Fix `explicit_auto_deref` fp
fixes#9763fixes#9811
changelog: `explicit_auto_deref`: Don't lint when the target type is a projection with generic arguments
Update lint example for `collapsible_str_replace`
To fix this warning:
```
warning: the borrowed expression implements the required traits
--> src/fixes/quote_character.rs:16:43
|
16 | let hello = "hesuo worpd".replace(&['s', 'u', 'p'], "l");
| ^^^^^^^^^^^^^^^^ help: change this to: `['s', 'u', 'p']`
|
= note: `#[warn(clippy::needless_borrow)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
```
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: none
Address issues 9739 and 9782
This PR fixes#9739 in the manner I suggested in https://github.com/rust-lang/rust-clippy/issues/9739#issuecomment-1296802376.
This PR also fixes the compilation failures in #9782 (but doesn't address `@e00E's` other objections).
Fixes#9739
r? `@Jarcho`
changelog: Fix two `needless_borrow` false positives, one involving borrows in `if`-`else`s, the other involving qualified function calls
Add `manual_is_ascii_check` lint
Addresses https://github.com/rust-lang/rust-clippy/issues/9290
This PR adds new lint `manual_is_ascii_check`, which detects comparison with ascii ranges using `matches!` macros.
As I mentioned as following in the Issue;
> Yes, that's true. we'll start small and then grow it.
> So I'll try to handle matches! macro with single range as suggested above.
However during writing first version, I was thinking that the changes to support alphabetic and digits will be small patch, so I made a single PR in hope review cost can be reduced.
changelog: add new lint [`manual_is_ascii_check`]
r? `@xFrednet`
Move needless_collect to nursery
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: [`needless_collect`]: Move `needless_collect` to nursery (Now allow-by-default)
After chatting with a few folks, it seems like `needless_collect` is giving false positives pretty regularly (https://github.com/rust-lang/rust-clippy/issues?q=is%3Aissue+is%3Aopen+needless_collect). We're big supporters of clippy in Nushell, and it's one of the passes we require for CI, but we've had to disable this particular lint. Perhaps it should be moved to the nursery until it's improved?
(apologies if this isn't the right approach to disabling a lint by default. I tried to follow the idea I saw other PRs doing in the past)
Add allow-print-in-tests config
Add a config, allow-print-in-tests, that can be set in clippy.toml which allows the usage of `[e]print[ln]!` macros in tests.
Closes#9795
---
changelog: Enhancement: [print_stdout], [print_stderr]: Can now be enabled in test with the `allow-print-in-tests` config value
Changelog for Rust 1.65
Roses are red,
violets are blue,
another 6 weeks,
another changelog, yahoo!
This did not rhyme,
luckily, not a crime.
I want to say something smart,
but I am out of time.
---
Note for the reviewer. This PR is written, as if Rust was already released on 2022-11-03. Please review the changes and approve if you agree, but only merge it after the release. :)
---
changelog: none
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
Improve `needless_lifetimes`
This PR makes the following improvements to `needless_lifetimes`.
* It fixes the following false negative, where `foo` is flagged but `bar` is not:
```rust
fn foo<'a>(x: &'a u8, y: &'_ u8) {}
fn bar<'a>(x: &'a u8, y: &'_ u8, z: &'_ u8) {}
```
* It flags more cases, generally. Previously, `needless_borrow` required *all* lifetimes to be used only once. With the changes, individual lifetimes are flagged for being used only once, even if not all lifetimes are.
* Finally, it tries to produce more clear error messages.
changelog: fix `needless_lifetimes` false negative involving functions with multiple unnamed lifetimes
changelog: in `needless_lifetimes`, flag individual lifetimes used only once, rather than require all lifetimes to be used only once
changelog: in `needless_lifetimes`, emit "replace with `'_`" warnings only when applicable, and point to a generic argument
Add lint for confusing use of `^` instead of `.pow`
fixes#4205
Adds a lint named [`confusing_xor_and_pow`], it warns the user when `a ^ b` is used as the `.pow()` function, it doesn't warn for Hex, Binary... etc.
---
changelog: New lint: [`confusing_xor_and_pow`]
Warn when `clippy::restriction` is enabled via the command line
Currently it catches `#![warn(clippy::restriction)]`, it'll now catch `-W clippy::restriction` from the CLI. Also tweaks the message slightly
changelog: [`blanket_clippy_restriction_lints`]: Warn when `clippy::restriction` is enabled via the command line
Accept `TyCtxt` instead of `TyCtxtAt` in `Ty::is_*` functions
Functions in answer:
- `Ty::is_freeze`
- `Ty::is_sized`
- `Ty::is_unpin`
- `Ty::is_copy_modulo_regions`
This allows to remove a lot of useless `.at(DUMMY_SP)`, making the code a bit nicer :3
r? `@compiler-errors`
spastorino noticed some silly expressions like `item_id.def_id.def_id`.
This commit renames several `def_id: OwnerId` fields as `owner_id`, so
those expressions become `item_id.owner_id.def_id`.
`item_id.owner_id.local_def_id` would be even clearer, but the use of
`def_id` for values of type `LocalDefId` is *very* widespread, so I left
that alone.
privacy: Rename "accessibility levels" to "effective visibilities"
And a couple of other naming and comment tweaks.
Related to https://github.com/rust-lang/rust/issues/48054
For `enum Level` I initially used naming `enum EffectiveVisibilityLevel`, but it was too long and inconvenient because it's used pretty often.
So I shortened it to just `Level`, if it needs to be used from some context where this name would be ambiguous, then it can be imported with renaming like `use rustc_middle::privacy::Level as EffVisLevel` or something.
fix `undocumented-unsafe-blocks` false positive
This fixes#9142 by iterating over the parent nodes as long as within a block, expression, statement, local, const or static.
---
changelog: none
Certain types must be enclosed in angle brackets and must have generic
arguments substituted to create a working suggestion. For example, if
`s` has type `&[u8]`, then `|s| s.len()` may be replaced with
`<[u8]>::len`. Previously, Clippy erroneously suggested `[T]::len`.
Ensure new_ret_no_self is not fired if impl Trait<Self> is returned.
Fix#7344: ensure new_ret_no_self is not fired if `impl Trait<Self>` is returned.
changelog: [`new_ret_no_self`]: No longer lints when `impl Trait<Self>` is returned
[`use_self`] fix suggestion when full path to struct was given
Previously the following wrong suggestion was given
```rust
impl Error for std::fmt::Error {
fn custom<T: std::fmt::Display>(_msg: T) -> Self {
- std::fmt::Error // Should lint
+ Self::Error // Should lint
}
}
```
Also remove known problem line related to #4140 since it's been closed, and refactor the lint
changelog: [`use_self`] fix suggestion when full path to struct was given
`question_mark` don't lint on `if let Err` with `else`
cc #9518
AFAICT the only time this would be a valid suggestion is the rather esoteric
```rust
let _ = if let Err(e) = x {
return Err(e);
} else {
// no side effects
x.unwrap()
}
```
which doesn't seem worth checking to me. Please correct me if I'm missing something.
changelog: [`question_mark`] don't lint on `if let Err` with `else`
Previously the following wrong suggestion was given
```rust
impl Error for std::fmt::Error {
fn custom<T: std::fmt::Display>(_msg: T) -> Self {
- std::fmt::Error // Should lint
+ Self::Error // Should lint
}
}
```
Also remove known problem line related to #4140 since it's been closed, and refactor the lint
Track `clippy.toml` and `Cargo.toml` in `file_depinfo`
Causes cargo to re-run clippy when those paths are modified
Also tracks the path to `clippy-driver` in debug mode to remove the workarounds in `cargo dev lint` and `lintcheck` (cc `@matthiaskrgr)`
changelog: Automatically re-run Clippy if `Cargo.toml` or `clippy.toml` are modified
Fixes#2130Fixes#8512
r? `@flip1995`
Causes cargo to re-run clippy when those paths are modified
Also tracks the path to `clippy-driver` in debug mode to remove the
workarounds in `cargo dev lint` and `lintcheck`
make ignored internally mutable types for `mutable-key` configurable
We had some false positives where people would create their own types that had interior mutability unrelated to hash/eq. This addition lets you configure this as e.g. `arc-like-types=["bytes::Bytes"]`
This fixes#5325 by allowing users to specify the types whose innards like `Arc` should be ignored (the generic types are still checked) for the sake of detecting inner mutability.
r? `@Alexendoo`
---
changelog: Allow configuring types to ignore internal mutability in `mutable-key`
Update `from_raw_with_void_ptr` to support types other than `Box`
This PR updates the `from_raw_with_void_ptr` lint, which covered
`Box::from_raw`, to also cover the `from_raw` static method of the
`Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
It also improves the description and error messages of this lint.
---
changelog: [`from_raw_with_void_ptr`]: Now works with the `Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
add new lint `seek_to_start_instead_of_rewind `
changelog: `seek_to_start_instead_of_rewind`: new lint to suggest using `rewind` instead of `seek` to start
Resolve#8600
We had some false positives where people would create their own types
that had interior mutability unrelated to hash/eq. This addition lets
you configure this as e.g. `arc-like-types=["bytes::Bytes"]`
Sometimes type annotations are needed for type inferrence to work,
or because of coercions. We don't know this, and we also don't
want users to possibly repeat the entire pattern.
This PR updates the `from_raw_with_void_ptr` lint, which covered
`Box::from_raw`, to also cover the `from_raw` static method of the
`Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
It also improves the description and error messages of this lint.
---
changelog: [`from_raw_with_void_ptr`]: Now works with the `Rc`, `Arc`, `alloc::rc::Weak` and `alloc::sync::Weak` types.
Improvement for `equatable_if_let`
fixes#9221
This PR makes sure that enums or structs not implementing `PartialEq` trait but still using the `if let` patterns can be linted to be rewritten with `matches!`.
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[ ] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[ ] Executed `cargo dev update_lints`
- \[ ] Added lint documentation
- \[x] Run `cargo dev fmt`
---
changelog: Improve [`equatable_if_let`] with additional `matches!` suggestions.
Fix allow_attributes_without_reason applying to external crate macros
Previously the `clippy::allow_attributes_without_reason` lint would apply to external crate macros. Many macros in the Rust ecosystem include these `allow` attributes without adding a reason, making this lint pretty much unusable in any sizable Rust project.
This commit fixes that by adding a check to the lint if the attribute is from an external crate macro and returning early.
```
changelog: [`allow_attributes_without_reason`]: allow_attributes_without_reason no longer applies to external crate macros
```
fix: support `map_or` for `or_fun_call` lint
fixes https://github.com/rust-lang/rust-clippy/issues/8993
The methods defined in `KNOW_TYPES`, except for `map_or`, accepts only one argument, so the matching `if let [arg] = args` works only for these methods.
This PR adds `rest_arg` argument to `check_general_case` method and handling of cases with two arguments to support `map_or`.
changelog: `or_fun_call` support `map_or`
* add `rest_arg` to pass second argument from `map_or(U, F)`
* extract some procedures into closure
* add `rest_arg` to pass second argument from `map_or(U, F)`
* extract some procedures into closure
refac: rename rest_arg/second_arg
refac: organize function argument order
* put `second_arg` next to `arg` argument
Mark `let_underscore_lock` and `let_underscore_drop` as uplifted
Here I've renamed both the uplifted lints, however rustc's `let_underscore_lock` is slightly less capable than the clippy lint as it doesn't catch `parking_lot` types or `Result<Guard, ..>`, should we still remove it? The `Result` change looks like it was unintentional to me so that could probably be fixed upstream
changelog: Uplift [`let_underscore_drop`] to rustc https://github.com/rust-lang/rust/pull/97739
changelog: Remove overlap between rustc's `let_underscore_lock` and Clippy's [`let_underscore_lock`]
r? `@flip1995`
[`unwrap_used`], [`expect_used`] do not lint in `test` cfg
changelog: [`unwrap_used`], [`expect_used`] do not lint in `test` cfg
fix https://github.com/rust-lang/rust-clippy/issues/9612
I've updated the doc and used `cfg` acronym, not sure if `conditional compiler flag` would have been better
fix `box-default` ignoring trait objects' types
This avoids removing the turbofish when the `Box` type is a `dyn` or `impl _`.
This fixes#9621.
---
changelog: none
Rollup of 6 pull requests
Successful merges:
- #102287 (Elaborate supertrait bounds when triggering `unused_must_use` on `impl Trait`)
- #102922 (Filtering spans when emitting json)
- #103051 (translation: doc comments with derives, subdiagnostic-less enum variants, more derive use)
- #103111 (Account for hygiene in typo suggestions, and use them to point to shadowed names)
- #103260 (Fixup a few tests needing asm support)
- #103321 (rustdoc: improve appearance of source page navigation bar)
Failed merges:
- #103209 (Diagnostic derives: allow specifying multiple alternative suggestions)
r? `@ghost`
`@rustbot` modify labels: rollup
Fix bug introduced by #9386#9386 introduced a potential out-of-bounds array access. Specifically, a location returned by `local_assignments` could have [`location.statement_index` equal to `mir.basic_blocks[location.block].statements.len()`](b8a9a507bf/clippy_utils/src/mir/mod.rs (L129)), in which case the location would refer to the block terminator:
b8a9a507bf/clippy_lints/src/dereference.rs (L1204-L1206)
I suspect the bug is not triggerable now, because of checks leading up to where it occurs. But a future code change could make it triggerable. Hence, it should be fixed.
r? `@Jarcho`
changelog: none
Update Applicability of `redundant_allocation` lint from `MachineApplicable` to `MaybeIncorrect`
This changes `redundant_allocation` lint from MachineApplicable to MaybeIncorrect
```
changelog: [`redundant_allocation]: Change Applicability from MachineApplicable to MaybeIncorrect
```
fixes#6243
---
changelog: [`redundant_allocation`]: Change Applicability from MachineApplicable to MaybeIncorrect
Add `unused_format_specs` lint
Currently catches two cases:
An empty precision specifier:
```rust
// the same as {}
println!("{:.}", x);
```
And using formatting specs on `format_args!()`:
```rust
// prints `x.`, not `x .`
println("{:5}.", format_args!("x"));
```
changelog: new lint: [`unused_format_specs`]
[`unnecessary_cast`] Do not lint negative hexadecimal literals when cast as floats
fix https://github.com/rust-lang/rust-clippy/issues/9603
changelog: [`unnecessary_cast`] Do not lint negative hexadecimal literals when cast as floats
[`zero_prefixed_literal`] Do not advise to use octal form if not possible
fix https://github.com/rust-lang/rust-clippy/issues/9651
changelog: [`zero_prefixed_literal`] Do not advise to use octal form if not possible
Add new lint `partial_pub_fields`
Signed-off-by: TennyZhuang <zty0826@gmail.com>
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: `partial_pub_fields`: new lint to disallow partial fields of a struct be pub
Resolve#9604
Expand internal lint `unnecessary_def_path`
This PR does essentially two things:
* Separates the internal lints into modules by pass. (`internal_lints.rs` was over 1400 lines, which is a little unruly IMHO.)
* ~Adds a new~ Expands the `unnecessary_def_path` internal lint to flag hardcoded paths to diagnostic and language items.
My understanding is that the latter is currently done by reviewers. Automating this process should make things easier for both reviewers and contributors.
I could make the first bullet a separate PR, or remove it entirely, if desired.
changelog: Add internal lint `diagnostic_item_path`
Add a suggestion and a note about orphan rules for `from_over_into`
Adds a machine applicable suggestion to convert the `Into` impl into a `From` one to `from_over_into`
Also adds a note explaining that `impl From<Local> for Foreign` is fine if the `Into` type is foreign
Closes#7444
Addresses half of #9638
changelog: [`from_over_into`] Add a suggestion and a note about orphan rules
add tests in `implicit_saturating_sub` lint
This adds more tests to the `implicit_saturating_sub` lint to rule out certain false positives that have appeared in the past.
Now with those false positives out of the equation, we can move the lint to `style`.
---
changelog: promote [`implicit-saturating-sub`] to the `style` category
Change uninlined_format_args into a style lint
As [previously discussed](https://github.com/rust-lang/rust-clippy/pull/9233#issuecomment-1256361205), the `uninlined_format_args` should probably be a part of the default style because `println!("{}", foo)` is not as concise or easy to understand as `println!("{foo}")`
changelog: [`uninlined_format_args`]: change to be the default `style`
Fix to_string_in_format_args in parens
Fix suggestions like
```
print!("error: something failed at {}", (Location::caller().to_string()));
```
where the parenthesis enclose some portion of the value.
Fixes#9540
changelog: [`to_string_in_format_args`]: fix incorrect fix when value is enclosed in parenthesis
Fix suggestions like
```
print!("error: something failed at {}", (Location::caller().to_string()));
```
where the parenthesis enclose some portion of the value.
Replace manual let else patterns with let else
Clears the codebase from places where the lint added by #8437 is firing, by adopting let else.
changelog: none
Previously the `clippy::allow_attributes_without_reason` lint would
apply to external crate macros. Many macros in the Rust ecosystem
include these `allow` attributes without adding a reason, making this
lint pretty much unusable in any sizable Rust project.
This commit fixes that by adding a check to the lint if the attribute is
from an external crate macro and returning early.
Uplift `clippy::for_loops_over_fallibles` lint into rustc
This PR, as the title suggests, uplifts [`clippy::for_loops_over_fallibles`] lint into rustc. This lint warns for code like this:
```rust
for _ in Some(1) {}
for _ in Ok::<_, ()>(1) {}
```
i.e. directly iterating over `Option` and `Result` using `for` loop.
There are a number of suggestions that this PR adds (on top of what clippy suggested):
1. If the argument (? is there a better name for that expression) of a `for` loop is a `.next()` call, then we can suggest removing it (or rather replacing with `.by_ref()` to allow iterator being used later)
```rust
for _ in iter.next() {}
// turns into
for _ in iter.by_ref() {}
```
2. (otherwise) We can suggest using `while let`, this is useful for non-iterator, iterator-like things like [async] channels
```rust
for _ in rx.recv() {}
// turns into
while let Some(_) = rx.recv() {}
```
3. If the argument type is `Result<impl IntoIterator, _>` and the body has a `Result<_, _>` type, we can suggest using `?`
```rust
for _ in f() {}
// turns into
for _ in f()? {}
```
4. To preserve the original behavior and clear intent, we can suggest using `if let`
```rust
for _ in f() {}
// turns into
if let Some(_) = f() {}
```
(P.S. `Some` and `Ok` are interchangeable depending on the type)
I still feel that the lint wording/look is somewhat off, so I'll be happy to hear suggestions (on how to improve suggestions :D)!
Resolves#99272
[`clippy::for_loops_over_fallibles`]: https://rust-lang.github.io/rust-clippy/master/index.html#for_loops_over_fallibles
rename `ImplItemKind::TyAlias` to `ImplItemKind::Type`
The naming of this variant seems inconsistent given that this is not really a "type alias", and the associated type variant for `TraitItemKind` is just called `Type`.
Further enhance `needless_borrow`, mildly refactor `redundant_clone`
This PR does the following:
* Moves some code from `redundant_clone` into a new `clippy_utils` module called `mir`, and wraps that code in a function called `dropped_without_further_use`.
* Relaxes the "is copyable" condition condition from #9136 by also suggesting to remove borrows from values dropped without further use. The changes involve the just mentioned function.
* Separates `redundant_clone` into modules.
Strictly speaking, the last bullet is independent of the others. `redundant_clone` is somewhat hairy, IMO. Separating it into modules makes it slightly less so, by helping to delineate what depends upon what.
I've tried to break everything up into digestible commits.
r? `@Jarcho`
(`@Jarcho` I hope you don't mind.)
changelog: continuation of #9136
Add `manual_filter` lint for `Option`
Share much of its implementation with `manual_map` and should greatly benefit from its previous feedback.
I'm sure it's possible to even more refactor both and would gladly take input on that as well as any clippy idiomatic usage, since this is my first lint addition.
I've added the lint to the complexity section for now, I don't know if every new lint needs to go in nursery first.
The matching could be expanded to more than `Some(<value>)` to lint on arbitrary struct matching inside the `Some` but I've left it like it was for `manual_map` for now. `needless_match::pat_same_as_expr` provides a more generic match example.
close https://github.com/rust-lang/rust-clippy/issues/8822
changelog: Add lint [`manual_filter`] for `Option`
extend `box-default` lint, add suggestion
This extends the recently added `box-default` lint to also cover `Box::new(vec![])`, `Box::new(String::from(""))` and `Box::new(Vec::from([]))`. Also the lint now suggests a suitable replacement. I did not find a simple way to check whether the type is fully determined by the outside, so I at least checked for some variations to remove the turbofish in those cases.
---
changelog: none
lint::unsafe_removed_from_name: fix false positive result when allowed
changelog: [`unsafe_removed_from_name`] Fix allowing on imports produces a false positive on `useless_attribute`.
Fixes: #9197
Signed-off-by: Andy-Python-Programmer <andypythonappdeveloper@gmail.com>
FormatArgsExpn: Find comma spans and ignore weird proc macro spans
Fixes the following cases:
A missing `, 1` from the `expect_fun_call` suggestion:
```rust
Some(()).expect(&format!("{x} {}", 1));
```
```
warning: use of `expect` followed by a function call
--> t.rs:7:14
|
7 | Some(()).expect(&format!("{x} {}", 1));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try this: `unwrap_or_else(|| panic!("{x} {}"))`
```
The suggestion removing from the comma in the comment rather than the one after the format string:
```rust
println!(
"{}",
// a comment, with a comma in it
x
);
```
```
warning: variables can be used directly in the `format!` string
--> t.rs:9:5
|
9 | / println!(
10 | | "{}",
11 | | // a comment, with a comma in it
12 | | x
13 | | );
| |_____^
|
help: change this to
|
10 ~ "{x}",
11 ~ // a comment
|
```
It also no longer accepts expansions where a format string or argument has a "weird" proc macro span, that is one where the literal/expression it outputs has the span of one of its inputs. Kind of like a `format_args` specific `clippy_utils::is_from_proc_macro`, e.g. `format!(indoc! {" ... "})`
changelog: [`expect_fun_call`]: Fix suggestion for `format!` using captured variables
changelog: [`print_literal`], [`write_literal`], [`uninlined_format_args`]: Fix suggestion when following a comment including a comma
Fix and improve `match_type_on_diagnostic_item`
This extracts the fix for the lint out of #7647. There's still a couple of other functions to check, but at least this will get lint working again.
The two added util functions (`is_diagnostic_item` and `is_lang_item`) are needed to handle `DefId` for unit and tuple struct/variant constructors. The `rustc_diagnostic_item` and `lang` attributes are attached to the struct/variant `DefId`, but most of the time they are used through their constructors which have a different `DefId`. The two utility functions will check if the `DefId` is for a constructor and switch to the associated struct/variant `DefId`.
There does seem to be a bug on rustc's side where constructor `DefId`s from external crates seem to be returning `DefKind::Variant` instead of `DefKind::Ctor()`. There's a workaround put in right.
changelog: None
Remove unused `.fixed` files, only run asm_syntax doctests on x86
Two small changes, removes some unused `.fixed` and makes `clippy_lints` doctests pass on non x86 arches
changelog: none
* Check for `const`s and `static`s from external crates
* Check for `LangItem`s
* Handle inherent functions which have the same name as a field
* Also check the following functions:
* `match_trait_method`
* `match_def_path`
* `is_expr_path_def_path`
* `is_qpath_def_path`
* Handle checking for a constructor to a diagnostic item or `LangItem`
let unnecessary_cast work for trivial non_literal expressions
Signed-off-by: TennyZhuang <zty0826@gmail.com>
---
changelog: [`unnecessary_cast`]: fix for trivial non_literal expressions
Fixes#9562
[`unnecessary_cast`] add parenthesis when negative number uses a method
fix#9563
The issue was probably introduced by 90fe3bea52
changelog: [`unnecessary_cast`] add parenthesis when negative number uses a method
r? llogiq
use `is_integer_literal` more
I noticed that we have the `is_integer_literal` function in our `clippy_utils`, yet almost everywhere people still match int literal expressions manually. So I searched for instances to replace and shorten the code a bit.
---
changelog: none
Implement `manual_clamp` lint
Fixes#9477Fixes#6751
Identifies common patterns where usage of the `clamp` function would be more succinct and clear, and suggests using the `clamp` function instead.
changelog: [`manual_clamp`]: Implement manual_clamp lint
This lint detects calls to a `&self`-taking `as_ptr` method, where
the result is then immediately cast to a `*mut T`. Code like this
is probably invalid, as that pointer will not have write permissions,
and `*mut T` is usually used to write through.
Move lint level source explanation to the bottom
So, uhhhhh
r? `@estebank`
## User-facing change
"note: `#[warn(...)]` on by default" and such are moved to the bottom of the diagnostic:
```diff
- = note: `#[warn(unsupported_calling_conventions)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #87678 <https://github.com/rust-lang/rust/issues/87678>
+ = note: `#[warn(unsupported_calling_conventions)]` on by default
```
Why warning is enabled is the least important thing, so it shouldn't be the first note the user reads, IMO.
## Developer-facing change
`struct_span_lint` and similar methods have a different signature.
Before: `..., impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>)`
After: `..., impl Into<DiagnosticMessage>, impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>`
The reason for this is that `struct_span_lint` needs to edit the diagnostic _after_ `decorate` closure is called. This also makes lint code a little bit nicer in my opinion.
Another option is to use `impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>) -> DiagnosticBuilder<'a, ()>` altough I don't _really_ see reasons to do `let lint = lint.build(message)` everywhere.
## Subtle problem
By moving the message outside of the closure (that may not be called if the lint is disabled) `format!(...)` is executed earlier, possibly formatting `Ty` which may call a query that trims paths that crashes the compiler if there were no warnings...
I don't think it's that big of a deal, considering that we move from `format!(...)` to `fluent` (which is lazy by-default) anyway, however this required adding a workaround which is unfortunate.
## P.S.
I'm sorry, I do not how to make this PR smaller/easier to review. Changes to the lint API affect SO MUCH 😢
`Res::SelfTy` currently has two `Option`s. When the second one is `Some`
the first one is never consulted. So we can split it into two variants,
`Res::SelfTyParam` and `Res::SelfTyAlias`, reducing the size of `Res`
from 24 bytes to 12. This then shrinks `hir::Path` and
`hir::PathSegment`, which are the HIR types that take up the most space.
fix [`needless_borrow`], [`explicit_auto_deref`] FPs on unions
fix https://github.com/rust-lang/rust-clippy/issues/9383
changelog: fix [`needless_borrow`] false positive on unions
changelog: fix [`explicit_auto_deref`] false positive on unions
Left a couple debug derived impls on purpose I needed to debug as I don't think it's noise
Don't lint unstable moves in `std_instead_of_core`
Fixes#9515
changelog: [`std_instead_of_core`]: No longer suggests unstable modules such as `core::error`
add `box-default` lint
This adds a `box-default` lint to suggest using `Box::default()` instead of `Box::new(Default::default())`, which offers less moving parts and potentially better performance according to [the perf book](https://nnethercote.github.io/perf-book/standard-library-types.html#box).
---
changelog: add [`box_default`] lint
[`needless_return`] Recursively remove unneeded semicolons
fix#8336,
fix#8156,
fix https://github.com/rust-lang/rust-clippy/issues/7358,
fix#9192,
fix https://github.com/rust-lang/rust-clippy/issues/9503
changelog: [`needless_return`] Recursively remove unneeded semicolons
For now the suggestion about removing the semicolons are hidden because they would be very noisy and should be obvious if the user wants to apply the lint manually instead of using `--fix`. This could be an issue for beginner, but haven't found better way to display it.
[arithmetic-side-effects] Consider references
Takes into consideration integer references like `&i32::MAX` because currently things like `let _ = &1 + 0` trigger the lint.
changelog: FP: [`arithmetic_side_effects`]: Now ignores references
[9507](https://github.com/rust-lang/rust-clippy/pull/9507)
Don't lint `*_interior_mutable_const` on unions due to potential ICE.
fixes#9445
cc rust-lang/rust#101113
This started ICE'ing sometime last month due to stricter UB checks. I'm not sure how we could check the value of a union as MIRI doesn't seem to store which field is currently active.
changelog: Don't ICE on const unions containing a `!Freeze` type.
Silence [`question_mark`] in const context
fix https://github.com/rust-lang/rust-clippy/issues/9175
When `const_try` is stabilised can be turned into a MSRV
changelog: Silence [`question_mark`] in const context
Implement https://github.com/rust-lang/rust-clippy/issues/8368 - a new
lint to inline format arguments such as `print!("{}", var)` into
`print!("{var}")`.
code | suggestion | comment
---|---|---
`print!("{}", var)` | `print!("{var}")` | simple variables
`print!("{0}", var)` | `print!("{var}")` | positional variables
`print!("{v}", v=var)` | `print!("{var}")` | named variables
`print!("{0} {0}", var)` | `print!("{var} {var}")` | aliased variables
`print!("{0:1$}", var, width)` | `print!("{var:width$}")` | width
support
`print!("{0:.1$}", var, prec)` | `print!("{var:.prec$}")` | precision
support
`print!("{:.*}", prec, var)` | `print!("{var:.prec$}")` | asterisk
support
code | suggestion | comment
---|---|---
`print!("{0}={1}", var, 1+2)` | `print!("{var}={0}", 1+2)` | Format
string uses an indexed argument that cannot be inlined. Supporting this
case requires re-indexing of the format string.
changelog: [`uninlined_format_args`]: A new lint to inline format
arguments, i.e. `print!("{}", var)` into `print!("{var}")`
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
[`never_loop`]: Fix FP with let..else statements.
Fixes#9356
This has been bugging me for a while, so I thought I'd take a stab at it! I'm completely uncertain about the quality of my code, but I think it's an alright start, so opening this PR to get some feedback from more experienced clippy people :)
changelog: [`never_loop`]: Fix FP with let..else statements
Introduce mir::Unevaluated
Previously the distinction between unevaluated constants in the type-system and in mir was not explicit and a little confusing. Probably better to introduce its own type for that.
r? `@lcnr`
Changelog for Rust 1.64 🍎
The normal release preparation dance. I've written the changelog like the version has already been released. The PR can be approved and then merged by anyone after the release of Rust 1.64 🙃
---
changelog: none
Fixes#9504
Compiler generated call `into_iter` nodes return empty substs
which we need when checking it's predicates. Handle this by
simply exitting when we encounter one. This change introduces
false negatives in place of the ICEs.
[arithmetic-side-effects] Finish non-overflowing ops
Extends https://github.com/rust-lang/rust-clippy/pull/9474 to also take into consideration "raw" binary operations. For example, `let a = b / 2` and `let a = 1 * b` won't trigger the lint.
changelog: [arithmetic-side-effects] Finish non-overflowing ops
Clippy pre beta branch fix
Before beta is branched on Friday, I want to move the `unused_peekable` lint that was added in this release cycle (1.65) to `nursery`. This lint was already reported twice (https://github.com/rust-lang/rust-clippy/issues/9456, https://github.com/rust-lang/rust-clippy/issues/9462) in a short time, so it is probably a good idea to fix it before it hits beta and then stable.
r? `@Manishearth`
Make module-style lints resilient to --remap-path-prefix
changelog: [`self_named_module_files`], [`mod_module_files`]: Make module-style lints resilient to `--remap-path-prefix`
Without this if a user has configured `--remap-path-prefix` to be used for a prefix containing the current source directory the lints would silently fail to generate a warning.
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
Migrate write.rs to a late pass
changelog: Migrates write.rs from a pre expansion pass to a late pass
changelog: [`positional_named_format_parameters`] is renamed in favour of the rustc lint `named_arguments_used_positionally`
- Macros are now identified by diagnostic items, so will no longer lint user defined macros named, e.g. a custom `print!`
- `print_literal`/`write_literal` no longer lint no longer lint literals that come from macro expansions, e.g. `env!("FOO")`
- `print_with_newline`/`write_with_newline` no longer lint strings with any internal `\r` or `\n`s
~~A false negative, `print_literal`/`write_literal` don't lint format strings that produce `FormatSpec`s, e.g. ones containing pretty print/width/align specifiers~~
Suggestion changes:
- ~~`print_literal`/`write_literal` no longer have suggestions, as the spans for the `{}`s were not easily obtainable~~
- `print_with_newline`/`write_with_newline` has a better suggestion for a sole literal newline, but no longer has suggestions for len > 1 strings that end in a literal newline
- ~~`use_debug` spans are less precise, now point to the whole format string~~
The diff for write.rs is pretty unwieldy, other than for the `declare_clippy_lint!`s I think you'd be better off viewing it as a brand new file rather than looking at the diff, as it's mostly written from scratch
cc #6610, fixes#5721, fixes#7195, fixes#8615
Fix `unused_peekable` closure and `f(&mut peekable)` false positives
changelog: Fix [`unused_peekable`] false positive when peeked in a closure or called as `f(&mut peekable)`
The `return`/`break` changes aren't part of the fix, they allow an earlier return in some cases. `break` is replaced with `return` for style purposes as they do the same thing in this case
Fixes#9456Fixes#9462
Use `DisplayBuffer` for socket addresses.
Continuation of https://github.com/rust-lang/rust/pull/100625 for socket addresses.
Renames `net::addr` to `net::addr::socket`, `net::ip` to `net::addr::ip` and `net::ip::display_buffer::IpDisplayBuffer` to `net::addr::display_buffer::DisplayBuffer`.
Fix `range_{plus,minus}_one` bad suggestions
Fixes#9431.
The current `range_plus_one` and `range_minus_one` suggestions are completely incorrect when macros are involved.
This commit resolves this by disabling the lints for any range expression that is expanded from a macro. The reasons for this are that it is very difficult to create a correct suggestion in this case and that false negatives are less important for pedantic lints.
changelog: Fix `range_{plus,minus}_one` bad suggestions
Fixes#9431.
The current `range_plus_one` and `range_minus_one` suggestions
are completely incorrect when macros are involved.
This commit resolves this by disabling the lints for any range
expression that is expanded from a macro. The reasons for this
are that it is very difficult to create a correct suggestion in
this case and that false negatives are less important for
pedantic lints.
Rollup of 7 pull requests
Successful merges:
- #98933 (Opaque types' generic params do not imply anything about their hidden type's lifetimes)
- #101041 (translations(rustc_session): migrates rustc_session to use SessionDiagnostic - Pt. 2)
- #101424 (Adjust and slightly generalize operator error suggestion)
- #101496 (Allow lower_lifetime_binder receive a closure)
- #101501 (Allow lint passes to be bound by `TyCtxt`)
- #101515 (Recover from typo where == is used in place of =)
- #101545 (Remove unnecessary `PartialOrd` and `Ord`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Allow lint passes to be bound by `TyCtxt`
This will allow storing things like `Ty<'tcx>` inside late lint passes. It's already possible to store various id types so they're already implicitly bound to a specific `TyCtxt`.
r? rust-lang/compiler
rustc: Parameterize `ty::Visibility` over used ID
It allows using `LocalDefId` instead of `DefId` when possible, and also encode cheaper `Visibility<DefIndex>` into metadata.
[Arithmetic] Consider literals
Fixes https://github.com/rust-lang/rust-clippy/issues/9307 and makes the `arithmetic` lint behave like `integer_arithmetic`.
It is worth noting that literal integers of a binary operation (`1 + 1`, `i32::MAX + 1`), **regardless if they are in a constant environment**, won't trigger the lint. Assign operations also have similar reasoning.
changelog: Consider literals in the arithmetic lint
Suggest `unwrap_or_default` when closure returns `"".to_string`
Closes https://github.com/rust-lang/rust-clippy/issues/9420
changelog: [`unwrap_or_else_default`]: suggest `unwrap_or_default()` instead of `unwrap_or_else` with a closure that returns an empty `to_string`.
`BindingAnnotation` refactor
* `ast::BindingMode` is deleted and replaced with `hir::BindingAnnotation` (which is moved to `ast`)
* `BindingAnnotation` is changed from an enum to a tuple struct e.g. `BindingAnnotation(ByRef::No, Mutability::Mut)`
* Associated constants added for convenience `BindingAnnotation::{NONE, REF, MUT, REF_MUT}`
One goal is to make it more clear that `BindingAnnotation` merely represents syntax `ref mut` and not the actual binding mode. This was especially confusing since we had `ast::BindingMode`->`hir::BindingAnnotation`->`thir::BindingMode`.
I wish there were more symmetry between `ByRef` and `Mutability` (variant) naming (maybe `Mutable::Yes`?), and I also don't love how long the name `BindingAnnotation` is, but this seems like the best compromise. Ideas welcome.
Unlike past similar work done in #6228, expand the existing `or_fun_call`
lint to detect `or_insert` calls with a `T::new()` or `T::default()`
argument, much like currently done for `unwrap_or` calls. In that case,
suggest the use of `or_default`, which is more idiomatic.
Note that even with this change, `or_insert_with(T::default)` calls
aren't detected as candidates for `or_default()`, in the same manner
that currently `unwrap_or_else(T::default)` calls aren't detected as
candidates for `unwrap_or_default()`.
Also, as a nearby cleanup, change `KNOW_TYPES` from `static` to `const`,
since as far as I understand it's preferred (should Clippy have a lint
for that?).
Fixes#3812.
fix wording for `derivable_impls`
While looking at the explanation as to why this lint was not automatically applicable, found the explanation a bit clunky grammatically.
Feel free to close if you consider the wording was correct in the first place.
changelog: none
Fixes#9351.
Note that this commit reworks that fix for #9317. The change
is to check that the type implements `AsRef<str>` before regarding
`to_string` as an equivalent of `to_owned`. This was suggested
by Jarcho in the #9317 issue comments.
The benefit of this is that it moves some complexity out of
`check_other_call_arg` and simplifies the module as a whole.
Fix `mut_mutex_lock` when Mutex is behind immutable deref
I *think* the problem here is the `if let ty::Ref(_, _, Mutability::Mut) = cx.typeck_results().expr_ty(recv).kind()` line tries to check if the `Mutex` can be mutably borrowed (there already is a test for `Arc<Mutex<_>>`), but gets bamboozled by the `&mut Arc` indirection. And I *think* checking the deref-adjustment to filter immutable-adjust (the deref through the `Arc`, starting from `&mut Arc`) is the correct fix.
Fixes#9415
changelog: Fix `mut_mutex_lock` when Mutex is behind immutable deref
Don't use `hir_ty_to_ty` in `result_large_err`
fixes#9414
This occurs starting with 2022-09-01. I checked that this does fix the ICE on rust-lang/rust@9353538. Not sure which pr caused the late-bound region to leak through `hir_ty_to_ty`.
changelog: None
Fix `suboptimal_float` not linting on `{const}.powf({const})`
There used to be an early return if the receiver was an effective const but the method was not linted, not taking into account later cases where the receiver and the arguments are both effective consts for different methods. Removed the early return.
Fixes#9402Fixes#9201
changelog: Fix `suboptimal_flops`, `imprecise_flops` not linting on `{const}.powf({const})` et al
Fix the emission order of `trait_duplication_in_bounds`
Makes the lint emit in source order rather than whatever order the hash map happens to be in. This is currently blocking the sync into rustc.
changelog: None
Fix missing parens in `suboptimal_flops` suggestion
Fixes#9391. The problem is simple enough, I didn't check if the same problem occurs elsewhere, though.
changelog: fix missing parenthesis in `suboptimal_flops` suggestion
Ignore `match_like_matches_macro` when there is comment
Closes#9164
changelog: [`match_like_matches_macro`] is ignored when there is some comment inside the match block.
Also add `span_contains_comment` util to check if given span contains comments.
Implemented `suspicious_to_owned` lint to check if `to_owned` is called on a `Cow`
changelog: Add lint ``[`suspicious_to_owned`]``
-----------------
Hi,
posting this unsolicited PR as I've been burned by this issue :)
Being unsolicited, feel free to reject it or reassign a different lint level etc.
This lint checks whether `to_owned` is called on `Cow<'_, _>`. This is done because `to_owned` is very similarly named to `into_owned`, but the effect of calling those two methods is completely different (one makes the `Cow::Borrowed` into a `Cow::Owned`, the other just clones the `Cow`). If the cow is then passed to code for which the type is not checked (e.g. generics, closures, etc.) it might slip through and if the cow data is coming from an unsafe context there is the potential for accidentally cause undefined behavior.
Even if not falling into this painful case, there's really no reason to call `to_owned` on a `Cow` other than confusing people reading the code: either `into_owned` or `clone` should be called.
Note that this overlaps perfectly with `implicit_clone` as a warning, but `implicit_clone` is classified pedantic (while the consequences for `Cow` might be of a wider blast radius than just pedantry); given the overlap, I set-up the lint so that if `suspicious_to_owned` triggers `implicit_clone` will not trigger. I'm not 100% sure this is done in the correct way (I tried to copy what other lints were doing) so please provide feedback on it if it isn't.
### Checklist
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
This is done because `to_owned` is very similarly named to `into_owned`, but the
effect of calling those two methods is completely different. This creates
confusion (stemming from the ambiguity of the 'owned' term in the context of
`Cow`s) and might not be what the writer intended.
new lint
This fixes#6576
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
---
changelog: add [`multi_assignments`] lint
Replace `contains_ty(..)` with `Ty::contains(..)`
This removes some code we don't need and the method syntax is
also more readable IMO.
changelog: none
feat(fix): Do not lint if the target code is inside a loop
close#8753
we consider the following code.
```rust
fn main() {
let vec = vec![1];
let w: Vec<usize> = vec.iter().map(|i| i * i).collect(); // <- once.
for i in 0..2 {
let _ = w.contains(&i);
}
}
```
and the clippy will issue the following warning.
```rust
warning: avoid using `collect()` when not needed
--> src/main.rs:3:51
|
3 | let w: Vec<usize> = vec.iter().map(|i| i * i).collect();
| ^^^^^^^
...
6 | let _ = w.contains(&i);
| -------------- the iterator could be used here instead
|
= note: `#[warn(clippy::needless_collect)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_collect
help: check if the original Iterator contains an element instead of collecting then checking
|
3 ~
4 |
5 | for i in 0..2 {
6 ~ let _ = vec.iter().map(|i| i * i).any(|x| x == i);
```
Rewrite the code as indicated.
```rust
fn main() {
let vec = vec![1];
for i in 0..2 {
let _ = vec.iter().map(|i| i * i).any(|x| x == i); // <- execute `map` every loop.
}
}
```
this code is valid in the compiler, but, it is different from the code before the rewrite.
So, we should not lint, If `collect` is outside of a loop.
Thank you in advance.
---
changelog: Do not lint if the target code is inside a loop in `needless_collect`
Lint `collapsible_str_replace`
fixes#6651
```
changelog: [`collapsible_str_replace`]: create new lint `collapsible_str_replace`
```
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[ ] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
Rework `only_used_in_recursion`
fixes#8782fixes#8629fixes#8560fixes#8556
This is a complete rewrite of the lint. This loses some capabilities of the old implementation. Namely the ability to track through tuple and slice patterns, as well as the ability to trace through assignments.
The two reported bugs are fixed with this. One was caused by using the name of the method rather than resolving to the `DefId` of the called method. The second was cause by using the existence of a cycle in the dependency graph to determine whether the parameter was used in recursion even though there were other ways to create a cycle in the graph.
Implementation wise this switches from using a visitor to walking up the tree from every use of each parameter until it has been determined the parameter is used for something other than recursion. This is likely to perform better as it avoids walking the entire function a second time, and it is unlikely to walk up the HIR tree very much. Some cases would perform worse though.
cc `@buttercrab`
changelog: Scale back `only_used_in_recursion` to fix false positives
changelog: Move `only_used_in_recursion` back to `complexity`
Enhance `needless_borrow` to consider trait implementations
The proposed enhancement causes `needless_borrow` to suggest removing `&` from `&e` when `&e` is an argument position requiring trait implementations, and `e` implements the required traits. Example:
```
error: the borrowed expression implements the required traits
--> $DIR/needless_borrow.rs:131:51
|
LL | let _ = std::process::Command::new("ls").args(&["-a", "-l"]).status().unwrap();
| ^^^^^^^^^^^^^ help: change this to: `["-a", "-l"]`
```
r? `@Jarcho`
changelog: Enhance `needless_borrow` to consider trait implementations
unwrap_used and expect_used: trigger on uses of their _err variants
changelog: [`unwrap_used`]: lint uses of `unwrap_err`
changelog: [`expect_used`]: lint uses of `expect_err`
fixes#9331
`transmute_undefined_repr` fix
changelog: Don't lint `transmute_undefined_repr` when the the first field of a `repr(C)` type is compatible with the other type
suggest map_or in case_sensitive_file_extension_comparisons
changelog: [`case_sensitive_file_extension_comparisons `]: updated suggestion in the example to use `map_or`
Currently, case_sensitive_file_extension_comparisons suggests using `map(..).unwrap_or(..)` which trips up the `map_unwrap_or` lint. This updates the suggestion to use `map_or`.
Fix [`non_ascii_literal`] in tests
changelog: Don't lint [`non_ascii_literal`] when using non-ascii comments in tests
changelog: Don't lint [`non_ascii_literal`] when `allow`ed on tests
closes: #7739closes: #8263
Currently, case_sensitive_file_extension_comparisons suggests using
`map(..).unwrap_or(..)` which trips up `map_unwrap_or`. This updates
the suggestion to use map_or.
Add new lint [`positional_named_format_parameters`]
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Add new lint [`positional_named_format_parameters`] to warn when named parameters in format strings are used as positional arguments.
- Rename `ast::Lit::token` as `ast::Lit::token_lit`, because its type is
`token::Lit`, which is not a token. (This has been confusing me for a
long time.)
reasonable because we have an `ast::token::Lit` inside an `ast::Lit`.
- Rename `LitKind::{from,to}_lit_token` as
`LitKind::{from,to}_token_lit`, to match the above change and
`token::Lit`.
Fix if_let_mutex not checking Mutexes behind refs
Fixes#9193
We can always peel references because we are looking for a method-call, for which autoderef applies.
---
changelog: [`if_let_mutex`]: detect calls to `Mutex::lock()` if mutex is behind a ref
changelog: [`if_let_mutex`]: Add labels to the two instances of the same Mutex that will deadlock
Visit attributes in more places.
This adds 3 loosely related changes (I can split PRs if desired):
- Attribute checking on pattern struct fields.
- Attribute checking on struct expression fields.
- Lint level visiting on pattern struct fields, struct expression fields, and generic parameters.
There are still some lints which ignore lint levels in various positions. This is a consequence of how the lints themselves are implemented. For example, lint levels on associated consts don't work with `unused_braces`.
Add lint recommending using `std::iter::once` and `std::iter::empty`
```
changelog: [`iter_once`]: add new lint
changelog: [`iter_empty`]: add new lint
```
fixes#9186
- \[ ] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
[lint_naming]: https://rust-lang.github.io/rfcs/0344-conventions-galore.html#lints
The lint doesn't really follow the naming conventions. I don't have any better idea so I'm open to suggestions.
Extend `if_then_some_else_none` to also suggest `bool::then_some`
Closes#9094.
changelog: Extend `if_then_some_else_none` to also suggest `bool::then_some`
Add partialeq_to_none lint
Initial implementation of #9275, adding lint `partialeq_to_none`. This is my first time working on `clippy`, so please review carefully.
I'm unsure especially about the `Sugg`, as it covers the entire `BinOp`, instead of just covering one of the sides and the operator (see the multi-line example). I was unsure if pinpointing the suggestion wouldn't be brittle...
changelog: [`PARTIALEQ_TO_NONE`]: Initial commit
`explicit_auto_deref` changes
fixes#9123fixes#9109fixes#9143fixes#9101
This avoid suggesting code which hits a rustc bug. Basically `&{x}` won't use auto-deref if the target type is `Sized`.
changelog: Don't suggest using auto deref for block expressions when the target type is `Sized`
changelog: Include the borrow in the suggestion for `explicit_auto_deref`
changelog: Don't lint `explicit_auto_deref` on `dyn Trait` return
changelog: Don't lint `explicit_auto_deref` when other adjustments are required
changelog: Lint `explicit_auto_deref` in implicit return positions for closures
More proc-macro detection
fixes#6514fixes#8683fixes#6858fixes#6594
This is a more general way of checking if an expression comes from a macro and could be trivially applied to other lints. Ideally this would be fixed in rustc's proc-macro api, but I don't see that happening any time soon.
changelog: FPs: [`unit_arg`] [`default_trait_access`] [`missing_docs_in_private_items`]: No longer trigger in code generated from proc-macros.
move [`assertions_on_result_states`] to restriction
"Backports" the first commit of https://github.com/rust-lang/rust-clippy/pull/9273, so that the lint doesn't go into beta as a warn-by-default lint.
The other changes in the linked PR can ride the train as usual.
r? ``@xFrednet`` (only Clippy changes, so we don't need to bother compiler people)
---
For Clippy:
changelog: none
Always include a position span in `rustc_parse_format::Argument`
Moves the spans from the `Position` enum to always be included in the `Argument` struct. Doesn't make any changes to use it in rustc, but it will be useful for some upcoming Clippy lints
Fix suggestions for `async` closures in redundant_closure_call
Fixes#9052
changelog: Fix suggestions given by [`redundant_closure_call`] for async closures
- only compare where predicates to trait bounds when generating where
clause specific message to fix#9151
- use comparable_trait_ref to account for trait bound generics to fix#8757
Move [`assertions_on_result_states`] to restriction
Close#9263
This lint causes regression on readability of code and log output. And printing runtime values is not particularly useful for majority of tests which should be reproducible.
changelog: Move [`assertions_on_result_states`] to restriction and don't lint it for unit type
Signed-off-by: tabokie <xy.tao@outlook.com>
unwrap_used: Don't recommend using `expect` when the `expect_used` lint is not allowed
Fixes#9222
```
changelog: [`unwrap_used`]: Don't recommend using `expect` when the `expect_used` lint is not allowed
```
From 72 bytes to 12 bytes (on x86-64).
There are two parts to this:
- Changing various source code offsets from 64-bit to 32-bit. This is
not a problem because the rest of rustc also uses 32-bit source code
offsets. This means `Token` is no longer `Copy` but this causes no
problems.
- Removing the `RawStrError` from `LiteralKind`. Raw string literal
invalidity is now indicated by a `None` value within
`RawStr`/`RawByteStr`, and the new `validate_raw_str` function can be
used to re-lex an invalid raw string literal to get the `RawStrError`.
There is one very small change in behaviour. Previously, if a raw string
literal matched both the `InvalidStarter` and `TooManyHashes` cases,
the latter would override the former. This has now changed, because
`raw_double_quoted_string` now uses `?` and so returns immediately upon
detecting the `InvalidStarter` case. I think this is a slight
improvement to report the earlier-detected error, and it explains the
change in the `test_too_many_hashes` test.
The commit also removes a couple of comments that refer to #77629 and
say that the size of these types don't affect performance. These
comments are wrong, though the performance effect is small.
Rollup of 5 pull requests
Successful merges:
- #99311 (change maybe_body_owned_by to take local def id)
- #99862 (Improve type mismatch w/ function signatures)
- #99895 (don't call type ascription "cast")
- #99900 (remove some manual hash stable impls)
- #99903 (Add diagnostic when using public instead of pub)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
The expect_used lint is allow-by-default, so it would be better to show the case where this is enabled.
Co-authored-by: Takayuki Nakata <f.seasons017@gmail.com>
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
Generate correct suggestion with named arguments used positionally
Address issue #99265 by checking each positionally used argument
to see if the argument is named and adding a lint to use the name
instead. This way, when named arguments are used positionally in a
different order than their argument order, the suggested lint is
correct.
For example:
```
println!("{b} {}", a=1, b=2);
```
This will now generate the suggestion:
```
println!("{b} {a}", a=1, b=2);
```
Additionally, this check now also correctly replaces or inserts
only where the positional argument is (or would be if implicit).
Also, width and precision are replaced with their argument names
when they exists.
Since the issues were so closely related, this fix for issue #99265
also fixes issue #99266.
Fixes#99265Fixes#99266
Read and use deprecated configuration (as well as emitting a warning)
Original change written by `@flip1995` I've simply rebased to master and fixed up the formatting/tests. This change teaches the configuration parser which config key replaced a deprecated key and attempts to populate the latter from the former. If both keys are provided this fails with a duplicate key error (rather than attempting to guess which the user intended).
Currently this on affects `cyclomatic-complexity-threshold` -> `cognitive-complexity-threshold` but will also be used in #8974 to handle `blacklisted-names` -> `disallowed-names`.
```
changelog: deprecated configuration keys are still applied as if they were provided as their non-deprecated name.
```
- [x] `cargo test` passes locally
- [x] Run `cargo dev fmt`
Address issue #99265 by checking each positionally used argument
to see if the argument is named and adding a lint to use the name
instead. This way, when named arguments are used positionally in a
different order than their argument order, the suggested lint is
correct.
For example:
```
println!("{b} {}", a=1, b=2);
```
This will now generate the suggestion:
```
println!("{b} {a}", a=1, b=2);
```
Additionally, this check now also correctly replaces or inserts
only where the positional argument is (or would be if implicit).
Also, width and precision are replaced with their argument names
when they exists.
Since the issues were so closely related, this fix for issue #99265
also fixes issue #99266.
Fixes#99265Fixes#99266
Add new lint `obfuscated_if_else`
part of #9100, additional commits could make it work with `then` and `unwrap_or_else` as well
changelog: Add new lint `obfuscated_if_else`
unused_self: respect avoid-breaking-exported-api
```
changelog: [`unused_self`]: Now respects the `avoid-breaking-exported-api` config option
```
Fixes#9195.
I mostly copied the implementation from `unnecessary_wraps`, since I don't have much understanding of rustc internals.
[`box_collection`]: raise warn for all std collections
So far, only [`Vec`, `String`, `HashMap`] were considered.
Extend collection checklist for this lint with:
- `HashSet`
- `VecDeque`
- `LinkedList`
- `BTreeMap`
- `BTreeSet`
- `BinaryHeap`
changelog: [`box_collection`]: raise warn for all std collections
Move format_push_string to restriction
Fixes#9077 (kinda) by moving the lint to the restriction group. As I noted in that issue, I think the suggested change is too much and as the OP of the issue points out, the ramifications of the change are not necessarily easily understood. As such I don't think the lint should be enabled by default.
changelog: [`format_push_string`]: moved to restriction (see #9077).
Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
Always create elided lifetime parameters for functions
Anonymous and elided lifetimes in functions are sometimes (async fns) --and sometimes not (regular fns)-- desugared to implicit generic parameters.
This difference of treatment makes it some downstream analyses more complicated to handle. This step is a pre-requisite to perform lifetime elision resolution on AST.
There is currently an inconsistency in the treatment of argument-position impl-trait for functions and async fns:
```rust
trait Foo<'a> {}
fn foo(t: impl Foo<'_>) {} //~ ERROR missing lifetime specifier
async fn async_foo(t: impl Foo<'_>) {} //~ OK
fn bar(t: impl Iterator<Item = &'_ u8>) {} //~ ERROR missing lifetime specifier
async fn async_bar(t: impl Iterator<Item = &'_ u8>) {} //~ OK
```
The current implementation reports "missing lifetime specifier" on `foo`, but **accepts it** in `async_foo`.
This PR **proposes to accept** the anonymous lifetime in both cases as an extra generic lifetime parameter.
This change would be insta-stable, so let's ping t-lang.
Anonymous lifetimes in GAT bindings keep being forbidden:
```rust
fn foo(t: impl Foo<Assoc<'_> = Bar<'_>>) {}
^^ ^^
forbidden ok
```
I started a discussion here: https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Anonymous.20lifetimes.20in.20universal.20impl-trait/near/284968606
r? ``@petrochenkov``
fix [`manual_flatten`] help texts order
fixes #8948
Whenever suggestion for this lint does not fit in one line,
legacy solution has some unexpected/unhandled behavior:
lint will then generate two help messages which seem to be shown in the wrong order.
The second help message in that case will contain the suggestion.
The first help message always refers to a suggestion message,
and **it should adapt** depending on the location of the suggestion:
- inline suggestion within the error/warning message
- suggestion separated into a second help text
This is my first contribution here, so I hope I didn't miss anything for creating this PR.
changelog: fix [`manual_flatten`] help texts order
Whenever suggestion for this lint does not fit in one line,
lint will generate two help messages. The second help message
will always contain the suggestion.
The first help message refers to suggestion message,
and it should adapt depending on the location of the suggestion:
- inline suggestion within the error/warning message
- suggestion separated into second help text
Add `repeated_where_clause_or_trait_bound` lint
I thought I would try and scratch my own itch for #8674.
1. Is comparing the `Res` the correct way for ensuring we have the same trait?
2. Is there a way to get the spans for the bounds and clauses for suggestions?
I tried to use `GenericParam::bounds_span_for_suggestions` but it only gave me an empty span at the end of the spans.
I tried `WhereClause::span_for_predicates_or_empty_place` and it included the comma.
3. Is there a simpler way to get the trait names? I have used the spans of the traits because I didn't see a way to get it off the `Res` or `Def`.
changelog: Add ``[`repeated_where_clause_or_trait_bound`]`` lint.
change applicability type to MaybeIncorrect in `explicit_counter_loop`
close#9013
This PR changes applicability type to `MaybeIncorrect`, because the suggestion is not `MachineApplicable`.
changelog: change applicability type to MaybeIncorrect in `explicit_counter_loop`
Fixes for `branches_sharing_code`
fixes#7198fixes#7452fixes#7555fixes#7589
changelog: Don't suggest moving modifications to locals used in any of the condition expressions in `branches_sharing_code`
changelog: Don't suggest moving anything after a local with a significant drop in `branches_sharing_code`
Fix span for or_fun_call
Closes#9033
changelog: [`or_fun_call`]: span points to the `unwrap_or` only instead of through the entire method chain expression
* Don't suggest moving modifications to locals used in any of the condition expressions
* Don't suggest moving anything after a local with a significant drop
Simplify if let statements
fixes: #8288
---
changelog: Allowing [`qustion_mark`] lint to check `if let` expressions that immediatly return unwrapped value
Lint simple expressions in `manual_filter_map`, `manual_find_map`
changelog: Lint simple expressions in [`manual_filter_map`], [`manual_find_map`]
The current comparison rules out `.find(|a| a.is_some()).map(|b| b.unwrap())` because `a` being a reference can effect more complicated expressions, this adds a simple check for that case and adds the necessary derefs
There's some overlap with `option_filter_map` so `lint_filter_some_map_unwrap` now returns a `bool` to indicate it linted
Make MIR basic blocks field public
This makes it possible to mutably borrow different fields of the MIR
body without resorting to methods like `basic_blocks_local_decls_mut_and_var_debug_info`.
To preserve validity of control flow graph caches in the presence of
modifications, a new struct `BasicBlocks` wraps together basic blocks
and control flow graph caches.
The `BasicBlocks` dereferences to `IndexVec<BasicBlock, BasicBlockData>`.
On the other hand a mutable access requires explicit `as_mut()` call.
Finishing touches for `#[expect]` (RFC 2383)
This PR adds documentation and some functionality to rustc's lint passes, to manually fulfill expectations. This is needed for some lints in Clippy. Hopefully, it should be one of the last things before we can move forward with stabilizing this feature.
As part of this PR, I've also updated `clippy::duplicate_mod` to showcase how this new functionality can be used and to ensure that it works correctly.
---
changelog: [`duplicate_mod`]: Fixed lint attribute interaction
r? `@wesleywiser`
cc: https://github.com/rust-lang/rust/issues/97660, https://github.com/rust-lang/rust/issues/85549
And I guess that's it. Here have a magical unicorn 🦄
the two loops did practically the same, only the type were different (&&
vs &), so I used `copied` to convert `&&` and chained them together.
Instead of parsing the trait info manually, I use the already provided
method `get_trait_info_from_bound`.
Also, instead of using manual string writing, I used `join` by
`itertools`.
Fix `undocumented_unsafe_blocks` in closures
fixes#9114
changelog: Fix `undocumented_unsafe_blocks` not checking for comments before the start of a closure
Add `invalid_utf8_in_unchecked`
changelog: Add [`invalid_utf8_in_unchecked`]
closes: #629
Don't know how useful of a lint this is, just saw this was a really old issue 😄.
Correct lint version for `format_push_string`
Closes#9081
changelog: none
IDK what else to say. Look I can draw an ascii penguin =D:
```
(^v^)
<( )>
w w
```
Add details about how significant drop in match scrutinees can cause deadlocks
Adds more details about how a significant drop in a match scrutinee can cause a deadlock and include link to documentation.
changelog: Add more details to significant drop lint to explicitly show how temporaries in match scrutinees can cause deadlocks.
Fix `#[expect]` for most clippy lints
This PR fixes most `#[expect]` - lint interactions listed in rust-lang/rust#97660. [My comment in the issue](https://github.com/rust-lang/rust/issues/97660#issuecomment-1147269504) shows the current progress (Once this is merged). I plan to work on `duplicate_mod` and `multiple_inherent_impl` and leave the rest for later. I feel like stabilizing the feature is more important than fixing the last few nits, which currently also don't work with `#[allow]`.
---
changelog: none
r? `@Jarcho`
cc: rust-lang/rust#97660
Add lint `explicit_auto_deref` take 2
fixes: #234fixes: #8367fixes: #8380
Still things to do:
* ~~This currently only lints `&*<expr>` when it doesn't trigger `needless_borrow`.~~
* ~~This requires a borrow after a deref to trigger. So `*<expr>` changing `&&T` to `&T` won't be caught.~~
* The `deref` and `deref_mut` trait methods aren't linted.
* Neither ~~field accesses~~, nor method receivers are linted.
* ~~This probably shouldn't lint reborrowing.~~
* Full slicing to deref should probably be handled here as well. e.g. `&vec[..]` when just `&vec` would do
changelog: new lint `explicit_auto_deref`
try reading rust-version from Cargo.toml
Cargo.toml can contain a field `rust-version`, that acts like a MSRV of
clippy.toml file: https://doc.rust-lang.org/cargo/reference/manifest.html#the-rust-version-field
This will try to read that field and use it, if the clippy.toml config
has no `msrv` entry
changelog: respect `rust-version` from `Cargo.toml`
closes#8746closes#7765
`trivially_copy_pass_by_ref` fixes
fixes#5953fixes#2961
The fix for #5953 is overly aggressive, but the suggestion is so bad that it's worth the false negatives. Basically three things together:
* It's not obviously wrong
* It compiles
* It may actually work when tested
changelog: Don't lint `trivially_copy_pass_by_ref` when unsafe pointers are used.
changelog: Better track lifetimes when linting `trivially_copy_pass_by_ref`.
add [`manual_find`] lint for function return case
part of the implementation discussed in #7143
changelog: add [`manual_find`] lint for function return case
feat(new lint): new lint `manual_retain`
close#8097
This PR is a new lint implementation.
This lint checks if the `retain` method is available.
Thank you in advance.
changelog: add new ``[`manual_retain`]`` lint
Suggest `pointer::cast` when possible in `transmute_ptr_to_ref`
fixes#8924
changelog: Suggest casting the pointer for any type containing lifetimes in `transmute_ptr_to_ref`.
changelog: Suggest `pointer::cast` when possible in `transmute_ptr_to_ref`.
enum_variant_names should ignore when all prefixes are _
close#9018
When Enum prefix is only an underscore, we should not issue warnings.
changelog: fix false positive in enum_variant_names
Lint `[single_match]` on `Option` matches
fixes#8928
changelog: did some cleanup of the logic for ``[`single_match`]`` and ``[`single_match_else`]`` which fixes the bug where `Option` matches were not linted unless a wildcard was used for one of the arms.
ignore item in `thread_local!` macro
close#8493
This PR ignores `thread_local` macro in `declare_interior_mutable_const`.
changelog: ignore `thread_local!` macro in `declare_interior_mutable_const`
Fix `extra_unused_lifetimes` false positive
This PR fixes#9014.
I confirmed the FP on the `crates.io` source as `@JohnTitor` mentioned, and confirmed that the FP is no longer present following this change.
I did not include a test in this PR because I think constructing one would be complicated, and the fix is pretty simple. But please let me know if this is unacceptable.
changelog: fix `extra_unused_lifetimes` FP
add vec.capacity() to [`slow_vec_initialization`] detection
fix#8800
for example
```rust
let mut vec1 = Vec::with_capacity(len);
vec1.resize(vec1.capacity(), 0);
let mut vec2 = Vec::with_capacity(len);
vec2.extend(repeat(0).take(vec2.capacity()));
```
will trigger the lint
---
changelog: add `vec.capacity()` to [`slow_vec_initialization`] detection
