u-boot/include/configs/imx6qdl_icore_rqs.h

147 lines
3.6 KiB
C
Raw Normal View History

/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
*
* Configuration settings for the Engicam i.CoreM6 QDL RQS Starter Kits.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __IMX6QLD_ICORE_RQS_CONFIG_H
#define __IMX6QLD_ICORE_RQS_CONFIG_H
#include <linux/sizes.h>
#include "mx6_common.h"
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE SZ_128K
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* Environment */
#ifndef CONFIG_ENV_IS_NOWHERE
/* Environment in MMC */
# if defined(CONFIG_ENV_IS_IN_MMC)
# define CONFIG_ENV_OFFSET 0x100000
# endif
#endif
/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=uImage\0" \
"fit_image=fit.itb\0" \
"console=ttymxc3\0" \
"fdt_high=0xffffffff\0" \
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"mmcpart=1\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
"fitboot=echo Booting FIT image from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
"_mmcboot=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootm; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootm; " \
"fi\0" \
"mmcboot=echo Booting from mmc ...; " \
"mmc dev ${mmcdev};" \
"if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loadfit; then " \
"run fitboot; " \
"else " \
"if run loadimage; then " \
"run _mmcboot; " \
"fi; " \
"fi; " \
"fi; " \
"fi\0"
#define CONFIG_BOOTCOMMAND "run $modeboot"
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_SP_OFFSET)
/* FIT */
#ifdef CONFIG_FIT
# define CONFIG_IMAGE_FORMAT_LEGACY
#endif
/* UART */
#ifdef CONFIG_MXC_UART
# define CONFIG_MXC_UART_BASE UART4_BASE
#endif
/* MMC */
#ifdef CONFIG_FSL_USDHC
# define CONFIG_SYS_MMC_ENV_DEV 0
# define CONFIG_SYS_FSL_USDHC_NUM 2
# define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif
/* Ethernet */
#ifdef CONFIG_FEC_MXC
# define CONFIG_FEC_MXC_PHYADDR 3
# define CONFIG_FEC_XCV_TYPE RGMII
# define CONFIG_MII
# define CONFIG_PHYLIB
# define CONFIG_PHY_MICREL
# define CONFIG_PHY_MICREL_KSZ9021
#endif
/* SPL */
#ifdef CONFIG_SPL
# define CONFIG_SPL_MMC_SUPPORT
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
# undef CONFIG_DM_GPIO
# undef CONFIG_DM_MMC
# endif
#endif
#endif /* __IMX6QLD_ICORE_RQS_CONFIG_H */