mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 05:23:34 +00:00
50 lines
1.6 KiB
Text
50 lines
1.6 KiB
Text
|
Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
|
||
|
|
||
|
Reference
|
||
|
This binding uses the common clock binding[1].
|
||
|
|
||
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||
|
[2] http://www.ti.com/product/cdce913
|
||
|
[3] http://www.ti.com/product/cdce925
|
||
|
[4] http://www.ti.com/product/cdce937
|
||
|
[5] http://www.ti.com/product/cdce949
|
||
|
|
||
|
The driver provides clock sources for each output Y1 through Y5.
|
||
|
|
||
|
Required properties:
|
||
|
- compatible: Shall be one of the following:
|
||
|
- "ti,cdce913": 1-PLL, 3 Outputs
|
||
|
- "ti,cdce925": 2-PLL, 5 Outputs
|
||
|
- "ti,cdce937": 3-PLL, 7 Outputs
|
||
|
- "ti,cdce949": 4-PLL, 9 Outputs
|
||
|
- reg: I2C device address.
|
||
|
- clocks: Points to a fixed parent clock that provides the input frequency.
|
||
|
- #clock-cells: From common clock bindings: Shall be 1.
|
||
|
|
||
|
Optional properties:
|
||
|
- xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
|
||
|
board, or to compensate for external influences.
|
||
|
|
||
|
For all PLL1, PLL2, ... an optional child node can be used to specify spread
|
||
|
spectrum clocking parameters for a board.
|
||
|
- spread-spectrum: SSC mode as defined in the data sheet.
|
||
|
- spread-spectrum-center: Use "centered" mode instead of "max" mode. When
|
||
|
present, the clock runs at the requested frequency on average. Otherwise
|
||
|
the requested frequency is the maximum value of the SCC range.
|
||
|
|
||
|
|
||
|
Example:
|
||
|
|
||
|
clockgen: cdce925pw@64 {
|
||
|
compatible = "cdce925";
|
||
|
reg = <0x64>;
|
||
|
clocks = <&xtal_27Mhz>;
|
||
|
#clock-cells = <1>;
|
||
|
xtal-load-pf = <5>;
|
||
|
/* PLL options to get SSC 1% centered */
|
||
|
PLL2 {
|
||
|
spread-spectrum = <4>;
|
||
|
spread-spectrum-center;
|
||
|
};
|
||
|
};
|