u-boot/include/configs/sun8i.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>
 *
 * Configuration settings for the Allwinner A23 (sun8i) CPU
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * A23 specific configuration
 */

#ifdef SUNXI_SRAM_A2_SIZE
/*
 * If the SoC has enough SRAM A2, use that for the secure monitor.
 * Skip the first 16 KiB of SRAM A2, which is not usable, as only certain bytes
 * are writable. Reserve the last 17 KiB for the resume shim and SCP firmware.
 */
#define CONFIG_ARMV7_SECURE_BASE	(SUNXI_SRAM_A2_BASE + 16 * 1024)
#define CONFIG_ARMV7_SECURE_MAX_SIZE	(SUNXI_SRAM_A2_SIZE - 33 * 1024)
#endif

/*
 * Include common sunxi configuration where most the settings are
 */
#include <configs/sunxi-common.h>

#endif /* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: sunxi: Add basic A23 support The basic blocks of the A23 are similar to the A31 (sun6i). Re-use sun6i code for initial clock, gpio, and uart setup. There is no SPL support for A23, as we do not have any documentation or sample code for DRAM initialization. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-10-22 08:47:44 +00:00			`/*`
			`* (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>`
			`*`
			`* Configuration settings for the Allwinner A23 (sun8i) CPU`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`/*`
			`* A23 specific configuration`
			`*/`
sun8i: Add dram initialization support Based on the register / dram_para headers from the Allwinner u-boot / linux sources + the init sequences from boot0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-12-07 13:34:27 +00:00
sunxi: A23/A33/H3: Move sun8i secure monitor to SRAM A2 So far for the H3, A23, and A33 SoCs, we use DRAM to hold the secure monitor code (providing PSCI runtime services). And while those SoCs do not have the secure SRAM B like older SoCs, there is enough (secure) SRAM A2 to put the monitor code and data in there instead. Follow the design of 64-bit SoCs and use the first part for the monitor, and the last 16 KiB for the SCP firmware. With this change, the monitor no longer needs to reserve a region in DRAM. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> [Andre: amend commit message, fix R40 and V3s build] Signed-off-by: Andre Przywara <andre.przywara@arm.com> 2021-04-19 03:21:41 +00:00			`#ifdef SUNXI_SRAM_A2_SIZE`
			`/*`
			`* If the SoC has enough SRAM A2, use that for the secure monitor.`
			`* Skip the first 16 KiB of SRAM A2, which is not usable, as only certain bytes`
			`* are writable. Reserve the last 17 KiB for the resume shim and SCP firmware.`
			`*/`
			`#define CONFIG_ARMV7_SECURE_BASE (SUNXI_SRAM_A2_BASE + 16 * 1024)`
			`#define CONFIG_ARMV7_SECURE_MAX_SIZE (SUNXI_SRAM_A2_SIZE - 33 * 1024)`
			`#endif`

ARM: sunxi: Add basic A23 support The basic blocks of the A23 are similar to the A31 (sun6i). Re-use sun6i code for initial clock, gpio, and uart setup. There is no SPL support for A23, as we do not have any documentation or sample code for DRAM initialization. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-10-22 08:47:44 +00:00			`/*`
			`* Include common sunxi configuration where most the settings are`
			`*/`
			`#include <configs/sunxi-common.h>`

			`#endif /* __CONFIG_H */`