4570: Use Chalk's built-in impls r=matklad a=flodiebold
This contains two changes:
- Chalk has begun adding built-in representations of primitive types; use these in our type conversion logic. There's one somewhat 'iffy' part here, namely references; we don't keep track of lifetimes, but Chalk does, so it will expect a lifetime parameter on references. If we didn't provide that, it could cause crashes in Chalk code that expects the lifetime, so I rather hackily add an (always the same) lifetime placeholder during conversion. I expect that we'll fully switch to using Chalk's types everywhere before we add lifetime support, so I think this is the best solution for now.
- let Chalk know about well-known traits (from lang items), so it can apply its built-in impls.
Before:
```
Total expressions: 181485
Expressions of unknown type: 2940 (1%)
Expressions of partially unknown type: 2884 (1%)
Type mismatches: 901
Inference: 37.821210245s, 0b allocated 0b resident
Total: 53.399467609s, 0b allocated 0b resident
```
After:
```
Total expressions: 181485
Expressions of unknown type: 2923 (1%)
Expressions of partially unknown type: 2879 (1%)
Type mismatches: 734
Inference: 39.157752509s, 0b allocated 0b resident
Total: 54.110767621s, 0b allocated 0b resident
```
(I will start splitting up `chalk.rs` in a separate PR, since it's getting pretty big...)
Co-authored-by: Florian Diebold <flodiebold@gmail.com>
Co-authored-by: Florian Diebold <florian.diebold@freiheit.com>
4571: KISS SourceChange r=matklad a=matklad
The idea behind requiring the label is a noble one, but we are not
really using it consistently anyway, and it should be easy to retrofit
later, should we need it.
bors r+
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
The idea behind requiring the label is a noble one, but we are not
really using it consistently anyway, and it should be easy to retrofit
later, should we need it.
4516: LSP: Two stage initialization r=kjeremy a=kjeremy
Fills in server information.
Derives CodeAction capabilities from the client. If code action literals
are unsupported we fall back to the "simple support" which just sends back
commands (this is already supported in our config). The difference being
that we did not adjust our server capabilities so that if the client was
checking for `CodeActionProvider: "true"` in the response that would have failed.
Part of #144Fixes#4130 (the specific case called out in that issue)
Co-authored-by: kjeremy <kjeremy@gmail.com>
This also changes our handiling of snippet edits on the client side.
`editor.insertSnippet` unfortunately forces indentation, which we
really don't want to have to deal with. So, let's just implement our
manual hacky way of dealing with a simple subset of snippets we
actually use in rust-analyzer
4506: Make `find_path_inner` a query r=matklad a=jonas-schievink
This eliminates the remaining performance problems in the "Implement default members" assist (at least those that I've found).
Closes https://github.com/rust-analyzer/rust-analyzer/issues/4498
Co-authored-by: Jonas Schievink <jonasschievink@gmail.com>
4526: Use a flat play icon instead of the blue emoji with test code lens r=kjeremy a=aloucks
@lnicola
Restores this commit:
55e914a2a1
That was effectively wiped out by this code formatting commit:
dc217bdf903d445256fe
Co-authored-by: Aaron Loucks <aloucks@cofront.net>
Fills in server information.
Derives CodeAction capabilities from the client. If code action literals
are unsupported we fall back to the "simple support" which just sends back
commands (this is already supported in our config). The difference being
that we did not adjust our server capabilities so that if the client was
checking for `CodeActionProvider: "true"` in the response that would have failed.
4501: Querify `importable_locations_in_crate` r=jonas-schievink a=jonas-schievink
This brings the time needed to compute the `add_missing_impl_members` assist down from ~5 minutes to 20 seconds on my test workload (which is editing within an impl of a MIR [`MutVisitor`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/mir/visit/trait.MutVisitor.html))
cc #4498
Co-authored-by: Jonas Schievink <jonasschievink@gmail.com>
4497: Create LowerCtx on the fly r=matklad a=edwin0cheng
Previously we create `LowerCtx` at the beginning of lowering, however, the hygiene content is in fact changing between macro expression expanding.
This PR change it to create the `LowerCtx` on the fly to fix above bug.
However, #4465 is not fixed by this PR, the goto-def is still not work yet. It only fixed the infer part.
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
4493: Provide builtin impls of Fn traits for fn-pointers r=flodiebold a=hban
Meant to be, but isn't actually a fix for #2880.
Consider this snippet:
```rust
use std::marker::PhantomData;
use std::ops::Deref;
struct Lazy<T, F/* = fn() -> T*/>(F, PhantomData<T>);
impl<T, F> Lazy<T, F> {
pub fn new(f: F) -> Lazy<T, F> {
Lazy(f, PhantomData)
}
}
impl<T, F: FnOnce() -> T> Deref for Lazy<T, F> {
type Target = T;
fn deref(&self) -> &T { todo!() }
}
fn test() {
let lazy1: Lazy<u32, _> = Lazy::new(|| 0u32);
let r1 = lazy1.to_string();
fn make_u32_fn() -> u32 { todo!() }
let make_u32_fn_ptr: fn() -> u32 = make_u32_fn;
let lazy2: Lazy<u32, _> = Lazy::new(make_u32_fn_ptr);
let r2 = lazy2.to_string();
}
```
* On current master:
* When type default is commented-out, `r1` is correctly inferred, `r2` in _{unknown}_.
* When type default is not commented-out, both `r1` and `r2` are _{unknown}_.
* With this PR:
* When type default is commented-out, both `r1` and `r2` are correctly inferred.
* When type default is not commented-out, both `r1` and `r2` are _{unknown}_.
Well, it's a improvement at least. I guess this thing with type defaults is a different problem.
I also tried add Fn impls for fn items, but wasn't successful. So this PR only adds those impls for fn pointers.
Co-authored-by: Hrvoje Ban <hban@users.noreply.github.com>
4489: Memory allocation optimization r=matklad a=simonvandel
I did some profiling using DHAT, and this was what I could easily optimize without much knowledge of the codebase.
This speeds up analysis-stats on rust-analyser by ~4% on my local machine.
**Benchmark**
➜ rust-analyzer-base git:(master) hyperfine --min-runs=2 '/home/simon/Documents/rust-analyzer/target/release/rust-analyzer analysis-stats .' '/home/simon/Documents/rust-analyzer-base/target/release/rust-analyzer analysis-stats .'
Benchmark #1: /home/simon/Documents/rust-analyzer/target/release/rust-analyzer analysis-stats .
Time (mean ± σ): 49.621 s ± 0.317 s [User: 48.725 s, System: 0.792 s]
Range (min … max): 49.397 s … 49.846 s 2 runs
Benchmark #2: /home/simon/Documents/rust-analyzer-base/target/release/rust-analyzer analysis-stats .
Time (mean ± σ): 51.764 s ± 0.045 s [User: 50.882 s, System: 0.756 s]
Range (min … max): 51.733 s … 51.796 s 2 runs
Summary
'/home/simon/Documents/rust-analyzer/target/release/rust-analyzer analysis-stats .' ran
1.04 ± 0.01 times faster than '/home/simon/Documents/rust-analyzer-base/target/release/rust-analyzer analysis-stats .'
Co-authored-by: Simon Vandel Sillesen <simon.vandel@gmail.com>
