use partition_point instead of binary_search when looking up source lines
In local benchmarks this results in 0.4% fewer cycles in a critical sequential section when compiling libcore.
Add armv5te-none-eabi and thumbv5te-none-eabi targets
Creates two new Tier 3 targets, `armv5te-none-eabi` and `thumbv5te-none-eabi`. They are for the same target architecture (armv5te), but one defaults to the A32 instruction set and the other defaults to T32. Based on the existing `armv4t-none-eabi` and `thumbv4t-none-eabi` targets.
My particular use case for these targets is Nintendo DS homebrew, but they should be usable for any armv5te system.
Going through the Tier 3 target policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
That will be me.
> Targets must use naming consistent with any existing targets.
Naming is consistent with previous targets.
>> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility.
No ambiguity here.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Doesn't create any legal issues.
>> The target must not introduce license incompatibilities.
This doesn't introduce any new licenses.
>> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Yep.
>> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
No new license requirements.
>> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries.
Everything this uses is FOSS, no proprietary required.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
OK.
>> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
OK.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This is a bare-metal target with only support for `core` (and `alloc`, if the user provides an allocator).
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation has been added.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
OK.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
OK.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
This doesn't break any other targets.
>> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
No unnecessary unconditional features here.
a fn pointer doesn't implement `Fn`/`FnMut`/`FnOnce` if its return type isn't sized
I stumbled upon #83915 which hasn't received much attention recently, and I wanted to revive it since this is one existing soundness hole that seems pretty easy to fix.
I'm not actually sure that the [alternative approach described here](https://github.com/rust-lang/rust/pull/83915#issuecomment-823643322) is sufficient, given the `src/test/ui/function-pointer/unsized-ret.rs` example I provided below. Rebasing the branch mentioned in that comment and testing that UI test, it seems that we actually end up only observing that `str: !Sized` during monomorphization, whereupon we ICE. Even if we were to fix that ICE, ideally we'd be raising an error that a fn pointer is being used badly during _typecheck_ instead of monomorphization, hence adapting the original approach in #83915.
I am happy to close this if people would prefer we rebase the original PR and land that -- I am partly opening to be annoying and get people thinking about this unsoundness again ❤️😸
cc: `@estebank` and `@nikomatsakis`
r? types
Here's a link to the thread: https://rust-lang.zulipchat.com/#narrow/stream/144729-t-types/topic/PR.20.2383915/near/235421351 for more context.
Optimize `array::IntoIter`
`.into_iter()` on arrays was slower than it needed to be (especially compared to slice iterator) since it uses `Range<usize>`, which needs to handle degenerate ranges like `10..4`.
This PR adds an internal `IndexRange` type that's like `Range<usize>` but with a safety invariant that means it doesn't need to worry about those cases -- it only handles `start <= end` -- and thus can give LLVM more information to optimize better.
I added one simple demonstration of the improvement as a codegen test.
(`vec::IntoIter` uses pointers instead of indexes, so doesn't have this problem, but that only works because its elements are boxed. `array::IntoIter` can't use pointers because that would keep it from being movable.)
std: use `sync::RwLock` for internal statics
Since `sync::RwLock` is now `const`-constructible, it can be used for internal statics, removing the need for `sys_common::StaticRwLock`. This adds some extra allocations on platforms which need to box their locks (currently SGX and some UNIX), but these will become unnecessary with the lock improvements tracked in #93740.
Improve error for when query is unsupported by crate
This is an improvement to the error message mentioned on #101666. It seems like a good idea to also add [this link to the rustc-dev-guide](https://rustc-dev-guide.rust-lang.org/query.html), if explaining the query system in detail is a concern here, but I'm unsure if there is any restrictions on adding links to error messages.
feat: Display the value of enum variant on hover
fixes#12955
This PR adds const eval support for enums, as well as showing their value on hover, just as consts currently have.
I developed these two things at the same time, but I've realized now that they are separate. However since the hover is just a 10 line change (not including tests), I figured I may as well put them in the same PR. Though if you want them split up into "enum const eval support" and "show enum variant value on hover", I think that's reasonable too.
Since this adds const eval support for enums this also allows consts that reference enums to have their values computed now too.
The const evaluation itself is quite rudimentary, it doesn't keep track of the actual type of the enum, but it turns out that Rust doesn't actually either, and `E::A as u8` is valid regardless of the `repr` on `E`.
It also doesn't really care about what expression the enum variant contains, it could for example be a string, despite that not being allowed, but I guess it's up to the `cargo check` diagnostics to inform of such issues anyway?
Ensure at least one trait bound in `TyKind::DynTy`
One would expect `TyKind::DynTy` to have at least one trait bound, but we may produce a dyn type with no trait bounds at all. This patch prevents it by returning `TyKind::Error` in such cases.
An "empty" dyn type would have caused panic during method resolution without #13257. Although already fixed, I think an invariant to never produce such types would help prevent similar problems in the future.
Distribute json doc
# Overview
We add a new component, `rust-json-docs`, to distribute the JSON version of rustdoc's output for public compiler crates (i.e. `std`, `alloc`, `proc_macro`, `core` and `test`).
As discussed in #101383, we do not bundle this up as part of the existing `rust-docs` component since `rustdoc`'s JSON format is still unstable.
# Open questions / Doubts
I tried my best, but I never touched this codebase and I couldn't find much documentation on how `dist` works - I pattern-matched existing code, which might have led to some non-sensical choices in the eyes of people more familiar with the codebase. In particular, I am not sure if my choice of adding a new config flag is appropriate or if the decision to build/not build the JSON docs is more appropriately gated by one of the existing flags.
Any suggestion is more than welcome.
Closes#101383
Add a new configuration settings to set env vars when running cargo, rustc, etc. commands: cargo.extraEnv and checkOnSave.extraEnv
It can be extremely useful to be able to set environment variables when rust-analyzer is running various cargo or rustc commands (such as `cargo check`, `cargo --print cfg` or `cargo metadata`): users may want to set custom `RUSTFLAGS`, change `PATH` to use a custom toolchain or set a different `CARGO_HOME`.
There is the existing `server.extraEnv` setting that allows env vars to be set when the rust-analyzer server is launched, but using this as the recommended mechanism to also configure cargo/rust has some drawbacks:
- It convolutes configuring the rust-analyzer server with configuring cargo/rustc (one may want to change the `PATH` for cargo/rustc without affecting the rust-analyzer server).
- The name `server.extraEnv` doesn't indicate that cargo/rustc will be affected but renaming it to `cargo.extraEnv` doesn't indicate that the rust-analyzer server would be affected.
- To make the setting useful, it needs to be dynamically reloaded without requiring that the entire extension is reloaded. It might be possible to do this, but it would require the client communicating to the server what the overwritten env vars were at first launch, which isn't easy to do.
This change adds two new configuration settings: `cargo.extraEnv` and `checkOnSave.extraEnv` that can be used to change the environment for the rust-analyzer server after launch (thus affecting any process that rust-analyzer invokes) and the `cargo check` command respectively. `cargo.extraEnv` supports dynamic changes by keeping track of the pre-change values of environment variables, thus it can undo changes made previously before applying the new configuration (and then requesting a workspace reload).
Fix add reference action on macros.
Before we were using the range of the corresponding expression node in the macro expanded file, which is obviously incorrect as we are setting the text in the original source.
For some reason, the test I added is failing and I haven't found a way to fix it. Does anyone know why `check_fix` wouldn't work with macros? Getting this error:
```text
thread 'handlers::type_mismatch::tests::test_add_reference_to_macro_call' panicked at 'no diagnostics', crates/ide-diagnostics/src/handlers/type_mismatch.rs:317:9
```
closes#13219
Use memmem when searching for usages in ide-db
We already have this dependency, so there is no reason not to use it as it is generally faster than std in our use case.
