Partially outline code inside the panic! macro
This outlines code inside the panic! macro in some cases. This is split out from https://github.com/rust-lang/rust/pull/115562 to exclude changes to rustc.
move required_consts check to general post-mono-check function
This factors some code that is common between the interpreter and the codegen backends into shared helper functions. Also as a side-effect the interpreter now uses the same `eval` functions as everyone else to get the evaluated MIR constants.
Also this is in preparation for another post-mono check that will be needed for (the current hackfix for) https://github.com/rust-lang/rust/issues/115709: ensuring that all locals are dynamically sized.
I didn't expect this to change diagnostics, but it's just cycle errors that change.
r? `@oli-obk`
Also stabilizes saturating_int_assign_impl, gh-92354.
And also make pub fns const where the underlying saturating_*
fns became const in the meantime since the Saturating type was
created.
Correctly handle async blocks for NEEDLESS_PASS_BY_REF_MUT
Fixes https://github.com/rust-lang/rust-clippy/issues/11299.
The problem was that the `async block`s are popping a closure which we didn't go into, making it miss the mutable access to the variables.
cc `@Centri3`
changelog: none
[`useless_conversion`]: only lint on paths to fn items and fix FP in macro
Fixes#11065 (which is actually two issues: an ICE and a false positive)
It now makes sure that the function call path points to a function-like item (and not e.g. a `const` like in the linked issue), so that calling `TyCtxt::fn_sig` later in the lint does not ICE (fixes https://github.com/rust-lang/rust-clippy/issues/11065#issuecomment-1616836099).
It *also* makes sure that the expression is not part of a macro call (fixes https://github.com/rust-lang/rust-clippy/issues/11065#issuecomment-1616919639). ~~I'm not sure if there's a better way to check this other than to walk the parent expr chain and see if any of them are expansions.~~ (edit: it doesn't do this anymore)
changelog: [`useless_conversion`]: fix ICE when call receiver is a non-fn item
changelog: [`useless_conversion`]: don't lint if argument is a macro argument (fixes a FP)
r? `@llogiq` (reviewed #10814, which introduced these issues)
Rename and allow `cast_ref_to_mut` lint
This PR is a small subset of https://github.com/rust-lang/rust/pull/112431, that is the renaming of the lint (`cast_ref_to_mut` -> `invalid_reference_casting`).
BUT also temporarily change the default level of the lint from deny-by-default to allow-by-default until https://github.com/rust-lang/rust/pull/112431 is merged.
r? `@Nilstrieb`
Uplift `clippy::fn_null_check` lint
This PR aims at uplifting the `clippy::fn_null_check` lint into rustc.
## `incorrect_fn_null_checks`
(warn-by-default)
The `incorrect_fn_null_checks` lint checks for expression that checks if a function pointer is null.
### Example
```rust
let fn_ptr: fn() = /* somehow obtained nullable function pointer */
if (fn_ptr as *const ()).is_null() { /* ... */ }
```
### Explanation
Function pointers are assumed to be non-null, checking for their nullity is incorrect.
-----
Mostly followed the instructions for uplifting a clippy lint described here: https://github.com/rust-lang/rust/pull/99696#pullrequestreview-1134072751
`@rustbot` label: +I-lang-nominated
r? compiler
resolve: Pre-compute non-reexport module children
Instead of repeating the same logic by walking HIR during metadata encoding.
The only difference is that we are no longer encoding `macro_rules` items, but we never currently need them as a part of this list. They can be encoded separately if this need ever arises.
`module_reexports` is also un-querified, because I don't see any reasons to make it a query, only overhead.
Instead of repeating the same logic by walking HIR during metadata encoding.
The only difference is that we are no longer encoding `macro_rules` items, but we never currently need them as a part of this list.
They can be encoded separately if this need ever arises.
`module_reexports` is also un-querified, because I don't see any reasons to make it a query, only overhead.
Remove `identity_future` indirection
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]`annotation.
Fixes https://github.com/rust-lang/rust/issues/104826.
Remove `box_syntax`
r? `@Nilstrieb`
This removes the feature `box_syntax`, which allows the use of `box <expr>` to create a Box, and finalises removing use of the feature from the compiler. `box_patterns` (allowing the use of `box <pat>` in a pattern) is unaffected.
It also removes `ast::ExprKind::Box` - the only way to create a 'box' expression now is with the rustc-internal `#[rustc_box]` attribute.
As a temporary measure to help users move away, `box <expr>` now parses the inner expression, and emits a `MachineApplicable` lint to replace it with `Box::new`
Closes#49733
Strengthen state tracking in const-prop
Some/many of the changes are replicated between both the const-prop lint and the const-prop optimization.
Behaviour changes:
- const-prop opt does not give a span to propagated values. This was useless as that span's primary purpose is to diagnose evaluation failure in codegen.
- we remove the `OnlyPropagateInto` mode. It was only used for function arguments, which are better modeled by a write before entry.
- the tracking of assignments and discriminants make clearer that we do nothing in `NoPropagation` mode or on indirect places.
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]` annotation.
Render missing generics suggestion verbosely
It's a bit easier to read like this, especially ones that are appending new generics onto an existing list, like ": `, T`" which render somewhat poorly inline.
Also don't suggest `dyn` as a type parameter to add, even if technically that's valid in edition 2015.
rustc_ast_lowering: Stop lowering imports into multiple items
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
Previously, async constructs would be lowered to "normal" generators,
with an additional `from_generator` / `GenFuture` shim in between to
convert from `Generator` to `Future`.
The compiler will now special-case these generators internally so that
async constructs will *directly* implement `Future` without the need
to go through the `from_generator` / `GenFuture` shim.
The primary motivation for this change was hiding this implementation
detail in stack traces and debuginfo, but it can in theory also help
the optimizer as there is less abstractions to see through.
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
Uplift `clippy::for_loops_over_fallibles` lint into rustc
This PR, as the title suggests, uplifts [`clippy::for_loops_over_fallibles`] lint into rustc. This lint warns for code like this:
```rust
for _ in Some(1) {}
for _ in Ok::<_, ()>(1) {}
```
i.e. directly iterating over `Option` and `Result` using `for` loop.
There are a number of suggestions that this PR adds (on top of what clippy suggested):
1. If the argument (? is there a better name for that expression) of a `for` loop is a `.next()` call, then we can suggest removing it (or rather replacing with `.by_ref()` to allow iterator being used later)
```rust
for _ in iter.next() {}
// turns into
for _ in iter.by_ref() {}
```
2. (otherwise) We can suggest using `while let`, this is useful for non-iterator, iterator-like things like [async] channels
```rust
for _ in rx.recv() {}
// turns into
while let Some(_) = rx.recv() {}
```
3. If the argument type is `Result<impl IntoIterator, _>` and the body has a `Result<_, _>` type, we can suggest using `?`
```rust
for _ in f() {}
// turns into
for _ in f()? {}
```
4. To preserve the original behavior and clear intent, we can suggest using `if let`
```rust
for _ in f() {}
// turns into
if let Some(_) = f() {}
```
(P.S. `Some` and `Ok` are interchangeable depending on the type)
I still feel that the lint wording/look is somewhat off, so I'll be happy to hear suggestions (on how to improve suggestions :D)!
Resolves#99272
[`clippy::for_loops_over_fallibles`]: https://rust-lang.github.io/rust-clippy/master/index.html#for_loops_over_fallibles
Stabilize const `BTree{Map,Set}::new`
The FCP was completed in #71835.
Since `len` and `is_empty` are not const stable yet, this also creates a new feature for them since they previously used the same `const_btree_new` feature.
Since `len` and `is_empty` are not const stable yet, this also
creates a new feature for them since they previously used the same
`const_btree_new` feature.
`BindingAnnotation` refactor
* `ast::BindingMode` is deleted and replaced with `hir::BindingAnnotation` (which is moved to `ast`)
* `BindingAnnotation` is changed from an enum to a tuple struct e.g. `BindingAnnotation(ByRef::No, Mutability::Mut)`
* Associated constants added for convenience `BindingAnnotation::{NONE, REF, MUT, REF_MUT}`
One goal is to make it more clear that `BindingAnnotation` merely represents syntax `ref mut` and not the actual binding mode. This was especially confusing since we had `ast::BindingMode`->`hir::BindingAnnotation`->`thir::BindingMode`.
I wish there were more symmetry between `ByRef` and `Mutability` (variant) naming (maybe `Mutable::Yes`?), and I also don't love how long the name `BindingAnnotation` is, but this seems like the best compromise. Ideas welcome.
