social-engineer-toolkit/src/wireless/airmon-ng

#!/bin/sh

USERID=""
IFACE=""
KISMET=/etc/kismet/kismet.conf
CH=$3; [ x$3 = "x" ] && CH=10
IFACE_FOUND="false"
MADWIFI=0
MAC80211=0
USE_IW=0
IW_SOURCE="http://wireless.kernel.org/download/iw/iw-3.8.tar.bz2"
IW_ERROR=""
UDEV_ISSUE=0

if [ -f "`which iw 2>&1`" ]
then
	USE_IW=1
fi

if [ "x$MON_PREFIX" = "x" ]
then
MON_PREFIX="mon"
fi

PROCESSES="wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\|ifplugd\|dhcdbd\|dhcpcd\|NetworkManager\|knetworkmanager\|avahi-autoipd\|avahi-daemon\|wlassistant\|wifibox"
PS_ERROR="invalid"

usage() {
	printf "usage: `basename $0` <start|stop|check> <interface> [channel or frequency]\n"
	echo
	exit
}

startStdIface() {
	iwconfig $1 mode monitor >/dev/null 2>&1
	if [ ! -z $2 ]
	then
	    if [ $2 -lt 1000 ]
	    then
		iwconfig $1 channel $2 >/dev/null 2>&1
	    else
		iwconfig $1 freq "$2"000000 > /dev/null 2>&1
	    fi
	fi
	iwconfig $1 key off >/dev/null 2>&1
	ifconfig $1 up
	printf " (monitor mode enabled)"
}


stopStdIface() {
	ifconfig $1 down >/dev/null 2>&1
	iwconfig $1 mode Managed >/dev/null 2>&1
	ifconfig $1 down >/dev/null 2>&1
	printf " (monitor mode disabled)"
}

getModule() {
    if [ -f "/sys/class/net/$1/device/driver/module/srcversion" ]
    then
        srcver1=`cat "/sys/class/net/$1/device/driver/module/srcversion"`
        for j in `lsmod | awk '{print $1}' | grep -v "^Module$"`
        do
            srcver2="`modinfo $j 2>/dev/null | grep srcversion | awk '{print $2}'`"
            if [ $srcver1 = "$srcver2" ]
            then
                MODULE=$j
                break
            fi
        done
    else
        MODULE=""
    fi
#    return 0
}

getDriver() {
   if [ -e "/sys/class/net/$1/device/driver" ]
   then
       DRIVER="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
       BUS="`ls -l "/sys/class/net/$1/device/driver" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)\/.*\/.*$/\1/'`"
   else
       DRIVER=""
       BUS=""
   fi
   if [ x$(echo $DRIVER | grep ath5k) != "x" ]
   then
       DRIVER="ath5k"
   fi
   if [ x$(echo $DRIVER | grep ath9k) != "x" ]
   then
       DRIVER="ath9k"
   fi
   if [ x$DRIVER = "x" ]
   then
	if [ -d /sys/class/net/tiwlan0/wireless ]
	then
		DRIVER=WiLink
	fi
   fi

}

scanProcesses() {
    if [ -f "`which service 2>&1`" ] && [ x"$1" = "xkill" ]
    then
    	service network-manager stop 2>/dev/null >/dev/null
 	service avahi-daemon stop 2>/dev/null >/dev/null
    fi

    match=`ps -A -o comm= | grep $PROCESSES | grep -v grep | wc -l`
    if [ $match -gt 0 -a x"$1" != "xkill" ]
    then
        printf "\n\n"
        echo "Found $match processes that could cause trouble."
        echo "If airodump-ng, aireplay-ng or airtun-ng stops working after"
        echo "a short period of time, you may want to kill (some of) them!"
        echo -e "\nPID\tName"
    else
        if [ x"$1" != "xkill" ]
        then
            return
        fi
    fi

    if [ $match -gt 0 -a x"$1" = "xkill" ]
    then
        echo "Killing all those processes..."
    fi

    i=1
    while [ $i -le $match ]
    do
        pid=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $1}'`
        pname=`ps -A -o pid= -o comm= | grep $PROCESSES | grep -v grep | head -n $i | tail -n 1 | awk '{print $2}'`
        if [ x"$1" != "xkill" ]
        then
            printf "$pid\t$pname\n"
        else
            kill $pid
        fi
        i=$(($i+1))
    done
}

checkProcessesIface() {
    if [ x"$1" = "x" ]
    then
        return
    fi

    match2=`ps -o comm= -p 1 2>&1 | grep $PS_ERROR | grep -v grep | wc -l`
    if [ $match2 -gt 0 ]
    then
	return
    fi

    for i in `ps auxw | grep $1 | grep -v "grep" | grep -v "airmon-ng" | awk '{print $2}'`
    do
        pname=`ps -o comm= -p $i`
        echo "Process with PID $i ($pname) is running on interface $1"
    done
}

getStack() {
    if [ x"$1" = "x" ]
    then
        return
    fi

    if [ -d /sys/class/net/$1/phy80211/ ]
    then
        MAC80211=1
    else
        MAC80211=0
    fi
}

#you need to run getDriver $iface prior to getChipset
getChipset() {
    if [ x"$1" = "x" ]
    then
        return
    fi

    CHIPSET="Unknown "

    if [ x$DRIVER = "xOtus" -o x$DRIVER = "xarusb_lnx" ]
    then
		CHIPSET="AR9001U"
    fi

    if [ x$DRIVER = "xWiLink" ]
    then
	CHIPSET=`dmesg | grep TIWLAN | grep CHIP | tail -n 1 | awk -F\  '{ print $6 }'` 
   	if [ x$CHIPSET = "x" ]
	then
		CHIPSET="Unknown"
	else
		CHIPSET="TI${CHIPSET}"	
	fi 
    fi
    
    if [ x$DRIVER = "xar9170usb" ]
    then
    	getPhy $2
    	CHIPSET="Atheros `dmesg | grep $PHYDEV | grep "is registered as" | cut -d':' -f 2 | cut -d' ' -f 3`"
    fi

    if [ x$DRIVER = "xzd1211rw_mac80211" ]
    then
        CHIPSET="ZyDAS 1211"
    fi

	if [ x$DRIVER = "xzd1211rw" ]
    then
        getPhy $2
        TEMP_USBPORT="`dmesg | grep $PHYDEV | grep zd1211rw | cut -d'w' -f 2 | cut -d' ' -f 2`"
        TEMP_CHIPSET="`dmesg | grep "$TEMP_USBPORT" | grep chip | tail -n 1 | cut -d':' -f 3 | cut -d' ' -f 2`"
        CHIPSET="Zydas $TEMP_CHIPSET"
    fi

    if [ x$DRIVER = "xacx" -o x$DRIVER = "xacx-mac80211" -o x$DRIVER = "xacx1xx" ]
    then
        CHIPSET="TI ACX1xx"
    fi

    if [ x$DRIVER = "adm8211" ]
    then
        CHIPSET="ADMtek 8211"
    fi

    if [ x$DRIVER = "xat76_usb" ]
    then
        CHIPSET="Atmel   "
    fi

    if [ x$DRIVER = "xb43" -o x$DRIVER = "xb43legacy" -o x$DRIVER = "xbcm43xx" -o x$DRIVER = "xwl" ]
    then
        CHIPSET="Broadcom"
        if [ x$DRIVER = "xb43" ]
        then
        	getPhy $2
        	TEMP_CHIPSET="`dmesg | grep $PHYDEV | grep found | cut -d':' -f 2 | cut -d' ' -f 3`"
        	if [ x$TEMP_CHIPSET = "x4318" ]
        	then
        		CHIPSET="$CHIPSET $TEMP_CHIPSET"
        	fi
        fi
    fi

    if [ x$DRIVER = "xprism54" -o x$DRIVER = "xp54pci" -o x$DRIVER = "xp54usb" ]
    then
        CHIPSET="PrismGT "
    fi

    if [ x$DRIVER = "xhostap" ]
    then
        CHIPSET="Prism 2/2.5/3"
    fi

    if [ x$DRIVER = "xr8180" -o x$DRIVER = "xrtl8180" ]
    then
        CHIPSET="RTL8180/RTL8185"
    fi

    # r8187 is reporting itself as rtl8187
    if [ x$DRIVER = "xrtl8187" ]
    then
        getPhy $2
       if [ x"$PHYDEV" = "x" ]
       then
               CHIPSET="RTL8187 "
       else
               CHIPSET="`dmesg | grep $PHYDEV | grep hwaddr | cut -d',' -f 2 | cut -d' ' -f 2`"
               if [ x$CHIPSET = "xRTL8187vB" ]
               then
                       CHIPSET="Realtek RTL8187L"
               else
                       CHIPSET="Realtek $CHIPSET"
               fi
       fi
    fi
    
    if [ x$DRIVER = "xr8187" ]
    then
        CHIPSET="RTL8187 "
    fi

    if [ x$DRIVER = "xrt2570" -o x$DRIVER = "xrt2500usb" ]
    then
        CHIPSET="Ralink 2570 USB"
    fi

    if [ x$DRIVER = "xrt2400" -o x$DRIVER = "xrt2400pci" ]
    then
        CHIPSET="Ralink 2400 PCI"
    fi

    if [ x$DRIVER = "xrt2500" -o x$DRIVER = "xrt2500pci" ]
    then
        CHIPSET="Ralink 2560 PCI"
    fi

    if [ x$DRIVER = "xrt61" -o x$DRIVER = "xrt61pci" ]
    then
        CHIPSET="Ralink 2561 PCI"
    fi

    if [ x$DRIVER = "xrt73" -o x$DRIVER = "xrt73usb" ]
    then
        CHIPSET="Ralink 2573 USB"
    fi

	#if [ x$DRIVER = "xrt2800usb" ]
	#then
	#	getPhy $2
	#	CHIPSET="Ralink `dmesg | grep rt2800usb | grep firmware | cut -d':' -f 4 | cut -d' ' -f 3 | cut -d'.' -f 1`"
	#fi
	
    if [ x$DRIVER = "xrt2800" -o x$DRIVER = "xrt2800usb" -o x$DRIVER = "xrt3070sta" ]
    then
        CHIPSET="Ralink RT2870/3070"
    fi

    if [ x$DRIVER = "xipw2100" ]
    then
        CHIPSET="Intel 2100B"
    fi

    if [ x$DRIVER = "xipw2200" ]
    then
        CHIPSET="Intel 2200BG/2915ABG"
    fi

    if [ x$DRIVER = "xipw3945" -o x$DRIVER = "xipwraw" -o x$DRIVER = "xiwl3945" ]
    then
        CHIPSET="Intel 3945ABG"
    fi

    if [ x$DRIVER = "xipw4965" -o x$DRIVER = "xiwl4965" ]
    then
        CHIPSET="Intel 4965AGN"
    fi

    if [ x$DRIVER = "xiwlagn" -o x$DRIVER = "xiwlwifi" ]
    then
        CHIPSET="Intel 4965/5xxx/6xxx/1xxx"
        
        DETECTED_STR="`dmesg | grep $DRIVER | grep Detected | tail -n 1 `"
        LINK_POS="3"
        FOUND="0"
        
        if [ x"$DETECTED_STR" != "x" ]
        then
        	INTEL_WORD="Link"
        	if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
        	then
        		INTEL_WORD="Wireless"
        		if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
			then
				INTEL_WORD="Ultimate"
        			if [ "`echo "$DETECTED_STR" | grep $INTEL_WORD | wc -l`" = "0" ]
				then
						INTEL_WORD="Advanced"
	        		fi	
			fi
        	fi
        	
        	while [ $FOUND = "0" ]
		do
			FOUND=`echo "$DETECTED_STR" | cut -d' ' -f $LINK_POS | grep $INTEL_WORD | wc -l`
			LINK_POS=$(($LINK_POS+1))
		done

		TEMP_CHIPSET=`echo "$DETECTED_STR" | cut -d' ' -f $LINK_POS`

		case "x${TEMP_CHIPSET}" in
	#               x5100AGN)
	#                       CHIPSET="Intel $TEMP_CHIPSET"
	#                       ;;
			x5300)
				TYPE_TEMP=`echo "$DETECTED_STR" | cut -d' ' -f $(($LINK_POS+1)) | awk -F, '{ print $1 }' `
				CHIPSET="Intel ${TEMP_CHIPSET}${TYPE_TEMP}"
				;;
			x1000)
				TYPE_TEMP=`echo "$DETECTED_STR" | cut -d' ' -f $[$LINK_POS+2]`
				CHIPSET="Intel ${TEMP_CHIPSET}${TYPE_TEMP}"
				;;
			*)
				CHIPSET="Intel $TEMP_CHIPSET"
				;;
		esac
        fi

    fi

	if [ x$DRIVER = "xath5k" ]
	then
		getPhy $2
		CHIPSET="Atheros `dmesg | grep $PHYDEV | grep "chip found" | cut -d':' -f 2 | cut -d' ' -f 3`"
	fi
	
    if [ x$DRIVER = "xath_pci" ]
    then
        CHIPSET="Atheros "
    fi
    
    if [ x$DRIVER = "xath9k" ]
    then
    	getPhy $2
    	CHIPSET="Atheros `dmesg | grep $PHYDEV | grep Atheros | tail -n 1 | cut -d':' -f 2 | cut -d' ' -f 3`"
    fi

    if [ x$DRIVER = "xorinoco" ]
    then
        CHIPSET="Hermes/Prism"
    fi
    
    if [ x$DRIVER = "xath9k_htc" -o x$DRIVER = "xusb" ]
    then
        CHIPSET="AR9001/9002/9271"
    fi
    
    if [ x$DRIVER = "xwl12xx" ]
    then
            CHIPSET="TI WL1251/WL1271"
            IS_WL1251="`dmesg| grep firmware | grep wl1251 | wc -l`"
            IS_WL1271="`dmesg| grep firmware | grep wl1271 | wc -l`"

            if [ $IS_WL1251 != "0" ] && [ $IS_WL1271 = "0" ]
            then
                CHIPSET="TI WL1251"
            fi
            if [ $IS_WL1271 != "0" ] && [ $IS_WL1251 = "0" ]
            then
                CHIPSET="TI WL1271"
            fi
            # In any other case, we can't determine the chipset and thus give the generic: 1251/1271
    fi
    
    
    if [ x$DRIVER = "xr871x_usb_drv" ]
    then
            CHIPSET="Realtek 81XX"
    fi
    
    if [ x$DRIVER = "xcarl9170" ]
    then
            getPhy $2
            CHIPSET=`dmesg | grep usb | grep $PHYDEV | awk -F\  '{ print $3 " " $4 }'`
	    if [ `echo $CHIPSET | grep -i atheros | wc -l` -eq 0 ]
	    then
		CHIPSET=`dmesg | grep usb | grep $PHYDEV | awk -F\  '{ print $5 " " $6 }'`
	    fi
    fi
}

getPhy() {
    PHYDEV=""
    if [ x"$1" = "x" ]
    then
        return
    fi

    if [ x$MAC80211 = "x" ]
    then
        return
    fi

    if [ -d /sys/class/net/$1/phy80211/ ]
    then
	PHYDEV="`ls -l "/sys/class/net/$1/phy80211" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/'`"
    fi
}

getNewMon() {
    i=0

    while [ -d /sys/class/net/$MON_PREFIX$i/ ]
    do
        i=$(($i+1))
    done

    MONDEV="$MON_PREFIX$i"
}

if [ x"`which id 2> /dev/null`" != "x" ]
then
	USERID="`id -u 2> /dev/null`"
fi

if [ x$USERID = "x" -a x$UID != "x" ]
then
	USERID=$UID
fi

if [ x$USERID != "x" -a x$USERID != "x0" ]
then
	echo Run it as root ; exit ;
fi

iwpriv > /dev/null 2> /dev/null ||
  { echo Wireless tools not found ; exit ; }

if [ x"$1" = "xcheck" ] || [ x"$1" = "xstart" ]
then
    scanProcesses
    for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/' | grep -v wifi`
    do
#         getModule $iface
#         getDriver $iface
        checkProcessesIface $iface
    done

    if [ x"$2" = "xkill" ]
    then
        scanProcesses "$2"
    fi
    if [ x"$1" = "xcheck" ]
    then
        exit
    fi
fi

printf "\n\n"

if [ $# -ne "0" ]
then
    if [ x$1 != "xstart" ] && [ x$1 != "xstop" ]
    then
        usage
    fi

    if [ x$2 = "x" ]
    then
        usage
    fi
fi

SYSFS=0
if [ -d /sys/ ]
then
    SYSFS=1
fi

printf "Interface\tChipset\t\tDriver\n\n"


for iface in `ifconfig -a 2>/dev/null | egrep UNSPEC | sed 's/^\([a-zA-Z0-9_]*\) .*/\1/'`
do

 if [ x"`iwpriv $iface 2>/dev/null | grep ipwraw-ng`" != "x" ]
 then
        printf "$iface\t\tIntel 3945ABG\tipwraw-ng"
        if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
        then
                cp $KISMET~ $KISMET 2>/dev/null &&
                echo "source=ipw3945,$iface,Centrino_abg" >>$KISMET
                startStdIface $iface $CH
                iwconfig $iface rate 1M 2> /dev/null >/dev/null
                iwconfig $iface txpower 16 2> /dev/null >/dev/null
        fi
        if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
        then
                stopStdIface $iface
                iwconfig $iface txpower 15 2> /dev/null >/dev/null
                iwconfig $iface rate 54M 2> /dev/null >/dev/null
        fi
        echo
        continue
 fi

 if [ -e "/proc/sys/dev/$iface/fftxqmin" ]
 then
    MADWIFI=1
    ifconfig $iface up
    printf "$iface\t\tAtheros\t\tmadwifi-ng"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        IFACE=`wlanconfig ath create wlandev $iface wlanmode monitor -bssid | grep ath`
        cp $KISMET~ $KISMET 2>/dev/null &&
        echo "source=madwifi_g,$iface,Atheros" >>$KISMET
        ifconfig $iface up 2>/dev/null >/dev/null
        if [ $CH -lt 1000 ]
        then
            iwconfig $IFACE channel $CH 2>/dev/null >/dev/null
        else
            iwconfig $IFACE freq "$CH"000000 2>/dev/null >/dev/null
        fi
        ifconfig $IFACE up 2>/dev/null >/dev/null
        UDEV_ISSUE=$?
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
            echo "$iface does not support 'stop', do it on ath interface"
    fi
    echo
    continue
 fi
done

if [ $MADWIFI -eq 1 ]
then
	sleep 1s
fi

for iface in `iwconfig 2>/dev/null | egrep '(IEEE|ESSID|802\.11|WLAN)' | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/' | grep -v wifi`
do
 getModule  $iface
 getDriver  $iface
 getStack   $iface
 getChipset $DRIVER $iface


 if [ x$MAC80211 = "x1" ]
 then
    getPhy $iface
    getNewMon
    printf "$iface\t\t$CHIPSET\t$DRIVER - [$PHYDEV]"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        if [ $USE_IW = 1 ]
        then
            IW_ERROR=`iw dev $iface interface add $MONDEV type monitor 2>&1 | grep "nl80211 not found"`
            if [ x$IW_ERROR = "x" ]
            then
                sleep 1s
		if [ ! -z $3 ]
                then
            	    if [ $3 -lt 1000 ]
            	    then
                	iwconfig $MONDEV channel $3 >/dev/null 2>&1
            	    else
                	iwconfig $MONDEV freq "$3"000000 >/dev/null 2>&1
            	    fi
            	fi
                ifconfig $MONDEV up
                printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
            else
                if [ -f /sys/class/ieee80211/"$PHYDEV"/add_iface ]
                then
                    echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
                    sleep 1s
                    if [ $3 -lt 1000 ]
                    then
                        iwconfig $MONDEV mode Monitor channel $3 >/dev/null 2>&1
                    else
                        iwconfig $MONDEV mode Monitor freq "$3"000000 >/dev/null 2>&1
                    fi
                    ifconfig $MONDEV up
                    printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
                else
                    printf "\n\nERROR: nl80211 support is disabled in your kernel.\nPlease recompile your kernel with nl80211 support enabled.\n"
                fi
            fi
        else
            if [ -f /sys/class/ieee80211/"$PHYDEV"/add_iface ]
            then
                echo -n "$MONDEV" > /sys/class/ieee80211/"$PHYDEV"/add_iface
                sleep 1s
                if [ $3 -lt 1000 ]
                then
                    iwconfig $MONDEV mode Monitor channel $3 >/dev/null 2>&1
                else
                    iwconfig $MONDEV mode Monitor freq "$3"000000 >/dev/null 2>&1
                fi
                ifconfig $MONDEV up
                printf "\n\t\t\t\t(monitor mode enabled on $MONDEV)"
            else
                printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
            fi
        fi
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        z="`echo $iface | cut -b -${#MON_PREFIX}`"
        if [ x$z = "x$MON_PREFIX" ]
        then
            if [ $USE_IW = 1 ]
            then
                IW_ERROR=`iw dev "$iface" interface del 2>&1 | grep "nl80211 not found"`
                if [ x$IW_ERROR = "x" ]
                then
                    printf " (removed)"
                else
                    if [ -f /sys/class/ieee80211/"$PHYDEV"/remove_iface ]
                    then
                        echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
                        printf " (removed)"
                    else
                        printf "\n\nERROR: nl80211 support is disabled in your kernel.\nPlease recompile your kernel with nl80211 support enabled.\n"
                fi
                fi
            else
                if [ -f /sys/class/ieee80211/"$PHYDEV"/remove_iface ]
                then
                    echo -n "$iface" > /sys/class/ieee80211/"$PHYDEV"/remove_iface
                    printf " (removed)"
                else
                    printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
                fi
	    fi
        else
            ifconfig $iface down
            iwconfig $iface mode managed
            printf "\n\t\t\t\t(monitor mode disabled)"
        fi
    fi
    echo
    continue
 fi


 if [ x$DRIVER = "xorinoco" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_rid`" != "x" ] || [ x"`iwpriv $iface 2>/dev/null | grep dump_recs`" != "x" ]
 then
    printf "$iface\t\tHermesI\t\torinoco"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        cp $KISMET~ $KISMET 2>/dev/null &&
        echo "source=orinoco,$iface,HermesI" >>$KISMET
        if [ $CH -lt 1000 ]
        then
            iwconfig $iface mode Monitor channel $CH >/dev/null 2>&1
        else
            iwconfig $iface mode Monitor freq "$CH"000000 >/dev/null 2>&1
        fi
        iwpriv $iface monitor 1 $CH >/dev/null 2>&1
        ifconfig $iface up
        printf " (monitor mode enabled)"
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        ifconfig $iface down
        iwpriv $iface monitor 0 >/dev/null 2>&1
        iwconfig $iface mode Managed >/dev/null 2>&1
        printf " (monitor mode disabled)"
    fi
    echo
    continue
 fi

 if [ x$DRIVER = "xrtl819xU" ]
 then
 	printf "$iface\t\tRealtek 819x\trtl819xU"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        startStdIface $iface $CH
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        stopStdIface $iface
    fi
    echo
    continue
 fi

 if [ x$DRIVER = "xipw2100" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_crc_check`" != "x" ]
 then
    printf "$iface\t\tIntel 2100B\tipw2100"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
        cp $KISMET~ $KISMET 2>/dev/null &&
        echo "source=ipw2100,$iface,Centrino_b" >>$KISMET
        startStdIface $iface $CH
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
        stopStdIface $iface
    fi
    echo
    continue
 fi


 if [ x$DRIVER = "xarusb_lnx" ] || [ x$DRIVER = "Otus" ]
 then
    printf "$iface\t\tAR9001USB\tOtus"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
	echo "Monitor mode not yet supported"
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then
	stopStdIface $iface
    fi
    echo
    continue
 fi  

 if [ x$DRIVER = "xWiLink" ]
 then
    getChipset $iface
    printf "$iface\t\t${CHIPSET}\t\t${DRIVER}"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then 
        printf "\n\t\t\t\tMonitor mode not yet supported"
    fi  
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
    then 
        stopStdIface $iface
    fi  
    echo
    continue
 fi

 if [ x$DRIVER = "xipw2200" ] || [ x"`iwpriv $iface 2>/dev/null | grep sw_reset`" != "x" ]
 then
    MODINFO=`modinfo ipw2200  2>/dev/null | awk '/^version/ {print $2}'`
    if { echo "$MODINFO" | grep -E '^1\.0\.(0|1|2|3)$' ; }
    then
    	echo "Monitor mode not supported, please upgrade"
    else
	printf "$iface\t\tIntel 2200BG\tipw2200"
	if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
	then
	    cp $KISMET~ $KISMET 2>/dev/null &&
	    echo "source=ipw2200,$iface,Centrino_g" >>$KISMET
	    startStdIface $iface $CH
	fi
	if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
	then
	    stopStdIface $iface
	fi

    	if { echo "$MODINFO" | grep -E '^1\.0\.(5|7|8|11)$' ; }
	then
		printf " (Warning: bad module version, you should upgrade)"
	fi
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xcx3110x" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_backscan`" != "x" ]
 then
     printf "$iface\t\tNokia 770\t\tcx3110x"
     if [ x$1 = "xstart" ] || [ x$1 = "xstop" ]
     then
     	printf " (Enable/disable monitor mode not yet supported)"
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xipw3945" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_preamble | grep -v set_crc_check`" != "x" ]
  then
        printf "$iface\t\tIntel 3945ABG\tipw3945"
        if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
         then
                cp $KISMET~ $KISMET 2>/dev/null &&
                echo "source=ipw3945,$iface,Centrino_g" >>$KISMET
                startStdIface $iface $CH
        fi
        if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
         then
                stopStdIface $iface
        fi
        echo
        continue
 fi


 if [ x"`iwpriv $iface 2>/dev/null | grep inact_auth`" != "x" ]
 then
     if [ -e "/proc/sys/net/$iface/%parent" ]
     then
        printf "$iface\t\tAtheros\t\tmadwifi-ng VAP (parent: `cat /proc/sys/net/$iface/%parent`)"
	if [ x$2 = x$iface ] && [ x$1 = "xstop" ]
	then
		wlanconfig $iface destroy
		printf " (VAP destroyed)"
	fi
	if [ x$1 = "xstart" ]
	then
		if [ $iface = "$IFACE" ]
		then
			printf " (monitor mode enabled)"
		fi
		if [ x$2 = x$iface ]
		then
			printf " (VAP cannot be put in monitor mode)"
		fi
	fi

	echo ""
        continue

     fi
     printf "$iface\t\tAtheros\t\tmadwifi"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=madwifi_g,$iface,Atheros" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xprism54" ] || [ x"`iwpriv $iface 2>/dev/null | grep getPolicy`" != "x" ]
 then
     printf "$iface\t\tPrismGT\t\tprism54"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=prism54g,$iface,Prism54" >>$KISMET
         ifconfig $iface up
         if [ $CH -lt 1000 ]
         then
             iwconfig $iface mode Monitor channel $CH
         else
             iwconfig $iface mode Monitor freq "$CH"000000
         fi
         iwpriv $iface set_prismhdr 1 >/dev/null 2>&1
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xhostap" ] || [ x"`iwpriv $iface 2>/dev/null | grep antsel_rx`" != "x" ]
 then
     printf "$iface\t\tPrism 2/2.5/3\tHostAP"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=hostap,$iface,Prism2" >>$KISMET
         if [ $CH -lt 1000 ]
         then
             iwconfig $iface mode Monitor channel $CH
         else
             iwconfig $iface mode Monitor freq "$CH"000000
         fi
         iwpriv $iface monitor_type 1 >/dev/null 2>&1
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xwlan-ng" ] || [ x"`wlancfg show $iface 2>/dev/null | grep p2CnfWEPFlags`" != "x" ]
 then
     printf "$iface\t\tPrism 2/2.5/3\twlan-ng"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=wlanng,$iface,Prism2" >>$KISMET
         wlanctl-ng $iface lnxreq_ifstate ifstate=enable >/dev/null
         wlanctl-ng $iface lnxreq_wlansniff enable=true channel=$CH \
                           prismheader=true wlanheader=false \
                           stripfcs=true keepwepflags=true >/dev/null
         echo p2CnfWEPFlags=0,4,7 | wlancfg set $iface
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         ifconfig $iface down
         wlanctl-ng $iface lnxreq_wlansniff enable=false  >/dev/null
         wlanctl-ng $iface lnxreq_ifstate ifstate=disable >/dev/null
         printf " (monitor mode disabled)"
     fi
     echo
     continue
 fi


 if [ x$SYSFS = "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" != "x" ]
 then
    if [ x"`iwconfig $iface | grep ESSID | awk -F\  '{ print $2}' | grep -i rt61`" != "x" ]
    then
    	printf "$iface\t\tRalink 2561 PCI\trt61"
    fi

    if [ x"`iwconfig $iface | grep ESSID | awk -F\  '{ print $2}' | grep -i rt73`" != "x" ]
    then
        printf "$iface\t\tRalink 2573 USB\trt73"
    fi

    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
         iwpriv $iface rfmontx 1
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
         then
             iwpriv $iface forceprismheader 1
         fi
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
         then
             iwpriv $iface forceprism 1
         fi
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
     	stopStdIface $iface
    fi
    echo
    continue

 fi


 if [ x$DRIVER = "xrt61" ]
 then
    printf "$iface\t\tRalink 2561 PCI\trt61"

    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
         iwpriv $iface rfmontx 1
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
         then
             iwpriv $iface forceprismheader 1
         fi
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
         then
             iwpriv $iface forceprism 1
         fi
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
     	stopStdIface $iface
    fi    
    echo
    continue

 fi


 if [ x$DRIVER = "xrt73" ]
 then
    printf "$iface\t\tRalink 2573 USB\trt73"

    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
         iwpriv $iface rfmontx 1
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
         then
             iwpriv $iface forceprismheader 1
         fi
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
         then
             iwpriv $iface forceprism 1
         fi
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
     	stopStdIface $iface
    fi    
    echo
    continue

 fi


 if [ x$DRIVER = "xrt2500" ] || [ x"`iwpriv $iface 2>/dev/null | grep bbp`" != "x" ]
 then
     printf "$iface\t\tRalink 2560 PCI\trt2500"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt2500,$iface,Ralink_g" >>$KISMET
         iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xrt2570" ] || [ x"`iwpriv $iface 2>/dev/null | grep wpapsk`" != "x" ] && [ x"`iwpriv $iface 2>/dev/null | grep get_RaAP_Cfg`" = "x" ]
 then
     printf "$iface\t\tRalink 2570 USB\trt2570"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt2500,$iface,Ralink_g" >>$KISMET
         iwconfig $iface mode ad-hoc 2> /dev/null >/dev/null
         startStdIface $iface $CH
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprismheader`" != "x" ]
         then
             iwpriv $iface forceprismheader 1
         fi
         if [ x"`iwpriv $iface 2>/dev/null | grep forceprism`" != "x" ]
         then
             iwpriv $iface forceprism 1
         fi
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xr8180" ] || [ x"`iwpriv $iface 2>/dev/null | grep debugtx`" != "x" ]
 then
     printf "$iface\t\tRTL8180/RTL8185\tr8180"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt8180,$iface,Realtek" >>$KISMET
         if [ $CH -lt 1000 ]
         then
             iwconfig $iface mode Monitor channel $CH
         else
             iwconfig $iface mode Monitor freq "$CH"000000
         fi
         if [ x"`iwpriv $iface 2>/dev/null | grep prismhdr`" != "x" ]
         then
            iwpriv $iface prismhdr 1 >/dev/null 2>&1
         fi
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xr8187" ] || [ x"`iwpriv $iface 2>/dev/null | grep badcrc`" != "x" ]
 then
     printf "$iface\t\tRTL8187\t\tr8187"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=rt8180,$iface,Realtek" >>$KISMET
         if [ $CH -lt 1000 ]
         then
             iwconfig $iface mode Monitor channel $CH
         else
             iwconfig $iface mode Monitor freq "$CH"000000
         fi
         if [ x"`iwpriv $iface 2>/dev/null | grep rawtx`" != "x" ]
         then
             iwpriv $iface rawtx 1 >/dev/null 2>&1
         fi
         ifconfig $iface up
         printf " (monitor mode enabled)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xzd1211rw" ] || [ x"`iwpriv $iface 2>/dev/null | grep get_regdomain`" != "x" ]
 then
     printf "$iface\t\tZyDAS 1211\tzd1211rw"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=zd1211,$iface,ZyDAS" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xzd1211" ] || [ x"`iwpriv $iface 2>/dev/null | grep dbg_flag`" != "x" ]
 then
     printf "$iface\t\tZyDAS 1211\tzd1211"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=zd1211,$iface,ZyDAS" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xacx" ] || [ x"`iwpriv $iface 2>/dev/null | grep GetAcx1`" != "x" ]
 then
     printf "$iface\t\tTI ACX1xx\tacx"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=acx100,$iface,TI" >>$KISMET
         iwpriv $iface monitor 2 $CH 2> /dev/null >/dev/null
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xbcm43xx" ] || [ x"`iwpriv $iface 2>/dev/null | grep write_sprom`" != "x" ]
 then
     printf "$iface\t\tBroadcom\tbcm43xx"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         cp $KISMET~ $KISMET 2>/dev/null &&
         echo "source=bcm43xx,$iface,broadcom" >>$KISMET
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
         ifconfig $iface up
     fi
     echo
     continue
 fi


 if [ x$DRIVER = "xislsm" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
 then
    printf "$iface\t\tPrismGT\t\tislsm"
    if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
    then
         startStdIface $iface $CH
    fi
    if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
     	stopStdIface $iface
    fi    
    echo
    continue

 fi


 if [ x$DRIVER = "xat76c503a" ] || [ x"`iwpriv $iface 2>/dev/null | grep set_announcedpkt`" != "x" ]
  then
     printf "$iface\t\tAtmel\t\tat76c503a"
     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
          startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
      then
      	 stopStdIface $iface
     fi     
     echo
     continue

 fi


 if [ x$DRIVER = "xndiswrapper" ] || [ x"`iwpriv $iface 2>/dev/null | grep ndis_reset`" != "x" ]
 then
     printf "$iface\t\tUnknown\t\tndiswrapper"
     if [ x$2 = x$iface ]
     then
         echo " (MONITOR MODE NOT SUPPORTED)"
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi


 if [ x$DRIVER != "x" ]
 then
     if [ x$CHIPSET = "x" ]
     then
         printf "$iface\t\tUNKNOWN\t\t$DRIVER"
     else
         printf "$iface\t\t$CHIPSET\t\t$DRIVER"
     fi

     if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
     then
         startStdIface $iface $CH
     fi
     if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
     then
         stopStdIface $iface
     fi
     echo
     continue
 fi

printf "$iface\t\tUnknown\t\tUnknown (MONITOR MODE NOT SUPPORTED)\n"

done

echo

if [ $UDEV_ISSUE != 0 ] ; then
	echo udev renamed the interface. Read the following for a solution:
	echo http://www.aircrack-ng.org/doku.php?id=airmon-ng#interface_athx_number_rising_ath0_ath1_ath2...._ath45
	echo 
fi