The documentation for `lens.run.enable` states that it only applies
when `lens.enable` is set. However, the config setting whether to show
the Run lens did not check `lens.enable`, so the Run lens would show
even though lenses were disabled.
In the stabilization attempt of `#[unix_sigpipe = "sig_dfl"]`, a concern
was raised related to using a language attribute for the feature: Long
term, we want `fn lang_start()` to be definable by any crate, not just
libstd. Having a special language attribute in that case becomes
awkward.
So as a first step towards towards the next stabilization attempt, this
PR changes the `#[unix_sigpipe = "..."]` attribute to a compiler flag
`-Zon-broken-pipe=...` to remove that concern, since now the language
is not "contaminated" by this feature.
Another point was also raised, namely that the ui should not leak
**how** it does things, but rather what the **end effect** is. The new
flag uses the proposed naming. This is of course something that can be
iterated on further before stabilization.
fix: Tracing span names should match function names
When viewing traces, it's slightly confusing when the span name doesn't match the function name. Ensure the names are consistent.
(It might be worth moving most of these to use `#[tracing::instrument]` so the name can never go stale. `@davidbarsky` suggested that is marginally slower, so I've just done the simple change here.)
When viewing traces, it's slightly confusing when the span name doesn't
match the function name. Ensure the names are consistent.
(It might be worth moving most of these to use #[tracing::instrument]
so the name can never go stale. @davidbarsky suggested that is marginally
slower, so I've just done the simple change here.)
feature: Make generate function assist generate a function as a constructor if the generated function has the name "new" and is an asscociated function.
close#17050
This PR makes `generate function assist` generate a function as a constructor if the generated function has the name "new" and is an asscociated function.
If the asscociate type is a record struct, it generates the constructor like this.
```rust
impl Foo {
fn new() -> Self {
Self { field_1: todo!(), field_2: todo!() }
}
}
```
If the asscociate type is a tuple struct, it generates the constructor like this.
```rust
impl Foo {
fn new() -> Self {
Self(todo!(), todo!())
}
}
```
If the asscociate type is a unit struct, it generates the constructor like this.
```rust
impl Foo {
fn new() -> Self {
Self
}
}
```
If the asscociate type is another adt, it generates the constructor like this.
```rust
impl Foo {
fn new() -> Self {
todo!()
}
}
```
Support hovering limits for adts
Fix#17009
1. Currently, r-a supports limiting the number of struct fields displayed when hovering. This PR extends it to support enum variants and union fields. Since the display of these three (ADTs) is similar, this PR extends 'hover_show_structFields' to 'hover_show_adtFieldsOrVariants'.
2. This PR also resolved the problem that the layout of ADT was not restricted by display limitations when hovering on the Self type.
3. Additionally, this PR changes the default value of display limitations to `10` (instead of the original `null`), which helps users discover this feature.
Make `cargo run` always available for binaries
Previously, items for `cargo test` and `cargo check` would appear as in
the `Select Runnable` quick pick that appears when running
`rust-analyzer: Run`, but `run` would only appear as a runnable if a
`main`` function was selected in the editor. This change adds `cargo
run` as an always available runnable command for binary packages.
This makes it easier to develop cli / tui applications, as now users can
run application from anywhere in their codebase.
chore: add some `tracing` to project loading
I wanted to see what's happening during project loading and if it could be parallelized. I'm thinking maybe, but it's not this PR :)
Try to generate more meaningful names in json converter
I just found out about rust-analyzer json converter, but I think it would be more convenient, if names were more useful, like using the names of the keys.
Let's look at some realistic arbitrary json:
```json
{
"user": {
"address": {
"street": "Main St",
"house": 3
},
"email": "example@example.com"
}
}
```
I think, new generated code is much easier to read and to edit, than the old:
```rust
// Old
struct Struct1{ house: i64, street: String }
struct Struct2{ address: Struct1, email: String }
struct Struct3{ user: Struct2 }
// New
struct Address1{ house: i64, street: String }
struct User1{ address: Address1, email: String }
struct Root1{ user: User1 }
```
Ideally, if we drop the numbers, I can see it being usable just as is (may be rename root)
```rust
struct Address{ house: i64, street: String }
struct User{ address: Address, email: String }
struct Root{ user: User }
```
Sadly, we can't just drop them, because there can be multiple fields (recursive) with the same name, and we can't just easily retroactively add numbers if the name has 2 instances due to parsing being single pass.
We could ignore the `1` and add number only if it's > 1, but I will leave this open to discussion and right now made it the simpler way
In sum, even with numbers, I think this PR still helps in readability
* Added config `runnables.extraTestBinaryArgs` to control the args.
* The default is `--show-output` rather than `--nocapture` to prevent
unreadable output when 2 or more tests fail or print output at once.
* Renamed variables in `CargoTargetSpec::runnable_args()` for clarity.
Fixes <https://github.com/rust-lang/rust-analyzer/issues/12737>.
Instead of using `core::fmt::format` to format panic messages, which may in turn
panic too and cause recursive panics and other messy things, redirect
`panic_fmt` to `const_panic_fmt` like CTFE, which in turn goes to
`panic_display` and does the things normally. See the tests for the full
call stack.
As of #6246, rust-analyzer follows symlinks. This can introduce an
infinite loop if symlinks point to parent directories.
Considering that #6246 was added in 2020 without many bug reports,
this is clearly a rare occurrence. However, I am observing
rust-analyzer hang on projects that have symlinks of the form:
```
test/a_symlink -> ../../
```
Ignore symlinks that only point to the parent directories, as this is
more robust but still allows typical symlink usage patterns.
fix: Replace Just the variable name in Unused Variable Diagnostic Fix
Changes Unused Variable diagnostic to just look at the variable name, not the entire syntax range.
Also added a test for an unused variable in an array destructure.
Closes#17053
It is bitset semantically --- many categorical things can be true about
a reference at the same time.
In parciular, a reference can be a "test" and a "write" at the same
time.
internal : redesign rust-analyzer::config
This PR aims to cover the infrastructural requirements for the `rust-analyzer.toml` ( #13529 ) issue. This means, that
1. We no longer have a single config base. The once single `ConfigData` has been divided into 4 : A tree of `.ratoml` files, a set of configs coming from the client ( this is what was called before the `CrateData` except that now values do not default to anything when they are not defined) , a set of configs that will reflect what the contents of a `ratoml` file defined in user's config directory ( e.g `~/.config/rust-analyzer/.rust-analyzer.toml` and finally a tree root that is populated by default values only.
2. Configs have also been divided into 3 different blocks : `global` , `local` , `client`. The current status of a config may change until #13529 got merged.
Once again many thanks to `@cormacrelf` for doing all the serde work.
internal: improve `TokenSet` implementation and add reserved keywords
The current `TokenSet` type represents "A bit-set of `SyntaxKind`s" as a newtype `u128`.
Internally, the flag for each `SyntaxKind` variant in the bit-set is set as the n-th LSB (least significant bit) via a bit-wise left shift operation, where n is the discriminant.
Edit: This is problematic because there's currently ~121 token `SyntaxKind`s, so adding new token kinds for missing reserved keywords increases the number of token `SyntaxKind`s above 128, thus making this ["mask"](7a8374c162/crates/parser/src/token_set.rs (L31-L33)) operation overflow.
~~This is problematic because there's currently 266 SyntaxKinds, so this ["mask"](7a8374c162/crates/parser/src/token_set.rs (L31-L33)) operation silently overflows in release mode.~~
~~This leads to a single flag/bit in the bit-set being shared by multiple `SyntaxKind`s~~.
This PR:
- Changes the wrapped type for `TokenSet` from `u128` to `[u64; 3]` ~~`[u*; N]` (currently `[u16; 17]`) where `u*` can be any desirable unsigned integer type and `N` is the minimum array length needed to represent all token `SyntaxKind`s without any collisions~~.
- Edit: Add assertion that `TokenSet`s only include token `SyntaxKind`s
- Edit: Add ~7 missing [reserved keywords](https://doc.rust-lang.org/stable/reference/keywords.html#reserved-keywords)
- ~~Moves the definition of the `TokenSet` type to grammar codegen in xtask, so that `N` is adjusted automatically (depending on the chosen `u*` "base" type) when new `SyntaxKind`s are added~~.
- ~~Updates the `token_set_works_for_tokens` unit test to include the `__LAST` `SyntaxKind` as a way of catching overflows in tests.~~
~~Currently `u16` is arbitrarily chosen as the `u*` "base" type mostly because it strikes a good balance (IMO) between unused bits and readability of the generated `TokenSet` code (especially the [`union` method](7a8374c162/crates/parser/src/token_set.rs (L26-L28))), but I'm open to other suggestions or a better methodology for choosing `u*` type.~~
~~I considered using a third-party crate for the bit-set, but a direct implementation seems simple enough without adding any new dependencies. I'm not strongly opposed to using a third-party crate though, if that's preferred.~~
~~Finally, I haven't had the chance to review issues, to figure out if there are any parser issues caused by collisions due the current implementation that may be fixed by this PR - I just stumbled upon the issue while adding "new" keywords to solve #16858~~
Edit: fixes#16858
