SoC parameters reside in DT. The Multi SoC support increases the memory footprint a bit, but the U-Boot proper does not have strict memory constraint. This will mitigate the per-SoC (sometimes per-board) defconfig burden. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-21 09:05:22 +00:00
CONFIG_SPL=y
Convert CONFIG_SPL_NOR_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:51 +00:00
CONFIG_SPL_NOR_SUPPORT=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_HUSH_PARSER=y
ARM: uniphier: enable CONFIG_CMD_CONFIG This command is useful to see which config options are enabled on the running U-Boot image. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-21 06:09:11 +00:00
CONFIG_CMD_CONFIG=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_BOOTZ=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_ENV_EXISTS is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
ARM: uniphier: enable CONFIG_CMD_GPT Enable CONFIG_CMD_GPT, keeping CONFIG_SPL_EFI_PARTITION because the SPL for UniPhier platform does not recognize any partitions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-17 07:17:55 +00:00
CONFIG_CMD_GPT=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_CMD_I2C=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_MMC=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
ARM: uniphier: enable CONFIG_CMD_CACHE This will be useful, for example, to load firmware to DRAM and make it visible to other agents. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-28 03:44:41 +00:00
CONFIG_CMD_CACHE=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_FAT=y
ARM: uniphier: enable CONFIG_CMD_FS_GENERIC Enable file system commands such as load, ls. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-13 11:32:18 +00:00
CONFIG_CMD_FS_GENERIC=y
ARM: uniphier: disable CONFIG_SPL_DOS_PARTITION The SPL for UniPhier platform does not recognize any partitions. Do not compile unneeded features. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-17 07:17:39 +00:00
# CONFIG_SPL_DOS_PARTITION is not set
ARM: uniphier: enable CONFIG_CMD_GPT Enable CONFIG_CMD_GPT, keeping CONFIG_SPL_EFI_PARTITION because the SPL for UniPhier platform does not recognize any partitions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-17 07:17:55 +00:00
# CONFIG_SPL_EFI_PARTITION is not set
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
ARM: uniphier: enable GPIO command and driver for UniPhier SoCs This allows to use the "gpio" command. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-16 08:03:50 +00:00
CONFIG_GPIO_UNIPHIER=y
ARM: uniphier: move CONFIG_I2C_EEPROM to defconfig We already have the entry for this option in Kconfig, so let's migrate to it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-26 18:47:58 +00:00
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set Add the following options to drivers/misc/Kconfig: SYS_I2C_EEPROM_ADDR SYS_I2C_EEPROM_BUS SYS_EEPROM_SIZE SYS_EEPROM_PAGE_WRITE_BITS SYS_EEPROM_PAGE_WRITE_DELAY_MS SYS_I2C_EEPROM_ADDR_LEN SYS_I2C_EEPROM_ADDR_OVERFLOW This does not migrate any boards, but provides a foundations for those who want/need these options Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate uniphier] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-13 14:00:28 +00:00
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
ARM: uniphier: enable UniPhier SD/MMC host driver Enable the driver in all UniPhier defconfig files and add some needed defines to the common files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-18 10:52:49 +00:00
CONFIG_MMC_UNIPHIER=y
ARM: uniphier: move CONFIG_NAND to defconfig This imply was added when the option was moved by the moveconfig tool, but the intention is not clear. Move it to defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-29 06:41:32 +00:00
CONFIG_NAND=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_NAND_DENALI=y
ARM: uniphier: enable CONFIG_NAND_DENALI_DT Migrate to the DT-based NAND init entry. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-26 08:58:02 +00:00
CONFIG_NAND_DENALI_DT=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
ARM: uniphier: merge two defconfig files into uniphier_v7_defconfig The main difference between Pro4 and PXs2/LD6b is the Denali NAND IP version. This is now distinguished by DT. Merge the two defconfig files into uniphier_v7_defconfig. Update the README.uniphier too. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-15 12:43:20 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
CONFIG_USB_STORAGE=y
Reference in a new issue Copy permalink