u-boot/board/LEOX/elpt860/flash.c

603 lines
13 KiB
C
Raw Normal View History

/*
**=====================================================================
**
** Copyright (C) 2000, 2001, 2002, 2003
** The LEOX team <team@leox.org>, http://www.leox.org
**
** LEOX.org is about the development of free hardware and software resources
** for system on chip.
**
** Description: U-Boot port on the LEOX's ELPT860 CPU board
** ~~~~~~~~~~~
**
**=====================================================================
**
* SPDX-License-Identifier: GPL-2.0+
**
**=====================================================================
*/
/*
** Note 1: In this file, you have to provide the following variable:
** ------
** flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]
** 'flash_info_t' structure is defined into 'include/flash.h'
** and defined as extern into 'common/cmd_flash.c'
**
** Note 2: In this file, you have to provide the following functions:
** ------
** unsigned long flash_init(void)
** called from 'board_init_r()' into 'common/board.c'
**
** void flash_print_info(flash_info_t *info)
** called from 'do_flinfo()' into 'common/cmd_flash.c'
**
** int flash_erase(flash_info_t *info,
** int s_first,
** int s_last)
** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c'
**
** int write_buff (flash_info_t *info,
** uchar *src,
** ulong addr,
** ulong cnt)
** called from 'flash_write()' into 'common/cmd_flash.c'
*/
#include <common.h>
#include <mpc8xx.h>
#ifndef CONFIG_ENV_ADDR
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#endif
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Internal Functions
*/
static void flash_get_offsets (ulong base, flash_info_t *info);
static ulong flash_get_size (volatile unsigned char *addr, flash_info_t *info);
static int write_word (flash_info_t *info, ulong dest, ulong data);
static int write_byte (flash_info_t *info, ulong dest, uchar data);
/*-----------------------------------------------------------------------
*/
unsigned long
flash_init (void)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0;
int i;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
{
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM,
&flash_info[0]);
if ( flash_info[0].flash_id == FLASH_UNKNOWN )
{
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* Remap FLASH according to real size */
memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
/* Re-do sizing to get full correct info */
size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE,
&flash_info[0]);
flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1,
&flash_info[0]);
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1,
&flash_info[0]);
#endif
flash_info[0].size = size_b0;
return (size_b0);
}
/*-----------------------------------------------------------------------
*/
static void
flash_get_offsets (ulong base,
flash_info_t *info)
{
int i;
#define SECTOR_64KB 0x00010000
/* set up sector start adress table */
for (i = 0; i < info->sector_count; i++)
{
info->start[i] = base + (i * SECTOR_64KB);
}
}
/*-----------------------------------------------------------------------
*/
void
flash_print_info (flash_info_t *info)
{
int i;
if ( info->flash_id == FLASH_UNKNOWN )
{
printf ("missing or unknown FLASH type\n");
return;
}
switch ( info->flash_id & FLASH_VENDMASK )
{
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_STM: printf ("STM (Thomson) "); break;
default: printf ("Unknown Vendor "); break;
}
switch ( info->flash_id & FLASH_TYPEMASK )
{
case FLASH_AM040: printf ("AM29F040 (4 Mbits)\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i)
{
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
return;
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong
flash_get_size (volatile unsigned char *addr,
flash_info_t *info)
{
short i;
uchar value;
ulong base = (ulong)addr;
/* Write auto select command: read Manufacturer ID */
addr[0x0555] = 0xAA;
addr[0x02AA] = 0x55;
addr[0x0555] = 0x90;
value = addr[0];
switch ( value )
{
/* case AMD_MANUFACT: */
case 0x01:
info->flash_id = FLASH_MAN_AMD;
break;
/* case FUJ_MANUFACT: */
case 0x04:
info->flash_id = FLASH_MAN_FUJ;
break;
/* case STM_MANUFACT: */
case 0x20:
info->flash_id = FLASH_MAN_STM;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
value = addr[1]; /* device ID */
switch ( value )
{
case STM_ID_F040B:
case AMD_ID_F040B:
info->flash_id += FLASH_AM040; /* 4 Mbits = 512k * 8 */
info->sector_count = 8;
info->size = 0x00080000;
break;
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
}
/* set up sector start adress table */
for (i = 0; i < info->sector_count; i++)
{
info->start[i] = base + (i * 0x00010000);
}
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++)
{
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
addr = (volatile unsigned char *)(info->start[i]);
info->protect[i] = addr[2] & 1;
}
/*
* Prevent writes to uninitialized FLASH.
*/
if ( info->flash_id != FLASH_UNKNOWN )
{
addr = (volatile unsigned char *)info->start[0];
*addr = 0xF0; /* reset bank */
}
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int
flash_erase (flash_info_t *info,
int s_first,
int s_last)
{
volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
int flag, prot, sect, l_sect;
ulong start, now, last;
if ( (s_first < 0) || (s_first > s_last) )
{
if ( info->flash_id == FLASH_UNKNOWN )
{
printf ("- missing\n");
}
else
{
printf ("- no sectors to erase\n");
}
return ( 1 );
}
if ( (info->flash_id == FLASH_UNKNOWN) ||
(info->flash_id > FLASH_AMD_COMP) )
{
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return ( 1 );
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect)
{
if ( info->protect[sect] )
{
prot++;
}
}
if ( prot )
{
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
}
else
{
printf ("\n");
}
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr[0x0555] = 0xAA;
addr[0x02AA] = 0x55;
addr[0x0555] = 0x80;
addr[0x0555] = 0xAA;
addr[0x02AA] = 0x55;
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++)
{
if (info->protect[sect] == 0) /* not protected */
{
addr = (volatile unsigned char *)(info->start[sect]);
addr[0] = 0x30;
l_sect = sect;
}
}
/* re-enable interrupts if necessary */
if ( flag )
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
/*
* We wait for the last triggered sector
*/
if ( l_sect < 0 )
goto DONE;
start = get_timer (0);
last = start;
addr = (volatile unsigned char *)(info->start[l_sect]);
while ( (addr[0] & 0x80) != 0x80 )
{
if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT )
{
printf ("Timeout\n");
return ( 1 );
}
/* show that we're waiting */
if ( (now - last) > 1000 ) /* every second */
{
putc ('.');
last = now;
}
}
DONE:
/* reset to read mode */
addr = (volatile unsigned char *)info->start[0];
addr[0] = 0xF0; /* reset bank */
printf (" done\n");
return ( 0 );
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int
write_buff (flash_info_t *info,
uchar *src,
ulong addr,
ulong cnt)
{
ulong cp, wp, data;
uchar bdata;
int i, l, rc;
if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 )
{
/* Width of the data bus: 8 bits */
wp = addr;
while ( cnt )
{
bdata = *src++;
if ( (rc = write_byte(info, wp, bdata)) != 0 )
{
return (rc);
}
++wp;
--cnt;
}
return ( 0 );
}
else
{
/* Width of the data bus: 32 bits */
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ( (l = addr - wp) != 0 )
{
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp)
{
data = (data << 8) | (*(uchar *)cp);
}
for (; i<4 && cnt>0; ++i)
{
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp)
{
data = (data << 8) | (*(uchar *)cp);
}
if ( (rc = write_word(info, wp, data)) != 0 )
{
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while ( cnt >= 4 )
{
data = 0;
for (i=0; i<4; ++i)
{
data = (data << 8) | *src++;
}
if ( (rc = write_word(info, wp, data)) != 0 )
{
return (rc);
}
wp += 4;
cnt -= 4;
}
if ( cnt == 0 )
{
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp)
{
data = (data << 8) | *src++;
--cnt;
}
for (; i<4; ++i, ++cp)
{
data = (data << 8) | (*(uchar *)cp);
}
return (write_word(info, wp, data));
}
}
/*-----------------------------------------------------------------------
* Write a word to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int
write_word (flash_info_t *info,
ulong dest,
ulong data)
{
vu_long *addr = (vu_long*)(info->start[0]);
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ( (*((vu_long *)dest) & data) != data )
{
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr[0x0555] = 0x00AA00AA;
addr[0x02AA] = 0x00550055;
addr[0x0555] = 0x00A000A0;
*((vu_long *)dest) = data;
/* re-enable interrupts if necessary */
if ( flag )
enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) )
{
if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
{
return (1);
}
}
return (0);
}
/*-----------------------------------------------------------------------
* Write a byte to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int
write_byte (flash_info_t *info,
ulong dest,
uchar data)
{
volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ( (*((volatile unsigned char *)dest) & data) != data )
{
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr[0x0555] = 0xAA;
addr[0x02AA] = 0x55;
addr[0x0555] = 0xA0;
*((volatile unsigned char *)dest) = data;
/* re-enable interrupts if necessary */
if ( flag )
enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) )
{
if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
{
return (1);
}
}
return (0);
}
/*-----------------------------------------------------------------------
*/