# Description
Reuses the existing `Closure` type in `Value::Closure`. This will help
with the span refactoring for `Value`. Additionally, this allows us to
more easily box or unbox the `Closure` case should we chose to do so in
the future.
# User-Facing Changes
Breaking API change for `nu_protocol`.
# Description
These macros simply took a `Span` and a shared reference to `Config` and
returned a Value, for better readability and reasoning about their
behavior convert them to simple function as they don't do anything
relevant with their macro powers.
# User-Facing Changes
None
# Tests + Formatting
(-)
# Description
While we have now a few ways to add items or iterate over the
collection, we don't have a way to cleanly remove items from `Record`.
This PR fixes that:
- Add `Record.remove()` to remove by key
- makes the assumption that keys are unique, so can not be used
universally, yet (see #10875 for an important example)
- Add naive `Record.retain()` for inplace removal
- This follows the two separate `retain`/`retain_mut` in the Rust std
library types, compared to the value-mutating `retain` in `indexmap`
- Add `Record.retain_mut()` for one-pass pruning
Continuation of #10841
# User-Facing Changes
None yet.
# Tests + Formatting
Doctests for the `retain`ing fun
# Description
> Our `Record` looks like a map, quacks like a map, so let's treat it
with the API for a map
Implement common methods found on e.g. `std::collections::HashMap` or
the insertion-ordered [indexmap](https://docs.rs/indexmap).
This allows contributors to not have to worry about how to get to the
relevant items and not mess up the assumptions of a Nushell record.
## Record assumptions
- `cols` and `vals` are of equal length
- for all practical purposes, keys/columns should be unique
## End goal
The end goal of the upcoming series of PR's is to allow us to make
`cols` and `vals` private.
Then it would be possible to exchange the backing datastructure to best
fit the expected workload.
This could be statically (by finding the best balance) or dynamically by
using an `enum` of potential representations.
## Parts
- Add validating explicit part constructor
`Record::from_raw_cols_vals()`
- Add `Record.columns()` iterator
- Add `Record.values()` iterator
- Add consuming `Record.into_values()` iterator
- Add `Record.contains()` helper
- Add `Record.insert()` that respects existing keys
- Add key-based `.get()`/`.get_mut()` to `Record`
- Add `Record.get_index()` for index-based access
- Implement `Extend` for `Record` naively
- Use checked constructor in `record!` macro
- Add `Record.index_of()` to get index by key
# User-Facing Changes
None directly
# Developer facing changes
You don't have to roll your own record handling and can use a familiar
API
# Tests + Formatting
No explicit unit tests yet. Wouldn't be too tricky to validate core
properties directly.
Will be exercised by the following PRs using the new
methods/traits/iterators.
# Description
Use `record!` macro instead of defining two separate `vec!` for `cols`
and `vals` when appropriate.
This visually aligns the key with the value.
Further more you don't have to deal with the construction of `Record {
cols, vals }` so we can hide the implementation details in the future.
## State
Not covering all possible commands yet, also some tests/examples are
better expressed by creating cols and vals separately.
# User/Developer-Facing Changes
The examples and tests should read more natural. No relevant functional
change
# Bycatch
Where I noticed it I replaced usage of `Value` constructors with
`Span::test_data()` or `Span::unknown()` to the `Value::test_...`
constructors. This should make things more readable and also simplify
changes to the `Span` system in the future.
# Description
Support pattern matching against the `null` literal. Fixes#10799
### Before
```nushell
> match null { null => "success", _ => "failure" }
failure
```
### After
```nushell
> match null { null => "success", _ => "failure" }
success
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users can pattern match against a `null` literal.
related to
- https://github.com/nushell/nushell/pull/10478
# Description
this PR is the followup removal to
https://github.com/nushell/nushell/pull/10478.
# User-Facing Changes
`$nothing` is now an undefined variable, unless define by the user.
```nushell
> $nothing
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #1:1:1]
1 │ $nothing
· ────┬───
· ╰── variable not found.
╰────
```
# Tests + Formatting
# After Submitting
mention that in release notes
# Description
This PR adds the ability to use modulo with durations:
```nu
(2min + 31sec) mod 20sec # 11sec
```
# User-Facing Changes
Allows to use `<duration> mod <duration>`
(squashed version of #10557, clean commit history and review thread)
Fixes#10571, also potentially: #10364, #10211, #9558, #9310,
# Description
Changes processing of arguments to filesystem commands that are source
paths or globs.
Applies to `cp, cp-old, mv, rm, du` but not `ls` (because it uses a
different globbing interface) or `glob` (because it uses a different
globbing library).
The core of the change is to lookup the argument first as a file and
only glob if it is not. That way,
a path containing glob metacharacters can be referenced without glob
quoting, though it will have to be single quoted to avoid nushell
parsing.
Before: A file path that looks like a glob is not matched by the glob
specified as a (source) argument and takes some thinking about to
access. You might say the glob pattern shadows a file with the same
spelling.
```
> ls a*
╭───┬────────┬──────┬──────┬────────────────╮
│ # │ name │ type │ size │ modified │
├───┼────────┼──────┼──────┼────────────────┤
│ 0 │ a[bc]d │ file │ 0 B │ 34 seconds ago │
│ 1 │ abd │ file │ 0 B │ now │
│ 2 │ acd │ file │ 0 B │ now │
╰───┴────────┴──────┴──────┴────────────────╯
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
> ## Note -- a[bc]d *not* copied, and seemingly hard to access.
> cp --verbose 'a\[bc\]d' dest
Error: × No matches found
╭─[entry #33:1:1]
1 │ cp --verbose 'a\[bc\]d' dest
· ─────┬────
· ╰── no matches found
╰────
> #.. but is accessible with enough glob quoting.
> cp --verbose 'a[[]bc[]]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
```
Before_2: if file has glob metachars but isn't a valid pattern, user
gets a confusing error:
```
> touch 'a[b'
> cp 'a[b' dest
Error: × Pattern syntax error near position 30: invalid range pattern
╭─[entry #13:1:1]
1 │ cp 'a[b' dest
· ──┬──
· ╰── invalid pattern
╰────
```
After: Args to cp, mv, etc. are tried first as literal files, and only
as globs if not found to be files.
```
> cp --verbose 'a[bc]d' dest
copied /home/bobhy/src/rust/work/r4/a[bc]d to /home/bobhy/src/rust/work/r4/dest/a[bc]d
> cp --verbose '[a][bc]d' dest
copied /home/bobhy/src/rust/work/r4/abd to /home/bobhy/src/rust/work/r4/dest/abd
copied /home/bobhy/src/rust/work/r4/acd to /home/bobhy/src/rust/work/r4/dest/acd
```
After_2: file with glob metachars but invalid pattern just works.
(though Windows does not allow file name to contain `*`.).
```
> cp --verbose 'a[b' dest
copied /home/bobhy/src/rust/work/r4/a[b to /home/bobhy/src/rust/work/r4/dest/a[b
```
So, with this fix, a file shadows a glob pattern with the same spelling.
If you have such a file and really want to use the glob pattern, you
will have to glob quote some of the characters in the pattern. I think
that's less confusing to the user: if ls shows a file with a weird name,
s/he'll still be able to copy, rename or delete it.
# User-Facing Changes
Could break some existing scripts. If user happened to have a file with
a globbish name but was using a glob pattern with the same spelling, the
new version will process the file and not expand the glob.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR changes `Type::Float` to point at `SyntaxShape::Float` instead
of `SyntaxShape::Number`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related to
- https://github.com/nushell/nushell/issues/9373
- https://github.com/nushell/nushell/issues/8639
might be able to close https://github.com/nushell/nushell/issues/8639?
# Description
"can't follow stream paths" errors have always been a bit scary and
obnoxious because they give no information about what happens...
in this PR i try to slightly improve the error message by telling if the
stream was empty or not and give span information when available.
# User-Facing Changes
```nushell
> update value (get value)
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #1:1:1]
1 │ update value (get value)
· ─┬─
· ╰── empty pipeline doesn't support cell paths
╰────
```
```nushell
> ^echo "foo" | get 0
Error: nu:🐚:incompatible_path_access
× Data cannot be accessed with a cell path
╭─[entry #2:1:1]
1 │ ^echo "foo" | get 0
· ──┬─
· ╰── external stream doesn't support cell paths
╰────
```
# Tests + Formatting
# After Submitting
# Description
When referring to the type use `int` consistently. Only when referring
to the concept of integer numbers use `integer`.
- Fix `random integer` to `random int` tests
- Forgot in #10520
- Use int instead of integer in error messages
- Use int type name in bits commands
- Fix messages in `for` examples
- Use int typename in `into` commands
- Use int typename in rest of commands
- Report errors in `nu-protocol` with int typename
Work for #10332
# User-Facing Changes
User errorrs should now use `int` so you can easily find the necessary
commands or type annotations.
# Tests + Formatting
Only two tests found that needed updating
# Description
This removes the old style "cd with abbreviations" that would attempt to
guess what directory you wanted to `cd` to. This would sometimes have
false positives, so we left it off by default in the config.
In the current main, we have much-improved path completions
(https://github.com/nushell/nushell/pull/10543) so you can now do `cd
a/b<tab>` and get a much better experience (because you can see the
directory you're about to cd to). This removes the need for the previous
abbreviation system.
# User-Facing Changes
This does remove the old abbreviation system. It will likely mean that
old config files that have settings for abbreviations will now get
errors.
update: here's an example of the error you'll see:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The description `Custom` doesn't really reflect meaning in the set of
`SyntaxShape`. Makes it a bit more verbose but explicit
# User-Facing Changes
Only hypothetically breaking as plugins can not effectively use a
requirement on `SyntaxShape::Custom`.
# Tests + Formatting
(-)
# Description
This merges @horasal 's changes from #10246 and #10269Closes#10205Closes#8714
Fixes the bug that editor paths with spaces are unusable
Closes#10210Closes#10269
# User-Facing Changes
You can now either pass a string with the name of the executable or a
list with the executable and any flags to
`$env.config.buffer_editor`/`$env.EDITOR`/`$env.VISUAL`
Both the external buffer editor of reedline (by default bound to
`Ctrl-o`) and the commands `config nu` and `config env` will respect
those variables in the following order:
1. `$env.config.buffer_editor`
2. `$env.EDITOR`
3. `$env.VISUAL`
Example:
```
$env.EDITOR = "nvim" # The system-wide EDITOR is neovim
$env.config.buffer_editor = ["vim" "-p2"] # Force vim to open two tabs (not particularly useful)
$env.config.buffer_editor = null # Unset `buffer_editor` -> Uses `$env.EDITOR` ergo nvim
```
# Tests + Formatting
None
---------
Co-authored-by: Horasal <1991933+horasal@users.noreply.github.com>
# Description
Support keyboard enhancement protocol as implemented by Kitty console,
hence Kitty protocol.
This PR enables Nushell to use keybinding that is not available before,
such as Ctrl+i (that alias to Tab) or Ctrl+e (that alias to Esc, likely
I mistaken). After this PR merged and you set `use_kitty_protocol`
enabled, if your console app support Kitty protocol (WezTerm, Kitty,
etc.) you will be able to set more fine-grained keybinding.
For Colemak users, this feature is a blessing, because some Ctrl+[hjkl]
that previously unmap-able to Ctlr+[hnei] now it is.
# User-Facing Changes
This adds `use_kitty_protocol` config which defaults to false. When set
to `true`, it enables kitty protocol on the line editor when supported,
or else it warns.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
We don't use this shape during parsing and never reference it in command
signatures. Thus it should be removed.
# User-Facing Changes
None functional.
Plugin authors that used it would never be provided with data that
specifically matched `SyntaxShape::Variable`
Builds using it will now fail.
# Tests + Formatting
NA
related to
- https://github.com/nushell/nushell/pull/9973
- https://github.com/nushell/nushell/pull/9918
thanks to @jntrnr and their super useful tips on this PR, i learned
about the parser + evaluation, so 🙏
# Description
because we already have `null` as the value of the type `nothing` and as
a followup to the two other attempts of mine, i propose to remove the
redundant `$nothing` built-in variable 😋
this PR is the first step, deprecating `$nothing`.
a followup PR will remove it altogether and wait for 0.87 👍⚙️ **details**: a new `NOTHING_VARIABLE_ID = 3` has been added,
parsing `$nothing` will create it, finally a `Value::Nothing` will be
produced and a warning will be reported.
this PR already fixes the `toolkit.nu` module so that it does not throw
a bunch of warnings each time 👌
# User-Facing Changes
`$nothing` is now deprecated and will be removed in 0.87
```nushell
> $nothing
Error: × Deprecated variable
╭─[entry #1:1:1]
1 │ $nothing
· ────┬───
· ╰── `$nothing` is deprecated and will be removed in 0.87.
╰────
help: Use `null` instead
```
# Tests + Formatting
tests have been updated, especially
- `nothing_fails_string`
- `nothing_fails_int`
which use a variable called `nil` now to make sure `nothing` does not
support cell paths 👍
# After Submitting
classic deprecation mention 👍
should close https://github.com/nushell/nushell/issues/10406
# Description
when writing a script, with variables you try to `ls` or `open`, you
will get a "directory not found" error but the variable won't be
expanded and you won't be able to see which one of the variable was the
issue...
this PR adds this information to the error.
# User-Facing Changes
let's define a variable
```nushell
let does_not_exist = "i_do_not_exist_in_the_current_directory"
```
### before
```nushell
> open $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #7:1:1]
1 │ open $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
```
```nushell
> ls $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #8:1:1]
1 │ ls $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
```
### after
```nushell
> open $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #3:1:1]
1 │ open $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
help: /home/amtoine/documents/repos/github.com/amtoine/nushell/i_do_not_exist_in_the_current_directory does not exist
```
```nushell
> ls $does_not_exist
Error: nu:🐚:directory_not_found
× Directory not found
╭─[entry #4:1:1]
1 │ ls $does_not_exist
· ───────┬───────
· ╰── directory not found
╰────
help: /home/amtoine/documents/repos/github.com/amtoine/nushell/i_do_not_exist_in_the_current_directory does not exist
```
# Tests + Formatting
shouldn't harm anything 🤞
# After Submitting
Factor the big parts into separate files:
- `state_delta.rs`
- `state_working_set.rs`
- smaller `usage.rs`
This required adjusting the visibility of several parts.
Makes `StateDelta` transparent for the module.
Trying to reduce visibility in some other places
# Description
We made the decision that our floating point type should be referred to
as `float` over `decimal`.
Commands were updated by #9979 and #10320
Now make the internal codebase consistent in referring to this data type
as `float`.
Work for #10332
# User-Facing Changes
`decimal` has been removed as a type name/symbol.
Instead of
```nushell
def foo [bar: decimal] decimal -> decimal {}
```
use
```nushell
def foo [bar: float] float -> float {}
```
Potential effect of `SyntaxShape`'s `Display` implementation now also
referring to `float` instead of `decimal`
# Details
- Rename `SyntaxShape::Decimal` to `Float`
- Update `Display for SyntaxShape` to `float`
- Update error message + fn name in dataframe code
- Fix docs in command examples
- Rename tests that are float specific
- Update doccomment on `SyntaxShape`
- Update comment in script
# Tests + Formatting
Updates the names of some tests
# Description
Currently we support "multiplication" of strings, resulting in a terse
way to repeat a particular string.
This can have unintended side effects when dealing with mixed data (e.g.
after parsing data that is not all numbers).
Furthermore as we frequently fall-back to strings while parsing source
code, this introduced a runaway edge case in const evaluation (#10212)
Work for #10233
## Details
- Remove python-like string multiplication.
- Workaround for indentation
- This should probably be addressed with a purpose built command
- Remove special const-eval error test
# User-Facing Changes
**Major breaking change!**
`"string" * 42` will stop working. (This was used for example in the
stdlib)
We should bless a good alternative before landing this
---------
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Elide the reference for `Copy` type (`usize`)
Use the canonical deref where possible.
* `&Box` -> `&`
* `&String` -> `&str`
* `&PathBuf` -> `&Path`
Skips the ctrl-C handler for now.
# Description
The pythonism that multiplying a scalar integer with a list results in a
repeated concatenation of the list, is ambiguous with other possible
interpretations and thus actively harmful to clear semantics in nushell.
Another possible reading of this scalar/vector product would be trying
to perform elementwise multiplication with the scalar.
Before we bless this alternative as a more reasonable design the best
course of action is to remove this pythonism.
Work related to #10233
# User-Facing Changes
Breaking change as this turns `int * list` or `list * int` into hard
errors.
# Tests + Formatting
Remove the associated test
# Description
We keep "into decimal" for a release and warn through a message that it
will be removed in 0.86.
All tests are updated to use `into float`
# User-Facing Changes
`into decimal` raises a deprecation warning, will be removed soon.
Use `into float` as the new functionally identical command instead.
```
~/nushell> 2 | into decimal
Error: × Deprecated command
╭─[entry #1:1:1]
1 │ 2 | into decimal
· ──────┬─────
· ╰── `into decimal` is deprecated and will be removed in 0.86.
╰────
help: Use `into float` instead
2
```
# Tests + Formatting
Updated
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This generally makes for nicer APIs, as you are not forced to use an
existing allocation covering the full `String`.
Some exceptions remain where the underlying type requirements favor it.
# User-Facing Changes
None
# Description
This removes pipeline element profiling. This could be a useful feature,
but pipeline elements are going to be the most sensitive to in terms of
performance, as `eval_block` and how pipelines are built is one of the
hot loops inside of the eval engine.
# User-Facing Changes
Removes pipeline element profiling.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
There are several cursor shape related issues #7151#9243#7271#8452#10169, you can't disable the cursor shape feature even if you comment
out the entire `cursor_shape` block in the config.nu, and even worse,
when nushell exits with an error, the cursor shape can't be restored,
that is annoying.
This PR provides an opportunity to disable setting the cursor shape.
# User-Facing Changes
If you use the default config.nu, nothing changes, but if you comment
out `cursor_shape` block or set them to `inherit`, related cursor shape
will not be set.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Apparently some strftime formats are already localized and when you
"double localize" them, they don't work. This PR fixes that so that %x
%X %r %c don't go through the localization step.
Example: %x %X
### Before
```nushell
❯ date now | format date "%x %X %p"
09/08/2023 08 AM
```
### After
```nushell
❯ date now | format date "%x %X %p"
09/08/23 08:09:14 AM
```
I started to make one format_datetime to rule them all but one returns a
string and one returns a value. If we convert to the string, we lose the
nice error messages. If we change to value, more code has to be changed
elsewhere. So, I decided to just leave two functions.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
before this PR,
```nushell
> $.a.b | describe
cell path
```
which feels inconsistent with the `cell-path` type annotation, like in
```nushell
> def foo [x: cell-path] { $x | describe }; foo $.a.b
cell path
```
this PR changes the name of the "cell path" type from `cell path` to
`cell-path`
# User-Facing Changes
`cell path` is now `cell-path` in the output of `describe`.
this might be a breaking change in some scripts.
same goes with
- `list stream` -> `list-stream`
- `match pattern` -> `match-pattern`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- ⚫ `toolkit test`
- ⚫ `toolkit test stdlib`
this PR adds a new `cell_path_type` test to make sure it stays equal to
`cell-path` in the future.
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
rustfmt 1.6.0 has added support for formatting [let-else
statements](https://doc.rust-lang.org/rust-by-example/flow_control/let_else.html)
See https://github.com/rust-lang/rustfmt/blob/master/CHANGELOG.md#added
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds the ability to have a `$nu.plugin-path` even when you
plugins are registered and it also should work with `nu -n --no-stdlib`.
### Before
It would give an error
```
│ plugin-path │ IOError("Could not get plugin signature location") │
```
### After
It returns the proper path, like this for me
```
│ plugin-path │ /Users/fdncred/Library/Application Support/nushell/plugin.nu │
```
Closed#10198
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
As part of the refactor to split spans off of Value, this moves to using
helper functions to create values, and using `.span()` instead of
matching span out of Value directly.
Hoping to get a few more helping hands to finish this, as there are a
lot of commands to update :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <windsoilder@outlook.com>
This addresses the warnings generated from using DateTime::from_utc.
DateTime::from_utc was deprecated as of chrono 0.4.27
Co-authored-by: Jack Wright <jack.wright@disqo.com>
- Hopefully closes#10120
# Description
This PR adds a new config item, `error_style`. It will render errors in
a screen reader friendly mode when set to `"simple"`. This is done using
`miette`'s own `NarratableReportHandler`, which seamlessly replaces the
default one when needed.
Before:
```
Error: nu:🐚:external_command
× External command failed
╭─[entry #2:1:1]
1 │ doesnt exist
· ───┬──
· ╰── executable was not found
╰────
help: No such file or directory (os error 2)
```
After:
```
Error: External command failed
Diagnostic severity: error
Begin snippet for entry #4 starting at line 1, column 1
snippet line 1: doesnt exist
label at line 1, columns 1 to 6: executable was not found
diagnostic help: No such file or directory (os error 2)
diagnostic code: nu:🐚:external_command
```
## Things to be determined
- ~Review naming. `errors.style` is not _that_ consistent with the rest
of the code. Menus use a `style` record, but table rendering mode is set
via `mode`.~ As it's a single config, we're using `error_style` for now.
- Should this kind of setting be toggable with one single parameter?
`accessibility.no_decorations` or similar, which would adjust the style
of both errors and tables accordingly.
# User-Facing Changes
No changes by default, errors will be rendered differently if
`error_style` is set to `simple`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
There's a PR updating the docs over here
https://github.com/nushell/nushell.github.io/pull/1026
# Description
This doesn't really do much that the user could see, but it helps get us
ready to do the steps of the refactor to split the span off of Value, so
that values can be spanless. This allows us to have top-level values
that can hold both a Value and a Span, without requiring that all values
have them.
We expect to see significant memory reduction by removing so many
unnecessary spans from values. For example, a table of 100,000 rows and
5 columns would have a savings of ~8megs in just spans that are almost
always duplicated.
# User-Facing Changes
Nothing yet
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR creates a new `Record` type to reduce duplicate code and
possibly bugs as well. (This is an edited version of #9648.)
- `Record` implements `FromIterator` and `IntoIterator` and so can be
iterated over or collected into. For example, this helps with
conversions to and from (hash)maps. (Also, no more
`cols.iter().zip(vals)`!)
- `Record` has a `push(col, val)` function to help insure that the
number of columns is equal to the number of values. I caught a few
potential bugs thanks to this (e.g. in the `ls` command).
- Finally, this PR also adds a `record!` macro that helps simplify
record creation. It is used like so:
```rust
record! {
"key1" => some_value,
"key2" => Value::string("text", span),
"key3" => Value::int(optional_int.unwrap_or(0), span),
"key4" => Value::bool(config.setting, span),
}
```
Since macros hinder formatting, etc., the right hand side values should
be relatively short and sweet like the examples above.
Where possible, prefer `record!` or `.collect()` on an iterator instead
of multiple `Record::push`s, since the first two automatically set the
record capacity and do less work overall.
# User-Facing Changes
Besides the changes in `nu-protocol` the only other breaking changes are
to `nu-table::{ExpandedTable::build_map, JustTable::kv_table}`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
https://github.com/nushell/nushell/pull/9773 introduced constants to
modules and allowed to export them, but only within one level. This PR:
* allows recursive exporting of constants from all submodules
* fixes submodule imports in a list import pattern
* makes sure exported constants are actual constants
Should unblock https://github.com/nushell/nushell/pull/9678
### Example:
```nushell
module spam {
export module eggs {
export module bacon {
export const viking = 'eats'
}
}
}
use spam
print $spam.eggs.bacon.viking # prints 'eats'
use spam [eggs]
print $eggs.bacon.viking # prints 'eats'
use spam eggs bacon viking
print $viking # prints 'eats'
```
### Limitation 1:
Considering the above `spam` module, attempting to get `eggs bacon` from
`spam` module doesn't work directly:
```nushell
use spam [ eggs bacon ] # attempts to load `eggs`, then `bacon`
use spam [ "eggs bacon" ] # obviously wrong name for a constant, but doesn't work also for commands
```
Workaround (for example):
```nushell
use spam eggs
use eggs [ bacon ]
print $bacon.viking # prints 'eats'
```
I'm thinking I'll just leave it in, as you can easily work around this.
It is also a limitation of the import pattern in general, not just
constants.
### Limitation 2:
`overlay use` successfully imports the constants, but `overlay hide`
does not hide them, even though it seems to hide normal variables
successfully. This needs more investigation.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Allows recursive constant exports from submodules.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In the past we named the process of completely removing a command and
providing a basic error message pointing to the new alternative
"deprecation".
But this doesn't match the expectation of most users that have seen
deprecation _warnings_ that alert to either impending removal or
discouraged use after a stability promise.
# User-Facing Changes
Command category changed from `deprecated` to `removed`
Running tests locally from nushell with customizations (i.e.
$env.PROMPT_COMMAND etc) may lead to failing tests as that customization
leaks to the sandboxed nu itself.
Remove `FILE_PWD` from env
# Tests + Formatting
Tests are now passing locally without issue in my case
# Description
This PR does three related changes:
* Keeps the originally declared name in help outputs.
* Updates the name of the commands called `main` in the user script to
the name of the script.
* Fixes the source of signature information in multiple places. This
allows scripts to have more complete help output.
Combined, the above allow the user to see the script name in the help
output of scripts, like so:
NOTE: You still declare and call the definition `main`, so from inside
the script `main` is still the correct name. But multiple folks agreed
that seeing `main` in the script help was confusing, so this PR changes
that.
# User-Facing Changes
One potential minor breaking change is that module renames will be shown
as their originally defined name rather than the renamed name. I believe
this to be a better default.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
This PR should close#8036, #9028 (in the negative) and #9118.
Fix for #9118 is a bit pedantic. As reported, the issue is:
```
> 2023-05-07T04:08:45+12:00 - 2019-05-10T09:59:12+12:00
3yr 12month 2day 18hr 9min 33sec
```
with this PR, you now get:
```
> 2023-05-07T04:08:45+12:00 - 2019-05-10T09:59:12+12:00
208wk 1day 18hr 9min 33sec
```
Which is strictly correct, but could still fairly be called "weird date
arithmetic".
# Description
* [x] Abide by constraint that Value::Duration remains a number of
nanoseconds with no additional fields.
* [x] `to_string()` only displays weeks .. nanoseconds. Duration doesn't
have base date to compute months or years from.
* [x] `duration | into record` likewise only has fields for weeks ..
nanoseconds.
* [x] `string | into duration` now accepts compound form of duration
to_string() (e.g '2day 3hr`, not just '2day')
* [x] `duration | into string` now works (and produces the same
representation as to_string(), which may be compound).
# User-Facing Changes
## duration -> string -> duration
Now you can "round trip" an arbitrary duration value: convert it to a
string that may include multiple time units (a "compound" value), then
convert that string back into a duration. This required changes to
`string | into duration` and the addition of `duration | into string'.
```
> 2day + 3hr
2day 3hr # the "to_string()" representation (in this case, a compound value)
> 2day + 3hr | into string
2day 3hr # string value
> 2day + 3hr | into string | into duration
2day 3hr # round-trip duration -> string -> duration
```
Note that `to nuon` and `from nuon` already round-tripped durations, but
use a different string representation.
## potentially breaking changes
* string rendering of a duration no longer has 'yr' or 'month' phrases.
* record from `duration | into record` no longer has 'year' or 'month'
fields.
The excess duration is all lumped into the `week` field, which is the
largest time unit you can
convert to without knowing the datetime from which the duration was
calculated.
Scripts that depended on month or year time units on output will need to
be changed.
### Examples
```
> 365day
52wk 1day
## Used to be:
## 1yr
> 365day | into record
╭──────┬────╮
│ week │ 52 │
│ day │ 1 │
│ sign │ + │
╰──────┴────╯
## used to be:
##╭──────┬───╮
##│ year │ 1 │
##│ sign │ + │
##╰──────┴───╯
> (365day + 4wk + 5day + 6hr + 7min + 8sec + 9ms + 10us + 11ns)
56wk 6day 6hr 7min 8sec 9ms 10µs 11ns
## used to be:
## 1yr 1month 3day 6hr 7min 8sec 9ms 10µs 11ns
## which looks reasonable, but was actually only correct in 75% of the years and 25% of the months in the last 4 years.
> (365day + 4wk + 5day + 6hr + 7min + 8sec + 9ms + 10us + 11ns) | into record
╭─────────────┬────╮
│ week │ 56 │
│ day │ 6 │
│ hour │ 6 │
│ minute │ 7 │
│ second │ 8 │
│ millisecond │ 9 │
│ microsecond │ 10 │
│ nanosecond │ 11 │
│ sign │ + │
╰─────────────┴────╯
```
Strictly speaking, these changes could break an existing user script.
Losing years and months as time units is arguably a regression in
behavior.
Also, the corrected duration calculation could break an existing script
that was calibrated using the old algorithm.
# Tests + Formatting
```
> toolkit check pr
```
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Bob Hyman <bobhy@localhost.localdomain>
# Description
This PR adds back the functionality to auto-expand tables based on the
terminal width, using the logic that if the terminal is over 100 columns
to expand.
This sets the default config value in both the Rust and the default
nushell config.
To do so, it also adds back the ability for hooks to be strings of code
and not just code blocks.
Fixed a couple tests: two which assumed that the builtin display hook
didn't use a table -e, and one that assumed a hook couldn't be a string.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Signatures in `help commands` will now have more structure for params
and input/output pairs.
Example:
Improved params
Improved input/output pairs
# User-Facing Changes
This is technically a breaking change if previous code assumed the shape
of things in `help commands`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes `Value::columns` to return a slice of columns instead of
cloning said columns. If the caller needs an owned copy, they can use
`slice::to_vec` or the like. This eliminates unnecessary Vec clones
(e.g., in `update cells`).
# User-Facing Changes
Breaking change for `nu_protocol` API.
fix#9796
Sorry that you've had the issues.
I've actually encountered them yesterday too (seems like they have
appeared after some refactoring in the middle) but was not able to fix
that rapid.
Created a bunch of tests.
cc: @fdncred
Note:
This option will be certainly slower then a default ones. (could be
fixed but ... maybe later).
Maybe it shall be cited somewhere.
PS: Haven't tested on a wrapped/expanded tables.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Reverts nushell/nushell#9796
This is just draft since we're seeing some issues with the latest fixes
to table drawing that just landed with #9796. We're hoping to get these
fixed, but if we're not able to fix them before the next release, we'll
need to revert (hence this PR, just in case we need it).
A patch to play with.
Need to make a few tests after all.
The question is what shall be done with `table.mode = none`, as it has
no borders.
```nu
$env.config.table.move_header = true
```
cc: @fdncred
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Relative: #8248
After this pr, user can define const variable inside a module.
And user can export const variables, the following screenshot shows how
it works (it follows
https://github.com/nushell/nushell/issues/8248#issuecomment-1637442612):
## About the change
1. To make module support const, we need to change `parse_module_block`
to support `const` keyword.
2. To suport export `const`, we need to make module tracking variables,
so we add `variables` attribute to `Module`
3. During eval, the const variable may not exists in `stack`, because we
don't eval `const` when we define a module, so we need to find variables
which are already registered in `engine_state`
## One more thing to note about the const value.
Consider the following code
```
module foo { const b = 3; export def bar [] { $b } }
use foo bar
const b = 4;
bar
```
The result will be 3 (which is defined in module) rather than 4. I think
it's expected behavior.
It's something like [dynamic
binding](https://www.gnu.org/software/emacs/manual/html_node/elisp/Dynamic-Binding-Tips.html)
vs [lexical
binding](https://www.gnu.org/software/emacs/manual/html_node/elisp/Lexical-Binding.html)
in lisp like language, and lexical binding should be right behavior
which generates more predicable result, and it doesn't introduce really
subtle bugs in nushell code.
What if user want dynamic-binding?(For example: the example code returns
`4`)
There is no way to do this, user should consider passing the value as
argument to custom command rather than const.
## TODO
- [X] adding tests for the feature.
- [X] support export const out of module to use.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
`Span` is `Copy`, so we probably should not be passing references of
`Span` around. This PR replaces all instances of `&Span` with `Span`,
copying spans where necessary.
# User-Facing Changes
This alters some public functions to take `Span` instead of `&Span` as
input. Namely, `EngineState::get_span_contents`,
`nu_protocol::extract_value`, a bunch of the math commands, and
`Gstat::gstat`.
# Description
With the current typechecking logic this property has no effect.
It was only used in the example testing, and provided some indication of
this vectorizing property.
With #9742 all commands that previously declared it have explicit list
signatures. If we want to get it back in the future we can reconstruct
it from the signature.
Simplifies the example testing a bit.
# User-Facing Changes
Causes a breaking change for plugins that previously declared it. While
this causes a compile fail, this was already broken by our more
stringent type checking.
This will be a good reminder for plugin authors to update their
signature as well to reflect the more stringent type checking.
# Description
If we reach the conclusion that the fields of a list are of `Type::Any`
there is no need to continue as the type will remain `Type::Any`
This should improve runtimes of `Value.get_type()` for lists with mixed
types.
# User-Facing Changes
None, a speedup in some cases.
# Tests + Formatting
Relies on existing tests
# Description
This PR ensures functions exist to extract and create each and every
`Value` case. It also renames `Value::boolean` to `Value::bool` to match
`Value::test_bool`, `Value::as_bool`, and `Value::Bool`. Similarly,
`Value::as_integer` was renamed to `Value::as_int` to be consistent with
`Value::int`, `Value::test_int`, and `Value::Int`. These two renames can
be undone if necessary.
# User-Facing Changes
No user facing changes, but two public functions were renamed which may
affect downstream dependents.
# Description
This PR follows #9762 and sets the rust component to match
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
related PRs and issues
- supersedes https://github.com/nushell/nushell/pull/9633
- should close https://github.com/nushell/nushell/issues/9630
# Description
this PR updates the `default_config.nu` config file and the `config.rs`
module in `nu_protocol` so that the default behaviour of Nushell,
without any config, and the one with `default_config.nu` and
`default_env.nu` are the same.
## changelog
- 3e2bfc9bb: copy the structure of `default_config.nu` inside the
implementation of `Default` in the `config.rs` module for easier check
of the default values
- e25e5ccd6: sync all the *simple* config fields, i.e. the
non-structured ones
- ae7e8111c: set the `display_output` hook to always run `table`
- a09a1c564: leave only the default menus => i've removed
`commands_menu`, `vars_menu` and `commands_with_description`
## todo
- [x] ~~check the defaults in `$env.config.explore`~~ done in 173bdbba5
and b9622084c
- [x] ~~check the defaults in `$env.config.color_config`~~ done in
c411d781d => the theme is now `{}` by default so that it's the same as
the default one with `--no-config`
- [x] ~~check the defaults `$env.config.keybindings`~~ done in 715a69797
- already available with the selected mode: `completion_previous`,
`next_page`, `undo_or_previous_page`, `yank`, `unix-line-discard` and
`kill-line`, e.g. in *vi* mode, `unlix-line-discard` is done in NORMAL
mode with either `d0` from the end of the line or `dd` from anywhere in
the line and `kill-line` is done in NORMAL mode with `shift + d`. these
bindings are available by default in *emacs* mode as well.
- previously with removed custom menus: `commands_menu`, `vars_menu` and
`commands_with_description`
- [x] ~~check `$env.config.datetime_format`~~ done in 0ced6b8ec => as
there is no *human* format for datetimes, i've commented out both
`$env.config.datetime_format` fields
- [x] ~~fix `default_env.nu`~~ done in 67c215011
# User-Facing Changes
this should not change anything, just make sure the default behaviour of
Nushell and the `default_config.nu` are in sync.
# Tests + Formatting
# After Submitting
## description
this pr adds [match
guards](https://doc.rust-lang.org/reference/expressions/match-expr.html#match-guards)
to match patterns
```nushell
match $x {
_ if $x starts-with 'nu' => {},
$x => {}
}
```
these work pretty much like rust's match guards, with few limitations:
1. multiple matches using the `|` are not (yet?) supported
```nushell
match $num {
0 | _ if (is-odd $num) => {},
_ => {}
}
```
2. blocks cannot be used as guards, (yet?)
```nushell
match $num {
$x if { $x ** $x == inf } => {},
_ => {}
}
```
## checklist
- [x] syntax
- [x] syntax highlighting[^1]
- [x] semantics
- [x] tests
- [x] clean up
[^1]: defered for another pr
# Description
This PR tights input/output type-checking a bit more. There are a lot of
commands that don't have correct input/output types, so part of the
effort is updating them.
This PR now contains updates to commands that had wrong input/output
signatures. It doesn't add examples for these new signatures, but that
can be follow-up work.
# User-Facing Changes
BREAKING CHANGE BREAKING CHANGE
This work enforces many more checks on pipeline type correctness than
previous nushell versions. This strictness may uncover incompatibilities
in existing scripts or shortcomings in the type information for internal
commands.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR removes the compile-time overload system. Unfortunately, this
system never worked correctly because in a gradual type system where
types can be `Any`, you don't have enough information to correctly
resolve function calls with overloads. These resolutions must be done at
runtime, if they're supported.
That said, there's a bit of work that needs to go into resolving
input/output types (here overloads do not execute separate commands, but
the same command and each overload explains how each output type
corresponds to input types).
This PR also removes the type scope, which would give incorrect answers
in cases where multiple subexpressions were used in a pipeline.
# User-Facing Changes
Finishes removing compile-time overloads. These were only used in a few
places in the code base, but it's possible it may impact user code. I'll
mark this as breaking change so we can review.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
- A new one is the removal of unnecessary `#` in raw strings without `"`
inside.
-
https://rust-lang.github.io/rust-clippy/master/index.html#/needless_raw_string_hashes
- The automatically applied removal of `.into_iter()` touched several
places where #9648 will change to the use of the record API. If
necessary I can remove them @IanManske to avoid churn with this PR.
- Manually applied `.try_fold` in two places
- Removed a dead `if`
- Manual: Combat rightward-drift with early return
# Description
follow up to #8529 and #8914
this works very similarly to record annotations, only difference being
that
```sh
table<name: string>
^^^^ ^^^^^^
| |
| represents the type of the items in that column
|
represents the column name
```
more info on the syntax can be found
[here](https://github.com/nushell/nushell/pull/8914#issue-1672113520)
# User-Facing Changes
**[BREAKING CHANGE]**
this change adds a field to `SyntaxShape::Table` so any plugins that
used it will have to update and include the field. though if you are
unsure of the type the table expects, `SyntaxShape::Table(vec![])` will
suffice
# Description
the current subtyping rule needs you to define the record entries in the
same order as declared in the annotation. this pr improves that
now
```nushell
{ name: 'Him', age: 12 }
# ,
{ age: 100, name: 'It' }
# and
{ name: 'Red', age: 69, height: "5-8" }
# will all match
record<name: string, age: int>
# previously only the first one would match
```
however, something like
```nushell
{ name: 'Her' } # will not
# and
{ name: 'Car', wheels: 5 }
```
EDIT: applied JT's suggestion
# Description
We previously simply searched all commands in the working set. As our
deprecated/removed subcommands are documented by stub commands that
don't do anything apart from providing a message, they were still
included.
With this change we check the `Signature.category` to not be
`Category::Deprecated`.
## Note on performance
Making this change will exercise `Command.signature()` more
frequently! As the rust-implemented commands include their builders here
this probably will cause a number of extra allocations. There is
actually no valid reason why the commands should construct a new
`Signature` for each call to `Command.signature()`.
This will introduce some overhead to generate the completions for
commands.
# User-Facing Changes
Example: `str <TAB>`
# Description
A couple clippy fixes
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR does a few things to help improve type hovers and, in the
process, fixes a few outstanding issues in the type system. Here's a
list of the changes:
* `for` now will try to infer the type of the iteration variable based
on the expression it's given. This fixes things like `for x in [1, 2, 3]
{ }` where `x` now properly gets the int type.
* Removed old input/output type fields from the signature, focuses on
the vec of signatures. Updated a bunch of dataframe commands that hadn't
moved over. This helps tie things together a bit better
* Fixed inference of types from subexpressions to use the last
expression in the block
* Fixed handling of explicit types in `let` and `mut` calls, so we now
respect that as the authoritative type
I also tried to add `def` input/output type inference, but unfortunately
we only know the predecl types universally, which means we won't have
enough information to properly know what the types of the custom
commands are.
# User-Facing Changes
Script typechecking will get tighter in some cases
Hovers should be more accurate in some cases that previously resorted to
any.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
- fixes#9501
# Description
`chrono::Datetime::to_rfc2822()` panics when it would format a negative
year. 3339 does not. This makes negative-year datetimes inconsistent
compared to positive ones, but it's better than a panic.
# Description
`derive(EnumIter)` is only required to run completeness tests.
Thus make the derive conditional on test and move `strum` and
`strum_macros` to the dev dependencies.
## Is it worth it?
Removing this derive does not change the binary size (checked via `cargo
bloat --crates` from `cargo-bloat`).
Compile time change is below a second so hard to judge based on a single
run of `cargo clean --profile dev; cargo build --timings`
Unsure if this negatively impacts how incremental compilation can
recompile when you switch between `cargo build`/`run` and `cargo test`
in your local workflow.
To get rid of `strum`/`strum_macros` as a proc macro crate we would need
to also remove it from `reedline`.
Further more a crate in the `polars` dependency tree uses `strum`
(curently not as relevant for the 1.0 build).
# Description
This PR improves the error message if an environment variable (that's
visible before the parser begins) is used in the form of `$PATH` instead
of `$env.PATH`.
Before:
```
Error: nu::parser::variable_not_found
× Variable not found.
╭─[entry #31:1:1]
1 │ echo $PATH
· ──┬──
· ╰── variable not found.
╰────
```
After:
```
Error: nu::parser::env_var_not_var
× Use $env.PATH instead of $PATH.
╭─[entry #1:1:1]
1 │ echo $PATH
· ──┬──
· ╰── use $env.PATH instead of $PATH
╰────
```
# User-Facing Changes
Just the improvement to the error message
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- improves usability of datetime's in displayed text
-
# Description
Creates a config point for specifying long / short date time formats.
Defaults to humanized as we have today.
Provides for adding strftime formats into config.nu such as:
```nu
datetime_format: {
normal: "%Y-%m-%d %H:%M:%S"
table: "%Y-%m-%d"
}
```
Example:
```bash
> $env.config.datetime_format
┏━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ normal ┃ %a, %d %b %Y %H:%M:%S %z ┃
┃ table ┃ %m/%d/%y %I:%M:%S%p ┃
┗━━━━━━━━┻━━━━━━━━━━━━━━━━━━━━━━━━━━┛
> let a = (date now)
> echo $a
Thu, 22 Jun 2023 10:21:23 -0700
> echo [$a]
┏━━━┳━━━━━━━━━━━━━━━━━━━━━┓
┃ 0 ┃ 06/22/23 10:21:23AM ┃
┗━━━┻━━━━━━━━━━━━━━━━━━━━━┛
```
# User-Facing Changes
Any place converting a datetime to a user displayed value should be
impacted.
# Tests + Formatting
- `cargo fmt --all -- --check` Done
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` Done
- `cargo test --workspace` Done
- `cargo run -- crates/nu-std/tests/run.nu` Not done - doesn't seem to
work
```bash
> use toolkit.nu # or use an `env_change` hook to activate it automatically
> toolkit check pr
``` - Done
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
This PR cleans up the deprecated legacy config options that were
deprecated in nushell version 0.72.0. These are the config points that
were in the root of the config but also duplicated in the nested
structures. For instance `use_ls_colors` was in the root of the config
and also in the `ls.use_ls_colors` nested structure. This was originally
done to preserve backwards compatibility when nested structures were
introduced in the config file.
Here's a list of the legacy config points that were removed.
- `use_ls_colors` - previously replaced with `ls.use_ls_colors`
- `rm_always_trash` - previously replaced with `rm.always_trash`
- `history_file_format` - previously replaced with `history.file_format`
- `sync_history_on_enter` - previously replaced with
`history.sync_on_enter`
- `max_history_size` - previously replaced with `history.max_size`
- `quick_completions` - previously replaced with `completions.quick`
- `partial_completions` - previously replaced with `completions.partial`
- `max_external_completion_results` - previously replaced with
`completions.external.max_results`
- `completion_algorithm` - previously replaced with
`completions.algorithm`
- `case_sensitive_completions` - previously replaced with
`completions.case_sensitive`
- `enable_external_completion` - previously replaced with
`completions.external.enable`
- `external_completer` - previously replaced with
`completions.external.completer`
- `table_mode` - previously replaced with `table.mode`
- `table_index_mode` - previously replaced with `table.index_mode`
- `table_trim` - previously replaced with `table.trim`
- `show_clickable_links_in_ls` - previously replaced with
`ls.clickable_links`
- `cd_with_abbreviations` - previously replaced with `cd.abbreviations`
- `filesize_metric` - previously replaced with `filesize.metric`
- `filesize_format` - previously replaced with `filesize.format`
- `cursor_shape_vi_insert` - previously replaced with
`cursor_shape.vi_insert`
- `cursor_shape_vi_normal` - previously replaced with
`cursor_shape.vi_normal`
- `cursor_shape_emacs` - previously replaced with `cursor_shape.emacs`
Removes log_level from the config since it doesn't do anything any
longer. We moved log-level to a nushell parameter some time ago.
Renames history_isolation to isolation in the config.nu for consistency.
Fixes a couple bugs where values weren't being set in the "//
Reconstruct" sections (history_isolation, table_show_empty).
Reorganized/Moved things around a tiny bit and added a few comments.
# User-Facing Changes
history.histor_isolation is now history.isolation.
If anyone is still using the legacy config points, deprecated since
0.72.0 2022-11-29, their config will break.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
In my view we should revert nushell/nushell#8395 for now
## Potentially inconsistent application of semantic change
#8395 (1d5e7b441b) was loosening the type
coercion rules significantly, to let missing data / void returns that
were either expressed by `PipelineData::Empty` or the `Value::nothing`
be accept by specifically those commands/operations that made use of
`PipelineData::into_iter_strict()`. This could apply the new rules
inconsistently.
## Turning explicit failures into silent continuations
Furthermore the effect of this breaking change to the missing data
semantics could make previous errors into silent failures.
This could either just reduce the effectiveness of teaching error
messages in interactive use:
### Contrived example before
```bash
> cd . | where blah
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #13:1:1]
1 │ cd . | where blah
· ──┬──┬
· │ ╰── input type: null
· ╰── only list, binary, raw data or range input data is supported
╰────
```
### ...after, with #8395
```bash
> cd . | where blah
╭────────────╮
│ empty list │
╰────────────╯
```
In rare cases people could already try to rely on catching an error of a
downstream command to actually deal with the missing data, so it would
be a breaking change for their existing code.
## Problem with `PipelineData::into_iter_strict()`
Maybe this makes `_strict` a bit of a misnomer for this particular
iterator construction.
Further we did not actively test the `PipelineData::empty` branch before
## Parsimonious solution exists
For the motivating issue https://github.com/nushell/nushell/issues/8393
there already exists a fix that makes `ls` more consistent with the type
system by returning an empty `Value::List`
https://github.com/nushell/nushell/pull/8439
# Description
This allows empty pipelines to pass their emptiness through a filter.
This helps fix issues like trying to run a filter on an `ls` in an empty
directory. It also feels a bit more reasonable that a filter filters
what is *there* but doesn't require something to be there.
fixes#8393
# User-Facing Changes
No breaking changes (that I know of). Should allow filtering to be a
little less surprising with emptiness.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: amtoine <stevan.antoine@gmail.com>
# Description
Fixes a small bug with `rm` where names of files which couldn't be
deleted due to error were not printed.
Fixes https://github.com/nushell/nushell/issues/9004
# User-Facing Changes
Slightly different error message than previously. Nothing significant,
though.
The new error message looks like this
```
~/Projects/rust/nushell> rm /proc/1/mem 05/06/2023 01:13:23 PM
Error: nu:🐚:remove_not_possible
× Remove not possible
╭─[entry #3:1:1]
1 │ rm /proc/1/mem
· ─────┬─────
· ╰── Could not delete /proc/1/mem: Operation not permitted (os error 1)
╰────
```
or when using a glob (only showing a single entry for brevity)
```
Error: nu:🐚:remove_not_possible
× Remove not possible
╭─[entry #2:1:1]
1 │ rm --recursive --force --verbose /proc/1/*
· ────┬────
· ╰── Could not delete /proc/1/comm: Operation not permitted (os error 1)
╰────
```
# Tests + Formatting
No new unit tests were added for this change as it is pretty difficult
to test this particular case. However, manual testing was run with the
following commands
```
rm /proc/1/mem
rm --recursive --force --verbose /proc/1/*
```
# After Submitting
N/A
This PR reverts https://github.com/nushell/nushell/pull/9391
We try not to revert PRs like this, though after discussion with the
Nushell team, we decided to revert this one.
The main reason is that Nushell, as a codebase, isn't ready for these
kinds of optimisations. It's in the part of the development cycle where
our main focus should be on improving the algorithms inside of Nushell
itself. Once we have matured our algorithms, then we can look for
opportunities to switch out technologies we're using for alternate
forms.
Much of Nushell still has lots of opportunities for tuning the codebase,
paying down technical debt, and making the codebase generally cleaner
and more robust. This should be the focus. Performance improvements
should flow out of that work.
Said another, optimisation that isn't part of tuning the codebase is
premature at this stage. We need to focus on doing the hard work of
making the engine, parser, etc better.
# User-Facing Changes
Reverts the HashMap -> ahash change.
cc @FilipAndersson245
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Added comments to support API docs for the `nu-plugin` crate. Removed a
few items that I'd expect should only be used internally to Nushell from
the documentation and reduced the visibility of some items that did not
need to be public.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
There should be no user facing impact.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Standard tests run. Additionally numerous doctests were added to the
`nu-plugin` crate.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
No changes to the website necessary.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR removes ZB and ZiB from file size type, as they
were showing incorrect values due to an integer overflow.
Fixes: #9337
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
see https://github.com/nushell/nushell/issues/9390
using `ahash` instead of the default hasher. this will not affect
compile time as we where already building `ahash`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #9165
It's because `sys` returns a lazy record, and `insert`, `update`,
`upsert` can't operate on lazy record yet.
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes the clippy warnings we're about to get hit with next time we
upgrade Rust.
The big one was shrinking ShellError and related under 128 bytes.
# User-Facing Changes
Shouldn't notice much difference. In theory, we could see a tiny perf
improvement, but I didn't notice one.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This removes some unnecessary SyntaxShapes when parsing a
SyntaxShape::Any. Recent updates to the parser look for `{` and then
handle the logic for that separately.
# User-Facing Changes
This may have a slight parser speedup.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#9254.
# User-Facing Changes
upserting data of a cellpath that doesn't exist into a record now
creates the cellpath.
# Tests + Formatting
```
~/CodingProjects/nushell> mut a = {}
~/CodingProjects/nushell> $a.b.c = 99
~/CodingProjects/nushell> $a
╭───┬────────────╮
│ │ ╭───┬────╮ │
│ b │ │ c │ 99 │ │
│ │ ╰───┴────╯ │
╰───┴────────────╯
```
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Despite the innocent-looking title, this PR involves quite a few backend
changes as the existing LazyRecord trait was not at all friendly towards
the idea of these values being generated on the fly from Nu code.
In particular, here are a few changes involved:
- The LazyRecord trait now involves a lifetime `'a`, and this lifetime
is used in the return value of `get_column_names`. This means it no
longer returns `'static str`s (but implementations still can return
these). This is more stringent on the consumption side.
- The LazyRecord trait now must be able to clone itself via a new
`clone_value` method (as requiring `Clone` is not object safe). This
pattern is borrowed from `Value::CustomValue`.
- LazyRecord no longer requires being serde serializable and
deserializable.
These, in hand, allow for the following:
- LazyRecord can now clone itself, which means that they don't have to
be collected into a Record when being cloned.
- This is especially useful in Stack, which is cloned on each repl line
and in a few other cases. This would mean that _every_ LazyRecord
instance stored in a variable would be collected in its entirety and
cloned, which can be catastrophic for performance. See: `let nulol =
$nu`.
- LazyRecord's columns don't have to be static, they can have the same
lifetime of the struct itself, so different instances of the same
LazyRecord type can have different columns and values (like the new
`NuLazyRecord`)
- Serialization and deserialization are no longer meaningless, they are
simply less.
I would consider this PR very "drafty", but everything works. It
probably requires some cleanup and testing, though, but I'd like some
eyes and pointers first.
# User-Facing Changes
New command. New restrictions are largely internal. Maybe there are some
plugins affected?
Example of new command's usage:
```
lazy make --columns [a b c] --get-value { |name| print $"getting ($name)"; $name | str upcase }
```
You can also trivially implement something like `lazy make record` to
take a record of closures and turn it into a getter-like lazy struct:
```
def "lazy make record" [
record: record
] {
let columns = ($record | columns)
lazy make --columns $columns --get-value { |col| do ($record | get $col) }
}
```
Open to bikeshedding. `lazy make` is similar to `error make` which is
also in the core commands. I didn't like `make lazy` since it sounded
like some transformation was going on.
# Tour for reviewers
Take a look at LazyMake's examples. They have `None` as the results, as
such they aren't _really_ correct and aren't being tested at all. I
didn't do this because creating the Value::LazyRecord is a little tricky
and didn't want to risk messing it up, especially as the necessary
variables aren't available when creating the examples (like stack and
engine state).
Also take a look at NuLazyRecord's get_value implementation, or in
general. It uses an Arc<Mutex<_>> for the stack, which must be accessed
mutably for eval_block but get_value only provides us with a `&self`.
This is a sad state of affairs, but I don't know if there's a better
way.
On the same code path, we also have pipeline handling, and any pipeline
that isn't a Pipeline::Value will return Value::nothing. I believe
returning a Value::Error is probably better, or maybe some other
handling. Couldn't decide on which ShellError to settle with for that
branch.
The "unfortunate casualty" in the columns.rs file. I'm not sure just how
bad that is, though, I simply had to fight a little with the borrow
checker.
A few leftover comments like derives, comments about the now
non-existing serde requirements, and impls. I'll definitely get around
to those eventually but they're in atm
Should NuLazyRecord implement caching? I'm leaning heavily towards
**yes**, this was one of the main reasons not to use a record of
closures (besides convenience), but maybe it could be opt-out. I'd
wonder about its implementation too, but a simple way would be to move a
HashMap into the mutex state and keep cached values there.
# Description
Fixes: #8565
Here is another pr #7240 tried to address the issue, but it works in a
wrong way.
After this change `o+e>` won't redirect all stdout message then stderr
message and it works more like how bash does.
# User-Facing Changes
For the given python code:
```python
# test.py
import sys
print('aa'*300, flush=True)
print('bb'*999999, file=sys.stderr, flush=True)
print('cc'*300, flush=True)
```
Running `python test.py out+err> a.txt` shoudn't hang nushell, and
`a.txt` keeps output in the same order
## About the change
The core idea is that when doing lite-parsing, introduce a new variant
`LiteElement::SameTargetRedirection` if we meet `out+err>` redirection
token(which is generated by lex function),
During converting from lite block to block,
LiteElement::SameTargetRedirection will be converted to
PipelineElement::SameTargetRedirection.
Then in the block eval process, if we get
PipelineElement::SameTargetRedirection, we'll invoke `run-external` with
`--redirect-combine` flag, then pipe the result into save command
## What happened internally?
Take the following command as example:
`^ls o+e> log.txt`
lex parsing result(`Tokens`) are not changed, but `LiteBlock` and
`Block` is changed after this pr.
### LiteBlock before
```rust
LiteBlock {
block: [
LitePipeline { commands: [
Command(None, LiteCommand { comments: [], parts: [Span { start: 39041, end: 39044 }] }),
// actually the span of first Redirection is wrong too..
Redirection(Span { start: 39058, end: 39062 }, StdoutAndStderr, LiteCommand { comments: [], parts: [Span { start: 39050, end: 39057 }] }),
]
}]
}
```
### LiteBlock after
```rust
LiteBlock {
block: [
LitePipeline {
commands: [
SameTargetRedirection {
cmd: (None, LiteCommand { comments: [], parts: [Span { start: 147945, end: 147948}]}),
redirection: (Span { start: 147949, end: 147957 }, LiteCommand { comments: [], parts: [Span { start: 147958, end: 147965 }]})
}
]
}
]
}
```
### Block before
```rust
Pipeline {
elements: [
Expression(None, Expression {
expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 39042, end: 39044 }, ty: String, custom_completion: None }, [], false),
span: Span { start: 39041, end: 39044 },
ty: Any, custom_completion: None
}),
Redirection(Span { start: 39058, end: 39062 }, StdoutAndStderr, Expression { expr: String("out.txt"), span: Span { start: 39050, end: 39057 }, ty: String, custom_completion: None })] }
```
### Block after
```rust
Pipeline {
elements: [
SameTargetRedirection {
cmd: (None, Expression {
expr: ExternalCall(Expression { expr: String("ls"), span: Span { start: 147946, end: 147948 }, ty: String, custom_completion: None}, [], false),
span: Span { start: 147945, end: 147948},
ty: Any, custom_completion: None
}),
redirection: (Span { start: 147949, end: 147957}, Expression {expr: String("log.txt"), span: Span { start: 147958, end: 147965 },ty: String,custom_completion: None}
}
]
}
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when I run clippy locally, I get something like following
warning:
<img width="1383" alt="Screenshot 2023-05-15 at 22 34 57"
src="https://github.com/nushell/nushell/assets/22256154/4d4254bc-9e42-437e-9169-d15e9a97aa57">
This pr is going to fix it
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
closes#8934
this pr improves the diagnostic emitted when the name and parameters of
either `def`, `def-env` or `extern` are not separated by a space
```nu
Error:
× no space between name and parameters
╭─[entry #1:1:1]
1 │ def err[] {}
· ▲
· ╰── expected space
╰────
help: consider adding a space between the `def` command's name and its parameters
```
from
```nu
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #1:1:1]
1 │ def err[] {}
╰────
help: Usage: def <def_name> <params> <body>
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: Jelle Besseling <jelle@pingiun.com>
(*third* try at posting this PR, #9104, like #9084, got polluted with
unrelated commits. I'm never going to pull from the github feature
branch again!)
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Show parameter defaults in scope command signature, where they're
available for display by help.
per https://github.com/nushell/nushell/issues/8928.
I found unexpected ramifications in one completer (NuHelpCompleter) and
plugins, which both use the flag-formatting routine from builtin help.
For the moment I made the minimum necessary changes to get the mainline
scenario to pass tests and run. But we should circle back on what to do
with plugins and help completer..
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
1. New `parameter_default` column to `signatures` table in
`$nu.scope.commands`
It is populated with whatever parameters can be defaulted: currently
positional args and named flags.
2. Built in help (both `help <command>` and `<command> --help` will
display the defaults
3. Help completer will display defaults for flags, but not for
positionals.
Example:
A custom command with some default parameters:
```
〉cat ~/work/dflts.nu
# sample function to show defaults in help
export def main [
arg1: string # mandatory positional
arg2:string=abc # optional positional
--switch # no default here
--named:int # named flag, no default
--other:string=def # flag
--hard:record<foo:int bar:string, bas:bool> # default can be compound type
= {foo:22, bar:"other worlds", bas:false}
] { {arg1: $arg1,
arg2: $arg2,
switch: $switch,
named: $named,
other: $other,
hard: $hard, }
}
〉use ~/work/dflts.nu
〉$nu.scope.commands | where name == 'dflts' | get signatures.0.any | reject short_flag description custom_completion
╭───┬────────────────┬────────────────┬──────────────────────────────────────────┬─────────────┬───────────────────────────╮
│ # │ parameter_name │ parameter_type │ syntax_shape │ is_optional │ parameter_default │
├───┼────────────────┼────────────────┼──────────────────────────────────────────┼─────────────┼───────────────────────────┤
│ 0 │ │ input │ any │ false │ │
│ 1 │ arg1 │ positional │ string │ false │ │
│ 2 │ arg2 │ positional │ string │ true │ abc │
│ 3 │ switch │ switch │ │ true │ │
│ 4 │ named │ named │ int │ true │ │
│ 5 │ other │ named │ string │ true │ def │
│ 6 │ hard │ named │ record<foo: int, bar: string, bas: bool> │ true │ ╭───────┬───────────────╮ │
│ │ │ │ │ │ │ foo │ 22 │ │
│ │ │ │ │ │ │ bar │ other worlds │ │
│ │ │ │ │ │ │ bas │ false │ │
│ │ │ │ │ │ ╰───────┴───────────────╯ │
│ 7 │ │ output │ any │ false │ │
╰───┴────────────────┴────────────────┴──────────────────────────────────────────┴─────────────┴───────────────────────────╯
〉help dflts
sample function to show defaults in help
Usage:
> dflts {flags} <arg1> (arg2)
Flags:
--switch - switch -- no default here
--named <Int> - named flag, typed, but no default
--other <String> - flag with default (default: 'def')
--hard <Record([("foo", Int), ("bar", String), ("bas", Boolean)])> - default can be compound type (default: {foo: 22, bar: 'other worlds', bas: false})
-h, --help - Display the help message for this command
Parameters:
arg1 <string>: mandatory positional
arg2 <string>: optional positional (optional, default: 'abc')
```
Compared to (relevant bits of) help output previously:
```
Flags:
-h, --help - Display the help message for this command
-, --switch - no default here
-, --named <int> - named flag, no default
-, --other <string> - flag
-, --hard <record<foo: int, bar: string, bas: bool>> - default can be compound type
Signatures:
<any> | dflts <string> <string> -> <any>
Parameters:
arg1 <string>: mandatory positional
(optional) arg2 <string>: optional positional
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> [x] toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Follow-up of #8940. As @bobhy pointed out, it makes sense for the
behaviour of flags to match the one for positional arguments, where
default values are of type `Option<Value>` instead of
`Option<Expression>`.
# User-Facing Changes
The same ones from the original PR:
- Flag default values will now be parsed as constants.
- If the default value is not a constant, a parser error is displayed.
# Tests + Formatting
A [new
test](e34e2d35f4/src/tests/test_engine.rs (L338-L344))
has been added to verify the new restriction.
# Description
This PR impacts the nushell sqlite history only.
This is the first PR that enables history isolation in nushell for the
sqlite history. Hopefully, we can continue building on this.
This PR allows "history isolation" which means that other nushell
session's history won't be available in the current session when using
the uparrow/downarrow history navigation. This change only impacts the
uparrow downarrow history navigation.
What remains to be done is making ctrl+r history menu respect this
setting too. Right now, the history menu will still show you all entries
from all sessions.
The history command also shows all history items from all sessions. This
may remain unchanged since you can just filter by history session right
now.
This also fixes a bug where the session id is 0 in the sqlite history
since my April 18th reedline PR.
Closes#9064
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#8939.
# User-Facing Changes
- Parameter default values will now be parsed as constants.
- If the default value is not a constant, a parser error is displayed.
# Tests + Formatting
The [only affected
test](d42c2b2dbc/src/tests/test_engine.rs (L325-L328))
has been updated to reflect the new behavior.
# Description
follow up to #8529
cleaned up version of #8892
- the original syntax is okay
```nu
def okay [rec: record] {}
```
- you can now add type annotations for fields if you know
them before hand
```nu
def okay [rec: record<name: string>] {}
```
- you can specify multiple fields
```nu
def okay [person: record<name: string age: int>] {}
# an optional comma is allowed
def okay [person: record<name: string, age: int>] {}
```
- if annotations are specified, any use of the command will be type
checked against the specified type
```nu
def unwrap [result: record<ok: bool, value: any>] {}
unwrap {ok: 2, value: "value"}
# errors with
Error: nu::parser::type_mismatch
× Type mismatch.
╭─[entry #4:1:1]
1 │ unwrap {ok: 2, value: "value"}
· ───────┬─────
· ╰── expected record<ok: bool, value: any>, found record<ok: int, value: string>
╰────
```
> here the error is in the `ok` field, since `any` is coerced into any
type
> as a result `unwrap {ok: true, value: "value"}` is okay
- the key must be a string, either quoted or unquoted
```nu
def err [rec: record<{}: list>] {}
# errors with
Error:
× `record` type annotations key not string
╭─[entry #7:1:1]
1 │ def unwrap [result: record<{}: bool, value: any>] {}
· ─┬
· ╰── must be a string
╰────
```
- a key doesn't have to have a type in which case it is assumed to be
`any`
```nu
def okay [person: record<name age>] {}
def okay [person: record<name: string age>] {}
```
- however, if you put a colon, you have to specify a type
```nu
def err [person: record<name: >] {}
# errors with
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #12:1:1]
1 │ def unwrap [res: record<name: >] { $res }
· ┬
· ╰── expected type after colon
╰────
```
# User-Facing Changes
**[BREAKING CHANGES]**
- this change adds a field to `SyntaxShape::Record` so any plugins that
used it will have to update and include the field. though if you are
unsure of the type the record expects, `SyntaxShape::Record(vec![])`
will suffice
# Description
This PR changes the `ast` command to be able to output `--json` as well
as `nuon` (default) with "pretty" and "minified" output. I'm hoping this
functionality will be usable in the vscode extension for semantic
tokenization and highlighting.
# User-Facing Changes
There's a new `--json`/`-j` option. Prior version output of nuon is
maintained as default.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Close: #8988
Thanks to new crossterm version, nushell can support blink cursor shape.
It can be config with the following value:
1. blink_block
2. blink_line
3. blink_underscore
And original block, line, underscore will be steady. It also fixes wrong
shape of `underscore`.
# User-Facing Changes
Here is a little breaking change, before the change: `line` cursor shape
is blinking line, but after this pr, it will be `steady line`. To make a
blink line, we need to change the value to `blink_line`.
But I think it's ok, because after the change, we have a good naming
convention about the name of shape
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This does a lookup in the cache of parsed files to see if a span can be
found for a file that was previously loaded with the same contents, then
uses that span to find the parsed block for that file. The end result
should, in theory, be identical but doesn't require any reparsing or
creating new blocks/new definitions that aren't needed.
This drops the sg.nu benchmark from:
```
╭───┬───────────────────╮
│ 0 │ 280ms 606µs 208ns │
│ 1 │ 282ms 654µs 416ns │
│ 2 │ 252ms 640µs 541ns │
│ 3 │ 250ms 940µs 41ns │
│ 4 │ 241ms 216µs 375ns │
│ 5 │ 257ms 310µs 583ns │
│ 6 │ 196ms 739µs 416ns │
╰───┴───────────────────╯
```
to:
```
╭───┬───────────────────╮
│ 0 │ 118ms 698µs 125ns │
│ 1 │ 121ms 327µs │
│ 2 │ 121ms 873µs 500ns │
│ 3 │ 124ms 94µs 708ns │
│ 4 │ 113ms 733µs 291ns │
│ 5 │ 108ms 663µs 125ns │
│ 6 │ 63ms 482µs 625ns │
╰───┴───────────────────╯
```
I was hoping to also see some startup time improvements, but I didn't
notice much there.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
this pr condenses `MutBuiltinVar`, `LetBuiltinVar` and `ConstBuiltinVar`
into one error:
```nu
Error: nu::parser::name_is_builtin_var
× `in` used as variable name.
╭─[entry #69:1:1]
1 │ let in = 420
· ─┬
· ╰── already a builtin variable
╰────
help: 'in' is the name of a builtin Nushell variable and cannot be used
as a variable name
```
it also fixes this case which was previously not handled
```nu
let $nu = 420 # this variable would have been 'lost'
```
# Description
Trying a few different things to hopefully speedup startup a bit. I'm
seeing some improvement on my box for the profiles I have, but the data
I'm seeing is noisy.
- Remove allocations in a few places where we created vec's but could
use iterators
- Pre-allocate space for blocks based on the lite block
- Removed a few extra clones
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
_Fixes #5923_
Currently `nushell` doesn't allow short flag batches to contain
arguments, despite this being a common pattern in commands like `git
commit -am 'My commit message'`. This PR relaxes this so that the last
flag in the batch can take an argument.
# User-Facing Changes
- `nu::parser::short_flag_arg_cant_take_arg` has been replaced by
`nu::parser::only_last_flag_in_batch_can_take_arg` and is displayed when
a flag other then the last in a short flag batch takes an argument.
# Tests + Formatting
- Both
[`test_parser.rs`](48af0ebc3c/crates/nu-parser/tests/test_parser.rs (L640-L704))
and
[`test_known_external.rs`](48af0ebc3c/src/tests/test_known_external.rs (L42-L61))
have been updated to test the new allowed and disallowed scenarios.
---------
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
This relaxes the closure syntax so that `||` is no longer required. This
allows for `ls | each { $in.name }` for example.
I've gone ahead and changed the syntax highlighting so that blocks and
closures are distinct for now.
# User-Facing Changes
Removes `||` requirement for closures.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
We were seeing duplicate entries for the std lib files, and this PR
addresses that. Each file should now only be added once.
Note: they are still parsed twice because it's hard to recover the
module from the output of `parse` but a bit of clever hacking in a
future PR might be able to do that.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests/run.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
now nu_std only depends on nu_parser, nu_protocol and miette
and removes the nu_cli dependency
this enables developers moving forward to come along and implement their
own CLI's without having to pull in a redundant nu-cli which will not be
needed for them.
I did this by moving report_error into nu_protocol
which nu_std already has a dependency on anyway....
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-std/tests.nu` to run the tests for the
standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# Description
This improves the operation mismatch error in a few ways:
* We now detect if the left-hand side of the operation is at fault, and
show a simpler error/error message if it is
* Removed the unhelpful hint
* Updated the error text to make it clear what types are causing the
issue
# User-Facing Changes
Error texts and spans will change
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This is a pretty heavy refactor of the parser to support multiple parser
errors. It has a few issues we should address before landing:
- [x] In some cases, error quality has gotten worse `1 / "bob"` for
example
- [x] if/else isn't currently parsing correctly
- probably others
# User-Facing Changes
This may have error quality degradation as we adjust to the new error
reporting mechanism.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Prevents redefining fields in a record, for example `{a: 1, a: 2}` would
now error.
fixes https://github.com/nushell/nushell/issues/8699
# User-Facing Changes
Is technically a breaking change. If you relied on this behaviour to
give you the last value, your code will now error.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This PR makes `?` work with `reject`. For example:
```bash
> {} | reject foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #2:1:1]
1 │ {} | reject foo
· ───┬── ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
> {} | reject foo?
╭──────────────╮
│ empty record │
╰──────────────╯
```
This was prompted by [a user
question](https://discord.com/channels/601130461678272522/614593951969574961/1091466428546306078).
I would like to get this in for 0.78, I think it's low-risk and I want
the `?` feature to be as polished as possible for its debut.
# Description
Adds two more patterns when working with lists:
```
[1, ..$remainder]
```
and
```
[1, ..]
```
The first one collects the remaining items and assigns them into the
variable. The second one ignores any remaining values.
# User-Facing Changes
Adds more capability to list pattern matching.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- crates/nu-utils/standard_library/tests.nu` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds `|` patterns to `match`, allowing you to try multiple patterns for
the same case.
Example:
```
match {b: 1} { {a: $b} | {b: $b} => { print $b } }
```
Variables that don't bind are set to `$nothing` so that they can be
later checked.
This PR also:
fixes#8631
Creates a set of integration tests for pattern matching also
# User-Facing Changes
Adds `|` to `match`. Fixes variable binding scope.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This removes autoprinting the final value of a loop, much in the same
spirit as not autoprinting values at the end of statements. As we fix
these corner cases, it becomes more consistent that to print to the
screen in a script, you use the `print` command.
This gives a noticeable performance improvement as a bonus.
Before:
```
C:\Source\nushell〉 for x in 1..10 { $x }
1
2
3
4
5
6
7
8
9
10
```
Now:
```
C:\Source\nushell〉 for x in 1..10 { $x }
C:\Source\nushell〉
```
# User-Facing Changes
**BREAKING CHANGE**
Loops like `for`, `loop`, and `while` will no longer automatically print
loop values to the screen.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Prior to this PR, the less/greater than operators (`<`, `>`, `<=`, `>=`)
would throw an error if either side was null. After this PR, these
operators return null if either side (or both) is null.
### Examples
```bash
1 < 3 # true
1 < null # null
null < 3 # null
null < null # null
```
### Motivation
JT [asked the C#
folks](https://discord.com/channels/601130461678272522/615329862395101194/1086137515053957140)
and this is apparently the approach they would choose for comparison
operators if they could start from scratch.
This PR makes `where` more convenient to use on jagged/missing data. For
example, we can now filter on columns that may not be present in every
row:
```
> [{foo: 123} {}] | where foo? > 10
╭───┬─────╮
│ # │ foo │
├───┼─────┤
│ 0 │ 123 │
╰───┴─────╯
```
# Description
This does a few speedups for tight loops:
* Caches the DeclId for `table` so we don't look it up. This means users
can't easily replace the default one, we might want to talk about this
tradeoff. The lookup for finding `table` in a tight loop is currently
pretty heavy. Might be another way to speed this up.
* `table` no longer pre-calculates the width. Instead, it only
calculates the width when printing a table or record.
* Use more efficient way of collecting the block of each loop
* When printing output, only get the config when needed
Combined, this drops the runtime from a million loop tight iteration
from 1sec 8ms to 236ms.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Some minor code cleanup.
We've accumulated a few macros over the years that arguably don't need
to be macros. This PR removes 4 macros by either:
1. Inlining the macro
2. Replacing the macro with a local function
3. Replacing the macro with a closure
# Description
Add float, string, and date patterns to matcher.
This could probably use some tests 😅
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This moves the representation of variables on the stack to a Vec, which
more closely resembles a stack. For small numbers of variables live at
any one point, this tends to be more efficient than a HashMap. Having a
stack-like vector also allows us to remember a stack position,
temporarily push variables on, then quickly drop the stack back to the
original size when we're done. We'll need this capability to allow
matching inside of conditions.
On this mac, a simple run of:
`timeit { mut x = 1; while $x < 1000000 { $x += 1 } }`
Went from 1 sec 86 ms, down to 1 sec 2 ms. Clearly, we have a lot more
ground we can make up in looping speed 😅 but it's nice that for fixing
this to make matching easier, we also get a win in terms of lookup speed
for small numbers of variables.
# User-Facing Changes
Likely users won't (hopefully) see any negative impact and may even see
a small positive impact.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds `match` and basic pattern matching.
An example:
```
match $x {
1..10 => { print "Value is between 1 and 10" }
{ foo: $bar } => { print $"Value has a 'foo' field with value ($bar)" }
[$a, $b] => { print $"Value is a list with two items: ($a) and ($b)" }
_ => { print "Value is none of the above" }
}
```
Like the recent changes to `if` to allow it to be used as an expression,
`match` can also be used as an expression. This allows you to assign the
result to a variable, eg) `let xyz = match ...`
I've also included a short-hand pattern for matching records, as I think
it might help when doing a lot of record patterns: `{$foo}` which is
equivalent to `{foo: $foo}`.
There are still missing components, so consider this the first step in
full pattern matching support. Currently missing:
* Patterns for strings
* Or-patterns (like the `|` in Rust)
* Patterns for tables (unclear how we want to match a table, so it'll
need some design)
* Patterns for binary values
* And much more
# User-Facing Changes
[see above]
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow-up to https://github.com/nushell/nushell/pull/8379 and
https://github.com/nushell/nushell/discussions/8502.
This PR makes it so that the new `?` syntax for marking a path member as
optional short-circuits, as voted on in the
[8502](https://github.com/nushell/nushell/discussions/8502) poll.
Previously, `{ foo: 123 }.bar?.baz` would raise an error:
```
> { foo: 123 }.bar?.baz
× Data cannot be accessed with a cell path
╭─[entry #15:1:1]
1 │ { foo: 123 }.bar?.baz
· ─┬─
· ╰── nothing doesn't support cell paths
╰────
```
Here's what was happening:
1. The `bar?` path member access returns `nothing` because there is no field named `bar` on the record
2. The `baz` path member access fails when trying to access a `baz` field on that `nothing` value
After this change, `{ foo: 123 }.bar?.baz` returns `nothing`; the failed `bar?` access immediately returns `nothing` and the `baz` access never runs.
# Description
Add a `command_not_found` function to `$env.config.hooks`. If this
function outputs a string, then it's included in the `help`.
An example hook on *Arch Linux*, to find packages that contain the
binary, looks like:
```nushell
let-env config = {
# ...
hooks: {
command_not_found: {
|cmd_name| (
try {
let pkgs = (pkgfile --binaries --verbose $cmd_name)
(
$"(ansi $env.config.color_config.shape_external)($cmd_name)(ansi reset) " +
$"may be found in the following packages:\n($pkgs)"
)
} catch {
null
}
)
}
# ...
```
# User-Facing Changes
- Add a `command_not_found` function to `$env.config.hooks`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
when running the tests inside nu-protocol we were getting a compiler
warning...
this PR removes the compiler warning from nu-protocol.
by adding
```rust
#[allow(unused_imports)]
```
Reverts nushell/nushell#8310
In anticipation that we may want to revert this PR. I'm starting the
process because of this issue.
This stopped working
```
let-env NU_LIB_DIRS = [
($nu.config-path | path dirname | path join 'scripts')
'C:\Users\username\source\repos\forks\nu_scripts'
($nu.config-path | path dirname)
]
```
You have to do this now instead.
```
const NU_LIB_DIRS = [
'C:\Users\username\AppData\Roaming\nushell\scripts'
'C:\Users\username\source\repos\forks\nu_scripts'
'C:\Users\username\AppData\Roaming\nushell'
]
```
In talking with @kubouch, he was saying that the `let-env` version
should keep working. Hopefully it's a small change.
# Description
Allow NU_LIBS_DIR and friends to be const they can be updated within the
same parse pass. This will allow us to remove having multiple config
files eventually.
Small implementation detail: I've changed `call.parser_info` to a
hashmap with string keys, so the information can have names rather than
indices, and we don't have to worry too much about the order in which we
put things into it.
Closes https://github.com/nushell/nushell/issues/8422
# User-Facing Changes
In a single file, users can now do stuff like
```
const NU_LIBS_DIR = ['/some/path/here']
source script.nu
```
and the source statement will use the value of NU_LIBS_DIR declared the
line before.
Currently, if there is no `NU_LIBS_DIR` const, then we fallback to using
the value of the `NU_LIBS_DIR` env-var, so there are no breaking changes
(unless someone named a const NU_LIBS_DIR for some reason).
# Tests + Formatting
~~TODO: write tests~~ Done
# After Submitting
~~TODO: update docs~~ Will do when we update default_env.nu/merge
default_env.nu into default_config.nu.
# Description
Resolves issue #8370
Adds the following flags to commands `from csv` and `from tsv`:
- `--flexible`: allow the number of fields in records to be variable
- `-c --comment`: a comment character to ignore lines starting with it
- `-q --quote`: a quote character to ignore separators in strings,
defaults to '\"'
- `-e --escape`: an escape character for strings containing the quote
character
Internally, the `Value` struct has an additional helper function
`as_char` which converts it to a single `char`
# User-Facing Changes
The single quoted string `'\t'` can no longer be used as a parameter for
the flag `--separator '\t'` as it is interpreted as a two-character
string. One needs to use from now on the flag with a double quoted
string like so: `-s "\t"` which correctly interprets the string as a
single `char`.
# Description
This fixes the `commandline` command when it's run with no arguments, so
it outputs the command being run. New line characters are included.
This allows for:
- [A way to get current command inside pre_execution hook · Issue #6264
· nushell/nushell](https://github.com/nushell/nushell/issues/6264)
- The possibility of *Atuin* to work work *Nushell*. *Atuin* hooks need
to know the current repl input before it is run.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This reverts commit dec0a2517f.
It breaks programs like `fzf`
# Description
Fixes: #8472
Fixes: #8313Reopen: #7690
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
This is a follow up from https://github.com/nushell/nushell/pull/7540.
Please provide feedback if you have the time!
## Summary
This PR lets you use `?` to indicate that a member in a cell path is
optional and Nushell should return `null` if that member cannot be
accessed.
Unlike the previous PR, `?` is now a _postfix_ modifier for cell path
members. A cell path of `.foo?.bar` means that `foo` is optional and
`bar` is not.
`?` does _not_ suppress all errors; it is intended to help in situations
where data has "holes", i.e. the data types are correct but something is
missing. Type mismatches (like trying to do a string path access on a
date) will still fail.
### Record Examples
```bash
{ foo: 123 }.foo # returns 123
{ foo: 123 }.bar # errors
{ foo: 123 }.bar? # returns null
{ foo: 123 } | get bar # errors
{ foo: 123 } | get bar? # returns null
{ foo: 123 }.bar.baz # errors
{ foo: 123 }.bar?.baz # errors because `baz` is not present on the result from `bar?`
{ foo: 123 }.bar.baz? # errors
{ foo: 123 }.bar?.baz? # returns null
```
### List Examples
```
〉[{foo: 1} {foo: 2} {}].foo
Error: nu:🐚:column_not_found
× Cannot find column
╭─[entry #30:1:1]
1 │ [{foo: 1} {foo: 2} {}].foo
· ─┬ ─┬─
· │ ╰── cannot find column 'foo'
· ╰── value originates here
╰────
〉[{foo: 1} {foo: 2} {}].foo?
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ │
╰───┴───╯
〉[{foo: 1} {foo: 2} {}].foo?.2 | describe
nothing
〉[a b c].4? | describe
nothing
〉[{foo: 1} {foo: 2} {}] | where foo? == 1
╭───┬─────╮
│ # │ foo │
├───┼─────┤
│ 0 │ 1 │
╰───┴─────╯
```
# Breaking changes
1. Column names with `?` in them now need to be quoted.
2. The `-i`/`--ignore-errors` flag has been removed from `get` and
`select`
1. After this PR, most `get` error handling can be done with `?` and/or
`try`/`catch`.
4. Cell path accesses like this no longer work without a `?`:
```bash
〉[{a:1 b:2} {a:3}].b.0
2
```
We had some clever code that was able to recognize that since we only
want row `0`, it's OK if other rows are missing column `b`. I removed
that because it's tricky to maintain, and now that query needs to be
written like:
```bash
〉[{a:1 b:2} {a:3}].b?.0
2
```
I think the regression is acceptable for now. I plan to do more work in
the future to enable streaming of cell path accesses, and when that
happens I'll be able to make `.b.0` work again.
# Description
The correction made here concerns the issue #8431. Indeed, the algorithm
initially proposed to remove elements of a `vector` performed a loop
with `remove` and an incident therefore appeared when several values
were equal because the deletion was done outside the length of the
vector:
```rust
let mut found = false;
for (i, col) in cols.clone().iter().enumerate() {
if col == col_name {
cols.remove(i);
vals.remove(i);
found = true;
}
}
```
Then, `[[a, a]; [1, 2]] | reject a: ` gave `thread 'main' panicked at
'removal index (is 1) should be < len (is 1)',
crates/nu-protocol/src/value/mod.rs:1213:54`.
The proposed correction is therefore the implementation of the
`retain_mut` utility dedicated to this functionality.
```rust
let mut found = false;
let mut index = 0;
cols.retain_mut(|col| {
if col == col_name {
found = true;
vals.remove(index);
false
} else {
index += 1;
true
}
});
```
# Description
Our `ShellError` at the moment has a `std::mem::size_of<ShellError>` of
136 bytes (on AMD64). As a result `Value` directly storing the struct
also required 136 bytes (thanks to alignment requirements).
This change stores the `Value::Error` `ShellError` on the heap.
Pro:
- Value now needs just 80 bytes
- Should be 1 cacheline less (still at least 2 cachelines)
Con:
- More small heap allocations when dealing with `Value::Error`
- More heap fragmentation
- Potential for additional required memcopies
# Further code changes
Includes a small refactor of `try` due to a type mismatch in its large
match.
# User-Facing Changes
None for regular users.
Plugin authors may have to update their matches on `Value` if they use
`nu-protocol`
Needs benchmarking to see if there is a benefit in real world workloads.
**Update** small improvements in runtime for workloads with high volume
of values. Significant reduction in maximum resident set size, when many
values are held in memory.
# Tests + Formatting
# Description
This works around a bug introduced by #8058
We should revisit the original fix, as it makes some assumptions about
how stdout redirection is used by `table`. We use the stdout by default
for table regularly during a repl session, so we should instead
special-case case for handling externals.
# User-Facing Changes
Restores the original default `table` behaviour for binary data
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
in https://github.com/nushell/nushell/issues/8311 and the discord
server, the idea of moving the default banner from the `rust` source to
the `nushell` standar library has emerged 😋
however, in order to do this, one need to have access to all the
variables used in the default banner => all of them are accessible
because known constants, except for the startup time of the shell, which
is not anywhere in the shell...
#### this PR adds exactly this, i.e. the new `startup_time` to the `$nu`
variable, which is computed to have the exact same value as the value
shown in the banner.
## the changes
in order to achieve this, i had to
- add `startup_time` as an `i64` to the `EngineState` => this is, to the
best of my knowledge, the easiest way to pass such an information around
down to where the banner startup time is computed and where the `$nu`
variable is evaluated
- add `startup-time` to the `$nu` variable and use the `EngineState`
getter for `startup_time` to show it as a `Value::Duration`
- pass `engine_state` as a `&mut`able argument from `main.rs` down to
`repl.rs` to allow the setter to change the value of `startup_time` =>
without this, the value would not change and would show `-1ns` as the
default value...
- the value of the startup time is computed in `evaluate_repl` in
`repl.rs`, only once at the beginning, and the same value is used in the
default banner 👌
# User-Facing Changes
one can now access to the same time as shown in the default banner with
```bash
$nu.startup-time
```
# Tests + Formatting
- 🟢 `cargo fmt --all`
- 🟢 `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- 🟢 `cargo test --workspace`
# After Submitting
```
$nothing
```
Add two rows in `$nu`, `$nu.is-interactive` and `$nu.is-login`, which
are true when nu is run in interactive and login mode respectively.
The `-i` flag now behaves a bit more like that of bash's, where the any
provided command or file is run without REPL but in "interactive mode".
This should entail sourcing interactive-mode config files, but since we
are planning on overhauling the config system soon, I'm holding off on
that. For now, all `-i` does is set `$nu.is-interactive` to be true.
About testing, I can't seem to find where cli-args get tested, so I
haven't written any new tests for this. Also I don't think there are any
docs that need updating. However if I'm wrong please tell me.
# Description
Hides https://github.com/nushell/nushell/pull/7925 from config and
disables by default. Option is still present in config, just hidden.
# User-Facing Changes
Users can no longer find `table.show_empty` in config and it is set to
false by default.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fix for data ambiguity noted in #8244.
Basic change is to use nanosecond resolution for unix timestamps (stored
in type Int). Previously, a timestamp might have seconds, milliseconds
or nanoseconds, but it turned out there were overlaps in data ranges
between different resolutions, so there wasn't always a unique mapping
back to date/time.
Due to higher precision, the *range* of dates that timestamps can map to
is restricted. Unix timestamps with seconds resolution and 64 bit
storage can cover all dates from the Big Bang to eternity. Timestamps
with seconds resolution and 32 bit storage can only represent dates from
1901-12-13 through 2038-01-19. The nanoseconds resolution and 64 bit
storage used with this fix can represent dates from 1677-09-21T00:12:44
to 2262-04-11T23:47:16, something of a compromise.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
## `<datetime> | into int`
Converts to nanosecond resolution
```rust
〉date now | into int
1678084730502126846
```
This is the number of non-leap nanoseconds after the unix epoch date:
1970-01-01T00:00:00+00:00.
Conversion fails for dates outside the supported range:
```rust
〉1492-10-12 | into int
Error: nu:🐚:incorrect_value
× Incorrect value.
╭─[entry #51:1:1]
1 │ 1492-10-12 | into int
· ────┬───
· ╰── DateTime out of timestamp range 1677-09-21T00:12:43 and 2262-04-11T23:47:16
╰────
```
## `<int> | into datetime`
Can no longer fail or produce incorrect results for any 64-bit input:
```rust
〉0 | into datetime
Thu, 01 Jan 1970 00:00:00 +0000 (53 years ago)
〉"7fffffffffffffff" | into int -r 16 | into datetime
Fri, 11 Apr 2262 23:47:16 +0000 (in 239 years)
〉("7fffffffffffffff" | into int -r 16) * -1 | into datetime
Tue, 21 Sep 1677 00:12:43 +0000 (345 years ago)
```
## `<date> | date to-record` and `<date> | date to-table`
Now both have a `nanosecond` field.
```rust
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-record
╭────────────┬───────────╮
│ year │ 2262 │
│ month │ 4 │
│ day │ 11 │
│ hour │ 23 │
│ minute │ 47 │
│ second │ 16 │
│ nanosecond │ 854775807 │
│ timezone │ +00:00 │
╰────────────┴───────────╯
〉"7fffffffffffffff" | into int -r 16 | into datetime | date to-table
╭───┬──────┬───────┬─────┬──────┬────────┬────────┬────────────┬──────────╮
│ # │ year │ month │ day │ hour │ minute │ second │ nanosecond │ timezone │
├───┼──────┼───────┼─────┼──────┼────────┼────────┼────────────┼──────────┤
│ 0 │ 2262 │ 4 │ 11 │ 23 │ 47 │ 16 │ 854775807 │ +00:00 │
╰───┴──────┴───────┴─────┴──────┴────────┴────────┴────────────┴──────────╯
```
This change was not mandated by the OP problem, but it is nice to be
able to see the nanosecond bits that were present in Nushell `date` type
all along.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#8341.
The `CustomValue::to_json()` function is an odd duck; it defaults to
returning `null`, and no `CustomValue` implementations override it to do
anything useful. I forgot to implement `to_json()` for `SQLiteDatabase`,
so `open foo.db | to json` was returning `null`.
To fix this, I've removed `CustomValue::to_json()` and now `to json`
will collect a `CustomValue` into a regular `Value` before doing a JSON
conversion.
Continuation of #8229 and #8326
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
# Call to action
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Commits (so far)
- Remove `ShellError::FeatureNotEnabled`
- Name fields on `SE::ExternalNotSupported`
- Name field on `SE::InvalidProbability`
- Name fields on `SE::NushellFailed` variants
- Remove unused `SE::NushellFailedSpannedHelp`
- Name field on `SE::VariableNotFoundAtRuntime`
- Name fields on `SE::EnvVarNotFoundAtRuntime`
- Name fields on `SE::ModuleNotFoundAtRuntime`
- Remove usused `ModuleOrOverlayNotFoundAtRuntime`
- Name fields on `SE::OverlayNotFoundAtRuntime`
- Name field on `SE::NotFound`
Continuation of #8229
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
**Everyone:** Feel free to add review comments if you spot inconsistent
use of `ShellError` variants.
- Name fields of `SE::IncorrectValue`
- Merge and name fields on `SE::TypeMismatch`
- Name fields on `SE::UnsupportedOperator`
- Name fields on `AssignmentRequires*` and fix doc
- Name fields on `SE::UnknownOperator`
- Name fields on `SE::MissingParameter`
- Name fields on `SE::DelimiterError`
- Name fields on `SE::IncompatibleParametersSingle`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Description
The `ShellError` enum at the moment is kind of messy.
Many variants are basic tuple structs where you always have to reference
the implementation with its macro invocation to know which field serves
which purpose.
Furthermore we have both variants that are kind of redundant or either
overly broad to be useful for the user to match on or overly specific
with few uses.
So I set out to start fixing the lacking documentation and naming to
make it feasible to critically review the individual usages and fix
those.
Furthermore we can decide to join or split up variants that don't seem
to be fit for purpose.
Feel free to add review comments if you spot inconsistent use of
`ShellError` variants.
- Name fields on `ShellError::OperatorOverflow`
- Name fields on `ShellError::PipelineMismatch`
- Add doc to `ShellError::OnlySupportsThisInputType`
- Name `ShellError::OnlySupportsThisInputType`
- Name field on `ShellError::PipelineEmpty`
- Comment about issues with `TypeMismatch*`
- Fix a few `exp_input_type`s
- Name fields on `ShellError::InvalidRange`
# User-Facing Changes
(None now, end goal more explicit and consistent error messages)
# Tests + Formatting
(No additional tests needed so far)
# Description
This change fixes the bug associated with an incorrect span in
`type_mismatch` error message as described in #7288
The `span` argument in the method `into_value` was not being used to
convert a `PipelineData::Value` type so when called in
[eval_expression](https://github.com/nushell/nushell/blob/main/crates/nu-engine/src/eval.rs#L514-L515),
the original expression's span was not being used to overwrite the
result of `eval_subexpression`.
# User-Facing Changes
Using the example described in the issue, the whole bracketed
subexpression is correctly underlined.
Behavior before change:
```
let val = 10
($val | into string) + $val
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ ($val | into string) + $val
· ─────┬───── ┬ ──┬─
· │ │ ╰── int
· │ ╰── type mismatch for operator
· ╰── string
╰────
```
Behavior after change:
```
let val = 10
($val | into string) + $val
Error: nu:🐚:type_mismatch
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ ($val | into string) + $val
· ──────────┬───────── ┬ ──┬─
· │ │ ╰── int
· │ ╰── type mismatch for operator
· ╰── string
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR adds an alternative alias implementation. Old aliases still work
but you need to use `old-alias` instead of `alias`.
Instead of replacing spans in the original code and re-parsing, which
proved to be extremely error-prone and a constant source of panics, the
new implementation creates a new command that references the old
command. Consider the new alias defined as `alias ll = ls -l`. The
parser creates a new command called `ll` and remembers that it is
actually a `ls` command called with the `-l` flag. Then, when the parser
sees the `ll` command, it will translate it to `ls -l` and passes to it
any parameters that were passed to the call to `ll`. It works quite
similar to how known externals defined with `extern` are implemented.
The new alias implementation should work the same way as the old
aliases, including exporting from modules, referencing both known and
unknown externals. It seems to preserve custom completions and pipeline
metadata. It is quite robust in most cases but there are some rough
edges (see later).
Fixes https://github.com/nushell/nushell/issues/7648,
https://github.com/nushell/nushell/issues/8026,
https://github.com/nushell/nushell/issues/7512,
https://github.com/nushell/nushell/issues/5780,
https://github.com/nushell/nushell/issues/7754
No effect: https://github.com/nushell/nushell/issues/8122 (we might
revisit the completions code after this PR)
Should use custom command instead:
https://github.com/nushell/nushell/issues/6048
# User-Facing Changes
Since aliases are now basically commands, it has some new implications:
1. `alias spam = "spam"` (requires command call)
* **workaround**: use `alias spam = echo "spam"`
2. `def foo [] { 'foo' }; alias foo = ls -l` (foo defined more than
once)
* **workaround**: use different name (commands also have this
limitation)
4. `alias ls = (ls | sort-by type name -i)`
* **workaround**: Use custom command. _The common issue with this is
that it is currently not easy to pass flags through custom commands and
command referencing itself will lead to stack overflow. Both of these
issues are meant to be addressed._
5. TODO: Help messages, `which` command, `$nu.scope.aliases`, etc.
* Should we treat the aliases as commands or should they be separated
from regular commands?
6. Needs better error message and syntax highlight for recursed alias
(`alias f = f`)
7. Can't create alias with the same name as existing command (`alias ls
= ls -a`)
* Might be possible to add support for it (not 100% sure)
8. Standalone `alias` doesn't list aliases anymore
9. Can't alias parser keywords (e.g., stuff like `alias ou = overlay
use` won't work)
* TODO: Needs a better error message when attempting to do so
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR addresses issue #2047 in order to enable autocomplete
functionality when using sudo for executing commands. I'e done a couple
of auxiliary checks such as ignoring whitespace and the last pipe in
order to determine the last command.
# User-Facing Changes
The only user facing change should be the autocomplete working.
# Tests + Formatting
All tests and formatting pass.
# Screenshots
<img width="454" alt="image"
src="https://user-images.githubusercontent.com/4399118/219404037-6cce4358-68a9-42bb-a09b-2986b10fa6cc.png">
# Suggestions welcome
I still don't know the in's and out's if nushell very well, any
suggestions for improvements are welcome.
# Description
Fixes#8002, which expands ranges `1..3` to expand to array-like when
saving and converting to json. Now,
```
> 1..3 | save foo.json
# foo.json
[
1,
2,
3
]
> 1..3 | to json
[
1,
2,
3
]
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
issue #8167
Remove the `(link)` to the docs for `ShellError` and `ParseError`. As
per discussion on the issue, the nu-parser version didn't update on the
docs causing deadlinks for those errors, which brought the usefullness
of these links into question and it was decided to remove all of them
that `derive(diagnostic)`.
# User-Facing Changes
Before:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter (link)
× Unbalanced delimiter.
╭─[entry #1:1:1]
1 │ ls | get name}
· ▲
· ╰── unbalanced { and }
╰────
```
After:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter
× Unbalanced delimiter.
╭─[entry #1:1:1]
1 │ ls | get name}
· ▲
· ╰── unbalanced { and }
╰────
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug where a default list in a custom command parameter
wasn't being accepted. The reason was because it was comparing specific
types of list like `list<any>` != `list<string>`. So, this PR attempts
to fix that.
### Before
```
> def f [param: list = [one]] { echo $param }
Error: nu::parser::assignment_mismatch (link)
× Default value wrong type
╭─[entry #1:1:1]
1 │ def f [param: list = [one]] { echo $param }
· ──┬──
· ╰── default value not list<any>
╰────
```
### After
```
> def f [param: list = [one]] {echo $param}
> f
╭───┬─────╮
│ 0 │ one │
╰───┴─────╯
```
closes#8092
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, I found this feature is useful to me too :)
Closes: #8039
# User-Facing Changes
```
❯ 3 * "ab"
ababab
❯ 3 * [1 2 3]
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 1 │
│ 4 │ 2 │
│ 5 │ 3 │
│ 6 │ 1 │
│ 7 │ 2 │
│ 8 │ 3 │
╰───┴───╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This one fixes env not being hidden inside closure, reported in the
conversation under https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/6593https://github.com/nushell/nushell/issues/7937 still persist. These
seems a bit more involved and might need hidden env tracking also in the
engine state... I'm not yet sure what's causing it.
Also re-enables some env-related tests and removes unused Value clone.
# User-Facing Changes
Just a bugfix
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Improve error when `str replace <pattern>` detects a problem with
<pattern>.
# User-Facing Changes
New "Incorrect value" error:
```
〉 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
Error: nu:🐚:incorrect_value (link)
× Incorrect value.
╭─[entry #1:1:1]
1 │ 'C:\Users\kubouch' | str replace 'C:\Users' 'foo'
· ─────┬────
· ╰── Regex error: Parsing error at position 4: Invalid hex escape
╰────
```
We could fruitfully replace some of the current uses of
`ShellError::UnsupportedInput` with this error. 'Incorrect value' is
different from 'wrong type'
# Tests + Formatting
Don't forget to add tests that cover your changes.
* none added / changed.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Adds a `profile` command that profiles each pipeline element of a block
and can also recursively step into child blocks.
# Limitations
* It is implemented using pipeline metadata which currently get lost in
some circumstances (e.g.,
https://github.com/nushell/nushell/issues/4501). This means that the
profiler will lose data coming from subexpressions. This issue will
hopefully be solved in the future.
* It also does not step into individual loop iteration which I'm not
sure why but maybe that's a good thing.
# User-Facing Changes
Shouldn't change any existing behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
I noticed that `open some_big_file | into binary` cannot be cancelled
with `ctrl+c`.
This small PR fixes that by checking `ctrl+c` in
`RawStream::into_bytes()`, and does the same in
`RawStream::into_string()` for good measure.
This PR makes `++` (the append operator) work with strings and binary
values. Can now do things like:
```bash
〉"a" ++ "b"
ab
〉0x[01 02] ++ 0x[03]
Length: 3 (0x3) bytes | printable whitespace ascii_other non_ascii
00000000: 01 02 03 •••
```
Closes#8015.
# Description
This PR does the following:
1. Adds a new command called `view span` - which shows what is at the
location of the span parameters
2. Adds a new command called `view` - which just lists all the `view`
commands.
3. Renames `view-source` to `view source`.
4. Adds a new command called `view files` - which shows you what files
are loaded into nushell's EngineState memory.
5. Added a `Category::Debug` and put these commands (and others) into
it. (`inspect` needs to be added to it, but it's not landed yet)
Spans are important to nushell. One of their uses is to show where
errors are. For instance, in this example, the leader lines pointing to
parts of the command line are able to point to `10`, `/`, and `"bob"`
because each of those items have a span.
```
> 10 / "bob"
Error: nu::parser::unsupported_operation (link)
× Types mismatched for operation.
╭─[entry #8:1:1]
1 │ 10 / "bob"
· ─┬ ┬ ──┬──
· │ │ ╰── string
· │ ╰── doesn't support these values.
· ╰── int
╰────
help: Change int or string to be the right types and try again.
```
# Examples
## view span
Example:
```
> $env.config | get keybindings | first | debug -r
... bunch of stuff
span: Span {
start: 68065,
end: 68090,
},
},
],
span: Span {
start: 68050,
end: 68101,
},
},
],
span: Span {
start: 67927,
end: 68108,
},
}
```
To view the last span:
```
> view span 67927 68108
{
name: clear_everything
modifier: control
keycode: char_l
mode: emacs
event: [
{ send: clearscrollback }
]
}
```
> To view the 2nd to last span:
```
view span 68065 68090
{ send: clearscrollback }
```
> To view the 3rd to last span:
```
view span 68050 68101
[
{ send: clearscrollback }
]
```
## view files
```
> view files
╭────┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├────┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
│ 10 │ entry #1 │ 127561 │ 127585 │ 24 │
│ 11 │ entry #2 │ 127585 │ 127595 │ 10 │
╰────┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
`entry #x` will be each command you type in the repl (i think). so, it
may be good to filter those out sometimes.
```
> view files | where filename !~ entry
╭───┬───────────────────────────────────────────────────────┬────────┬────────┬───────╮
│ # │ filename │ start │ end │ size │
├───┼───────────────────────────────────────────────────────┼────────┼────────┼───────┤
│ 0 │ source │ 0 │ 2 │ 2 │
│ 1 │ Host Environment Variables │ 2 │ 6034 │ 6032 │
│ 2 │ C:\Users\a_username\AppData\Roaming\nushell\plugin.nu │ 6034 │ 31236 │ 25202 │
│ 3 │ C:\Users\a_username\AppData\Roaming\nushell\env.nu │ 31236 │ 44961 │ 13725 │
│ 4 │ C:\Users\a_username\AppData\Roaming\nushell\config.nu │ 44961 │ 76134 │ 31173 │
│ 5 │ defs.nu │ 76134 │ 91944 │ 15810 │
│ 6 │ prompt\oh-my.nu │ 91944 │ 111523 │ 19579 │
│ 7 │ weather\get-weather.nu │ 111523 │ 125556 │ 14033 │
│ 8 │ .zoxide.nu │ 125556 │ 127504 │ 1948 │
│ 9 │ source │ 127504 │ 127561 │ 57 │
╰───┴───────────────────────────────────────────────────────┴────────┴────────┴───────╯
```
# User-Facing Changes
I renamed `view-source` to `view source` just to make a group of
commands. No functionality has changed in `view source`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR attempts to fix the completions issue where, on Windows,
completions wouldn't get generated from items in your path environment
variable. This seemed to be down to `PATH` vs `Path`. So, I tried to add
a new function that we can use anywhere to avoid this problem.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, we can't provide examples for plugin commands, this pr would
make it possible
# User-Facing Changes
Take plugin `nu-example-1` as example:
```
❯ nu-example-1 -h
PluginSignature test 1 for plugin. Returns Value::Nothing
Usage:
> nu-example-1 {flags} <a> <b> (opt) ...(rest)
Flags:
-h, --help - Display the help message for this command
-f, --flag - a flag for the signature
-n, --named <String> - named string
Parameters:
a <int>: required integer value
b <string>: required string value
(optional) opt <int>: Optional number
...rest <string>: rest value string
Examples:
running example with an int value and string value
> nu-example-1 3 bb
```
The examples session is newly added.
## Basic idea behind these changes
when nushell query plugin signatures, plugin just returns it's signature
without any examples, so nushell have no idea about the examples of
plugin commands.
To adding the feature, we just making plugin returns it's signature with
examples.
Before:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<Signature>
```
After:
```
1. get signature
---------------->
Nushell ------------------ Plugin
<-----------------
2. returns Vec<PluginSignature>
```
When writing plugin signature to $nu.plugin-path:
Serialize `<PluginSignature>` rather than `<Signature>`, which would
enable us to serialize examples to `$nu.plugin-path`
## Shortcoming
It's a breaking changes because `Plugin::signature` is changed, and it
requires plugin authors to change their code for new signatures.
Fortunally it should be easy to change, for rust based plugin, we just
need to make a global replace from word `Signature` to word
`PluginSignature` in their plugin project.
Our content of plugin-path is really large, if one plugin have many
examples, it'd results to larger body of $nu.plugin-path, which is not
really scale. A solution would be save register information in other
binary formats rather than `json`. But I think it'd be another story.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR will help report a bad date that can't be converted where the
error message says `* Unable to parse datetime`. This is helpful when
you're converting a big table and it fails somewhere that you really
can't see. I put it in `[]` so that when it's null, you can see that
there should be something there.
Before:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime
╭─[entry #1:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
After:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)
× Unable to parse datetime: [Tue 1 0].
╭─[entry #4:1:1]
1 │ 'Tue 1 0' | into datetime
· ────┬────
· ╰── datetime parsing failed
╰────
help: Examples of supported inputs:
* "5 pm"
* "2020/12/4"
* "2020.12.04 22:10 +2"
* "2020-04-12 22:10:57 +02:00"
* "2020-04-12T22:10:57.213231+02:00"
* "Tue, 1 Jul 2003 10:52:37 +0200"
```
# User-Facing Changes
New format for the error message.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Closes#6768.
BEFORE:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [table 5 rows] │
╰─────┴────────────────╯
```
AFTER:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [list 5 items] │
╰─────┴────────────────╯
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Lint: `clippy::uninlined_format_args`
More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)
Alternative to #7865
# User-Facing Changes
None intended
# Tests + Formatting
(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
I noticed that [it's pretty easy to name threads in
Rust](https://doc.rust-lang.org/std/thread/#naming-threads). We might as
well do this; it's a nice quality of life improvement when you're
profiling something and the developers took the time to give threads
names.
Also added/cleaned up some comments while I was in the area.
# Description
This PR bumps the required rust version to 1.66.1.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Small fix. Related: #7699.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This adds the `SyntaxShape::Decimal` so you can create custom commands
with `decimal` types such as:
```shell
def cmd [x:decimal] { echo $x }
```
/cc @kurokirasama
Internally this is a little messy since we have `Type::Float` and
`SyntaxShape::Decimal`. I originally named it `float` and
`SyntaxShape::Float` but since we have `into decimal` and `1.1 |
describe` reports `decimal`, I decided to change the SyntaxShape.
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
