u-boot/include/nand.h

141 lines
4 KiB
C
Raw Permalink Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* (C) Copyright 2005
* 2N Telekomunikace, a.s. <www.2n.cz>
* Ladislav Michl <michl@2n.cz>
*/
#ifndef _NAND_H_
#define _NAND_H_
#include <config.h>
extern void nand_init(void);
unsigned long nand_size(void);
#include <linux/compat.h>
#include <linux/mtd/mtd.h>
int nand_mtd_to_devnum(struct mtd_info *mtd);
#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT)
void board_nand_init(void);
int nand_register(int devnum, struct mtd_info *mtd);
#else
struct nand_chip;
extern int board_nand_init(struct nand_chip *nand);
#endif
extern int nand_curr_device;
static inline int nand_read(struct mtd_info *info, loff_t ofs, size_t *len,
u_char *buf)
{
return mtd_read(info, ofs, *len, (size_t *)len, buf);
}
static inline int nand_write(struct mtd_info *info, loff_t ofs, size_t *len,
u_char *buf)
{
return mtd_write(info, ofs, *len, (size_t *)len, buf);
}
static inline int nand_block_isbad(struct mtd_info *info, loff_t ofs)
{
return mtd_block_isbad(info, ofs);
}
static inline int nand_erase(struct mtd_info *info, loff_t off, size_t size)
{
struct erase_info instr;
instr.mtd = info;
instr.addr = off;
instr.len = size;
return mtd_erase(info, &instr);
}
/*****************************************************************************
* declarations from nand_util.c
****************************************************************************/
typedef struct mtd_oob_ops mtd_oob_ops_t;
struct nand_erase_options {
nand erase: .spread, .part, .chip subcommands A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html, Michele De Candia posted a patch to not count bad blocks toward the requested size to be erased. This is desireable when you're passing in something like $filesize, but not when you're trying to erase a partition. Thus, a .spread subcommand (named for consistency with http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced to make explicit the user's desire to erase for a given amount of data, rather than to erase a specific region of the chip. While passing $filesize to "nand erase" is useful, accidentally passing something like $fliesize currently produces quite unpleasant results, as the variable evaluates to nothing and U-Boot assumes that you want to erase the entire rest of the chip/partition. To improve the safety of the erase command, require the user to make explicit their intentions by using a .part or .chip subcommand. This is an incompatible user interface change, but keeping compatibility would eliminate the safety gain, and IMHO it's worth it. While touching nand_erase_opts(), make it accept 64-bit offsets and sizes, fix the percentage display when erase length is rounded up, eliminate an inconsistent warning about rounding up the erase length which only happened when the length was less than one block (rounding up for $filesize is normal operation), and add a diagnostic if there's an attempt to erase beginning at a non-block boundary. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-25 19:43:29 +00:00
loff_t length; /* number of bytes to erase */
loff_t offset; /* first address in NAND to erase */
int quiet; /* don't display progress messages */
int jffs2; /* if true: format for jffs2 usage
* (write appropriate cleanmarker blocks) */
int scrub; /* if true, really clean NAND by erasing
* bad blocks (UNSAFE) */
nand erase: .spread, .part, .chip subcommands A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html, Michele De Candia posted a patch to not count bad blocks toward the requested size to be erased. This is desireable when you're passing in something like $filesize, but not when you're trying to erase a partition. Thus, a .spread subcommand (named for consistency with http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced to make explicit the user's desire to erase for a given amount of data, rather than to erase a specific region of the chip. While passing $filesize to "nand erase" is useful, accidentally passing something like $fliesize currently produces quite unpleasant results, as the variable evaluates to nothing and U-Boot assumes that you want to erase the entire rest of the chip/partition. To improve the safety of the erase command, require the user to make explicit their intentions by using a .part or .chip subcommand. This is an incompatible user interface change, but keeping compatibility would eliminate the safety gain, and IMHO it's worth it. While touching nand_erase_opts(), make it accept 64-bit offsets and sizes, fix the percentage display when erase length is rounded up, eliminate an inconsistent warning about rounding up the erase length which only happened when the length was less than one block (rounding up for $filesize is normal operation), and add a diagnostic if there's an attempt to erase beginning at a non-block boundary. Signed-off-by: Scott Wood <scottwood@freescale.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-25 19:43:29 +00:00
/* Don't include skipped bad blocks in size to be erased */
int spread;
/* maximum size that actual may be in order to not exceed the buf */
loff_t lim;
};
typedef struct nand_erase_options nand_erase_options_t;
int nand_read_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length,
size_t *actual, loff_t lim, u_char *buffer);
#define WITH_DROP_FFS (1 << 0) /* drop trailing all-0xff pages */
#define WITH_WR_VERIFY (1 << 1) /* verify data was written correctly */
int nand_write_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length,
size_t *actual, loff_t lim, u_char *buffer, int flags);
int nand_erase_opts(struct mtd_info *mtd,
const nand_erase_options_t *opts);
int nand_torture(struct mtd_info *mtd, loff_t offset);
int nand_verify_page_oob(struct mtd_info *mtd, struct mtd_oob_ops *ops,
loff_t ofs);
int nand_verify(struct mtd_info *mtd, loff_t ofs, size_t len, u_char *buf);
#define NAND_LOCK_STATUS_TIGHT 0x01
#define NAND_LOCK_STATUS_UNLOCK 0x04
int nand_lock(struct mtd_info *mtd, int tight);
int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
int allexcept);
int nand_get_lock_status(struct mtd_info *mtd, loff_t offset);
u32 nand_spl_adjust_offset(u32 sector, u32 offs);
int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst);
int nand_spl_read_block(int block, int offset, int len, void *dst);
void nand_deselect(void);
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
__attribute__((noreturn)) void nand_boot(void);
NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB) This is a re-submission of the patch by Harald Welte <laforge@openmoko.org> with minor modifications for rebase and changes as suggested by Scott Wood <scottwood@freescale.com> [1] [2]. This patch enables the environment partition to have a run-time dynamic location (offset) in the NAND flash. The reason for this is simply that all NAND flashes have factory-default bad blocks, and a fixed compile time offset would mean that sometimes the environment partition would live inside factory bad blocks. Since the number of factory default blocks can be quite high (easily 1.3MBytes in current standard components), it is not economic to keep that many spare blocks inside the environment partition. With this patch and CONFIG_ENV_OFFSET_OOB enabled, the location of the environment partition is stored in the out-of-band (OOB) data of the first block in flash. Since the first block is where most systems boot from, the vendors guarantee that the first block is not a factory default block. This patch introduces the 'nand env.oob' command, which can be called from the u-boot command line. 'nand env.oob get' reads the address of the environment partition from the OOB data, 'nand env.oob set {offset,partition-name}' allows the setting of the marker by specifying a numeric offset or a partition name. [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/43916 [2] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/79195 Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Harald Welte <laforge@gnumonks.org>
2010-07-05 17:27:07 +00:00
#ifdef CONFIG_ENV_OFFSET_OOB
#define ENV_OOB_MARKER 0x30425645 /*"EVB0" in little-endian -- offset is stored
as block number*/
#define ENV_OOB_MARKER_OLD 0x30564e45 /*"ENV0" in little-endian -- offset is
stored as byte number */
#define ENV_OFFSET_SIZE 8
int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result);
NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB) This is a re-submission of the patch by Harald Welte <laforge@openmoko.org> with minor modifications for rebase and changes as suggested by Scott Wood <scottwood@freescale.com> [1] [2]. This patch enables the environment partition to have a run-time dynamic location (offset) in the NAND flash. The reason for this is simply that all NAND flashes have factory-default bad blocks, and a fixed compile time offset would mean that sometimes the environment partition would live inside factory bad blocks. Since the number of factory default blocks can be quite high (easily 1.3MBytes in current standard components), it is not economic to keep that many spare blocks inside the environment partition. With this patch and CONFIG_ENV_OFFSET_OOB enabled, the location of the environment partition is stored in the out-of-band (OOB) data of the first block in flash. Since the first block is where most systems boot from, the vendors guarantee that the first block is not a factory default block. This patch introduces the 'nand env.oob' command, which can be called from the u-boot command line. 'nand env.oob get' reads the address of the environment partition from the OOB data, 'nand env.oob set {offset,partition-name}' allows the setting of the marker by specifying a numeric offset or a partition name. [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/43916 [2] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/79195 Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Acked-by: Harald Welte <laforge@gnumonks.org>
2010-07-05 17:27:07 +00:00
#endif
int spl_nand_erase_one(int block, int page);
/* platform specific init functions */
void sunxi_nand_init(void);
/*
* get_nand_dev_by_index - Get the nand info based in index.
*
* @dev - index to the nand device.
*
* returns pointer to the nand device info structure or NULL on failure.
*/
struct mtd_info *get_nand_dev_by_index(int dev);
#endif /* _NAND_H_ */