Move `mutex_atomic` to `restriction`
By #4295, the general consensus seems to be that `mutex_atomic` is not a useful lint in most cases. If anything, it could be useful as a restriction on code that for whatever reason can't use atomics. Keeping it in `clippy::nursery` is harmful to people attempting to use clippy for soundness.
---
changelog: Moved [`mutex_atomic`] to `restriction`
[#10115](https://github.com/rust-lang/rust-clippy/pull/10115)
<!-- chnagelog_checked -->
Rollup of 9 pull requests
Successful merges:
- #104531 (Provide a better error and a suggestion for `Fn` traits with lifetime params)
- #105899 (`./x doc library --open` opens `std`)
- #106190 (Account for multiple multiline spans with empty padding)
- #106202 (Trim more paths in obligation types)
- #106234 (rustdoc: simplify settings, help, and copy button CSS by not reusing)
- #106236 (docs/test: add docs and a UI test for `E0514` and `E0519`)
- #106259 (Update Clippy)
- #106260 (Fix index out of bounds issues in rustdoc)
- #106263 (Formatter should not try to format non-Rust files)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
fix incorrect suggestion in `suboptimal_flops`
fixes#10003
There was an error when trying to negate an expression like `x - 1.0`. We used to format it as `-x - 1.0` whereas a proper negation would be `-(x - 1.0)`.
Therefore, we add parentheses around the expression when it is `ExprKind::Binary`.
We also add parentheses around multiply and divide expressions, even though this is not strictly necessary.
changelog: [`suboptimal_flops`]: fix incorrect suggestion caused by an incorrect negation of floating point expressions.
There was an error when trying to negate an expression
like `x - 1.0`. We used to format it as `-x - 1.0` whereas
a proper negation would be `-(x - 1.0)`.
Therefore, we add parentheses around the expression when it is a
Binary ExprKind.
We also add parentheses around multiply and divide expressions,
even though this is not strictly necessary.
This patch not only improves visibility, but also fixes a potential bug.
When a lint description ends with code block, the string will have three
backquotes at the end.
Since the current implementation prints the default value immediately
after that, the markdown renderer is unable to properly close the code
block.
Add size_of_ref lint
This addresses #9995, which is likely raising a valid point about `std::mem::size_of_val()`: It's [very easy to use double-references as the argument](https://github.com/apache/arrow-datafusion/pull/4371#discussion_r1032385224), which the function will happily accept and give back the size of _the reference_, not the size of the value _behind_ the reference. In the worst case, if the value matches the programmer's expectation, this seems to work, while in fact, everything will go horribly wrong e.g. on a different platform.
The size of a `&T` is independent of what `T` is, and people might want to use `std::mem::size_of_val()` to actually get the size of _any_ reference (e.g. via `&&()`). I would rather suggest that this is always bad behavior, though ([instead](https://doc.rust-lang.org/reference/type-layout.html#pointers-and-references-layout), [and](https://doc.rust-lang.org/stable/std/primitive.usize.html#associatedconstant.BITS)). I, therefore, put this lint into `correctness`.
Since the problem is usually easily fixed by removing extra `&`, I went light on suggesting code.
---
changelog: New lint: [`size_of_ref`]
[#10098](https://github.com/rust-lang/rust-clippy/pull/10098)
<!-- changelog_checked -->
Improve `possible_borrower`
This PR makes several improvements to `clippy_uitls::mir::possible_borrower`. These changes benefit both `needless_borrow` and `redundant clone`.
1. **Use the compiler's `MaybeStorageLive` analysis**
I could spot not functional differences between the one in the compiler and the one in Clippy's repository. So, I removed the latter in favor of the the former.
2. **Make `PossibleBorrower` a dataflow analysis instead of a visitor**
The main benefit of this change is that allows `possible_borrower` to take advantage of statements' relative locations, which is easier to do in an analysis than in a visitor.
This is easier to illustrate with an example, so consider this one:
```rust
fn foo(cx: &LateContext<'_>, lint: &'static Lint) {
cx.struct_span_lint(lint, rustc_span::Span::default(), "", |diag| diag.note(&String::new()));
// ^
}
```
We would like to flag the `&` pointed to by the `^` for removal. `foo`'s MIR begins like this:
```rust
fn span_lint::foo::{closure#0}(_1: [closure@$DIR/needless_borrow.rs:396:68: 396:74], _2: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>) -> &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()> {
debug diag => _2; // in scope 0 at $DIR/needless_borrow.rs:396:69: 396:73
let mut _0: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // return place in scope 0 at $DIR/needless_borrow.rs:396:75: 396:75
let mut _3: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // in scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
let mut _4: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // in scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
let mut _5: &std::string::String; // in scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
let _6: std::string::String; // in scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
bb0: {
StorageLive(_3); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
StorageLive(_4); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
_4 = &mut (*_2); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
StorageLive(_5); // scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
StorageLive(_6); // scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
_6 = std::string::String::new() -> bb1; // scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
// mir::Constant
// + span: $DIR/needless_borrow.rs:396:86: 396:97
// + literal: Const { ty: fn() -> std::string::String {std::string::String::new}, val: Value(<ZST>) }
}
bb1: {
_5 = &_6; // scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
_3 = rustc_errors::diagnostic_builder::DiagnosticBuilder::<'_, ()>::note::<&std::string::String>(move _4, move _5) -> [return: bb2, unwind: bb4]; // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
// mir::Constant
// + span: $DIR/needless_borrow.rs:396:80: 396:84
// + literal: Const { ty: for<'a> fn(&'a mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>, &std::string::String) -> &'a mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()> {rustc_errors::diagnostic_builder::DiagnosticBuilder::<'_, ()>::note::<&std::string::String>}, val: Value(<ZST>) }
}
```
The call to `diag.note` appears in `bb1` on the line beginning with `_3 =`. The `String` is owned by `_6`. So, in the call to `diag.note`, we would like to know whether there are any references to `_6` besides `_5`.
The old, visitor approach did not consider the relative locations of statements. So all borrows were treated the same, *even if they occurred after the location of interest*.
For example, before the `_3 = ...` call, the possible borrowers of `_6` would be just `_5`. But after the call, the possible borrowers would include `_2`, `_3`, and `_4`.
So, in a sense, the call from which we are try to remove the needless borrow is trying to prevent us from removing the needless borrow(!).
With an analysis, things do not get so muddled. We can determine the set of possible borrowers at any specific location, e.g., using a `ResultsCursor`.
3. **Change `only_borrowers` to `at_most_borrowers`**
`possible_borrowers` exposed a function `only_borrowers` that determined whether the borrowers of some local were *exactly* some set `S`. But, from what I can tell, this was overkill. For the lints that currently use `possible_borrower` (`needless_borrow` and `redundant_clone`), all we really want to know is whether there are borrowers *other than* those in `S`. (Put another way, we only care about the subset relation in one direction.) The new function `at_most_borrowers` takes this more tailored approach.
4. **Compute relations "on the fly" rather than using `transitive_relation`**
The visitor would compute and store the transitive closure of the possible borrower relation for an entire MIR body.
But with an analysis, there is effectively a different possible borrower relation at each location in the body. Computing and storing a transitive closure at each location would not be practical.
So the new approach is to compute the transitive closure on the fly, as needed. But the new approach might actually be more efficient, as I now explain.
In all current uses of `at_most_borrowers` (previously `only_borrowers`), the size of the set of borrowers `S` is at most 2. So you need only check at most three borrowers to determine whether the subset relation holds. That is, once you have found a third borrower, you can stop, since you know the relation cannot hold.
Note that `transitive_relation` is still used by `clippy_uitls::mir::possible_origin` (a kind of "subroutine" of `possible_borrower`).
cc: `@Jarcho`
---
changelog: [`needless_borrow`], [`redundant_clone`]: Now track references better and detect more cases
[#9701](https://github.com/rust-lang/rust-clippy/pull/9701)
<!-- changelog_checked -->
Avoid `match_wildcard_for_single_variants` on guarded wild matches
fix#9993
changelog: FP: [`match_wildcard_for_single_variants`]: No longer lints on wildcards with a guard
[#10056](https://github.com/rust-lang/rust-clippy/pull/10056)
<!-- changelog_checked -->
r? `@Jarcho`
Null fn lints
Adds lints to check for code, that assumes nullable `fn()`.
### Lint examples:
`transmute_null_to_fn`:
```rust
error: transmuting a known null pointer into a function pointer
--> $DIR/transmute_null_to_fn.rs:9:23
|
LL | let _: fn() = std::mem::transmute(std::ptr::null::<()>());
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ this transmute results in undefined behavior
|
= help: try wrapping your function pointer type in `Option<T>` instead, and using `None` as a null pointer value
```
`fn_null_check`:
```rust
error: function pointer assumed to be nullable, even though it isn't
--> $DIR/fn_null_check.rs:13:8
|
LL | if (fn_ptr as *mut ()).is_null() {}
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: try wrapping your function pointer type in `Option<T>` instead, and using `is_none` to check for null pointer value
```
Closes#1644
---
changelog: Improvement: [`transmuting_null`]: Now detects `const` pointers to all types
[#10099](https://github.com/rust-lang/rust-clippy/pull/10099)
changelog: New lint: [`transmute_null_to_fn`]
[#10099](https://github.com/rust-lang/rust-clippy/pull/10099)
changelog: New lint: [`fn_null_check`]
[#10099](https://github.com/rust-lang/rust-clippy/pull/10099)
<!-- changelog_checked (This is just a flag for me, please don't add it manually) -->
Identify more cases of useless `into_iter()` calls
changelog: Sugg: [`useless_conversion`]: Now suggests removing calls to `into_iter()` on an expression implementing `Iterator`
[#10020](https://github.com/rust-lang/rust-clippy/pull/10020)
<!-- changelog_checked -->
If the type of the result of a call to `IntoIterator::into_iter()`
and the type of the receiver are the same, then the receiver
implements `Iterator` and `into_iter()` is the identity function.
The call to `into_iter()` may be removed in all but two cases:
- If the receiver implements `Copy`, `into_iter()` will produce
a copy of the receiver and cannot be removed. For example,
`x.into_iter().next()` will not advance `x` while `x.next()` will.
- If the receiver is an immutable local variable and the call to
`into_iter()` appears in a larger expression, removing the call to
`into_iter()` might cause mutability issues. For example, if `x`
is an immutable local variable, `x.into_iter().next()` will
compile while `x.next()` will not as `next()` receives
`&mut self`.
Rustup
r? `@ghost`
I'm on the train and my internet is too bad to download the necessary toolchain, so I have to use CI to find sync fallout.
changelog: none
<!-- changelog_checked -->
fix: not suggest seek_to_start_instead_of_rewind when expr is used
changelog: [`seek_to_start_instead_of_rewind`]: No longer lints, if the return of `seek` is used.
[#10096](https://github.com/rust-lang/rust-clippy/pull/10096)
<!-- changelog_checked -->
Fixes#10065
There used to be a logical bug where IncrementVisitor would
completely stop checking an expression/block after seeing a continue
statement. This led to issue #10058 where a variable incremented
(or otherwise modified) after any continue statement would still be
considered incremented only once.
The solution is to continue scanning the expression after seeing a
`continue` statement, but increment self.depth so that the Visitor
thinks that the rest of the loop is within a conditional.
Changelog 1.66
It's really nice to see a changelog with so many suggestion fixes and improvements. Not much else to say. This should be merged with the coming release on 2022-12-15. For the reviewer, please review it and approve it if it looks good. The merge should wait until the release :)
---
changelog: none
<!-- changelog_checked -->
improve `manual_is_ascii_check ` check
Sorry, not familiar the api, i can only check the method name of expression `<expr-1>.contains(<expr-2>)` after read clippy book and hints from #9933 . i dont know how to check
1. if <expr-1> is a specific range
2. <expr-2> is a character
r? `@xFrednet` could you please provide some more hints? 😝️
---
changelog: Enhancement: [`manual_is_ascii_check`]: Now detects ranges with `.contains()` calls
[#10053](https://github.com/rust-lang/rust-clippy/pull/10053)
<!-- changelog_checked -->
Remove `token::Lit` from `ast::MetaItemLit`.
Currently `ast::MetaItemLit` represents the literal kind twice. This PR removes that redundancy. Best reviewed one commit at a time.
r? `@petrochenkov`
Add 1.58 MSRV for `collapsible_str_replace`
The `Pattern` impl for `[char; N]` was added in 1.58
changelog: Enhancement: [`collapsible_str_replace`]: Now takes MSRV into consideration. The minimal version is 1.58
[#10047](https://github.com/rust-lang/rust-clippy/pull/10047)
add `suppress_restriction_lint_in_const` config
According to #9808 , add a new lint `suppress_lint_in_const` to report even in const context. BTW, i am not good at naming either, if anyone have a better idea, i am happy to change it.
This PR is still in progress, so i keep it draft.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
changelog: Enhancement: [`indexing_slicing`]: add new config `suppress-restriction-lint-in-const` to enable restriction lints, even if the suggestion might not be applicable
r? `@xFrendet`
Fix 10021
This PR proposes a fix for #10021.
The problem is similar to the one that `@mikerite` described in #9505. The compiler is generating an empty substitution for a call, even though the type of `Self` seems to be needed for a predicate. In `@mikerite's` case, the call was to [`IntoFuture::into_future`](https://doc.rust-lang.org/std/future/trait.IntoFuture.html#tymethod.into_future). In this case, the call is to [`Try::branch`](https://doc.rust-lang.org/std/ops/trait.Try.html#tymethod.branch).
The proposed fix is to verify that the parameter whose type is changing has an index within the substitution. The strikes me as a reasonable approach, since if the check were to fail, the following code would be a no-op:
4c123a06ba/clippy_lints/src/methods/unnecessary_to_owned.rs (L420-L428)
Like `@mikerite's` original solution, this solution turns ICEs into false negatives.
changelog: fix `unnecessary_to_owned` false positive involving `Try::branch`
Don't lint `implicit_clone` when the type doesn't implement clone
fixes#10019
changelog: `implicit_clone`: Don't lint when the type doesn't implement clone
Fix#9958
This PR fixes#9958. In order to fix the issue, the lint will now peel reference operators and enclose the expression with parentheses when necessary.
changelog: [`comparison_to_empty`]: Peel deref operators in suggestions when necessary
Don't lint `from_over_into` for opaque types
fixes#9935
This is stalled until the next sync. The impl in question can't be written on the pinned nightly.
changelog: Don't lint `from_over_into` for opaque types
rustc_ast_lowering: Stop lowering imports into multiple items
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
This is required to distinguish between cooked and raw byte string
literals in an `ast::LitKind`, without referring to an adjacent
`token::Lit`. It's a prerequisite for the next commit.
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
Don't lint `explicit_auto_deref` when the initial type is neither a reference, nor a receiver
fixes#9901fixes#9777
changelog: `explicit_auto_deref`: Don't lint when the initial value is neither a reference, nor a receiver
Don't cross contexts while building the suggestion for `redundant_closure_call`
fixes#9957
changelog: `redundant_closure_call`: Don't cross macro contexts while building the suggestion
Move `unnecessary_unsafety_doc` to `pedantic`
This lint was added in #9822. I like the idea, but also agree with #9986 as well. I think it should at least not be warn-by-default. This is one of these cases, where I'd like a group between pedantic and restriction. But I believe that users using `#![warn(clippy::pedantic)]` will know how to enable the lint if they disagree with it.
---
Since the lint is new:
changelog: none
r? `@flip1995` since I'd suggest back porting this, the original PR was merged 16 days ago.
Closes: #9986 (While it doesn't address everything, I believe that this is the best compromise)
Move `index_refutable_slice` to `pedantic`
During the creation, I out this lint into the nursery group to let it run in the wild before moving it to a commonly used group. This move never happened until now, though. It should be safe, as Clippy and I have been using it for months and there are no open issues for is :)
---
changelog: Move `index_refutable_slice` to `pedantic` (Now warn-by-default)
[#9975](https://github.com/rust-lang/rust-clippy/pull/9975)
Add allow-mixed-uninlined-format-args config
Implement `allow-mixed-uninlined-format-args` config param to change the behavior of the `uninlined_format_args` lint. Now it is a part of `style` per [Zulip chat](https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/.60uninlined_format_args.60.20category), and won't propose inlining in case of a mixed usage, e.g. `print!("{} {}", var, 1+2)`. If the user sets `allow-mixed-uninlined-format-args` config param to `false`, the lint would behave like it did before -- proposing to inline args even in the mixed case.
---
changelog: [`uninlined_format_args`]: Added a new config `allow-mixed-uninlined-format-args` to allow the lint, if only some arguments can be inlined
[#9865](https://github.com/rust-lang/rust-clippy/pull/9865)
changelog: Moved [`uninlined_format_args`] to `style` (Now warn-by-default)
[#9865](https://github.com/rust-lang/rust-clippy/pull/9865)
Implement `allow-mixed-uninlined-format-args` config param to change the behavior of the `uninlined_format_args` lint. Now it is a part of `style`, and won't propose inlining in case of a mixed usage, e.g. `print!("{} {}", var, 1+2)`. If the user sets allow-mixed-uninlined-format-args config param to `false`, then it would behave like before, proposing to inline args even in the mixed case.
Separate lifetime ident from lifetime resolution in HIR
Drive-by: change how suggested generic args are computed.
Fixes https://github.com/rust-lang/rust/issues/103815
I recommend reviewing commit-by-commit.
Make rustc_target usable outside of rustc
I'm working on showing type size in rust-analyzer (https://github.com/rust-lang/rust-analyzer/pull/13490) and I currently copied rustc code inside rust-analyzer, which works, but is bad. With this change, I would become able to use `rustc_target` and `rustc_index` directly in r-a, reducing the amount of copy needed.
This PR contains some feature flag to put nightly features behind them to make crates buildable on the stable compiler + makes layout related types generic over index type + removes interning of nested layouts.
Avoid `GenFuture` shim when compiling async constructs
Previously, async constructs would be lowered to "normal" generators, with an additional `from_generator` / `GenFuture` shim in between to convert from `Generator` to `Future`.
The compiler will now special-case these generators internally so that async constructs will *directly* implement `Future` without the need to go through the `from_generator` / `GenFuture` shim.
The primary motivation for this change was hiding this implementation detail in stack traces and debuginfo, but it can in theory also help the optimizer as there is less abstractions to see through.
---
Given this demo code:
```rust
pub async fn a(arg: u32) -> Backtrace {
let bt = b().await;
let _arg = arg;
bt
}
pub async fn b() -> Backtrace {
Backtrace::force_capture()
}
```
I would get the following with the latest stable compiler (on Windows):
```
4: async_codegen:🅱️:async_fn$0
at .\src\lib.rs:10
5: core::future::from_generator::impl$1::poll<enum2$<async_codegen:🅱️:async_fn_env$0> >
at /rustc/897e37553bba8b42751c67658967889d11ecd120\library\core\src\future\mod.rs:91
6: async_codegen:🅰️:async_fn$0
at .\src\lib.rs:4
7: core::future::from_generator::impl$1::poll<enum2$<async_codegen:🅰️:async_fn_env$0> >
at /rustc/897e37553bba8b42751c67658967889d11ecd120\library\core\src\future\mod.rs:91
```
whereas now I get a much cleaner stack trace:
```
3: async_codegen:🅱️:async_fn$0
at .\src\lib.rs:10
4: async_codegen:🅰️:async_fn$0
at .\src\lib.rs:4
```
Previously, async constructs would be lowered to "normal" generators,
with an additional `from_generator` / `GenFuture` shim in between to
convert from `Generator` to `Future`.
The compiler will now special-case these generators internally so that
async constructs will *directly* implement `Future` without the need
to go through the `from_generator` / `GenFuture` shim.
The primary motivation for this change was hiding this implementation
detail in stack traces and debuginfo, but it can in theory also help
the optimizer as there is less abstractions to see through.
Add `clippy_utils::msrv::Msrv` to keep track of the current MSRV
changelog: Fix the scoping of the `#![clippy::msrv]` attribute
Fixes#6920
r? `@Jarcho`
Update Clippy
r? `@Manishearth`
Sorry for taking so long. There were so many blockers and so little time. This situation should be mitigated with #104007 in the future.
Fix#9771 (`unnecessary_to_owned` false positive)
Fixes#9771
In that issue's example(s), the lint tried to add a `&` to a value, which implicitly changed the type of a field to a reference. The fix is to add the reference to `receiver_ty` (the type of the receiver of the `to_owned`-like method), before passing `receiver_ty` to `can_change_type`. `can_change_type` properly rejects the modified `receiver_ty`.
cc: `@mikerite` just because I think he was the author of `can_change_type`.
changelog: fix `unnecessary_to_owned` false positive which implicitly tried to change the type of a field to a reference
Fix `redundant_closure_for_method_calls` suggestion
Fixes#7746. The issue turns out to be more general than raw pointers. The `redundant_closure_for_method_calls` lint produces incorrect suggestions when the method is associated with a type that must be enclosed in angle brackets or must be written with generic arguments substituted. For example:
```rust
fn main() {
// Clippy's suggestion: [T; N]::as_slice
// Correct suggestion: <[u8; 3]>::as_slice
let array_opt: Option<&[u8; 3]> = Some(&[4, 8, 7]);
array_opt.map(|a| a.as_slice());
// Clippy's suggestion: [T]::len
// Correct suggestion: <[u8]>::len
let slice_opt: Option<&[u8]> = Some(b"slice");
slice_opt.map(|s| s.len());
// Clippy's suggestion: *const T::is_null
// Correct suggestion: <*const usize>::is_null
let ptr_opt: Option<*const usize> = Some(&487);
ptr_opt.map(|p| p.is_null());
// Clippy's suggestion: dyn TestTrait::method_on_dyn
// Correct suggestion: <dyn TestTrait>::method_on_dyn
let test_struct = TestStruct {};
let dyn_opt: Option<&dyn TestTrait> = Some(&test_struct);
dyn_opt.map(|d| d.method_on_dyn());
}
// For the trait object example:
trait TestTrait {}
struct TestStruct {}
impl TestTrait for TestStruct {}
impl dyn TestTrait + '_ {
fn method_on_dyn(&self) -> bool {
false
}
}
```
The issue also affects references and tuples, though I had to patch the standard library with non-trait methods for those types to test that. Just in case, I also included handling for `!`, since it appeared to be possible to call methods on it with angle brackets. I just couldn't verify the resulting suggestion, since dead-code analysis eliminates the code first.
This is my first exposure to Rust compiler internals, so please let me know if I'm taking the wrong approach here!
changelog: [`redundant_closure_for_method_calls`]: add angle brackets and substitute generic arguments in suggestion when needed
Rollup of 11 pull requests
Successful merges:
- #103396 (Pin::new_unchecked: discuss pinning closure captures)
- #104416 (Fix using `include_bytes` in pattern position)
- #104557 (Add a test case for async dyn* traits)
- #104559 (Split `MacArgs` in two.)
- #104597 (Probe + better error messsage for `need_migrate_deref_output_trait_object`)
- #104656 (Move tests)
- #104657 (Do not check transmute if has non region infer)
- #104663 (rustdoc: factor out common button CSS)
- #104666 (Migrate alias search result to CSS variables)
- #104674 (Make negative_impl and negative_impl_exists take the right types)
- #104692 (Update test's cfg-if dependency to 1.0)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's
used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all
three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`),
where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them
having partial overlap. I find this makes the code hard to read. It also leads
to various unreachable code paths, and allows invalid values (such as
accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is
now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro
case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and
disallows the invalid values.
Add new lint [`misnamed-getters`]
```
changelog: Add new lint [`misnamed-getters`]
```
Closes#9769
The current lint matches all methods with a body of just one expression under the form `(&mut?)? <expr>.field` where field doesn't match the name of the method but there is a field of the same type in `<expr>` that matches the name. This allows matching nested structs, for example for newtype wrappers. This may cast the net a bit too wide and cause false positives. I'll run [clippy_lint_tester](https://github.com/mikerite/clippy_lint_tester) on the top crates to see how frequently false positives happen.
There also may be room for improvement by checking that the replacement field would work taking into account implementations of `Deref` and `DerefMut` even if the types don't exactly match but I don't know yet how this could be done.
Add `PolyExistentialPredicate` type alias
Wrapping `ExistentialPredicate`s in a binder is very common, and this alias already exists for the `PolyExistential{TraitRef,Projection}` types.
[arithmetic-side-effects] Detect overflowing associated constants of integers
Triggers the negation of maximum unsigned integers using associated constants. Rustc already handles `-128i8` but doesn't handle `-i8::MAX`.
At the same time, allows stuff like `-1234`.
changelog: FP: [arithmetic-side-effects] Detect overflowing associated constants of integers
Keep original literal notation in suggestion
While I did some investigation of https://github.com/rust-lang/rust-clippy/issues/9866 (I couldn't reproduce it though) I found that `unused_rounding` formats as follows:
```rust
3.0_f64.round() // => 3.0f64
```
This PR makes them preserve as the original notation.
```rust
3.0_f64.round() // => 3.0_f64
```
changelog: Suggestion Enhancement: [`unused_rounding`]: The suggestion now preserves the original float literal notation
Improve spans for RPITIT object-safety errors
No reason why we can't point at the `impl Trait` that causes the object-safety violation.
Also [drive-by: Add is_async fn to hir::IsAsync](c4165f3a96), which touches clippy too.
Return multiple resolutions from `def_path_res`
Changes `def_path_res` to return all the resolutions matching the path rather than the first one (with a namespace hint that covered some cases). This would fix any issues that come up with multiple versions of the same crate being present as they all have the same crate name
It also adds resolution of `impl _ {}` items for local items, and removes struct field resolution as it didn't seem to be used anywhere
I tested it on a local crate and it worked for the multiple crate issue, but I couldn't come up with a test that worked well with `// aux-build`, maybe `// aux-crate` after https://github.com/rust-lang/rust/pull/103266 could work but I'm not sure on that either
changelog: [`disallowed_methods`], [`disallowed_types`], [`disallowed_macros`]: fix path resolution with multiple versions of the same crate
changelog: [`disallowed_methods`]: Resolve methods in `impl`s in the current crate
Rollup of 8 pull requests
Successful merges:
- #101162 (Migrate rustc_resolve to use SessionDiagnostic, part # 1)
- #103386 (Don't allow `CoerceUnsized` into `dyn*` (except for trait upcasting))
- #103405 (Detect incorrect chaining of if and if let conditions and recover)
- #103594 (Fix non-associativity of `Instant` math on `aarch64-apple-darwin` targets)
- #104006 (Add variant_name function to `LangItem`)
- #104494 (Migrate GUI test to use functions)
- #104516 (rustdoc: clean up sidebar width CSS)
- #104550 (fix a typo)
Failed merges:
- #104554 (Use `ErrorGuaranteed::unchecked_claim_error_was_emitted` less)
r? `@ghost`
`@rustbot` modify labels: rollup
Extend `needless_borrowed_reference` to structs and tuples, ignore _
changelog: [`needless_borrowed_reference`]: Lint struct and tuple patterns, and patterns containing `_`
Now lints patterns like
```rust
&(ref a, ref b)
&Tuple(ref a, ref b)
&Struct { ref a, ref b }
&(ref a, _)
```
Add variant_name function to `LangItem`
Clippy has an internal lint that checks for the usage of hardcoded def paths and suggests to replace them with a lang or diagnostic item, if possible. This was implemented with a hack, by getting all the variants of the `LangItem` enum and then index into it with the position of the `LangItem` in the `items` list. This is no longer possible, because the `items` list can't be accessed anymore.
Follow up to #103603
cc `@camsteffen`
r? `@oli-obk`
This is blocking the sync between Clippy and Rust. I'm not sure if this is the best solution here, or if I should add a method `items()` to `LanguageItems` and keep the code in Clippy unchanged.
Fix typo in `expect_used` and `unwrap_used` warning messages
"\`an Option\`" -> "an \`Option\`" and "\`a Result\`" -> "a \`Result\`".
changelog: fix typo in `expect_used` and `unwrap_used` warning messages
`never_loop`: don't emit AlwaysBreaks if it targets a block
ref: https://github.com/rust-lang/rust-clippy/pull/9837#issuecomment-1312788194
The previous fix (#9837) was too simple and ignored all break commands inside a labelled block, regardless of whether their destination was a labelled block or a loop. This fix tracks all the labelled blocks in scope to ensure that only breaks targeting loops are considered.
changelog: [`never_loop`]: prevent false negatives from `breaks` nested in labelled blocks
Convert predicates into Predicate in the Obligation constructor
instead of having almost all callers do that.
This reduces a bit of boilerplate, and also paves the way for my work towards https://github.com/rust-lang/compiler-team/issues/531 (as it makes it easier to accept both goals and clauses where right now it only accepts predicates).
Clippy has an internal lint that checks for the usage of hardcoded def
paths and suggests to replace them with a lang or diagnostic item, if
possible. This was implemented with a hack, by getting all the variants
of the `LangItem` enum and then index into it with the position of the
`LangItem` in the `items` list. This is no longer possible, because the
`items` list can't be accessed anymore.
Record `LocalDefId` in HIR nodes instead of a side table
This is part of an attempt to remove the `HirId -> LocalDefId` table from HIR.
This attempt is a prerequisite to creation of `LocalDefId` after HIR lowering (https://github.com/rust-lang/rust/pull/96840), by controlling how `def_id` information is accessed.
This first part adds the information to HIR nodes themselves instead of a table.
The second part is https://github.com/rust-lang/rust/pull/103902
The third part will be to make `hir::Visitor::visit_fn` take a `LocalDefId` as last parameter.
The fourth part will be to completely remove the side table.
When we run `cargo test` in `clippy_lints` directory, it will generate
`foo.txt` in the directory.
In order to avoid that, add `no_run` to rustdoc which contains
`File::create`.
Introduced an ignored_ids parameter.
Takes O(n^2) time in the worst case.
Can be changed to collect block ids in first phase,
and then filter with binary search in second.
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
feat: lint unchecked subtraction of a 'Duration' from an 'Instant'
Hello all, I tried to tackle the open issue #9371 and this is what I came up with.
I have a difficulty currently - some tests are failing:
```
failures:
[ui] ui/manual_instant_elapsed.rs
```
The `manual_instant_elapsed` is failing because of `Instant::now() - duration` test, this now gets also picked by `unchecked_duration_subtraction` lint.
What is the correct way to proceed in this case? Simply update the `.stderr` file for `manual_instant_elapsed` lint?
changelog: [`unchecked_duration_subtraction`]: Add lint for unchecked subtraction of a `Duration` from an `Instant`.
fixes#9371
Make it clear that `or_fun_call` can be a false-positive
Also move it to nursery so that the false-positives can be dealt with.
CC #8574
changelog: [`or_fun_call`]: Mention false-positives, move to nursery.
Add `unnecessary_safety_doc` lint
changelog: [`unnecessary_safety_doc`]: Add `unnecessary_safety_doc` lint
fixes https://github.com/rust-lang/rust-clippy/issues/6880
This lint does not trigger for private functions, just like `missing_safety_docs`. Reason for that was implementation simplicity and because I figured asking first would make more sense, so if it should trigger for private functions as well let me know and I'll fix that up as well.
[`fn_params_excessive_bools`] Make it possible to allow the lint at the method level
changelog: FP: [`fn_params_excessive_bools`]: `#[allow]` now works on methods
fix https://github.com/rust-lang/rust-clippy/issues/9687
Tested without committing but `#[allow]`ing now works. Also rewrote the lint to be a late lint while at it :)
r? `@xFrednet`
In all the cases I've observed, it did not make the code clearer. Using
bools as integer is frowned upon in some languages, in others it's
simply not possible.
You can find comments on the original pull request #8131 that agree with
this point of view.
Fix `explicit_auto_deref` fp
fixes#9763fixes#9811
changelog: `explicit_auto_deref`: Don't lint when the target type is a projection with generic arguments
Update lint example for `collapsible_str_replace`
To fix this warning:
```
warning: the borrowed expression implements the required traits
--> src/fixes/quote_character.rs:16:43
|
16 | let hello = "hesuo worpd".replace(&['s', 'u', 'p'], "l");
| ^^^^^^^^^^^^^^^^ help: change this to: `['s', 'u', 'p']`
|
= note: `#[warn(clippy::needless_borrow)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
```
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: none
Address issues 9739 and 9782
This PR fixes#9739 in the manner I suggested in https://github.com/rust-lang/rust-clippy/issues/9739#issuecomment-1296802376.
This PR also fixes the compilation failures in #9782 (but doesn't address `@e00E's` other objections).
Fixes#9739
r? `@Jarcho`
changelog: Fix two `needless_borrow` false positives, one involving borrows in `if`-`else`s, the other involving qualified function calls
Add `manual_is_ascii_check` lint
Addresses https://github.com/rust-lang/rust-clippy/issues/9290
This PR adds new lint `manual_is_ascii_check`, which detects comparison with ascii ranges using `matches!` macros.
As I mentioned as following in the Issue;
> Yes, that's true. we'll start small and then grow it.
> So I'll try to handle matches! macro with single range as suggested above.
However during writing first version, I was thinking that the changes to support alphabetic and digits will be small patch, so I made a single PR in hope review cost can be reduced.
changelog: add new lint [`manual_is_ascii_check`]
r? `@xFrednet`
Move needless_collect to nursery
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: [`needless_collect`]: Move `needless_collect` to nursery (Now allow-by-default)
After chatting with a few folks, it seems like `needless_collect` is giving false positives pretty regularly (https://github.com/rust-lang/rust-clippy/issues?q=is%3Aissue+is%3Aopen+needless_collect). We're big supporters of clippy in Nushell, and it's one of the passes we require for CI, but we've had to disable this particular lint. Perhaps it should be moved to the nursery until it's improved?
(apologies if this isn't the right approach to disabling a lint by default. I tried to follow the idea I saw other PRs doing in the past)
Add allow-print-in-tests config
Add a config, allow-print-in-tests, that can be set in clippy.toml which allows the usage of `[e]print[ln]!` macros in tests.
Closes#9795
---
changelog: Enhancement: [print_stdout], [print_stderr]: Can now be enabled in test with the `allow-print-in-tests` config value
Changelog for Rust 1.65
Roses are red,
violets are blue,
another 6 weeks,
another changelog, yahoo!
This did not rhyme,
luckily, not a crime.
I want to say something smart,
but I am out of time.
---
Note for the reviewer. This PR is written, as if Rust was already released on 2022-11-03. Please review the changes and approve if you agree, but only merge it after the release. :)
---
changelog: none
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
Improve `needless_lifetimes`
This PR makes the following improvements to `needless_lifetimes`.
* It fixes the following false negative, where `foo` is flagged but `bar` is not:
```rust
fn foo<'a>(x: &'a u8, y: &'_ u8) {}
fn bar<'a>(x: &'a u8, y: &'_ u8, z: &'_ u8) {}
```
* It flags more cases, generally. Previously, `needless_borrow` required *all* lifetimes to be used only once. With the changes, individual lifetimes are flagged for being used only once, even if not all lifetimes are.
* Finally, it tries to produce more clear error messages.
changelog: fix `needless_lifetimes` false negative involving functions with multiple unnamed lifetimes
changelog: in `needless_lifetimes`, flag individual lifetimes used only once, rather than require all lifetimes to be used only once
changelog: in `needless_lifetimes`, emit "replace with `'_`" warnings only when applicable, and point to a generic argument
Add lint for confusing use of `^` instead of `.pow`
fixes#4205
Adds a lint named [`confusing_xor_and_pow`], it warns the user when `a ^ b` is used as the `.pow()` function, it doesn't warn for Hex, Binary... etc.
---
changelog: New lint: [`confusing_xor_and_pow`]
Warn when `clippy::restriction` is enabled via the command line
Currently it catches `#![warn(clippy::restriction)]`, it'll now catch `-W clippy::restriction` from the CLI. Also tweaks the message slightly
changelog: [`blanket_clippy_restriction_lints`]: Warn when `clippy::restriction` is enabled via the command line
Accept `TyCtxt` instead of `TyCtxtAt` in `Ty::is_*` functions
Functions in answer:
- `Ty::is_freeze`
- `Ty::is_sized`
- `Ty::is_unpin`
- `Ty::is_copy_modulo_regions`
This allows to remove a lot of useless `.at(DUMMY_SP)`, making the code a bit nicer :3
r? `@compiler-errors`
spastorino noticed some silly expressions like `item_id.def_id.def_id`.
This commit renames several `def_id: OwnerId` fields as `owner_id`, so
those expressions become `item_id.owner_id.def_id`.
`item_id.owner_id.local_def_id` would be even clearer, but the use of
`def_id` for values of type `LocalDefId` is *very* widespread, so I left
that alone.
privacy: Rename "accessibility levels" to "effective visibilities"
And a couple of other naming and comment tweaks.
Related to https://github.com/rust-lang/rust/issues/48054
For `enum Level` I initially used naming `enum EffectiveVisibilityLevel`, but it was too long and inconvenient because it's used pretty often.
So I shortened it to just `Level`, if it needs to be used from some context where this name would be ambiguous, then it can be imported with renaming like `use rustc_middle::privacy::Level as EffVisLevel` or something.
fix `undocumented-unsafe-blocks` false positive
This fixes#9142 by iterating over the parent nodes as long as within a block, expression, statement, local, const or static.
---
changelog: none
Certain types must be enclosed in angle brackets and must have generic
arguments substituted to create a working suggestion. For example, if
`s` has type `&[u8]`, then `|s| s.len()` may be replaced with
`<[u8]>::len`. Previously, Clippy erroneously suggested `[T]::len`.
Ensure new_ret_no_self is not fired if impl Trait<Self> is returned.
Fix#7344: ensure new_ret_no_self is not fired if `impl Trait<Self>` is returned.
changelog: [`new_ret_no_self`]: No longer lints when `impl Trait<Self>` is returned
[`use_self`] fix suggestion when full path to struct was given
Previously the following wrong suggestion was given
```rust
impl Error for std::fmt::Error {
fn custom<T: std::fmt::Display>(_msg: T) -> Self {
- std::fmt::Error // Should lint
+ Self::Error // Should lint
}
}
```
Also remove known problem line related to #4140 since it's been closed, and refactor the lint
changelog: [`use_self`] fix suggestion when full path to struct was given
`question_mark` don't lint on `if let Err` with `else`
cc #9518
AFAICT the only time this would be a valid suggestion is the rather esoteric
```rust
let _ = if let Err(e) = x {
return Err(e);
} else {
// no side effects
x.unwrap()
}
```
which doesn't seem worth checking to me. Please correct me if I'm missing something.
changelog: [`question_mark`] don't lint on `if let Err` with `else`
Previously the following wrong suggestion was given
```rust
impl Error for std::fmt::Error {
fn custom<T: std::fmt::Display>(_msg: T) -> Self {
- std::fmt::Error // Should lint
+ Self::Error // Should lint
}
}
```
Also remove known problem line related to #4140 since it's been closed, and refactor the lint
Track `clippy.toml` and `Cargo.toml` in `file_depinfo`
Causes cargo to re-run clippy when those paths are modified
Also tracks the path to `clippy-driver` in debug mode to remove the workarounds in `cargo dev lint` and `lintcheck` (cc `@matthiaskrgr)`
changelog: Automatically re-run Clippy if `Cargo.toml` or `clippy.toml` are modified
Fixes#2130Fixes#8512
r? `@flip1995`
Causes cargo to re-run clippy when those paths are modified
Also tracks the path to `clippy-driver` in debug mode to remove the
workarounds in `cargo dev lint` and `lintcheck`
make ignored internally mutable types for `mutable-key` configurable
We had some false positives where people would create their own types that had interior mutability unrelated to hash/eq. This addition lets you configure this as e.g. `arc-like-types=["bytes::Bytes"]`
This fixes#5325 by allowing users to specify the types whose innards like `Arc` should be ignored (the generic types are still checked) for the sake of detecting inner mutability.
r? `@Alexendoo`
---
changelog: Allow configuring types to ignore internal mutability in `mutable-key`
Update `from_raw_with_void_ptr` to support types other than `Box`
This PR updates the `from_raw_with_void_ptr` lint, which covered
`Box::from_raw`, to also cover the `from_raw` static method of the
`Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
It also improves the description and error messages of this lint.
---
changelog: [`from_raw_with_void_ptr`]: Now works with the `Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
add new lint `seek_to_start_instead_of_rewind `
changelog: `seek_to_start_instead_of_rewind`: new lint to suggest using `rewind` instead of `seek` to start
Resolve#8600
We had some false positives where people would create their own types
that had interior mutability unrelated to hash/eq. This addition lets
you configure this as e.g. `arc-like-types=["bytes::Bytes"]`
Sometimes type annotations are needed for type inferrence to work,
or because of coercions. We don't know this, and we also don't
want users to possibly repeat the entire pattern.
This PR updates the `from_raw_with_void_ptr` lint, which covered
`Box::from_raw`, to also cover the `from_raw` static method of the
`Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
It also improves the description and error messages of this lint.
---
changelog: [`from_raw_with_void_ptr`]: Now works with the `Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
Improvement for `equatable_if_let`
fixes#9221
This PR makes sure that enums or structs not implementing `PartialEq` trait but still using the `if let` patterns can be linted to be rewritten with `matches!`.
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[ ] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[ ] Executed `cargo dev update_lints`
- \[ ] Added lint documentation
- \[x] Run `cargo dev fmt`
---
changelog: Improve [`equatable_if_let`] with additional `matches!` suggestions.
Fix allow_attributes_without_reason applying to external crate macros
Previously the `clippy::allow_attributes_without_reason` lint would apply to external crate macros. Many macros in the Rust ecosystem include these `allow` attributes without adding a reason, making this lint pretty much unusable in any sizable Rust project.
This commit fixes that by adding a check to the lint if the attribute is from an external crate macro and returning early.
```
changelog: [`allow_attributes_without_reason`]: allow_attributes_without_reason no longer applies to external crate macros
```
fix: support `map_or` for `or_fun_call` lint
fixes https://github.com/rust-lang/rust-clippy/issues/8993
The methods defined in `KNOW_TYPES`, except for `map_or`, accepts only one argument, so the matching `if let [arg] = args` works only for these methods.
This PR adds `rest_arg` argument to `check_general_case` method and handling of cases with two arguments to support `map_or`.
changelog: `or_fun_call` support `map_or`
* add `rest_arg` to pass second argument from `map_or(U, F)`
* extract some procedures into closure
* add `rest_arg` to pass second argument from `map_or(U, F)`
* extract some procedures into closure
refac: rename rest_arg/second_arg
refac: organize function argument order
* put `second_arg` next to `arg` argument
Mark `let_underscore_lock` and `let_underscore_drop` as uplifted
Here I've renamed both the uplifted lints, however rustc's `let_underscore_lock` is slightly less capable than the clippy lint as it doesn't catch `parking_lot` types or `Result<Guard, ..>`, should we still remove it? The `Result` change looks like it was unintentional to me so that could probably be fixed upstream
changelog: Uplift [`let_underscore_drop`] to rustc https://github.com/rust-lang/rust/pull/97739
changelog: Remove overlap between rustc's `let_underscore_lock` and Clippy's [`let_underscore_lock`]
r? `@flip1995`
[`unwrap_used`], [`expect_used`] do not lint in `test` cfg
changelog: [`unwrap_used`], [`expect_used`] do not lint in `test` cfg
fix https://github.com/rust-lang/rust-clippy/issues/9612
I've updated the doc and used `cfg` acronym, not sure if `conditional compiler flag` would have been better
fix `box-default` ignoring trait objects' types
This avoids removing the turbofish when the `Box` type is a `dyn` or `impl _`.
This fixes#9621.
---
changelog: none
Rollup of 6 pull requests
Successful merges:
- #102287 (Elaborate supertrait bounds when triggering `unused_must_use` on `impl Trait`)
- #102922 (Filtering spans when emitting json)
- #103051 (translation: doc comments with derives, subdiagnostic-less enum variants, more derive use)
- #103111 (Account for hygiene in typo suggestions, and use them to point to shadowed names)
- #103260 (Fixup a few tests needing asm support)
- #103321 (rustdoc: improve appearance of source page navigation bar)
Failed merges:
- #103209 (Diagnostic derives: allow specifying multiple alternative suggestions)
r? `@ghost`
`@rustbot` modify labels: rollup
Fix bug introduced by #9386#9386 introduced a potential out-of-bounds array access. Specifically, a location returned by `local_assignments` could have [`location.statement_index` equal to `mir.basic_blocks[location.block].statements.len()`](b8a9a507bf/clippy_utils/src/mir/mod.rs (L129)), in which case the location would refer to the block terminator:
b8a9a507bf/clippy_lints/src/dereference.rs (L1204-L1206)
I suspect the bug is not triggerable now, because of checks leading up to where it occurs. But a future code change could make it triggerable. Hence, it should be fixed.
r? `@Jarcho`
changelog: none
Update Applicability of `redundant_allocation` lint from `MachineApplicable` to `MaybeIncorrect`
This changes `redundant_allocation` lint from MachineApplicable to MaybeIncorrect
```
changelog: [`redundant_allocation]: Change Applicability from MachineApplicable to MaybeIncorrect
```
fixes#6243
---
changelog: [`redundant_allocation`]: Change Applicability from MachineApplicable to MaybeIncorrect
Add `unused_format_specs` lint
Currently catches two cases:
An empty precision specifier:
```rust
// the same as {}
println!("{:.}", x);
```
And using formatting specs on `format_args!()`:
```rust
// prints `x.`, not `x .`
println("{:5}.", format_args!("x"));
```
changelog: new lint: [`unused_format_specs`]
[`unnecessary_cast`] Do not lint negative hexadecimal literals when cast as floats
fix https://github.com/rust-lang/rust-clippy/issues/9603
changelog: [`unnecessary_cast`] Do not lint negative hexadecimal literals when cast as floats
[`zero_prefixed_literal`] Do not advise to use octal form if not possible
fix https://github.com/rust-lang/rust-clippy/issues/9651
changelog: [`zero_prefixed_literal`] Do not advise to use octal form if not possible
Add new lint `partial_pub_fields`
Signed-off-by: TennyZhuang <zty0826@gmail.com>
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: `partial_pub_fields`: new lint to disallow partial fields of a struct be pub
Resolve#9604
Expand internal lint `unnecessary_def_path`
This PR does essentially two things:
* Separates the internal lints into modules by pass. (`internal_lints.rs` was over 1400 lines, which is a little unruly IMHO.)
* ~Adds a new~ Expands the `unnecessary_def_path` internal lint to flag hardcoded paths to diagnostic and language items.
My understanding is that the latter is currently done by reviewers. Automating this process should make things easier for both reviewers and contributors.
I could make the first bullet a separate PR, or remove it entirely, if desired.
changelog: Add internal lint `diagnostic_item_path`
Add a suggestion and a note about orphan rules for `from_over_into`
Adds a machine applicable suggestion to convert the `Into` impl into a `From` one to `from_over_into`
Also adds a note explaining that `impl From<Local> for Foreign` is fine if the `Into` type is foreign
Closes#7444
Addresses half of #9638
changelog: [`from_over_into`] Add a suggestion and a note about orphan rules
add tests in `implicit_saturating_sub` lint
This adds more tests to the `implicit_saturating_sub` lint to rule out certain false positives that have appeared in the past.
Now with those false positives out of the equation, we can move the lint to `style`.
---
changelog: promote [`implicit-saturating-sub`] to the `style` category
Change uninlined_format_args into a style lint
As [previously discussed](https://github.com/rust-lang/rust-clippy/pull/9233#issuecomment-1256361205), the `uninlined_format_args` should probably be a part of the default style because `println!("{}", foo)` is not as concise or easy to understand as `println!("{foo}")`
changelog: [`uninlined_format_args`]: change to be the default `style`
Fix to_string_in_format_args in parens
Fix suggestions like
```
print!("error: something failed at {}", (Location::caller().to_string()));
```
where the parenthesis enclose some portion of the value.
Fixes#9540
changelog: [`to_string_in_format_args`]: fix incorrect fix when value is enclosed in parenthesis
Fix suggestions like
```
print!("error: something failed at {}", (Location::caller().to_string()));
```
where the parenthesis enclose some portion of the value.
Replace manual let else patterns with let else
Clears the codebase from places where the lint added by #8437 is firing, by adopting let else.
changelog: none
Previously the `clippy::allow_attributes_without_reason` lint would
apply to external crate macros. Many macros in the Rust ecosystem
include these `allow` attributes without adding a reason, making this
lint pretty much unusable in any sizable Rust project.
This commit fixes that by adding a check to the lint if the attribute is
from an external crate macro and returning early.
Uplift `clippy::for_loops_over_fallibles` lint into rustc
This PR, as the title suggests, uplifts [`clippy::for_loops_over_fallibles`] lint into rustc. This lint warns for code like this:
```rust
for _ in Some(1) {}
for _ in Ok::<_, ()>(1) {}
```
i.e. directly iterating over `Option` and `Result` using `for` loop.
There are a number of suggestions that this PR adds (on top of what clippy suggested):
1. If the argument (? is there a better name for that expression) of a `for` loop is a `.next()` call, then we can suggest removing it (or rather replacing with `.by_ref()` to allow iterator being used later)
```rust
for _ in iter.next() {}
// turns into
for _ in iter.by_ref() {}
```
2. (otherwise) We can suggest using `while let`, this is useful for non-iterator, iterator-like things like [async] channels
```rust
for _ in rx.recv() {}
// turns into
while let Some(_) = rx.recv() {}
```
3. If the argument type is `Result<impl IntoIterator, _>` and the body has a `Result<_, _>` type, we can suggest using `?`
```rust
for _ in f() {}
// turns into
for _ in f()? {}
```
4. To preserve the original behavior and clear intent, we can suggest using `if let`
```rust
for _ in f() {}
// turns into
if let Some(_) = f() {}
```
(P.S. `Some` and `Ok` are interchangeable depending on the type)
I still feel that the lint wording/look is somewhat off, so I'll be happy to hear suggestions (on how to improve suggestions :D)!
Resolves#99272
[`clippy::for_loops_over_fallibles`]: https://rust-lang.github.io/rust-clippy/master/index.html#for_loops_over_fallibles
rename `ImplItemKind::TyAlias` to `ImplItemKind::Type`
The naming of this variant seems inconsistent given that this is not really a "type alias", and the associated type variant for `TraitItemKind` is just called `Type`.
Further enhance `needless_borrow`, mildly refactor `redundant_clone`
This PR does the following:
* Moves some code from `redundant_clone` into a new `clippy_utils` module called `mir`, and wraps that code in a function called `dropped_without_further_use`.
* Relaxes the "is copyable" condition condition from #9136 by also suggesting to remove borrows from values dropped without further use. The changes involve the just mentioned function.
* Separates `redundant_clone` into modules.
Strictly speaking, the last bullet is independent of the others. `redundant_clone` is somewhat hairy, IMO. Separating it into modules makes it slightly less so, by helping to delineate what depends upon what.
I've tried to break everything up into digestible commits.
r? `@Jarcho`
(`@Jarcho` I hope you don't mind.)
changelog: continuation of #9136
Add `manual_filter` lint for `Option`
Share much of its implementation with `manual_map` and should greatly benefit from its previous feedback.
I'm sure it's possible to even more refactor both and would gladly take input on that as well as any clippy idiomatic usage, since this is my first lint addition.
I've added the lint to the complexity section for now, I don't know if every new lint needs to go in nursery first.
The matching could be expanded to more than `Some(<value>)` to lint on arbitrary struct matching inside the `Some` but I've left it like it was for `manual_map` for now. `needless_match::pat_same_as_expr` provides a more generic match example.
close https://github.com/rust-lang/rust-clippy/issues/8822
changelog: Add lint [`manual_filter`] for `Option`
extend `box-default` lint, add suggestion
This extends the recently added `box-default` lint to also cover `Box::new(vec![])`, `Box::new(String::from(""))` and `Box::new(Vec::from([]))`. Also the lint now suggests a suitable replacement. I did not find a simple way to check whether the type is fully determined by the outside, so I at least checked for some variations to remove the turbofish in those cases.
---
changelog: none
lint::unsafe_removed_from_name: fix false positive result when allowed
changelog: [`unsafe_removed_from_name`] Fix allowing on imports produces a false positive on `useless_attribute`.
Fixes: #9197
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
FormatArgsExpn: Find comma spans and ignore weird proc macro spans
Fixes the following cases:
A missing `, 1` from the `expect_fun_call` suggestion:
```rust
Some(()).expect(&format!("{x} {}", 1));
```
```
warning: use of `expect` followed by a function call
--> t.rs:7:14
|
7 | Some(()).expect(&format!("{x} {}", 1));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|| panic!("{x} {}"))`
```
The suggestion removing from the comma in the comment rather than the one after the format string:
```rust
println!(
"{}",
// a comment, with a comma in it
x
);
```
```
warning: variables can be used directly in the `format!` string
--> t.rs:9:5
|
9 | / println!(
10 | | "{}",
11 | | // a comment, with a comma in it
12 | | x
13 | | );
| |_____^
|
help: change this to
|
10 ~ "{x}",
11 ~ // a comment
|
```
It also no longer accepts expansions where a format string or argument has a "weird" proc macro span, that is one where the literal/expression it outputs has the span of one of its inputs. Kind of like a `format_args` specific `clippy_utils::is_from_proc_macro`, e.g. `format!(indoc! {" ... "})`
changelog: [`expect_fun_call`]: Fix suggestion for `format!` using captured variables
changelog: [`print_literal`], [`write_literal`], [`uninlined_format_args`]: Fix suggestion when following a comment including a comma
Fix and improve `match_type_on_diagnostic_item`
This extracts the fix for the lint out of #7647. There's still a couple of other functions to check, but at least this will get lint working again.
The two added util functions (`is_diagnostic_item` and `is_lang_item`) are needed to handle `DefId` for unit and tuple struct/variant constructors. The `rustc_diagnostic_item` and `lang` attributes are attached to the struct/variant `DefId`, but most of the time they are used through their constructors which have a different `DefId`. The two utility functions will check if the `DefId` is for a constructor and switch to the associated struct/variant `DefId`.
There does seem to be a bug on rustc's side where constructor `DefId`s from external crates seem to be returning `DefKind::Variant` instead of `DefKind::Ctor()`. There's a workaround put in right.
changelog: None
Remove unused `.fixed` files, only run asm_syntax doctests on x86
Two small changes, removes some unused `.fixed` and makes `clippy_lints` doctests pass on non x86 arches
changelog: none
* Check for `const`s and `static`s from external crates
* Check for `LangItem`s
* Handle inherent functions which have the same name as a field
* Also check the following functions:
* `match_trait_method`
* `match_def_path`
* `is_expr_path_def_path`
* `is_qpath_def_path`
* Handle checking for a constructor to a diagnostic item or `LangItem`
let unnecessary_cast work for trivial non_literal expressions
Signed-off-by: TennyZhuang <zty0826@gmail.com>
---
changelog: [`unnecessary_cast`]: fix for trivial non_literal expressions
Fixes#9562
[`unnecessary_cast`] add parenthesis when negative number uses a method
fix#9563
The issue was probably introduced by 90fe3bea52
changelog: [`unnecessary_cast`] add parenthesis when negative number uses a method
r? llogiq
use `is_integer_literal` more
I noticed that we have the `is_integer_literal` function in our `clippy_utils`, yet almost everywhere people still match int literal expressions manually. So I searched for instances to replace and shorten the code a bit.
---
changelog: none
Implement `manual_clamp` lint
Fixes#9477Fixes#6751
Identifies common patterns where usage of the `clamp` function would be more succinct and clear, and suggests using the `clamp` function instead.
changelog: [`manual_clamp`]: Implement manual_clamp lint
This lint detects calls to a `&self`-taking `as_ptr` method, where
the result is then immediately cast to a `*mut T`. Code like this
is probably invalid, as that pointer will not have write permissions,
and `*mut T` is usually used to write through.
Move lint level source explanation to the bottom
So, uhhhhh
r? `@estebank`
## User-facing change
"note: `#[warn(...)]` on by default" and such are moved to the bottom of the diagnostic:
```diff
- = note: `#[warn(unsupported_calling_conventions)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #87678 <https://github.com/rust-lang/rust/issues/87678>
+ = note: `#[warn(unsupported_calling_conventions)]` on by default
```
Why warning is enabled is the least important thing, so it shouldn't be the first note the user reads, IMO.
## Developer-facing change
`struct_span_lint` and similar methods have a different signature.
Before: `..., impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>)`
After: `..., impl Into<DiagnosticMessage>, impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>`
The reason for this is that `struct_span_lint` needs to edit the diagnostic _after_ `decorate` closure is called. This also makes lint code a little bit nicer in my opinion.
Another option is to use `impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>) -> DiagnosticBuilder<'a, ()>` altough I don't _really_ see reasons to do `let lint = lint.build(message)` everywhere.
## Subtle problem
By moving the message outside of the closure (that may not be called if the lint is disabled) `format!(...)` is executed earlier, possibly formatting `Ty` which may call a query that trims paths that crashes the compiler if there were no warnings...
I don't think it's that big of a deal, considering that we move from `format!(...)` to `fluent` (which is lazy by-default) anyway, however this required adding a workaround which is unfortunate.
## P.S.
I'm sorry, I do not how to make this PR smaller/easier to review. Changes to the lint API affect SO MUCH 😢
`Res::SelfTy` currently has two `Option`s. When the second one is `Some`
the first one is never consulted. So we can split it into two variants,
`Res::SelfTyParam` and `Res::SelfTyAlias`, reducing the size of `Res`
from 24 bytes to 12. This then shrinks `hir::Path` and
`hir::PathSegment`, which are the HIR types that take up the most space.
fix [`needless_borrow`], [`explicit_auto_deref`] FPs on unions
fix https://github.com/rust-lang/rust-clippy/issues/9383
changelog: fix [`needless_borrow`] false positive on unions
changelog: fix [`explicit_auto_deref`] false positive on unions
Left a couple debug derived impls on purpose I needed to debug as I don't think it's noise
Don't lint unstable moves in `std_instead_of_core`
Fixes#9515
changelog: [`std_instead_of_core`]: No longer suggests unstable modules such as `core::error`
add `box-default` lint
This adds a `box-default` lint to suggest using `Box::default()` instead of `Box::new(Default::default())`, which offers less moving parts and potentially better performance according to [the perf book](https://nnethercote.github.io/perf-book/standard-library-types.html#box).
---
changelog: add [`box_default`] lint
[`needless_return`] Recursively remove unneeded semicolons
fix#8336,
fix#8156,
fix https://github.com/rust-lang/rust-clippy/issues/7358,
fix#9192,
fix https://github.com/rust-lang/rust-clippy/issues/9503
changelog: [`needless_return`] Recursively remove unneeded semicolons
For now the suggestion about removing the semicolons are hidden because they would be very noisy and should be obvious if the user wants to apply the lint manually instead of using `--fix`. This could be an issue for beginner, but haven't found better way to display it.
[arithmetic-side-effects] Consider references
Takes into consideration integer references like `&i32::MAX` because currently things like `let _ = &1 + 0` trigger the lint.
changelog: FP: [`arithmetic_side_effects`]: Now ignores references
[9507](https://github.com/rust-lang/rust-clippy/pull/9507)
Don't lint `*_interior_mutable_const` on unions due to potential ICE.
fixes#9445
cc rust-lang/rust#101113
This started ICE'ing sometime last month due to stricter UB checks. I'm not sure how we could check the value of a union as MIRI doesn't seem to store which field is currently active.
changelog: Don't ICE on const unions containing a `!Freeze` type.
Silence [`question_mark`] in const context
fix https://github.com/rust-lang/rust-clippy/issues/9175
When `const_try` is stabilised can be turned into a MSRV
changelog: Silence [`question_mark`] in const context
Implement https://github.com/rust-lang/rust-clippy/issues/8368 - a new
lint to inline format arguments such as `print!("{}", var)` into
`print!("{var}")`.
code | suggestion | comment
---|---|---
`print!("{}", var)` | `print!("{var}")` | simple variables
`print!("{0}", var)` | `print!("{var}")` | positional variables
`print!("{v}", v=var)` | `print!("{var}")` | named variables
`print!("{0} {0}", var)` | `print!("{var} {var}")` | aliased variables
`print!("{0:1$}", var, width)` | `print!("{var:width$}")` | width
support
`print!("{0:.1$}", var, prec)` | `print!("{var:.prec$}")` | precision
support
`print!("{:.*}", prec, var)` | `print!("{var:.prec$}")` | asterisk
support
code | suggestion | comment
---|---|---
`print!("{0}={1}", var, 1+2)` | `print!("{var}={0}", 1+2)` | Format
string uses an indexed argument that cannot be inlined. Supporting this
case requires re-indexing of the format string.
changelog: [`uninlined_format_args`]: A new lint to inline format
arguments, i.e. `print!("{}", var)` into `print!("{var}")`
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
[`never_loop`]: Fix FP with let..else statements.
Fixes#9356
This has been bugging me for a while, so I thought I'd take a stab at it! I'm completely uncertain about the quality of my code, but I think it's an alright start, so opening this PR to get some feedback from more experienced clippy people :)
changelog: [`never_loop`]: Fix FP with let..else statements
Introduce mir::Unevaluated
Previously the distinction between unevaluated constants in the type-system and in mir was not explicit and a little confusing. Probably better to introduce its own type for that.
r? `@lcnr`
Changelog for Rust 1.64 🍎
The normal release preparation dance. I've written the changelog like the version has already been released. The PR can be approved and then merged by anyone after the release of Rust 1.64 🙃
---
changelog: none
Fixes#9504
Compiler generated call `into_iter` nodes return empty substs
which we need when checking it's predicates. Handle this by
simply exitting when we encounter one. This change introduces
false negatives in place of the ICEs.
[arithmetic-side-effects] Finish non-overflowing ops
Extends https://github.com/rust-lang/rust-clippy/pull/9474 to also take into consideration "raw" binary operations. For example, `let a = b / 2` and `let a = 1 * b` won't trigger the lint.
changelog: [arithmetic-side-effects] Finish non-overflowing ops
Clippy pre beta branch fix
Before beta is branched on Friday, I want to move the `unused_peekable` lint that was added in this release cycle (1.65) to `nursery`. This lint was already reported twice (https://github.com/rust-lang/rust-clippy/issues/9456, https://github.com/rust-lang/rust-clippy/issues/9462) in a short time, so it is probably a good idea to fix it before it hits beta and then stable.
r? `@Manishearth`
Make module-style lints resilient to --remap-path-prefix
changelog: [`self_named_module_files`], [`mod_module_files`]: Make module-style lints resilient to `--remap-path-prefix`
Without this if a user has configured `--remap-path-prefix` to be used for a prefix containing the current source directory the lints would silently fail to generate a warning.
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
Migrate write.rs to a late pass
changelog: Migrates write.rs from a pre expansion pass to a late pass
changelog: [`positional_named_format_parameters`] is renamed in favour of the rustc lint `named_arguments_used_positionally`
- Macros are now identified by diagnostic items, so will no longer lint user defined macros named, e.g. a custom `print!`
- `print_literal`/`write_literal` no longer lint no longer lint literals that come from macro expansions, e.g. `env!("FOO")`
- `print_with_newline`/`write_with_newline` no longer lint strings with any internal `\r` or `\n`s
~~A false negative, `print_literal`/`write_literal` don't lint format strings that produce `FormatSpec`s, e.g. ones containing pretty print/width/align specifiers~~
Suggestion changes:
- ~~`print_literal`/`write_literal` no longer have suggestions, as the spans for the `{}`s were not easily obtainable~~
- `print_with_newline`/`write_with_newline` has a better suggestion for a sole literal newline, but no longer has suggestions for len > 1 strings that end in a literal newline
- ~~`use_debug` spans are less precise, now point to the whole format string~~
The diff for write.rs is pretty unwieldy, other than for the `declare_clippy_lint!`s I think you'd be better off viewing it as a brand new file rather than looking at the diff, as it's mostly written from scratch
cc #6610, fixes#5721, fixes#7195, fixes#8615
Fix `unused_peekable` closure and `f(&mut peekable)` false positives
changelog: Fix [`unused_peekable`] false positive when peeked in a closure or called as `f(&mut peekable)`
The `return`/`break` changes aren't part of the fix, they allow an earlier return in some cases. `break` is replaced with `return` for style purposes as they do the same thing in this case
Fixes#9456Fixes#9462
Use `DisplayBuffer` for socket addresses.
Continuation of https://github.com/rust-lang/rust/pull/100625 for socket addresses.
Renames `net::addr` to `net::addr::socket`, `net::ip` to `net::addr::ip` and `net::ip::display_buffer::IpDisplayBuffer` to `net::addr::display_buffer::DisplayBuffer`.
