u-boot/include/configs/tqma6_mba6.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2013 - 2017 Markus Niebel <Markus.Niebel@tq-group.com>
 *
 * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module on
 * MBa6 starter kit
 */

#ifndef __CONFIG_TQMA6_MBA6_H
#define __CONFIG_TQMA6_MBA6_H

#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"

#define CONFIG_FEC_MXC_PHYADDR		0x03

#define CONFIG_MXC_UART_BASE		UART2_BASE
#define CONSOLE_DEV		"ttymxc1"

#endif /* __CONFIG_TQMA6_MBA6_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
arm: mx6: tqma6: Extract baseboard configs into separate config file This patch extracts all baseboard specific defines into a separate config file. This makes it easier to add other baseboards that use the TQMa6 SoM. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Markus Niebel <Markus.Niebel@tq-group.com> 2015-03-12 15:34:16 +00:00			`/*`
arm: imx6: tqma6: add support for TQMa6DL variant This adds support for TQMa6DL using i.MX6DL and 1GiB DRAM Since The module will use the same devicetree, we patch the ram size in ft_board_setup. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> 2017-02-28 15:37:33 +00:00			`* Copyright (C) 2013 - 2017 Markus Niebel <Markus.Niebel@tq-group.com>`
arm: mx6: tqma6: Extract baseboard configs into separate config file This patch extracts all baseboard specific defines into a separate config file. This makes it easier to add other baseboards that use the TQMa6 SoM. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Markus Niebel <Markus.Niebel@tq-group.com> 2015-03-12 15:34:16 +00:00			`*`
arm: imx6: tqma6: add support for TQMa6DL variant This adds support for TQMa6DL using i.MX6DL and 1GiB DRAM Since The module will use the same devicetree, we patch the ram size in ft_board_setup. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> 2017-02-28 15:37:33 +00:00			`* Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module on`
			`* MBa6 starter kit`
arm: mx6: tqma6: Extract baseboard configs into separate config file This patch extracts all baseboard specific defines into a separate config file. This makes it easier to add other baseboards that use the TQMa6 SoM. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Markus Niebel <Markus.Niebel@tq-group.com> 2015-03-12 15:34:16 +00:00			`*/`

			`#ifndef __CONFIG_TQMA6_MBA6_H`
			`#define __CONFIG_TQMA6_MBA6_H`

			`#define CONFIG_FEC_XCV_TYPE RGMII`
			`#define CONFIG_ETHPRIME "FEC"`

			`#define CONFIG_FEC_MXC_PHYADDR 0x03`

			`#define CONFIG_MXC_UART_BASE UART2_BASE`
config: Drop CONFIG_CONSOLE_DEV This is not really a config. Rename it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> 2016-10-18 02:12:39 +00:00			`#define CONSOLE_DEV "ttymxc1"`
arm: mx6: tqma6: Extract baseboard configs into separate config file This patch extracts all baseboard specific defines into a separate config file. This makes it easier to add other baseboards that use the TQMa6 SoM. This patch will be used by the upcoming WRU-IV board support which also uses the TQMa6 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Acked-By: Markus Niebel <Markus.Niebel@tq-group.com> 2015-03-12 15:34:16 +00:00
			`#endif /* __CONFIG_TQMA6_MBA6_H */`