u-boot/arch/arm/include/asm/omap_i2c.h

/* SPDX-License-Identifier: GPL-2.0 */

#ifndef _OMAP_I2C_H
#define _OMAP_I2C_H

#if CONFIG_IS_ENABLED(DM_I2C)

/* Information about a GPIO bank */
struct omap_i2c_plat {
	ulong base;	/* address of registers in physical memory */
	int speed;
	int ip_rev;
};

#endif

enum {
	OMAP_I2C_REV_V1 = 0,
	OMAP_I2C_REV_V2 = 1,
};

#endif /* _OMAP_I2C_H */
i2c: omap24xx_i2c: Use platdata to probe the device This allows the driver to be used without OF_CONTROL. AM335x support DM_SPL but does not use SPL_OF_CONTROL. Enabling DM_I2C in SPL thus requires that the omap I2C can be passed platdata. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> 2018-12-07 13:50:42 +00:00			`/* SPDX-License-Identifier: GPL-2.0 */`

			`#ifndef _OMAP_I2C_H`
			`#define _OMAP_I2C_H`

dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 2021-02-09 11:52:45 +00:00			`#if CONFIG_IS_ENABLED(DM_I2C)`
i2c: omap24xx_i2c: Use platdata to probe the device This allows the driver to be used without OF_CONTROL. AM335x support DM_SPL but does not use SPL_OF_CONTROL. Enabling DM_I2C in SPL thus requires that the omap I2C can be passed platdata. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> 2018-12-07 13:50:42 +00:00
			`/* Information about a GPIO bank */`
dm: treewide: Rename ..._platdata variables to just ..._plat Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org> 2020-12-03 23:55:23 +00:00			`struct omap_i2c_plat {`
i2c: omap24xx_i2c: Use platdata to probe the device This allows the driver to be used without OF_CONTROL. AM335x support DM_SPL but does not use SPL_OF_CONTROL. Enabling DM_I2C in SPL thus requires that the omap I2C can be passed platdata. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> 2018-12-07 13:50:42 +00:00			`ulong base; /* address of registers in physical memory */`
			`int speed;`
			`int ip_rev;`
			`};`

			`#endif`

			`enum {`
			`OMAP_I2C_REV_V1 = 0,`
			`OMAP_I2C_REV_V2 = 1,`
			`};`

			`#endif /* _OMAP_I2C_H */`