u-boot/configs/sagem_f@st1704_ram_defconfig

CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARCH_BMIPS=y
CONFIG_SOC_BMIPS_BCM6338=y
# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="F@ST1704 # "
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_SAVEENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_DEFAULT_DEVICE_TREE="sagem,f@st1704"
CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_DM_GPIO=y
CONFIG_BCM6345_GPIO=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_BCM6348_ETH=y
CONFIG_DM_RESET=y
CONFIG_RESET_BCM6345=y
CONFIG_DM_SERIAL=y
CONFIG_BCM6345_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_BCM63XX_SPI=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_MIPS=y`
			`CONFIG_SYS_TEXT_BASE=0x80010000`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-04-29 19:54:04 +00:00			`CONFIG_NR_DRAM_BANKS=1`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`CONFIG_ARCH_BMIPS=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_SOC_BMIPS_BCM6338=y`
			`# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set`
			`# CONFIG_MIPS_BOOT_ENV_LEGACY is not set`
			`CONFIG_MIPS_BOOT_FDT=y`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
			`CONFIG_OF_STDOUT_VIA_ALIAS=y`
			`CONFIG_DISPLAY_CPUINFO=y`
			`CONFIG_HUSH_PARSER=y`
			`CONFIG_SYS_PROMPT="F@ST1704 # "`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`CONFIG_CMD_CPU=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_CMD_LICENSE=y`
			`# CONFIG_CMD_BOOTD is not set`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`# CONFIG_CMD_ELF is not set`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`# CONFIG_CMD_XIMG is not set`
			`# CONFIG_CMD_EXPORTENV is not set`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`# CONFIG_CMD_IMPORTENV is not set`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`# CONFIG_CMD_EDITENV is not set`
			`# CONFIG_CMD_SAVEENV is not set`
			`# CONFIG_CMD_ENV_EXISTS is not set`
			`# CONFIG_CMD_CRC32 is not set`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`CONFIG_CMD_MEMINFO=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`# CONFIG_CMD_FLASH is not set`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2017-08-14 23:58:53 +00:00			`# CONFIG_CMD_LOADS is not set`
mips: bmips: enable the SPI flash on the Sagem F@ST1704 It's a Winbond (w25x32) 4 MB SPI flash. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-01-23 16:15:04 +00:00			`CONFIG_CMD_SF=y`
			`CONFIG_CMD_SPI=y`
bmips: enable f@st1704 enet support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2018-12-01 18:00:26 +00:00			`CONFIG_CMD_MII=y`
			`CONFIG_CMD_PING=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`# CONFIG_CMD_MISC is not set`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-09-03 19:26:12 +00:00			`CONFIG_DEFAULT_DEVICE_TREE="sagem,f@st1704"`
bmips: enable f@st1704 enet support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2018-12-01 18:00:26 +00:00			`CONFIG_NET_RANDOM_ETHADDR=y`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`# CONFIG_DM_DEVICE_REMOVE is not set`
bmips: enable f@st1704 enet support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2018-12-01 18:00:26 +00:00			`CONFIG_BCM6348_IUDMA=y`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`CONFIG_DM_GPIO=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_BCM6345_GPIO=y`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`CONFIG_LED=y`
			`CONFIG_LED_GPIO=y`
mips: bmips: enable the SPI flash on the Sagem F@ST1704 It's a Winbond (w25x32) 4 MB SPI flash. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-01-23 16:15:04 +00:00			`CONFIG_DM_SPI_FLASH=y`
			`CONFIG_SPI_FLASH=y`
			`CONFIG_SPI_FLASH_WINBOND=y`
			`CONFIG_SPI_FLASH_MTD=y`
bmips: enable f@st1704 enet support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 2018-12-01 18:00:26 +00:00			`CONFIG_PHY_FIXED=y`
			`CONFIG_DM_ETH=y`
			`CONFIG_BCM6348_ETH=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_DM_RESET=y`
MIPS: add BMIPS Sagem F@ST1704 board Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-05-16 16:46:59 +00:00			`CONFIG_RESET_BCM6345=y`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_DM_SERIAL=y`
			`CONFIG_BCM6345_SERIAL=y`
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-15 17:51:26 +00:00			`CONFIG_SPI=y`
mips: bmips: enable the SPI flash on the Sagem F@ST1704 It's a Winbond (w25x32) 4 MB SPI flash. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2018-01-23 16:15:04 +00:00			`CONFIG_DM_SPI=y`
			`CONFIG_BCM63XX_SPI=y`