u-boot/board/solidrun/clearfog/Kconfig

43 lines
1.6 KiB
Text
Raw Normal View History

menu "ClearFog configuration"
depends on TARGET_CLEARFOG
config TARGET_CLEARFOG_BASE
bool "Use ClearFog Base static configuration"
help
Use the ClearFog Base as the static configuration instead of the
default which uses the ClearFog Pro.
Runtime board detection is always attempted and used if available. The
static configuration is used as a fallback in cases where runtime
detection is disabled, is not available in hardware, or otherwise fails.
Only newer revisions of the ClearFog product line support runtime
detection via additional EEPROM hardware. This option enables selecting
the Base variant for older hardware revisions.
config CLEARFOG_CON3_SATA
bool "Use CON3 slot in SATA mode"
help
Use the CON3 port with SATA protocol instead of the default PCIe.
The ClearFog port allows usage of either mSATA or miniPCIe
modules, but the desired protocol must be configured at build
time since it affects the SerDes topology layout.
config CLEARFOG_CON2_SATA
bool "Use CON2 slot in SATA mode"
depends on !TARGET_CLEARFOG_BASE
help
Use the CON2 port with SATA protocol instead of the default PCIe.
The ClearFog port allows usage of either mSATA or miniPCIe
modules, but the desired protocol must be configured at build
time since it affects the SerDes topology layout.
config CLEARFOG_SFP_25GB
bool "Enable 2.5 Gbps mode for SFP"
help
Set the SFP module connection to support 2.5 Gbps transfer speed for the
SGMII connection (requires a supporting SFP). By default, transfer speed
of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module.
endmenu