* Fixed some spelling
24 KiB
Adding a new lint
You are probably here because you want to add a new lint to Clippy. If this is the first time you're contributing to Clippy, this document guides you through creating an example lint from scratch.
To get started, we will create a lint that detects functions called foo
,
because that's clearly a non-descriptive name.
Setup
See the Basics documentation.
Getting Started
There is a bit of boilerplate code that needs to be set up when creating a new
lint. Fortunately, you can use the clippy dev tools to handle this for you. We
are naming our new lint foo_functions
(lints are generally written in snake
case), and we don't need type information so it will have an early pass type
(more on this later on). If you're not sure if the name you chose fits the lint,
take a look at our lint naming guidelines. To get started on this
lint you can run cargo dev new_lint --name=foo_functions --pass=early --category=pedantic
(category will default to nursery if not provided). This
command will create two files: tests/ui/foo_functions.rs
and
clippy_lints/src/foo_functions.rs
, as well as run cargo dev update_lints
to
register the new lint. For cargo lints, two project hierarchies (fail/pass) will
be created by default under tests/ui-cargo
.
Next, we'll open up these files and add our lint!
Testing
Let's write some tests first that we can execute while we iterate on our lint.
Clippy uses UI tests for testing. UI tests check that the output of Clippy is
exactly as expected. Each test is just a plain Rust file that contains the code
we want to check. The output of Clippy is compared against a .stderr
file.
Note that you don't have to create this file yourself, we'll get to
generating the .stderr
files further down.
We start by opening the test file created at tests/ui/foo_functions.rs
.
Update the file with some examples to get started:
#![warn(clippy::foo_functions)]
// Impl methods
struct A;
impl A {
pub fn fo(&self) {}
pub fn foo(&self) {}
pub fn food(&self) {}
}
// Default trait methods
trait B {
fn fo(&self) {}
fn foo(&self) {}
fn food(&self) {}
}
// Plain functions
fn fo() {}
fn foo() {}
fn food() {}
fn main() {
// We also don't want to lint method calls
foo();
let a = A;
a.foo();
}
Now we can run the test with TESTNAME=foo_functions cargo uitest
,
currently this test is meaningless though.
While we are working on implementing our lint, we can keep running the UI test. That allows us to check if the output is turning into what we want.
Once we are satisfied with the output, we need to run
cargo dev bless
to update the .stderr
file for our lint.
Please note that, we should run TESTNAME=foo_functions cargo uitest
every time before running cargo dev bless
.
Running TESTNAME=foo_functions cargo uitest
should pass then. When we commit
our lint, we need to commit the generated .stderr
files, too. In general, you
should only commit files changed by cargo dev bless
for the
specific lint you are creating/editing. Note that if the generated files are
empty, they should be removed.
Cargo lints
For cargo lints, the process of testing differs in that we are interested in
the Cargo.toml
manifest file. We also need a minimal crate associated
with that manifest.
If our new lint is named e.g. foo_categories
, after running cargo dev new_lint
we will find by default two new crates, each with its manifest file:
tests/ui-cargo/foo_categories/fail/Cargo.toml
: this file should cause the new lint to raise an error.tests/ui-cargo/foo_categories/pass/Cargo.toml
: this file should not trigger the lint.
If you need more cases, you can copy one of those crates (under foo_categories
) and rename it.
The process of generating the .stderr
file is the same, and prepending the TESTNAME
variable to cargo uitest
works too.
Rustfix tests
If the lint you are working on is making use of structured suggestions, the
test file should include a // run-rustfix
comment at the top. This will
additionally run rustfix for that test. Rustfix will apply the suggestions
from the lint to the code of the test file and compare that to the contents of
a .fixed
file.
Use cargo dev bless
to automatically generate the
.fixed
file after running the tests.
Edition 2018 tests
Some features require the 2018 edition to work (e.g. async_await
), but
compile-test tests run on the 2015 edition by default. To change this behavior
add // edition:2018
at the top of the test file (note that it's space-sensitive).
Testing manually
Manually testing against an example file can be useful if you have added some
println!
s and the test suite output becomes unreadable. To try Clippy with
your local modifications, run
env __CLIPPY_INTERNAL_TESTS=true cargo run --bin clippy-driver -- -L ./target/debug input.rs
from the working copy root. With tests in place, let's have a look at implementing our lint now.
Lint declaration
Let's start by opening the new file created in the clippy_lints
crate
at clippy_lints/src/foo_functions.rs
. That's the crate where all the
lint code is. This file has already imported some initial things we will need:
use rustc_lint::{EarlyLintPass, EarlyContext};
use rustc_session::{declare_lint_pass, declare_tool_lint};
use rustc_ast::ast::*;
The next step is to update the lint declaration. Lints are declared using the
declare_clippy_lint!
macro, and we just need to update
the auto-generated lint declaration to have a real description, something like this:
declare_clippy_lint! {
/// **What it does:**
///
/// **Why is this bad?**
///
/// **Known problems:** None.
///
/// **Example:**
///
/// ```rust
/// // example code
/// ```
pub FOO_FUNCTIONS,
pedantic,
"function named `foo`, which is not a descriptive name"
}
- The section of lines prefixed with
///
constitutes the lint documentation section. This is the default documentation style and will be displayed like this. To render and open this documentation locally in a browser, runcargo dev serve
. FOO_FUNCTIONS
is the name of our lint. Be sure to follow the lint naming guidelines here when naming your lint. In short, the name should state the thing that is being checked for and read well when used withallow
/warn
/deny
.pedantic
sets the lint level toAllow
. The exact mapping can be found here- The last part should be a text that explains what exactly is wrong with the code
The rest of this file contains an empty implementation for our lint pass,
which in this case is EarlyLintPass
and should look like this:
// clippy_lints/src/foo_functions.rs
// .. imports and lint declaration ..
declare_lint_pass!(FooFunctions => [FOO_FUNCTIONS]);
impl EarlyLintPass for FooFunctions {}
Normally after declaring the lint, we have to run cargo dev update_lints
,
which updates some files, so Clippy knows about the new lint. Since we used
cargo dev new_lint ...
to generate the lint declaration, this was done
automatically. While update_lints
automates most of the things, it doesn't
automate everything. We will have to register our lint pass manually in the
register_plugins
function in clippy_lints/src/lib.rs
:
store.register_early_pass(|| box foo_functions::FooFunctions);
As one may expect, there is a corresponding register_late_pass
method
available as well. Without a call to one of register_early_pass
or
register_late_pass
, the lint pass in question will not be run.
One reason that cargo dev
does not automate this step is that multiple lints
can use the same lint pass, so registering the lint pass may already be done
when adding a new lint. Another reason that this step is not automated is that
the order that the passes are registered determines the order the passes
actually run, which in turn affects the order that any emitted lints are output
in.
Lint passes
Writing a lint that only checks for the name of a function means that we only have to deal with the AST and don't have to deal with the type system at all. This is good, because it makes writing this particular lint less complicated.
We have to make this decision with every new Clippy lint. It boils down to using
either EarlyLintPass
or LateLintPass
.
In short, the LateLintPass
has access to type information while the
EarlyLintPass
doesn't. If you don't need access to type information, use the
EarlyLintPass
. The EarlyLintPass
is also faster. However linting speed
hasn't really been a concern with Clippy so far.
Since we don't need type information for checking the function name, we used
--pass=early
when running the new lint automation and all the imports were
added accordingly.
Emitting a lint
With UI tests and the lint declaration in place, we can start working on the implementation of the lint logic.
Let's start by implementing the EarlyLintPass
for our FooFunctions
:
impl EarlyLintPass for FooFunctions {
fn check_fn(&mut self, cx: &EarlyContext<'_>, fn_kind: FnKind<'_>, span: Span, _: NodeId) {
// TODO: Emit lint here
}
}
We implement the check_fn
method from the
EarlyLintPass
trait. This gives us access to various
information about the function that is currently being checked. More on that in
the next section. Let's worry about the details later and emit our lint for
every function definition first.
Depending on how complex we want our lint message to be, we can choose from a
variety of lint emission functions. They can all be found in
clippy_lints/src/utils/diagnostics.rs
.
span_lint_and_help
seems most appropriate in this case. It allows us to
provide an extra help message and we can't really suggest a better name
automatically. This is how it looks:
impl EarlyLintPass for FooFunctions {
fn check_fn(&mut self, cx: &EarlyContext<'_>, fn_kind: FnKind<'_>, span: Span, _: NodeId) {
span_lint_and_help(
cx,
FOO_FUNCTIONS,
span,
"function named `foo`",
None,
"consider using a more meaningful name"
);
}
}
Running our UI test should now produce output that contains the lint message.
According to the rustc-dev-guide, the text should be matter of fact and avoid capitalization and periods, unless multiple sentences are needed. When code or an identifier must appear in a message or label, it should be surrounded with single grave accents `.
Adding the lint logic
Writing the logic for your lint will most likely be different from our example, so this section is kept rather short.
Using the check_fn
method gives us access to FnKind
that has the FnKind::Fn
variant. It provides access to the name of the
function/method via an Ident
.
With that we can expand our check_fn
method to:
impl EarlyLintPass for FooFunctions {
fn check_fn(&mut self, cx: &EarlyContext<'_>, fn_kind: FnKind<'_>, span: Span, _: NodeId) {
if is_foo_fn(fn_kind) {
span_lint_and_help(
cx,
FOO_FUNCTIONS,
span,
"function named `foo`",
None,
"consider using a more meaningful name"
);
}
}
}
We separate the lint conditional from the lint emissions because it makes the code a bit easier to read. In some cases this separation would also allow to write some unit tests (as opposed to only UI tests) for the separate function.
In our example, is_foo_fn
looks like:
// use statements, impl EarlyLintPass, check_fn, ..
fn is_foo_fn(fn_kind: FnKind<'_>) -> bool {
match fn_kind {
FnKind::Fn(_, ident, ..) => {
// check if `fn` name is `foo`
ident.name.as_str() == "foo"
}
// ignore closures
FnKind::Closure(..) => false
}
}
Now we should also run the full test suite with cargo test
. At this point
running cargo test
should produce the expected output. Remember to run
cargo dev bless
to update the .stderr
file.
cargo test
(as opposed to cargo uitest
) will also ensure that our lint
implementation is not violating any Clippy lints itself.
That should be it for the lint implementation. Running cargo test
should now
pass.
Specifying the lint's minimum supported Rust version (msrv)
Projects supporting older versions of Rust would need to disable a lint if it targets features present in later versions. Support for this can be added by specifying an msrv in your lint like so,
const MANUAL_STRIP_MSRV: RustcVersion = RustcVersion::new(1, 45, 0);
The project's msrv will also have to be an attribute in the lint so you'll have to add a struct
and constructor for your lint. The project's msrv needs to be passed when the lint is registered
in lib.rs
pub struct ManualStrip {
msrv: Option<RustcVersion>,
}
impl ManualStrip {
#[must_use]
pub fn new(msrv: Option<RustcVersion>) -> Self {
Self { msrv }
}
}
The project's msrv can then be matched against the lint's msrv in the LintPass using the meets_msrv
utility
function.
if !meets_msrv(self.msrv.as_ref(), &MANUAL_STRIP_MSRV) {
return;
}
The project's msrv can also be specified as an inner attribute, which overrides the value from
clippy.toml
. This can be accounted for using the extract_msrv_attr!(LintContext)
macro and passing
LateContext/EarlyContext.
impl<'tcx> LateLintPass<'tcx> for ManualStrip {
fn check_expr(&mut self, cx: &LateContext<'tcx>, expr: &'tcx Expr<'_>) {
...
}
extract_msrv_attr!(LateContext);
}
Once the msrv is added to the lint, a relevant test case should be added to tests/ui/min_rust_version_attr.rs
which verifies that the lint isn't emitted if the project's msrv is lower.
Author lint
If you have trouble implementing your lint, there is also the internal author
lint to generate Clippy code that detects the offending pattern. It does not
work for all of the Rust syntax, but can give a good starting point.
The quickest way to use it, is the
Rust playground: play.rust-lang.org.
Put the code you want to lint into the editor and add the #[clippy::author]
attribute above the item. Then run Clippy via Tools -> Clippy
and you should
see the generated code in the output below.
Here is an example on the playground.
If the command was executed successfully, you can copy the code over to where you are implementing your lint.
Documentation
The final thing before submitting our PR is to add some documentation to our lint declaration.
Please document your lint with a doc comment akin to the following:
declare_clippy_lint! {
/// **What it does:** Checks for ... (describe what the lint matches).
///
/// **Why is this bad?** Supply the reason for linting the code.
///
/// **Known problems:** None. (Or describe where it could go wrong.)
///
/// **Example:**
///
/// ```rust,ignore
/// // Bad
/// Insert a short example of code that triggers the lint
///
/// // Good
/// Insert a short example of improved code that doesn't trigger the lint
/// ```
pub FOO_FUNCTIONS,
pedantic,
"function named `foo`, which is not a descriptive name"
}
Once your lint is merged, this documentation will show up in the lint list.
Running rustfmt
Rustfmt is a tool for formatting Rust code according to style guidelines.
Your code has to be formatted by rustfmt
before a PR can be merged.
Clippy uses nightly rustfmt
in the CI.
It can be installed via rustup
:
rustup component add rustfmt --toolchain=nightly
Use cargo dev fmt
to format the whole codebase. Make sure that rustfmt
is
installed for the nightly toolchain.
Debugging
If you want to debug parts of your lint implementation, you can use the dbg!
macro anywhere in your code. Running the tests should then include the debug
output in the stdout
part.
PR Checklist
Before submitting your PR make sure you followed all of the basic requirements:
- [ ] Followed lint naming conventions
- [ ] Added passing UI tests (including committed
.stderr
file) - [ ]
cargo test
passes locally - [ ] Executed
cargo dev update_lints
- [ ] Added lint documentation
- [ ] Run
cargo dev fmt
Adding configuration to a lint
Clippy supports the configuration of lints values using a clippy.toml
file in the workspace
directory. Adding a configuration to a lint can be useful for thresholds or to constrain some
behavior that can be seen as a false positive for some users. Adding a configuration is done
in the following steps:
-
Adding a new configuration entry to clippy_lints::utils::conf like this:
/// Lint: LINT_NAME. <The configuration field doc comment> (configuration_ident, "configuration_value": Type, DefaultValue),
The configuration value and identifier should usually be the same. The doc comment will be automatically added to the lint documentation.
-
Adding the configuration value to the lint impl struct:
-
This first requires the definition of a lint impl struct. Lint impl structs are usually generated with the
declare_lint_pass!
macro. This struct needs to be defined manually to add some kind of metadata to it:// Generated struct definition declare_lint_pass!(StructName => [ LINT_NAME ]); // New manual definition struct #[derive(Copy, Clone)] pub struct StructName {} impl_lint_pass!(StructName => [ LINT_NAME ]);
-
Next add the configuration value and a corresponding creation method like this:
#[derive(Copy, Clone)] pub struct StructName { configuration_ident: Type, } // ... impl StructName { pub fn new(configuration_ident: Type) -> Self { Self { configuration_ident, } } }
-
-
Passing the configuration value to the lint impl struct:
First find the struct construction in the clippy_lints lib file. Make sure that
clippy dev update_lints
added it beforehand. The configuration value is now cloned or copied into a local value that is then passed to the impl struct like this:// Default generated registration: store.register_late_pass(|| box module::StructName); // New registration with configuration value let configuration_ident = conf.configuration_ident.clone(); store.register_late_pass(move || box module::StructName::new(configuration_ident));
Congratulations the work is almost done. The configuration value can now be accessed in the linting code via
self.configuration_ident
. -
Adding tests:
- The default configured value can be tested like any normal lint in
tests/ui
. - The configuration itself will be tested separately in
tests/ui-toml
. Simply add a new subfolder with a fitting name. This folder contains aclippy.toml
file with the configuration value and a rust file that should be linted by clippy. The test can otherwise be written as usual.
- The default configured value can be tested like any normal lint in
Cheatsheet
Here are some pointers to things you are likely going to need for every lint:
- Clippy utils - Various helper functions. Maybe the function you need
is already in here (
implements_trait
,match_path
,snippet
, etc) - Clippy diagnostics
- The
if_chain
macro from_expansion
andin_external_macro
Span
Applicability
- Common tools for writing lints helps with common operations
- The rustc-dev-guide explains a lot of internal compiler concepts
- The nightly rustc docs which has been linked to throughout this guide
For EarlyLintPass
lints:
For LateLintPass
lints:
While most of Clippy's lint utils are documented, most of rustc's internals lack documentation currently. This is unfortunate, but in most cases you can probably get away with copying things from existing similar lints. If you are stuck, don't hesitate to ask on Zulip or in the issue/PR.