u-boot/arch/arm/dts/kirkwood-dreamplug.dts

132 lines
2.2 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Dreamplug";
compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
aliases {
spi0 = &spi0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_led_bluetooth: pmx-led-bluetooth {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_led_wifi: pmx-led-wifi {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_wifi_ap: pmx-led-wifi-ap {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
spi@10600 {
status = "okay";
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
partition@0 {
reg = <0x0 0x80000>;
label = "u-boot";
};
partition@100000 {
reg = <0x100000 0x10000>;
label = "u-boot env";
};
partition@180000 {
reg = <0x180000 0x10000>;
label = "dtb";
};
};
};
sata@80000 {
status = "okay";
nr-ports = <1>;
};
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
broken-cd;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
&pmx_led_wifi_ap >;
pinctrl-names = "default";
bluetooth {
label = "dreamplug:blue:bluetooth";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wifi {
label = "dreamplug:green:wifi";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wifi-ap {
label = "dreamplug:green:wifi_ap";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};