# Description
Lint: `clippy::uninlined_format_args`
More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)
Alternative to #7865
# User-Facing Changes
None intended
# Tests + Formatting
(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
# Description
This PR changes the old performance logging with `Instant` timers. I'm
not sure if this is the best way to do it but it does help reveal where
time is being spent on startup. This is what it looks like when you
launch nushell with `cargo run -- --log-level info`. I'm using the
`info` log level exclusively for performance monitoring at this point.
## After Startup
Since you're in the repl, you can continue running commands. Here's the
output of `ls`, for instance.
Note that the above screenshots are in debug mode, so they're much
slower than release.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Fixes#7342. `0..1000 | table` before this change:
`0..1000 | table` after this change:
When piping data to `table`, pages were not getting a newline at the
end[^1]. This problem was uncovered and exacerbated by the new
`display_output` hook which implicitly piped _everything_ to `table`.
## The Fix
`PagingTableCreator` now adds a newline to each page instead of relying
on later code to do it.
## Tests
I spent a while trying to write a regression test for this behaviour but
I couldn't get the test to fail before my fix! I think the test
infrastructure does something special with newlines when it's checking
command output. I eventually ran out of steam trying to investigate
that, sorry.
[^1]: unless the pipe to table was the implicit one that's done when
there is no `display_output` hook set. That situation was still working
OK.
# Description
While perusing Value.rs, I noticed the `Value::int()`, `Value::float()`,
`Value::boolean()` and `Value::string()` constructors, which seem
designed to make it easier to construct various Values, but which aren't
used often at all in the codebase. So, using a few find-replaces
regexes, I increased their usage. This reduces overall LOC because
structures like this:
```
Value::Int {
val: a,
span: head
}
```
are changed into
```
Value::int(a, head)
```
and are respected as such by the project's formatter.
There are little readability concerns because the second argument to all
of these is `span`, and it's almost always extremely obvious which is
the span at every callsite.
# User-Facing Changes
None.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Also enforce this by #[non_exhaustive] span such that going forward we
cannot, in debug builds (1), construct invalid spans.
The motivation for this stems from #6431 where I've seen crashes due to
invalid slice indexing.
My hope is this will mitigate such senarios
1. https://github.com/nushell/nushell/pull/6431#issuecomment-1278147241
# Description
(description of your pull request here)
# Tests
Make sure you've done the following:
- [ ] Add tests that cover your changes, either in the command examples,
the crate/tests folder, or in the /tests folder.
- [ ] Try to think about corner cases and various ways how your changes
could break. Cover them with tests.
- [ ] If adding tests is not possible, please document in the PR body a
minimal example with steps on how to reproduce so one can verify your
change works.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [ ] `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- [ ] `cargo test --workspace --features=extra` to check that all the
tests pass
# Documentation
- [ ] If your PR touches a user-facing nushell feature then make sure
that there is an entry in the documentation
(https://github.com/nushell/nushell.github.io) for the feature, and
update it if necessary.
* New "display_output" hook.
* Fix unrelated "clippy" complaint in nu-tables crate.
* Fix code-formattng and style issues in "display_output" hook
* Enhance eval_hook to return PipelineData.
This allows a hook (including display_output) to return a value.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Remove comment
* Split delta and environment merging
* Move table mode to a more logical place
* Cleanup
* Merge environment after reading default_env.nu
* Fmt
* (WIP) Initial messy support for hooks as strings
* Cleanup after running condition & hook code
Also, remove prints
* Move env hooks eval into its own function
* Add env change hooks to simulator
* Fix hooks simulator not running env hooks properly
* Add missing hooks test file
* Expand hooks tests
* Add blocks as env hooks; Preserve hook environment
* Add full eval to pre prompt/exec hooks; Fix panic
* Rename env change hook back to orig. name
* Print err on test failure; Add list of hooks test
* Consolidate condition block; Fix panic; Misc
* CHange test to use real file
* Remove unused stuff
* Fix potential panics; Clean up errors
* Remove commented unused code
* Clippy: Fix extra references
* Add back support for old-style hooks
* Reorder functions; Fmt
* Fix test on Windows
* Add more test cases; Simplify some error reporting
* Add more tests for setting correct before/after
* Move pre_prompt hook to the beginning
Since we don't have a prompt or blocking on user input, all hooks just
follow after each other.
* only set cwd for child process if cwd exists, and avoid showing error when pwd is not exists
* better comment text
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* Add Nushell REPL simulator; Fix bug in overlay add
The `nu_repl` function takes an array of strings and processes them as
if they were REPL lines entered one by one. This helps to discover bugs
due to the state changes between the parse and eval stages.
* Fix REPL tests on Windows
* WIP: Start laying overlays
* Rename Overlay->Module; Start adding overlay
* Revamp adding overlay
* Add overlay add tests; Disable debug print
* Fix overlay add; Add overlay remove
* Add overlay remove tests
* Add missing overlay remove file
* Add overlay list command
* (WIP?) Enable overlays for env vars
* Move OverlayFrames to ScopeFrames
* (WIP) Move everything to overlays only
ScopeFrame contains nothing but overlays now
* Fix predecls
* Fix wrong overlay id translation and aliases
* Fix broken env lookup logic
* Remove TODOs
* Add overlay add + remove for environment
* Add a few overlay tests; Fix overlay add name
* Some cleanup; Fix overlay add/remove names
* Clippy
* Fmt
* Remove walls of comments
* List overlays from stack; Add debugging flag
Currently, the engine state ordering is somehow broken.
* Fix (?) overlay list test
* Fix tests on Windows
* Fix activated overlay ordering
* Check for active overlays equality in overlay list
This removes the -p flag: Either both parser and engine will have the
same overlays, or the command will fail.
* Add merging on overlay remove
* Change help message and comment
* Add some remove-merge/discard tests
* (WIP) Track removed overlays properly
* Clippy; Fmt
* Fix getting last overlay; Fix predecls in overlays
* Remove merging; Fix re-add overwriting stuff
Also some error message tweaks.
* Fix overlay error in the engine
* Update variable_completions.rs
* Adds flags and optional arguments to view-source (#5446)
* added flags and optional arguments to view-source
* removed redundant code
* removed redundant code
* fmt
* fix bug in shell_integration (#5450)
* fix bug in shell_integration
* add some comments
* enable cd to work with directory abbreviations (#5452)
* enable cd to work with abbreviations
* add abbreviation example
* fix tests
* make it configurable
* make cd recornize symblic link (#5454)
* implement seq char command to generate single character sequence (#5453)
* add tmp code
* add seq char command
* Add split number flag in `split row` (#5434)
Signed-off-by: Yuheng Su <gipsyh.icu@gmail.com>
* Add two more overlay tests
* Add ModuleId to OverlayFrame
* Fix env conversion accidentally activating overlay
It activated overlay from permanent state prematurely which would
cause `overlay add` to misbehave.
* Remove unused parameter; Add overlay list test
* Remove added traces
* Add overlay commands examples
* Modify TODO
* Fix $nu.scope iteration
* Disallow removing default overlay
* Refactor some parser errors
* Remove last overlay if no argument
* Diversify overlay examples
* Make it possible to update overlay's module
In case the origin module updates, the overlay add loads the new module,
makes it overlay's origin and applies the changes. Before, it was
impossible to update the overlay if the module changed.
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
Co-authored-by: pwygab <88221256+merelymyself@users.noreply.github.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
Co-authored-by: Yuheng Su <gipsyh.icu@gmail.com>
* Refactor usage of is_perf_true to be a parameter passed around
* Move repl loop and command/script execution to nu_cli
* Move config setup out of nu_cli
* Update config_files.rs
* Update main.rs
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
