Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-08 22:24:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx8mm-venice-gw7901.dts

1056 lines
22 KiB
Text
Raw Normal View History

board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2020 Gateworks Corporation
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include "imx8mm.dtsi"
/ {
model = "Gateworks Venice GW7901 i.MX8MM board";
compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
aliases {
ethernet0 = &fec1;
ethernet1 = &lan1;
ethernet2 = &lan2;
ethernet3 = &lan3;
ethernet4 = &lan4;
usb0 = &usbotg1;
usb1 = &usbotg2;
};
chosen {
stdout-path = &uart2;
};
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
gpio-keys {
compatible = "gpio-keys";
user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <0>;
};
key-erased {
label = "key_erased";
linux,code = <BTN_2>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
interrupts = <7>;
};
};
led-controller {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
label = "led01_red";
gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "led01_grn";
gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-2 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
label = "led02_red";
gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-3 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "led02_grn";
gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-4 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
label = "led03_red";
gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-5 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "led03_grn";
gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-6 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
label = "led04_red";
gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-7 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "led04_grn";
gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-8 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
label = "led05_red";
gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-9 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "led05_grn";
gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-a {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
label = "led06_red";
gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led-b {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "led06_grn";
gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
regulator-ioexp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_ioexp>;
compatible = "regulator-fixed";
regulator-name = "ioexp";
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
regulator-isouart {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_isouart>;
compatible = "regulator-fixed";
regulator-name = "iso_uart";
gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
startup-delay-us = <100>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb2_vbus: regulator-usb2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2>;
compatible = "regulator-fixed";
regulator-name = "usb_usb2_vbus";
gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_wifi: regulator-wifi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_wl>;
compatible = "regulator-fixed";
regulator-name = "wifi";
gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
opp-25M {
opp-hz = /bits/ 64 <25000000>;
};
opp-100M {
opp-hz = /bits/ 64 <100000000>;
};
opp-750M {
opp-hz = /bits/ 64 <750000000>;
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
status = "okay";
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
pinctrl-0 = <&pinctrl_gsc>;
interrupt-parent = <&gpio4>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
#address-cells = <1>;
#size-cells = <0>;
channel@6 {
gw,mode = <0>;
reg = <0x06>;
label = "temp";
};
channel@8 {
gw,mode = <1>;
reg = <0x08>;
label = "vdd_bat";
};
channel@82 {
gw,mode = <2>;
reg = <0x82>;
label = "vin_aux1";
gw,voltage-divider-ohms = <22100 1000>;
};
channel@84 {
gw,mode = <2>;
reg = <0x84>;
label = "vin_aux2";
gw,voltage-divider-ohms = <22100 1000>;
};
channel@86 {
gw,mode = <2>;
reg = <0x86>;
label = "vdd_vin";
gw,voltage-divider-ohms = <22100 1000>;
};
channel@88 {
gw,mode = <2>;
reg = <0x88>;
label = "vdd_3p3";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@8c {
gw,mode = <2>;
reg = <0x8c>;
label = "vdd_2p5";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@8e {
gw,mode = <2>;
reg = <0x8e>;
label = "vdd_0p95";
};
channel@90 {
gw,mode = <2>;
reg = <0x90>;
label = "vdd_soc";
};
channel@92 {
gw,mode = <2>;
reg = <0x92>;
label = "vdd_arm";
};
channel@98 {
gw,mode = <2>;
reg = <0x98>;
label = "vdd_1p8";
};
channel@9a {
gw,mode = <2>;
reg = <0x9a>;
label = "vdd_1p2";
};
channel@9c {
gw,mode = <2>;
reg = <0x9c>;
label = "vdd_dram";
};
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
label = "vdd_gsc";
gw,voltage-divider-ohms = <10000 10000>;
};
};
};
gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gsc>;
interrupts = <4>;
};
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio3>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
/* vdd_soc: 0.805-0.900V (typ=0.8V) */
BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
/* vdd_arm: 0.805-1.0V (typ=0.9V) */
BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
};
/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_3p3 */
BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_1p8 */
BUCK5 {
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_dram */
BUCK6 {
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
/* nvcc_snvs_1p8 */
LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1900000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_snvs_0p8 */
LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
/* vdda_1p8 */
LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
leds_gpio: gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
switch: switch@5f {
compatible = "microchip,ksz9897";
reg = <0x5f>;
pinctrl-0 = <&pinctrl_ksz>;
interrupt-parent = <&gpio4>;
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
ports {
#address-cells = <1>;
#size-cells = <0>;
lan1: port@0 {
reg = <0>;
label = "lan1";
local-mac-address = [00 00 00 00 00 00];
arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration Fix the dsa switch config: - remove the unnecessary phy-mode from the switch itself - added the necessary fixed-link node to the non-cpu ports required for U-Boot DSA Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:09 +00:00
phy-handle = <&sw_phy0>;
phy-mode = "internal";
board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
};
lan2: port@1 {
reg = <1>;
label = "lan2";
local-mac-address = [00 00 00 00 00 00];
arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration Fix the dsa switch config: - remove the unnecessary phy-mode from the switch itself - added the necessary fixed-link node to the non-cpu ports required for U-Boot DSA Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:09 +00:00
phy-handle = <&sw_phy1>;
phy-mode = "internal";
board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
};
lan3: port@2 {
reg = <2>;
label = "lan3";
local-mac-address = [00 00 00 00 00 00];
arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration Fix the dsa switch config: - remove the unnecessary phy-mode from the switch itself - added the necessary fixed-link node to the non-cpu ports required for U-Boot DSA Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:09 +00:00
phy-handle = <&sw_phy2>;
phy-mode = "internal";
board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
};
lan4: port@3 {
reg = <3>;
label = "lan4";
local-mac-address = [00 00 00 00 00 00];
arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration Fix the dsa switch config: - remove the unnecessary phy-mode from the switch itself - added the necessary fixed-link node to the non-cpu ports required for U-Boot DSA Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:09 +00:00
phy-handle = <&sw_phy3>;
phy-mode = "internal";
board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
};
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&fec1>;
phy-mode = "rgmii-id";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration Fix the dsa switch config: - remove the unnecessary phy-mode from the switch itself - added the necessary fixed-link node to the non-cpu ports required for U-Boot DSA Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:09 +00:00
mdios {
#address-cells = <1>;
#size-cells = <0>;
mdio@0 {
reg = <0>;
compatible = "microchip,ksz-mdio";
#address-cells = <1>;
#size-cells = <0>;
sw_phy0: ethernet-phy@0 {
reg = <0x0>;
};
sw_phy1: ethernet-phy@1 {
reg = <0x1>;
};
sw_phy2: ethernet-phy@2 {
reg = <0x2>;
};
sw_phy3: ethernet-phy@3 {
reg = <0x3>;
};
};
};
board: gateworks: venice: add imx8mm-gw7901 support The Gateworks GW7901 is an ARM based single board computer (SBC) featuring: - i.MX8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - SPI FRAM - Gateworks System Controller (GSC) - Atmel ATECC Crypto Authentication - USB 2.0 - Microchip GbE Switch - Multiple multi-protocol RS232/RS485/RS422 Serial ports - onboard 802.11ac WiFi / BT - microSD socket - miniPCIe socket with PCIe, USB 2.0 and dual SIM sockets - Wide range DC power input - 802.3at PoE To add support for this board: - add dts from Linux (accepted for v5.14) - add SPL PMIC config Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-30 23:50:02 +00:00
};
crypto@60 {
compatible = "atmel,atecc508a";
reg = <0x60>;
};
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usbotg1 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
/* SDIO WiFi */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi>;
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */
MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */
MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */
MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */
MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */
>;
};
pinctrl_gsc: gscgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
>;
};
pinctrl_ksz: kszgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41
MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41
>;
};
pinctrl_reg_isouart: regisouartgrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041
>;
};
pinctrl_reg_ioexp: regioexpgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041
>;
};
pinctrl_reg_wl: regwlgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041
>;
};
pinctrl_reg_usb2: regusb1grp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x41
MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140
MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x140
>;
};
pinctrl_spi1: spi1grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140
MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140
MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140
MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140
MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140
>;
};
pinctrl_uart1_gpio: uart1gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */
MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140
MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140
>;
};
pinctrl_uart3_gpio: uart3gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */
MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */
MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140
MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140
>;
};
pinctrl_uart4_gpio: uart4gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
};
&cpu_alert0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
&cpu_crit0 {
temperature = <105000>;
hysteresis = <2000>;
type = "critical";
};
Reference in a new issue Copy permalink