u-boot/board/Arcturus/ucp1020/ucp1020.c

373 lines
8.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2013-2019 Arcturus Networks, Inc.
* https://www.arcturusnetworks.com/products/ucp1020/
* by Oleksandr G Zhadan et al.
* based on board/freescale/p1_p2_rdb_pc/spl.c
* original copyright follows:
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <command.h>
#include <env.h>
#include <hwconfig.h>
#include <image.h>
#include <init.h>
#include <net.h>
#include <pci.h>
#include <i2c.h>
#include <miiphy.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <ioports.h>
#include <netdev.h>
#include <micrel.h>
#include <spi_flash.h>
#include <mmc.h>
#include <linux/ctype.h>
#include <asm/fsl_serdes.h>
#include <asm/gpio.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <asm/fsl_law.h>
#include <asm/fsl_lbc.h>
#include <asm/mp.h>
#include "ucp1020.h"
void spi_set_speed(struct spi_slave *slave, uint hz)
{
/* TO DO: It's actially have to be in spi/ */
}
/*
* To be compatible with cmd_gpio
*/
int name_to_gpio(const char *name)
{
int gpio = 31 - simple_strtoul(name, NULL, 10);
if (gpio < 16)
gpio = -1;
return gpio;
}
void board_gpio_init(void)
{
int i;
char envname[8], *val;
for (i = 0; i < GPIO_MAX_NUM; i++) {
sprintf(envname, "GPIO%d", i);
val = env_get(envname);
if (val) {
char direction = toupper(val[0]);
char level = toupper(val[1]);
if (direction == 'I') {
gpio_direction_input(i);
} else {
if (direction == 'O') {
if (level == '1')
gpio_direction_output(i, 1);
else
gpio_direction_output(i, 0);
}
}
}
}
val = env_get("PCIE_OFF");
if (val) {
gpio_direction_input(GPIO_PCIE1_EN);
gpio_direction_input(GPIO_PCIE2_EN);
} else {
gpio_direction_output(GPIO_PCIE1_EN, 1);
gpio_direction_output(GPIO_PCIE2_EN, 1);
}
val = env_get("SDHC_CDWP_OFF");
if (!val) {
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
setbits_be32(&gur->pmuxcr,
(MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
}
}
int board_early_init_f(void)
{
return 0; /* Just in case. Could be disable in config file */
}
int checkboard(void)
{
printf("Board: %s\n", CONFIG_BOARDNAME_LOCAL);
board_gpio_init();
#ifdef CONFIG_MMC
printf("SD/MMC: 4-bit Mode\n");
#endif
return 0;
}
#ifdef CONFIG_PCI
void pci_init_board(void)
{
fsl_pcie_init_board(0);
}
#endif
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* invalidate existing TLB entry for flash */
disable_tlb(flash_esel);
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, /* perms, wimge */
0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
return 0;
}
int board_phy_config(struct phy_device *phydev)
{
#if defined(CONFIG_PHY_MICREL_KSZ9021)
int regval;
static int cnt;
if (cnt++ == 0)
printf("PHYs address [");
if (phydev->addr == TSEC1_PHY_ADDR || phydev->addr == TSEC3_PHY_ADDR) {
regval =
ksz9021_phy_extended_read(phydev,
MII_KSZ9021_EXT_STRAP_STATUS);
/*
* min rx data delay
*/
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
0x6666);
/*
* max rx/tx clock delay, min rx/tx control
*/
ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
0xf6f6);
printf("0x%x", (regval & 0x1f));
} else {
printf("0x%x", (TSEC2_PHY_ADDR & 0x1f));
}
if (cnt == 3)
printf("] ");
else
printf(",");
#endif
#if defined(CONFIG_PHY_MICREL_KSZ9031_DEBUG)
regval = ksz9031_phy_extended_read(phydev, 2, 0x01, 0x4000);
if (regval >= 0)
printf(" (ADDR 0x%x) ", regval & 0x1f);
#endif
return 0;
}
int last_stage_init(void)
{
static char newkernelargs[256];
static u8 id1[16];
static u8 id2;
#ifdef CONFIG_MMC
struct mmc *mmc;
#endif
char *sval, *kval;
if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) {
printf("Error reading i2c IDT6V49205B information!\n");
} else {
printf("IDT6V49205B(0x%02x): ready\n", id1[1]);
i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
if (!(id1[1] & 0x02)) {
id1[1] |= 0x02;
i2c_write(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
asm("nop; nop");
}
}
if (i2c_read(CONFIG_SYS_I2C_NCT72_ADDR, 0xFE, 1, &id2, 1) < 0)
printf("Error reading i2c NCT72 information!\n");
else
printf("NCT72(0x%x): ready\n", id2);
kval = env_get("kernelargs");
#ifdef CONFIG_MMC
mmc = find_mmc_device(0);
if (mmc)
if (!mmc_init(mmc)) {
printf("MMC/SD card detected\n");
if (kval) {
int n = strlen(defkargs);
char *tmp = strstr(kval, defkargs);
*tmp = 0;
strcpy(newkernelargs, kval);
strcat(newkernelargs, " ");
strcat(newkernelargs, mmckargs);
strcat(newkernelargs, " ");
strcat(newkernelargs, &tmp[n]);
env_set("kernelargs", newkernelargs);
} else {
env_set("kernelargs", mmckargs);
}
}
#endif
get_arc_info();
if (kval) {
sval = env_get("SERIAL");
if (sval) {
strcpy(newkernelargs, "SN=");
strcat(newkernelargs, sval);
strcat(newkernelargs, " ");
strcat(newkernelargs, kval);
env_set("kernelargs", newkernelargs);
}
} else {
printf("Error reading kernelargs env variable!\n");
}
return 0;
}
int board_eth_init(bd_t *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
#ifdef CONFIG_TSEC2
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
if (is_serdes_configured(SGMII_TSEC2)) {
if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_SGMII2_DIS)) {
puts("eTSEC2 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
}
}
num++;
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
num++;
#endif
if (!num) {
printf("No TSECs initialized\n");
return 0;
}
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
const char *soc_usb_compat = "fsl-usb2-dr";
int err, usb1_off, usb2_off;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
FT_FSL_PCI_SETUP;
#if defined(CONFIG_HAS_FSL_DR_USB)
fsl_fdt_fixup_dr_usb(blob, bd);
#endif
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
/* Delete eLBC node as it is muxed with USB2 controller */
if (hwconfig("usb2")) {
const char *soc_elbc_compat = "fsl,p1020-elbc";
int off = fdt_node_offset_by_compatible(blob, -1,
soc_elbc_compat);
if (off < 0) {
printf
("WARNING: could not find compatible node %s: %s\n",
soc_elbc_compat, fdt_strerror(off));
return off;
}
err = fdt_del_node(blob, off);
if (err < 0) {
printf("WARNING: could not remove %s: %s\n",
soc_elbc_compat, fdt_strerror(err));
}
return err;
}
#endif
/* Delete USB2 node as it is muxed with eLBC */
usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat);
if (usb1_off < 0) {
printf("WARNING: could not find compatible node %s: %s.\n",
soc_usb_compat, fdt_strerror(usb1_off));
return usb1_off;
}
usb2_off =
fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat);
if (usb2_off < 0) {
printf("WARNING: could not find compatible node %s: %s.\n",
soc_usb_compat, fdt_strerror(usb2_off));
return usb2_off;
}
err = fdt_del_node(blob, usb2_off);
if (err < 0) {
printf("WARNING: could not remove %s: %s.\n",
soc_usb_compat, fdt_strerror(err));
}
return 0;
}
#endif