# Description
Currently there is a bit of chaos regarding construction of history file
paths. Various pieces of code across a number of crates reimplement the
same/similar logic:
- There is `get_history_path`, but it requires a directory parameter (it
really just joins it with a file name).
- Some places use a const for the directory parameter, others use a
string literal - in all cases the value seems to be `"nushell"`.
- Some places assume the `"nushell"` value, other plumb it down from
close to the top of the call stack.
- Some places use a constant for history file names while others assume
it.
This PR tries to make it so that the history/config path format is
defined in a single places and so dependencies on it are easier to
follow:
- It removes `get_history_path` and adds a `file_path` method to
`HistoryConfig` instead (an extra motivation being, this is a convenient
place that can be used from all creates that need a history file path)
- Adds a `nu_config_dir` function that returns the nushell configuration
directory.
- Updates existing code to rely on the above, effectively removing
duplicate uses of `"nushell"` and `NUSHELL_FOLDER` and assumptions about
file names associated with different history formats
# User-Facing Changes
None
# Description
In this PR I replaced most of the raw usize IDs with
[newtypes](https://doc.rust-lang.org/rust-by-example/generics/new_types.html).
Some other IDs already started using new types and in this PR I did not
want to touch them. To make the implementation less repetitive, I made
use of a generic `Id<T>` with marker structs. If this lands I would try
to move make other IDs also in this pattern.
Also at some places I needed to use `cast`, I'm not sure if the type was
incorrect and therefore casting not needed or if actually different ID
types intermingle sometimes.
# User-Facing Changes
Probably few, if you got a `DeclId` via a function and placed it later
again it will still work.
# Description
Cleans up and refactors the config code using the `IntoValue` macro.
Shoutout to @cptpiepmatz for making the macro!
# User-Facing Changes
Should be none.
# After Submitting
Somehow refactor the reverse transformation.
# Description
Part 3 of replacing `std::path` types with `nu_path` types added in
#13115. This PR targets the paths listed in `$nu`. That is, the home,
config, data, and cache directories.
fixes https://github.com/nushell/nushell/issues/13378
# Description
This PR tries to improve usage of system APIs to determine the location
of vendored autoload files.
# User-Facing Changes
The paths listed in #13180 and #13217 are changing. This has not been
part of a release yet, so arguably the user facing changes are only to
unreleased features anyway.
# Tests + Formatting
Haven't done, but if someone wants to help me here, I'm open to doing
it. I just don't know how to properly test this.
# After Submitting
# Description
This grew quite a bit beyond its original scope, but I've tried to make
`$in` a bit more consistent and easier to work with.
Instead of the parser generating calls to `collect` and creating
closures, this adds `Expr::Collect` which just evaluates in the same
scope and doesn't require any closure.
When `$in` is detected in an expression, it is replaced with a new
variable (also called `$in`) and wrapped in `Expr::Collect`. During
eval, this expression is evaluated directly, with the input and with
that new variable set to the collected value.
Other than being faster and less prone to gotchas, it also makes it
possible to typecheck the output of an expression containing `$in`,
which is nice. This is a breaking change though, because of the lack of
the closure and because now typechecking will actually happen. Also, I
haven't attempted to typecheck the input yet.
The IR generated now just looks like this:
```gas
collect %in
clone %tmp, %in
store-variable $in, %tmp
# %out <- ...expression... <- %in
drop-variable $in
```
(where `$in` is the local variable created for this collection, and not
`IN_VARIABLE_ID`)
which is a lot better than having to create a closure and call `collect
--keep-env`, dealing with all of the capture gathering and allocation
that entails. Ideally we can also detect whether that input is actually
needed, so maybe we don't have to clone, but I haven't tried to do that
yet. Theoretically now that the variable is a unique one every time, it
should be possible to give it a type - I just don't know how to
determine that yet.
On top of that, I've also reworked how `$in` works in pipeline-initial
position. Previously, it was a little bit inconsistent. For example,
this worked:
```nushell
> 3 | do { let x = $in; let y = $in; print $x $y }
3
3
```
However, this causes a runtime variable not found error on the second
`$in`:
```nushell
> def foo [] { let x = $in; let y = $in; print $x $y }; 3 | foo
Error: nu:🐚:variable_not_found
× Variable not found
╭─[entry #115:1:35]
1 │ def foo [] { let x = $in; let y = $in; print $x $y }; 3 | foo
· ─┬─
· ╰── variable not found
╰────
```
I've fixed this by making the first element `$in` detection *always*
happen at the block level, so if you use `$in` in pipeline-initial
position anywhere in a block, it will collect with an implicit
subexpression around the whole thing, and you can then use that `$in`
more than once. In doing this I also rewrote `parse_pipeline()` and
hopefully it's a bit more straightforward and possibly more efficient
too now.
Finally, I've tried to make `let` and `mut` a lot more straightforward
with how they handle the rest of the pipeline, and using a redirection
with `let`/`mut` now does what you'd expect if you assume that they
consume the whole pipeline - the redirection is just processed as
normal. These both work now:
```nushell
let x = ^foo err> err.txt
let y = ^foo out+err>| str length
```
It was previously possible to accomplish this with a subexpression, but
it just seemed like a weird gotcha that you couldn't do it. Intuitively,
`let` and `mut` just seem to take the whole line.
- closes#13137
# User-Facing Changes
- `$in` will behave more consistently with blocks and closures, since
the entire block is now just wrapped to handle it if it appears in the
first pipeline element
- `$in` no longer creates a closure, so what can be done within an
expression containing `$in` is less restrictive
- `$in` containing expressions are now type checked, rather than just
resulting in `any`. However, `$in` itself is still `any`, so this isn't
quite perfect yet
- Redirections are now allowed in `let` and `mut` and behave pretty much
how you'd expect
# Tests + Formatting
Added tests to cover the new behaviour.
# After Submitting
- [ ] release notes (definitely breaking change)
# Description
Allows `Stack` to have a modified local `Config`, which is updated
immediately when `$env.config` is assigned to. This means that even
within a script, commands that come after `$env.config` changes will
always see those changes in `Stack::get_config()`.
Also fixed a lot of cases where `engine_state.get_config()` was used
even when `Stack` was available.
Closes#13324.
# User-Facing Changes
- Config changes apply immediately after the assignment is executed,
rather than whenever config is read by a command that needs it.
- Potentially slower performance when executing a lot of lines that
change `$env.config` one after another. Recommended to get `$env.config`
into a `mut` variable first and do modifications, then assign it back.
- Much faster performance when executing a script that made
modifications to `$env.config`, as the changes are only parsed once.
# Tests + Formatting
All passing.
# After Submitting
- [ ] release notes
# Description
This PR adds an internal representation language to Nushell, offering an
alternative evaluator based on simple instructions, stream-containing
registers, and indexed control flow. The number of registers required is
determined statically at compile-time, and the fixed size required is
allocated upon entering the block.
Each instruction is associated with a span, which makes going backwards
from IR instructions to source code very easy.
Motivations for IR:
1. **Performance.** By simplifying the evaluation path and making it
more cache-friendly and branch predictor-friendly, code that does a lot
of computation in Nushell itself can be sped up a decent bit. Because
the IR is fairly easy to reason about, we can also implement
optimization passes in the future to eliminate and simplify code.
2. **Correctness.** The instructions mostly have very simple and
easily-specified behavior, so hopefully engine changes are a little bit
easier to reason about, and they can be specified in a more formal way
at some point. I have made an effort to document each of the
instructions in the docs for the enum itself in a reasonably specific
way. Some of the errors that would have happened during evaluation
before are now moved to the compilation step instead, because they don't
make sense to check during evaluation.
3. **As an intermediate target.** This is a good step for us to bring
the [`new-nu-parser`](https://github.com/nushell/new-nu-parser) in at
some point, as code generated from new AST can be directly compared to
code generated from old AST. If the IR code is functionally equivalent,
it will behave the exact same way.
4. **Debugging.** With a little bit more work, we can probably give
control over advancing the virtual machine that `IrBlock`s run on to
some sort of external driver, making things like breakpoints and single
stepping possible. Tools like `view ir` and [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir) make it easier than
before to see what exactly is going on with your Nushell code.
The goal is to eventually replace the AST evaluator entirely, once we're
sure it's working just as well. You can help dogfood this by running
Nushell with `$env.NU_USE_IR` set to some value. The environment
variable is checked when Nushell starts, so config runs with IR, or it
can also be set on a line at the REPL to change it dynamically. It is
also checked when running `do` in case within a script you want to just
run a specific piece of code with or without IR.
# Example
```nushell
view ir { |data|
mut sum = 0
for n in $data {
$sum += $n
}
$sum
}
```
```gas
# 3 registers, 19 instructions, 0 bytes of data
0: load-literal %0, int(0)
1: store-variable var 904, %0 # let
2: drain %0
3: drop %0
4: load-variable %1, var 903
5: iterate %0, %1, end 15 # for, label(1), from(14:)
6: store-variable var 905, %0
7: load-variable %0, var 904
8: load-variable %2, var 905
9: binary-op %0, Math(Plus), %2
10: span %0
11: store-variable var 904, %0
12: load-literal %0, nothing
13: drain %0
14: jump 5
15: drop %0 # label(0), from(5:)
16: drain %0
17: load-variable %0, var 904
18: return %0
```
# Benchmarks
All benchmarks run on a base model Mac Mini M1.
## Iterative Fibonacci sequence
This is about as best case as possible, making use of the much faster
control flow. Most code will not experience a speed improvement nearly
this large.
```nushell
def fib [n: int] {
mut a = 0
mut b = 1
for _ in 2..=$n {
let c = $a + $b
$a = $b
$b = $c
}
$b
}
use std bench
bench { 0..50 | each { |n| fib $n } }
```
IR disabled:
```
╭───────┬─────────────────╮
│ mean │ 1ms 924µs 665ns │
│ min │ 1ms 700µs 83ns │
│ max │ 3ms 450µs 125ns │
│ std │ 395µs 759ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
IR enabled:
```
╭───────┬─────────────────╮
│ mean │ 452µs 820ns │
│ min │ 427µs 417ns │
│ max │ 540µs 167ns │
│ std │ 17µs 158ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
##
[gradient_benchmark_no_check.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/gradient_benchmark_no_check.nu)
IR disabled:
```
╭───┬──────────────────╮
│ 0 │ 27ms 929µs 958ns │
│ 1 │ 21ms 153µs 459ns │
│ 2 │ 18ms 639µs 666ns │
│ 3 │ 19ms 554µs 583ns │
│ 4 │ 13ms 383µs 375ns │
│ 5 │ 11ms 328µs 208ns │
│ 6 │ 5ms 659µs 542ns │
╰───┴──────────────────╯
```
IR enabled:
```
╭───┬──────────────────╮
│ 0 │ 22ms 662µs │
│ 1 │ 17ms 221µs 792ns │
│ 2 │ 14ms 786µs 708ns │
│ 3 │ 13ms 876µs 834ns │
│ 4 │ 13ms 52µs 875ns │
│ 5 │ 11ms 269µs 666ns │
│ 6 │ 6ms 942µs 500ns │
╰───┴──────────────────╯
```
##
[random-bytes.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/random-bytes.nu)
I got pretty random results out of this benchmark so I decided not to
include it. Not clear why.
# User-Facing Changes
- IR compilation errors may appear even if the user isn't evaluating
with IR.
- IR evaluation can be enabled by setting the `NU_USE_IR` environment
variable to any value.
- New command `view ir` pretty-prints the IR for a block, and `view ir
--json` can be piped into an external tool like [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir).
# Tests + Formatting
All tests are passing with `NU_USE_IR=1`, and I've added some more eval
tests to compare the results for some very core operations. I will
probably want to add some more so we don't have to always check
`NU_USE_IR=1 toolkit test --workspace` on a regular basis.
# After Submitting
- [ ] release notes
- [ ] further documentation of instructions?
- [ ] post-release: publish `nu_plugin_explore_ir`
This reverts commit 0cfd5fbece.
The original PR messed up syntax higlighting of aliases and causes
panics of completion in the presence of alias.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Part of https://github.com/nushell/nushell/issues/12963, step 2.
This PR refactors Call and related argument structures to remove their
dependency on `Expression::span` which will be removed in the future.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none. If you see some error messages that look broken, please
report.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR implements script or module autoloading. It does this by finding
the `$nu.vendor-autoload-dir`, lists the contents and sorts them by file
name. These files are evaluated in that order.
To see what's going on, you can use `--log-level warn`
```
❯ cargo r -- --log-level warn
Finished dev [unoptimized + debuginfo] target(s) in 0.58s
Running `target\debug\nu.exe --log-level warn`
2024-06-24 09:23:20.494 PM [WARN ] nu::config_files: set_config_path() cwd: "C:\\Users\\fdncred\\source\\repos\\nushell", default_config: config.nu, key: config-path, config_file_specified: None
2024-06-24 09:23:20.495 PM [WARN ] nu::config_files: set_config_path() cwd: "C:\\Users\\fdncred\\source\\repos\\nushell", default_config: env.nu, key: env-path, config_file_specified: None
2024-06-24 09:23:20.629 PM [WARN ] nu::config_files: setup_config() config_file_specified: None, env_file_specified: None, login: false
2024-06-24 09:23:20.660 PM [WARN ] nu::config_files: read_config_file() config_file_specified: None, is_env_config: true
Hello, from env.nu
2024-06-24 09:23:20.679 PM [WARN ] nu::config_files: read_config_file() config_file_specified: None, is_env_config: false
Hello, from config.nu
Hello, from defs.nu
Activating Microsoft Visual Studio environment.
2024-06-24 09:23:21.398 PM [WARN ] nu::config_files: read_vendor_autoload_files() src\config_files.rs:234:9
2024-06-24 09:23:21.399 PM [WARN ] nu::config_files: read_vendor_autoload_files: C:\ProgramData\nushell\vendor\autoload
2024-06-24 09:23:21.399 PM [WARN ] nu::config_files: AutoLoading: "C:\\ProgramData\\nushell\\vendor\\autoload\\01_get-weather.nu"
2024-06-24 09:23:21.675 PM [WARN ] nu::config_files: AutoLoading: "C:\\ProgramData\\nushell\\vendor\\autoload\\02_temp.nu"
2024-06-24 09:23:21.817 PM [WARN ] nu_cli::repl: Terminal doesn't support use_kitty_protocol config
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds a directory to the `$nu` constant that shows where the
system level autoload directory is located at. This folder is modifiable
at compile time with environment variables.
```rust
// Create a system level directory for nushell scripts, modules, completions, etc
// that can be changed by setting the NU_VENDOR_AUTOLOAD_DIR env var on any platform
// before nushell is compiled OR if NU_VENDOR_AUTOLOAD_DIR is not set for non-windows
// systems, the PREFIX env var can be set before compile and used as PREFIX/nushell/vendor/autoload
// pseudo code
// if env var NU_VENDOR_AUTOLOAD_DIR is set, in any platform, use it
// if not, if windows, use ALLUSERPROFILE\nushell\vendor\autoload
// if not, if non-windows, if env var PREFIX is set, use PREFIX/share/nushell/vendor/autoload
// if not, use the default /usr/share/nushell/vendor/autoload
```
### Windows default
```nushell
❯ $nu.vendor-autoload-dir
C:\ProgramData\nushell\vendor\autoload
```
### Non-Windows default
```nushell
❯ $nu.vendor-autoload-dir
/usr/local/share/nushell/vendor/autoload
```
### Non-Windows with PREFIX set
```nushell
❯ PREFIX=/usr/bob cargo r
❯ $nu.vendor-autoload-dir
/usr/bob/share/nushell/vendor/autoload
```
### Non-Windows with NU_VENDOR_AUTOLOAD_DIR set
```nushell
❯ NU_VENDOR_AUTOLOAD_DIR=/some/other/path/nushell/stuff cargo r
❯ $nu.vendor-autoload-dir
/some/other/path/nushell/stuff
```
> [!IMPORTANT]
To be clear, this PR does not do the auto-loading, it just sets up the
folder to support that functionality that can be added in a later PR.
The PR also does not create the folder defined. It's just setting the
$nu constant.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is an attempt to add a standard location for people to put
completions in. I saw this topic come up again recently and IIRC we
decided to create a standard location. I used the dirs-next crate to
dictate where these locations are. I know some people won't like that
but at least this gets the ball rolling in a direction that has a
standard directory.
This is what the default NU_LIB_DIRS looks like now in the
default_env.nu. It should also be like this when starting nushell with
`nu -n`
```nushell
$env.NU_LIB_DIRS = [
($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
($nu.data-dir | path join 'completions') # default home for nushell completions
]
```
I also added these default folders to the `$nu` variable so now there is
`$nu.data-path` and `$nu.cache-path`.
## Data Dir Default
While I was in there, I also decided to add a cache dir
## Cache Dir Default
### This is what the default looks like in Ubuntu.
### This is what it looks like with XDG_CACHE_HOME and XDG_DATA_HOME
overridden
```nushell
XDG_DATA_HOME=/tmp/data_home XDG_CACHE_HOME=/tmp/cache_home cargo r
```
### This is what the defaults look like in Windows (username scrubbed to
protect the innocent)
How my NU_LIB_DIRS is set in the images above
```nushell
$env.NU_LIB_DIRS = [
($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
'/Users/fdncred/src/nu_scripts'
($nu.config-path | path dirname)
($nu.data-dir | path join 'completions') # default home for nushell completions
]
```
Let the debate begin.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Part of https://github.com/nushell/nushell/issues/12963, step 2.
This PR refactors changes the use of `expression.span` to
`expression.span_id` via a new helper `Expression::span()`. A new
`GetSpan` is added to abstract getting the span from both `EngineState`
and `StateWorkingSet`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`format pattern` loses the ability to use variables in the pattern,
e.g., `... | format pattern 'value of {$it.name} is {$it.value}'`. This
is because the command did a custom parse-eval cycle, creating spans
that are not merged into the main engine state. We could clone the
engine state, add Clone trait to StateDelta and merge the cloned delta
to the cloned state, but IMO there is not much value from having this
ability, since we have string interpolation nowadays: `... | $"value of
($in.name) is ($in.value)"`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR introduces a `ByteStream` type which is a `Read`-able stream of
bytes. Internally, it has an enum over three different byte stream
sources:
```rust
pub enum ByteStreamSource {
Read(Box<dyn Read + Send + 'static>),
File(File),
Child(ChildProcess),
}
```
This is in comparison to the current `RawStream` type, which is an
`Iterator<Item = Vec<u8>>` and has to allocate for each read chunk.
Currently, `PipelineData::ExternalStream` serves a weird dual role where
it is either external command output or a wrapper around `RawStream`.
`ByteStream` makes this distinction more clear (via `ByteStreamSource`)
and replaces `PipelineData::ExternalStream` in this PR:
```rust
pub enum PipelineData {
Empty,
Value(Value, Option<PipelineMetadata>),
ListStream(ListStream, Option<PipelineMetadata>),
ByteStream(ByteStream, Option<PipelineMetadata>),
}
```
The PR is relatively large, but a decent amount of it is just repetitive
changes.
This PR fixes#7017, fixes#10763, and fixes#12369.
This PR also improves performance when piping external commands. Nushell
should, in most cases, have competitive pipeline throughput compared to,
e.g., bash.
| Command | Before (MB/s) | After (MB/s) | Bash (MB/s) |
| -------------------------------------------------- | -------------:|
------------:| -----------:|
| `throughput \| rg 'x'` | 3059 | 3744 | 3739 |
| `throughput \| nu --testbin relay o> /dev/null` | 3508 | 8087 | 8136 |
# User-Facing Changes
- This is a breaking change for the plugin communication protocol,
because the `ExternalStreamInfo` was replaced with `ByteStreamInfo`.
Plugins now only have to deal with a single input stream, as opposed to
the previous three streams: stdout, stderr, and exit code.
- The output of `describe` has been changed for external/byte streams.
- Temporary breaking change: `bytes starts-with` no longer works with
byte streams. This is to keep the PR smaller, and `bytes ends-with`
already does not work on byte streams.
- If a process core dumped, then instead of having a `Value::Error` in
the `exit_code` column of the output returned from `complete`, it now is
a `Value::Int` with the negation of the signal number.
# After Submitting
- Update docs and book as necessary
- Release notes (e.g., plugin protocol changes)
- Adapt/convert commands to work with byte streams (high priority is
`str length`, `bytes starts-with`, and maybe `bytes ends-with`).
- Refactor the `tee` code, Devyn has already done some work on this.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
# Description
Refactors the code in `nu-cli`, `main.rs`, `run.rs`, and few others.
Namely, I added `EngineState::generate_nu_constant` function to
eliminate some duplicate code. Otherwise, I changed a bunch of areas to
return errors instead of calling `std::process::exit`.
# User-Facing Changes
Should be none.
This is the first PR towards migrating to a new `$env.PWD` API that
returns potentially un-canonicalized paths. Refer to PR #12515 for
motivations.
## New API: `EngineState::cwd()`
The goal of the new API is to cover both parse-time and runtime use
case, and avoid unintentional misuse. It takes an `Option<Stack>` as
argument, which if supplied, will search for `$env.PWD` on the stack in
additional to the engine state. I think with this design, there's less
confusion over parse-time and runtime environments. If you have access
to a stack, just supply it; otherwise supply `None`.
## Deprecation of other PWD-related APIs
Other APIs are re-implemented using `EngineState::cwd()` and properly
documented. They're marked deprecated, but their behavior is unchanged.
Unused APIs are deleted, and code that accesses `$env.PWD` directly
without using an API is rewritten.
Deprecated APIs:
* `EngineState::current_work_dir()`
* `StateWorkingSet::get_cwd()`
* `env::current_dir()`
* `env::current_dir_str()`
* `env::current_dir_const()`
* `env::current_dir_str_const()`
Other changes:
* `EngineState::get_cwd()` (deleted)
* `StateWorkingSet::list_env()` (deleted)
* `repl::do_run_cmd()` (rewritten with `env::current_dir_str()`)
## `cd` and `pwd` now use logical paths by default
This pulls the changes from PR #12515. It's currently somewhat broken
because using non-canonicalized paths exposed a bug in our path
normalization logic (Issue #12602). Once that is fixed, this should
work.
## Future plans
This PR needs some tests. Which test helpers should I use, and where
should I put those tests?
I noticed that unquoted paths are expanded within `eval_filepath()` and
`eval_directory()` before they even reach the `cd` command. This means
every paths is expanded twice. Is this intended?
Once this PR lands, the plan is to review all usages of the deprecated
APIs and migrate them to `EngineState::cwd()`. In the meantime, these
usages are annotated with `#[allow(deprecated)]` to avoid breaking CI.
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
- Plugin signatures are now saved to `plugin.msgpackz`, which is
brotli-compressed MessagePack.
- The file is updated incrementally, rather than writing all plugin
commands in the engine every time.
- The file always contains the result of the `Signature` call to the
plugin, even if commands were removed.
- Invalid data for a particular plugin just causes an error to be
reported, but the rest of the plugins can still be parsed
# User-Facing Changes
- The plugin file has a different filename, and it's not a nushell
script.
- The default `plugin.nu` file will be automatically migrated the first
time, but not other plugin config files.
- We don't currently provide any utilities that could help edit this
file, beyond `plugin add` and `plugin rm`
- `from msgpackz`, `to msgpackz` could also help
- New commands: `plugin add`, `plugin rm`
# Tests + Formatting
Tests added for the format and for the invalid handling.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] Check for documentation changes
- [ ] Definitely needs release notes
# Description
EngineState now tracks the script currently running, instead of the
parent directory of the script. This also provides an easy way to expose
the current running script to the user (Issue #12195).
Similarly, StateWorkingSet now tracks scripts instead of directories.
`parsed_module_files` and `currently_parsed_pwd` are merged into one
variable, `scripts`, which acts like a stack for tracking the current
running script (which is on the top of the stack).
Circular import check is added for `source` operations, in addition to
module import. A simple testcase is added for circular source.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
It shouldn't have any user facing changes.
# Description
When implementing a `Command`, one must also import all the types
present in the function signatures for `Command`. This makes it so that
we often import the same set of types in each command implementation
file. E.g., something like this:
```rust
use nu_protocol::ast::Call;
use nu_protocol::engine::{Command, EngineState, Stack};
use nu_protocol::{
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, PipelineData,
ShellError, Signature, Span, Type, Value,
};
```
This PR adds the `nu_engine::command_prelude` module which contains the
necessary and commonly used types to implement a `Command`:
```rust
// command_prelude.rs
pub use crate::CallExt;
pub use nu_protocol::{
ast::{Call, CellPath},
engine::{Command, EngineState, Stack},
record, Category, Example, IntoInterruptiblePipelineData, IntoPipelineData, IntoSpanned,
PipelineData, Record, ShellError, Signature, Span, Spanned, SyntaxShape, Type, Value,
};
```
This should reduce the boilerplate needed to implement a command and
also gives us a place to track the breadth of the `Command` API. I tried
to be conservative with what went into the prelude modules, since it
might be hard/annoying to remove items from the prelude in the future.
Let me know if something should be included or excluded.
# Description
The PR overhauls how IO redirection is handled, allowing more explicit
and fine-grain control over `stdout` and `stderr` output as well as more
efficient IO and piping.
To summarize the changes in this PR:
- Added a new `IoStream` type to indicate the intended destination for a
pipeline element's `stdout` and `stderr`.
- The `stdout` and `stderr` `IoStream`s are stored in the `Stack` and to
avoid adding 6 additional arguments to every eval function and
`Command::run`. The `stdout` and `stderr` streams can be temporarily
overwritten through functions on `Stack` and these functions will return
a guard that restores the original `stdout` and `stderr` when dropped.
- In the AST, redirections are now directly part of a `PipelineElement`
as a `Option<Redirection>` field instead of having multiple different
`PipelineElement` enum variants for each kind of redirection. This
required changes to the parser, mainly in `lite_parser.rs`.
- `Command`s can also set a `IoStream` override/redirection which will
apply to the previous command in the pipeline. This is used, for
example, in `ignore` to allow the previous external command to have its
stdout redirected to `Stdio::null()` at spawn time. In contrast, the
current implementation has to create an os pipe and manually consume the
output on nushell's side. File and pipe redirections (`o>`, `e>`, `e>|`,
etc.) have precedence over overrides from commands.
This PR improves piping and IO speed, partially addressing #10763. Using
the `throughput` command from that issue, this PR gives the following
speedup on my setup for the commands below:
| Command | Before (MB/s) | After (MB/s) | Bash (MB/s) |
| --------------------------- | -------------:| ------------:|
-----------:|
| `throughput o> /dev/null` | 1169 | 52938 | 54305 |
| `throughput \| ignore` | 840 | 55438 | N/A |
| `throughput \| null` | Error | 53617 | N/A |
| `throughput \| rg 'x'` | 1165 | 3049 | 3736 |
| `(throughput) \| rg 'x'` | 810 | 3085 | 3815 |
(Numbers above are the median samples for throughput)
This PR also paves the way to refactor our `ExternalStream` handling in
the various commands. For example, this PR already fixes the following
code:
```nushell
^sh -c 'echo -n "hello "; sleep 0; echo "world"' | find "hello world"
```
This returns an empty list on 0.90.1 and returns a highlighted "hello
world" on this PR.
Since the `stdout` and `stderr` `IoStream`s are available to commands
when they are run, then this unlocks the potential for more convenient
behavior. E.g., the `find` command can disable its ansi highlighting if
it detects that the output `IoStream` is not the terminal. Knowing the
output streams will also allow background job output to be redirected
more easily and efficiently.
# User-Facing Changes
- External commands returned from closures will be collected (in most
cases):
```nushell
1..2 | each {|_| nu -c "print a" }
```
This gives `["a", "a"]` on this PR, whereas this used to print "a\na\n"
and then return an empty list.
```nushell
1..2 | each {|_| nu -c "print -e a" }
```
This gives `["", ""]` and prints "a\na\n" to stderr, whereas this used
to return an empty list and print "a\na\n" to stderr.
- Trailing new lines are always trimmed for external commands when
piping into internal commands or collecting it as a value. (Failure to
decode the output as utf-8 will keep the trailing newline for the last
binary value.) In the current nushell version, the following three code
snippets differ only in parenthesis placement, but they all also have
different outputs:
1. `1..2 | each { ^echo a }`
```
a
a
╭────────────╮
│ empty list │
╰────────────╯
```
2. `1..2 | each { (^echo a) }`
```
╭───┬───╮
│ 0 │ a │
│ 1 │ a │
╰───┴───╯
```
3. `1..2 | (each { ^echo a })`
```
╭───┬───╮
│ 0 │ a │
│ │ │
│ 1 │ a │
│ │ │
╰───┴───╯
```
But in this PR, the above snippets will all have the same output:
```
╭───┬───╮
│ 0 │ a │
│ 1 │ a │
╰───┴───╯
```
- All existing flags on `run-external` are now deprecated.
- File redirections now apply to all commands inside a code block:
```nushell
(nu -c "print -e a"; nu -c "print -e b") e> test.out
```
This gives "a\nb\n" in `test.out` and prints nothing. The same result
would happen when printing to stdout and using a `o>` file redirection.
- External command output will (almost) never be ignored, and ignoring
output must be explicit now:
```nushell
(^echo a; ^echo b)
```
This prints "a\nb\n", whereas this used to print only "b\n". This only
applies to external commands; values and internal commands not in return
position will not print anything (e.g., `(echo a; echo b)` still only
prints "b").
- `complete` now always captures stderr (`do` is not necessary).
# After Submitting
The language guide and other documentation will need to be updated.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Because `std::fs::canonicalize` requires the path to exist, this PR
makes it so that when canonicalizing any config file, the
`$nu.default-config-dir/nushell` part is canonicalized first, then
`$nu.default-config-dir/nushell/foo.nu` is canonicalized.
This should also fix the issue @devyn pointed out
[here](https://github.com/nushell/nushell/pull/12118#issuecomment-1989546708)
where a couple of the tests failed if one's `~/.config/nushell` folder
was actually a symlink to a different folder. The tests previously
didn't canonicalize the expected paths.
I was going to make a PR that caches the config directory on startup (as
suggested by fdncred and Ian in Discord), but I can make that part of
this PR if we want to avoid creating unnecessary PRs. I think it
probably makes more sense to separate them though.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a new evaluator path with callbacks to a mutable trait
object implementing a Debugger trait. The trait object can do anything,
e.g., profiling, code coverage, step debugging. Currently,
entering/leaving a block and a pipeline element is marked with
callbacks, but more callbacks can be added as necessary. Not all
callbacks need to be used by all debuggers; unused ones are simply empty
calls. A simple profiler is implemented as a proof of concept.
The debugging support is implementing by making `eval_xxx()` functions
generic depending on whether we're debugging or not. This has zero
computational overhead, but makes the binary slightly larger (see
benchmarks below). `eval_xxx()` variants called from commands (like
`eval_block_with_early_return()` in `each`) are chosen with a dynamic
dispatch for two reasons: to not grow the binary size due to duplicating
the code of many commands, and for the fact that it isn't possible
because it would make Command trait objects object-unsafe.
In the future, I hope it will be possible to allow plugin callbacks such
that users would be able to implement their profiler plugins instead of
having to recompile Nushell.
[DAP](https://microsoft.github.io/debug-adapter-protocol/) would also be
interesting to explore.
Try `help debug profile`.
## Screenshots
Basic output:
To profile with more granularity, increase the profiler depth (you'll
see that repeated `is-windows` calls take a large chunk of total time,
making it a good candidate for optimizing):
## Benchmarks
### Binary size
Binary size increase vs. main: **+40360 bytes**. _(Both built with
`--release --features=extra,dataframe`.)_
### Time
```nushell
# bench_debug.nu
use std bench
let test = {
1..100
| each {
ls | each {|row| $row.name | str length }
}
| flatten
| math avg
}
print 'debug:'
let res2 = bench { debug profile $test } --pretty
print $res2
```
```nushell
# bench_nodebug.nu
use std bench
let test = {
1..100
| each {
ls | each {|row| $row.name | str length }
}
| flatten
| math avg
}
print 'no debug:'
let res1 = bench { do $test } --pretty
print $res1
```
`cargo run --release -- bench_debug.nu` is consistently 1--2 ms slower
than `cargo run --release -- bench_nodebug.nu` due to the collection
overhead + gathering the report. This is expected. When gathering more
stuff, the overhead is obviously higher.
`cargo run --release -- bench_nodebug.nu` vs. `nu bench_nodebug.nu` I
didn't measure any difference. Both benchmarks report times between 97
and 103 ms randomly, without one being consistently higher than the
other. This suggests that at least in this particular case, when not
running any debugger, there is no runtime overhead.
## API changes
This PR adds a generic parameter to all `eval_xxx` functions that forces
you to specify whether you use the debugger. You can resolve it in two
ways:
* Use a provided helper that will figure it out for you. If you wanted
to use `eval_block(&engine_state, ...)`, call `let eval_block =
get_eval_block(&engine_state); eval_block(&engine_state, ...)`
* If you know you're in an evaluation path that doesn't need debugger
support, call `eval_block::<WithoutDebug>(&engine_state, ...)` (this is
the case of hooks, for example).
I tried to add more explanation in the docstring of `debugger_trait.rs`.
## TODO
- [x] Better profiler output to reduce spam of iterative commands like
`each`
- [x] Resolve `TODO: DEBUG` comments
- [x] Resolve unwraps
- [x] Add doc comments
- [x] Add usage and extra usage for `debug profile`, explaining all
columns
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Hopefully none.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes sure `$nu.default-config-dir` and `$nu.plugin-path` are
canonicalized.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`$nu.default-config-dir` (and `$nu.plugin-path`) will now give canonical
paths, with symlinks and whatnot resolved.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I've added a couple of tests to check that even if the config folder
and/or any of the config files within are symlinks, the `$nu.*`
variables are properly canonicalized. These tests unfortunately only run
on Linux and MacOS, because I couldn't figure out how to change the
config directory on Windows. Also, given that they involve creating
files, I'm not sure if they're excessive, so I could remove one or two
of them.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, there's multiple places that look for a config directory, and
each of them has different error messages when it can't be found. This
PR makes a `ConfigDirNotFound` error to standardize the error message
for all of these cases.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Previously, the errors in `create_nu_constant()` would say which config
file Nushell was trying to get when it couldn't find the config
directory. Now it doesn't. However, I think that's fine, given that it
doesn't matter whether it couldn't find the config directory while
looking for `login.nu` or `env.nu`, it only matters that it couldn't
find it.
This is what the error looks like:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
This pr is a follow up to
[#11569](https://github.com/nushell/nushell/pull/11569#issuecomment-1902279587)
> Revert the logic in https://github.com/nushell/nushell/pull/10694 and
apply the logic in this pr to mv, cp, rv will require a larger change, I
need to think how to achieve the bahavior
And sorry @bobhy for reverting some of your changes.
This pr is going to unify glob behavior on the given commands:
* open
* rm
* cp-old
* mv
* umv
* cp
* du
So they have the same behavior to `ls`, which is:
If given parameter is quoted by single quote(`'`) or double quote(`"`),
don't auto-expand the glob pattern. If not quoted, auto-expand the glob
pattern.
Fixes: #9558Fixes: #10211Fixes: #9310Fixes: #10364
# TODO
But there is one thing remains: if we give a variable to the command, it
will always auto-expand the glob pattern, e.g:
```nushell
let path = "a[123]b"
rm $path
```
I don't think it's expected. But I also think user might want to
auto-expand the glob pattern in variables.
So I'll introduce a new command called `glob escape`, then if user
doesn't want to auto-expand the glob pattern, he can just do this: `rm
($path | glob escape)`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
Done
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
## NOTE
This pr changes the semantic of `GlobPattern`, before this pr, it will
`expand path` after evaluated, this makes `nu_engine::glob_from` have no
chance to glob things right if a path contains glob pattern.
e.g: [#9310
](https://github.com/nushell/nushell/issues/9310#issuecomment-1886824030)
#10211
I think changing the semantic is fine, because it makes glob works if
path contains something like '*'.
It maybe a breaking change if a custom command's argument are annotated
by `: glob`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Closes#11561
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR will allow string interpolation at parse time.
Since the actual config hasn't been loaded at parse time, this uses the
`get_config()` method on `StateWorkingSet`. So file sizes and datetimes
(I think those are the only things whose string representations depend
on the config) may be formatted differently from how users have
configured things, which may come as a surprise to some. It does seem
unlikely that anyone would be formatting file sizes or date times at
parse time. Still, something to think about if/before this PR merged.
Also, I changed the `ModuleNotFound` error to include the name of the
module.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users will be able to do stuff like:
```nu
const x = [1 2 3]
const y = $"foo($x)" // foo[1, 2, 3]
```
The main use case is `use`-ing and `source`-ing files at parse time:
```nu
const file = "foo.nu"
use $"($file)"
```
If the module isn't found, you'll see an error like this:
```
Error: nu::parser::module_not_found
× Module not found.
╭─[entry #3:1:1]
1 │ use $"($file)"
· ─────┬────
· ╰── module foo.nu not found
╰────
help: module files and their paths must be available before your script is run as parsing occurs before anything is evaluated
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Although there's user-facing changes, there's probably no need to change
the docs since people probably already expect string interpolation to
work at parse time.
Edit: @kubouch pointed out that we'd need to document the fact that
stuff like file sizes and datetimes won't get formatted according to
user's runtime configs, so I'll make a PR to nushell.github.io after
this one
# Description
Fixes: #11455
### For arguments which is annotated with `:path/:directory/:glob`
To fix the issue, we need to have a way to know if a path is originally
quoted during runtime. So the information needed to be added at several
levels:
* parse time (from user input to expression)
We need to add quoted information into `Expr::Filepath`,
`Expr::Directory`, `Expr::GlobPattern`
* eval time
When convert from `Expr::Filepath`, `Expr::Directory`,
`Expr::GlobPattern` to `Value::String` during runtime, we won't auto
expanded the path if it's quoted
### For `ls`
It's really special, because it accepts a `String` as a pattern, and it
generates `glob` expression inside the command itself.
So the idea behind the change is introducing a special SyntaxShape to
ls: `SyntaxShape::LsGlobPattern`. So we can track if the pattern is
originally quoted easier, and we don't auto expand the path either.
Then when constructing a glob pattern inside ls, we check if input
pattern is quoted, if so: we escape the input pattern, so we can run `ls
a[123]b`, because it's already escaped.
Finally, to accomplish the checking process, we also need to introduce a
new value type called `Value::QuotedString` to differ from
`Value::String`, it's used to generate an enum called `NuPath`, which is
finally used in `ls` function. `ls` learned from `NuPath` to know if
user input is quoted.
# User-Facing Changes
Actually it contains several changes
### For arguments which is annotated with `:path/:directory/:glob`
#### Before
```nushell
> def foo [p: path] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
> def foo [p: directory] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
> def foo [p: glob] { echo $p }; print (foo "~/a"); print (foo '~/a')
/home/windsoilder/a
/home/windsoilder/a
```
#### After
```nushell
> def foo [p: path] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
> def foo [p: directory] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
> def foo [p: glob] { echo $p }; print (foo "~/a"); print (foo '~/a')
~/a
~/a
```
### For ls command
`touch '[uwu]'`
#### Before
```
❯ ls -D "[uwu]"
Error: × No matches found for [uwu]
╭─[entry #6:1:1]
1 │ ls -D "[uwu]"
· ───┬───
· ╰── Pattern, file or folder not found
╰────
help: no matches found
```
#### After
```
❯ ls -D "[uwu]"
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ [uwu] │ file │ 0 B │ now │
╰───┴───────┴──────┴──────┴──────────╯
```
# Tests + Formatting
Done
# After Submitting
NaN
# Description
Adds a CLI flag for nushell that disables reading and writing to the
history file. This will be useful for future testing and possibly our
users as well. To borrow `fish` shell's terminology, this allows users
to start nushell in "private" mode.
# User-Facing Changes
Breaking API change for `nu-protocol` (changed `Config`).
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Finishes implementing https://github.com/nushell/nushell/issues/10598,
which asks for a spread operator in lists, in records, and when calling
commands.
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR will allow spreading arguments to commands (both internal and
external). It will also deprecate spreading arguments automatically when
passing to external commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Users will be able to use `...` to spread arguments to custom/builtin
commands that have rest parameters or allow unknown arguments, or to any
external command
- If a custom command doesn't have a rest parameter and it doesn't allow
unknown arguments either, the spread operator will not be allowed
- Passing lists to external commands without `...` will work for now but
will cause a deprecation warning saying that it'll stop working in 0.91
(is 2 versions enough time?)
Here's a function to help with demonstrating some behavior:
```nushell
> def foo [ a, b, c?, d?, ...rest ] { [$a $b $c $d $rest] | to nuon }
```
You can pass a list of arguments to fill in the `rest` parameter using
`...`:
```nushell
> foo 1 2 3 4 ...[5 6]
[1, 2, 3, 4, [5, 6]]
```
If you don't use `...`, the list `[5 6]` will be treated as a single
argument:
```nushell
> foo 1 2 3 4 [5 6] # Note the double [[]]
[1, 2, 3, 4, [[5, 6]]]
```
You can omit optional parameters before the spread arguments:
```nushell
> foo 1 2 3 ...[4 5] # d is omitted here
[1, 2, 3, null, [4, 5]]
```
If you have multiple lists, you can spread them all:
```nushell
> foo 1 2 3 ...[4 5] 6 7 ...[8] ...[]
[1, 2, 3, null, [4, 5, 6, 7, 8]]
```
Here's the kind of error you get when you try to spread arguments to a
command with no rest parameter:
And this is the warning you get when you pass a list to an external now
(without `...`):
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added tests to cover the following cases:
- Spreading arguments to a command that doesn't have a rest parameter
(unexpected spread argument error)
- Spreading arguments to a command that doesn't have a rest parameter
*but* there's also a missing positional argument (missing positional
error)
- Spreading arguments to a command that doesn't have a rest parameter
but does allow unknown arguments, such as `exec` (allowed)
- Spreading a list literal containing arguments of the wrong type (parse
error)
- Spreading a non-list value, both to internal and external commands
- Having named arguments in the middle of rest arguments
- `explain`ing a command call that spreads its arguments
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Examples
Suppose you have multiple tables:
```nushell
let people = [[id name age]; [0 alice 100] [1 bob 200] [2 eve 300]]
let evil_twins = [[id name age]; [0 ecila 100] [-1 bob 200] [-2 eve 300]]
```
Maybe you often find yourself needing to merge multiple tables and want
a utility to do that. You could write a function like this:
```nushell
def merge_all [ ...tables ] { $tables | reduce { |it, acc| $acc | merge $it } }
```
Then you can use it like this:
```nushell
> merge_all ...([$people $evil_twins] | each { |$it| $it | select name age })
╭───┬───────┬─────╮
│ # │ name │ age │
├───┼───────┼─────┤
│ 0 │ ecila │ 100 │
│ 1 │ bob │ 200 │
│ 2 │ eve │ 300 │
╰───┴───────┴─────╯
```
Except they had duplicate columns, so now you first want to suffix every
column with a number to tell you which table the column came from. You
can make a command for that:
```nushell
def select_and_merge [ --cols: list<string>, ...tables ] {
let renamed_tables = $tables
| enumerate
| each { |it|
$it.item | select $cols | rename ...($cols | each { |col| $col + ($it.index | into string) })
};
merge_all ...$renamed_tables
}
```
And call it like this:
```nushell
> select_and_merge --cols [name age] $people $evil_twins
╭───┬───────┬──────┬───────┬──────╮
│ # │ name0 │ age0 │ name1 │ age1 │
├───┼───────┼──────┼───────┼──────┤
│ 0 │ alice │ 100 │ ecila │ 100 │
│ 1 │ bob │ 200 │ bob │ 200 │
│ 2 │ eve │ 300 │ eve │ 300 │
╰───┴───────┴──────┴───────┴──────╯
```
---
Suppose someone's made a command to search for APT packages:
```nushell
# The main command
def search-pkgs [
--install # Whether to install any packages it finds
log_level: int # Pretend it's a good idea to make this a required positional parameter
exclude?: list<string> # Packages to exclude
repositories?: list<string> # Which repositories to look in (searches in all if not given)
...pkgs # Package names to search for
] {
{ install: $install, log_level: $log_level, exclude: ($exclude | to nuon), repositories: ($repositories | to nuon), pkgs: ($pkgs | to nuon) }
}
```
It has a lot of parameters to configure it, so you might make your own
helper commands to wrap around it for specific cases. Here's one
example:
```nushell
# Only look for packages locally
def search-pkgs-local [
--install # Whether to install any packages it finds
log_level: int
exclude?: list<string> # Packages to exclude
...pkgs # Package names to search for
] {
# All required and optional positional parameters are given
search-pkgs --install=$install $log_level [] ["<local URI or something>"] ...$pkgs
}
```
And you can run it like this:
```nushell
> search-pkgs-local --install=false 5 ...["python2.7" "vim"]
╭──────────────┬──────────────────────────────╮
│ install │ false │
│ log_level │ 5 │
│ exclude │ [] │
│ repositories │ ["<local URI or something>"] │
│ pkgs │ ["python2.7", vim] │
╰──────────────┴──────────────────────────────╯
```
One thing I realized when writing this was that if we decide to not
allow passing optional arguments using the spread operator, then you can
(mis?)use the spread operator to skip optional parameters. Here, I
didn't want to give `exclude` explicitly, so I used a spread operator to
pass the packages to install. Without it, I would've needed to do
`search-pkgs-local --install=false 5 [] "python2.7" "vim"` (explicitly
pass `[]` (or `null`, in the general case) to `exclude`). There are
probably more idiomatic ways to do this, but I just thought it was
something interesting.
If you're a virologist of the [xkcd](https://xkcd.com/350/) kind,
another helper command you might make is this:
```nushell
# Install any packages it finds
def live-dangerously [ ...pkgs ] {
# One optional argument was given (exclude), while another was not (repositories)
search-pkgs 0 [] ...$pkgs --install # Flags can go after spread arguments
}
```
Running it:
```nushell
> live-dangerously "git" "*vi*" # *vi* because I don't feel like typing out vim and neovim
╭──────────────┬─────────────╮
│ install │ true │
│ log_level │ 0 │
│ exclude │ [] │
│ repositories │ null │
│ pkgs │ [git, *vi*] │
╰──────────────┴─────────────╯
```
Here's an example that uses the spread operator more than once within
the same command call:
```nushell
let extras = [ chrome firefox python java git ]
def search-pkgs-curated [ ...pkgs ] {
(search-pkgs
1
[emacs]
["example.com", "foo.com"]
vim # A must for everyone!
...($pkgs | filter { |p| not ($p | str contains "*") }) # Remove packages with globs
python # Good tool to have
...$extras
--install=false
python3) # I forget, did I already put Python in extras?
}
```
Running it:
```nushell
> search-pkgs-curated "git" "*vi*"
╭──────────────┬───────────────────────────────────────────────────────────────────╮
│ install │ false │
│ log_level │ 1 │
│ exclude │ [emacs] │
│ repositories │ [example.com, foo.com] │
│ pkgs │ [vim, git, python, chrome, firefox, python, java, git, "python3"] │
╰──────────────┴───────────────────────────────────────────────────────────────────╯
```
Goes towards implementing #10598, which asks for a spread operator in
lists, in records, and when calling commands (continuation of #11006,
which only implements it in lists)
# Description
This PR is for adding a spread operator that can be used when building
records. Additional functionality can be added later.
Changes:
- Previously, the `Expr::Record` variant held `(Expression, Expression)`
pairs. It now holds instances of an enum `RecordItem` (the name isn't
amazing) that allows either a key-value mapping or a spread operator.
- `...` will be treated as the spread operator when it appears before
`$`, `{`, or `(` inside records (no whitespace allowed in between) (not
implemented yet)
- The error message for duplicate columns now includes the column name
itself, because if two spread records are involved in such an error, you
can't tell which field was duplicated from the spans alone
`...` will still be treated as a normal string outside records, and even
in records, it is not treated as a spread operator when not followed
immediately by a `$`, `{`, or `(`.
# User-Facing Changes
Users will be able to use `...` when building records.
```
> let rec = { x: 1, ...{ a: 2 } }
> $rec
╭───┬───╮
│ x │ 1 │
│ a │ 2 │
╰───┴───╯
> { foo: bar, ...$rec, baz: blah }
╭─────┬──────╮
│ foo │ bar │
│ x │ 1 │
│ a │ 2 │
│ baz │ blah │
╰─────┴──────╯
```
If you want to update a field of a record, you'll have to use `merge`
instead:
```
> { ...$rec, x: 5 }
Error: nu:🐚:column_defined_twice
× Record field or table column used twice: x
╭─[entry #2:1:1]
1 │ { ...$rec, x: 5 }
· ──┬─ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
> $rec | merge { x: 5 }
╭───┬───╮
│ x │ 5 │
│ a │ 2 │
╰───┴───╯
```
# Tests + Formatting
# After Submitting
# Description
Convert these ShellError variants to named fields:
* CreateNotPossible
* MoveNotPossibleSingle
* DirectoryNotFoundCustom
* DirectoryNotFound
* NotADirectory
* OutOfMemoryError
* PermissionDeniedError
* IOErrorSpanned
* IOError
* IOInterrupted
Also place the `span` field of `DirectoryNotFound` last to match other
errors.
Part of #10700 (almost half done!)
# User-Facing Changes
None
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Consequences of #10841
This does not yet make the assumption that columns are always
duplicated. Follow the existing logic here
- Use saner record API in `nu-engine/src/eval.rs`
- Use checked record construction in `nu-engine/src/scope.rs`
- Use `values` iterator in `nu-engine/src/scope.rs`
- Use `columns` iterator in `nu_engine::get_columns()`
- Start using record API in `value/mod.rs`
- Use `.insert` in `eval_const.rs` Record code
- Record API for `eval_const.rs` table code
# User-Facing Changes
None
# Tests + Formatting
None
# Description
Pretty much all operations/commands in Nushell assume that the column
names/keys in a record and thus also in a table (which consists of a
list of records) are unique.
Access through a string-like cell path should refer to a single column
or key/value pair and our output through `table` will only show the last
mention of a repeated column name.
```nu
[[a a]; [1 2]]
╭─#─┬─a─╮
│ 0 │ 2 │
╰───┴───╯
```
While the record parsing already either errors with the
`ShellError::ColumnDefinedTwice` or silently overwrites the first
occurence with the second occurence, the table literal syntax `[[header
columns]; [val1 val2]]` currently still allowed the creation of tables
(and internally records with more than one entry with the same name.
This is not only confusing, but also breaks some assumptions around how
we can efficiently perform operations or in the past lead to outright
bugs (e.g. #8431 fixed by #8446).
This PR proposes to make this an error.
After this change another hole which allowed the construction of records
with non-unique column names will be plugged.
## Parts
- Fix `SE::ColumnDefinedTwice` error code
- Remove previous tests permitting duplicate columns
- Deny duplicate column in table literal eval
- Deny duplicate column in const eval
- Deny duplicate column in `from nuon`
# User-Facing Changes
`[[a a]; [1 2]]` will now return an error:
```
Error: nu:🐚:column_defined_twice
× Record field or table column used twice
╭─[entry #2:1:1]
1 │ [[a a]; [1 2]]
· ┬ ┬
· │ ╰── field redefined here
· ╰── field first defined here
╰────
```
this may under rare circumstances block code from evaluating.
Furthermore this makes some NUON files invalid if they previously
contained tables with repeated column names.
# Tests + Formatting
Added tests for each of the different evaluation paths that materialize
tables.
# Description
Currently we support "multiplication" of strings, resulting in a terse
way to repeat a particular string.
This can have unintended side effects when dealing with mixed data (e.g.
after parsing data that is not all numbers).
Furthermore as we frequently fall-back to strings while parsing source
code, this introduced a runaway edge case in const evaluation (#10212)
Work for #10233
## Details
- Remove python-like string multiplication.
- Workaround for indentation
- This should probably be addressed with a purpose built command
- Remove special const-eval error test
# User-Facing Changes
**Major breaking change!**
`"string" * 42` will stop working. (This was used for example in the
stdlib)
We should bless a good alternative before landing this
---------
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
# Description
This generally makes for nicer APIs, as you are not forced to use an
existing allocation covering the full `String`.
Some exceptions remain where the underlying type requirements favor it.
# User-Facing Changes
None
# Description
This PR adds the ability to have a `$nu.plugin-path` even when you
plugins are registered and it also should work with `nu -n --no-stdlib`.
### Before
It would give an error
```
│ plugin-path │ IOError("Could not get plugin signature location") │
```
### After
It returns the proper path, like this for me
```
│ plugin-path │ /Users/fdncred/Library/Application Support/nushell/plugin.nu │
```
Closed#10198
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
As part of the refactor to split spans off of Value, this moves to using
helper functions to create values, and using `.span()` instead of
matching span out of Value directly.
Hoping to get a few more helping hands to finish this, as there are a
lot of commands to update :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Co-authored-by: WindSoilder <windsoilder@outlook.com>
