u-boot/drivers/i2c/muxes/Kconfig

46 lines
1.6 KiB
Text
Raw Normal View History

config I2C_MUX
bool "Support I2C multiplexers"
depends on DM_I2C
help
This enables I2C buses to be multiplexed, so that you can select
one of several buses using some sort of control mechanism. The
bus select is handled automatically when that bus is accessed,
using a suitable I2C MUX driver.
config SPL_I2C_MUX
bool "Support I2C multiplexers on SPL"
depends on I2C_MUX
help
This enables I2C buses to be multiplexed, so that you can select
one of several buses using some sort of control mechanism. The
bus select is handled automatically when that bus is accessed,
using a suitable I2C MUX driver.
config I2C_ARB_GPIO_CHALLENGE
bool "GPIO-based I2C arbitration"
depends on I2C_MUX
help
If you say yes to this option, support will be included for an
I2C multimaster arbitration scheme using GPIOs and a challenge &
response mechanism where masters have to claim the bus by asserting
a GPIO.
config I2C_MUX_PCA954x
tristate "TI PCA954x I2C Mux/switches"
depends on I2C_MUX
help
If you say yes here you get support for the TI PCA954x
I2C mux/switch devices. It is x width I2C multiplexer which enables to
partitioning I2C bus and connect multiple devices with the same address
to the same I2C controller where driver handles proper routing to
target i2c device. PCA9544 and PCA9548 are supported.
config I2C_MUX_GPIO
tristate "GPIO-based I2C multiplexer"
depends on I2C_MUX && DM_GPIO
help
If you say yes to this option, support will be included for
a GPIO based I2C multiplexer. This driver provides access to
I2C busses connected through a MUX, which is controlled
through GPIO pins.