#include <Limelight.h>
#include <SDL.h>
#include "streaming/session.h"
#include "settings/mappingmanager.h"
#include "path.h"

#include <QtGlobal>
#include <QtMath>
#include <QDir>

#define VK_0 0x30
#define VK_A 0x41

// These are real Windows VK_* codes
#ifndef VK_F1
#define VK_F1 0x70
#define VK_F13 0x7C
#define VK_NUMPAD0 0x60
#endif

#define MOUSE_POLLING_INTERVAL 5

// How long the mouse button will be pressed for a tap to click gesture
#define TAP_BUTTON_RELEASE_DELAY 100

// How long the fingers must be stationary to start a drag
#define DRAG_ACTIVATION_DELAY 650

// How far the finger can move before it cancels a drag or tap
#define DEAD_ZONE_DELTA 0.1f

// How long the Start button must be pressed to toggle mouse emulation
#define MOUSE_EMULATION_LONG_PRESS_TIME 750

// How long between polling the gamepad to send virtual mouse input
#define MOUSE_EMULATION_POLLING_INTERVAL 50

// Determines how fast the mouse will move each interval
#define MOUSE_EMULATION_MOTION_MULTIPLIER 4

// Determines the maximum motion amount before allowing movement
#define MOUSE_EMULATION_DEADZONE 2

// Haptic capabilities (in addition to those from SDL_HapticQuery())
#define ML_HAPTIC_GC_RUMBLE      (1U << 16)
#define ML_HAPTIC_SIMPLE_RUMBLE  (1U << 17)

const int SdlInputHandler::k_ButtonMap[] = {
    A_FLAG, B_FLAG, X_FLAG, Y_FLAG,
    BACK_FLAG, SPECIAL_FLAG, PLAY_FLAG,
    LS_CLK_FLAG, RS_CLK_FLAG,
    LB_FLAG, RB_FLAG,
    UP_FLAG, DOWN_FLAG, LEFT_FLAG, RIGHT_FLAG
};

SdlInputHandler::SdlInputHandler(StreamingPreferences& prefs, NvComputer*, int streamWidth, int streamHeight)
    : m_MultiController(prefs.multiController),
      m_GamepadMouse(prefs.gamepadMouse),
      m_MouseMoveTimer(0),
      m_FakeCaptureActive(false),
      m_LeftButtonReleaseTimer(0),
      m_RightButtonReleaseTimer(0),
      m_DragTimer(0),
      m_DragButton(0),
      m_NumFingersDown(0),
      m_StreamWidth(streamWidth),
      m_StreamHeight(streamHeight)
{
    // Allow gamepad input when the app doesn't have focus
    SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "1");

    // If mouse acceleration is enabled, use relative mode warp (which
    // is via normal motion events that are influenced by mouse acceleration).
    // Otherwise, we'll use raw input capture which is straight from the device
    // without modification by the OS.
    SDL_SetHintWithPriority(SDL_HINT_MOUSE_RELATIVE_MODE_WARP,
                            prefs.mouseAcceleration ? "1" : "0",
                            SDL_HINT_OVERRIDE);

#if defined(Q_OS_DARWIN) && !SDL_VERSION_ATLEAST(2, 0, 10)
    // SDL 2.0.9 on macOS has a broken HIDAPI mapping for the older Xbox One S
    // firmware, so we have to disable HIDAPI for Xbox gamepads on macOS until
    // SDL 2.0.10 where the bug is fixed.
    // https://github.com/moonlight-stream/moonlight-qt/issues/133
    // https://bugzilla.libsdl.org/show_bug.cgi?id=4395
    SDL_SetHint(SDL_HINT_JOYSTICK_HIDAPI_XBOX, "0");
#endif

    // We must initialize joystick explicitly before gamecontroller in order
    // to ensure we receive gamecontroller attach events for gamepads where
    // SDL doesn't have a built-in mapping. By starting joystick first, we
    // can allow mapping manager to update the mappings before GC attach
    // events are generated.
    SDL_assert(!SDL_WasInit(SDL_INIT_JOYSTICK));
    if (SDL_InitSubSystem(SDL_INIT_JOYSTICK) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_JOYSTICK) failed: %s",
                     SDL_GetError());
    }

    MappingManager mappingManager;
    mappingManager.applyMappings();

    // Flush gamepad arrival and departure events which may be queued before
    // starting the gamecontroller subsystem again. This prevents us from
    // receiving duplicate arrival and departure events for the same gamepad.
    SDL_FlushEvent(SDL_CONTROLLERDEVICEADDED);
    SDL_FlushEvent(SDL_CONTROLLERDEVICEREMOVED);

    // We need to reinit this each time, since you only get
    // an initial set of gamepad arrival events once per init.
    SDL_assert(!SDL_WasInit(SDL_INIT_GAMECONTROLLER));
    if (SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) failed: %s",
                     SDL_GetError());
    }

#if !SDL_VERSION_ATLEAST(2, 0, 9)
    SDL_assert(!SDL_WasInit(SDL_INIT_HAPTIC));
    if (SDL_InitSubSystem(SDL_INIT_HAPTIC) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_HAPTIC) failed: %s",
                     SDL_GetError());
    }
#endif

    // Initialize the gamepad mask with currently attached gamepads to avoid
    // causing gamepads to unexpectedly disappear and reappear on the host
    // during stream startup as we detect currently attached gamepads one at a time.
    m_GamepadMask = getAttachedGamepadMask();

    SDL_zero(m_GamepadState);
    SDL_zero(m_TouchDownEvent);
    SDL_zero(m_CumulativeDelta);

    SDL_AtomicSet(&m_MouseDeltaX, 0);
    SDL_AtomicSet(&m_MouseDeltaY, 0);

    Uint32 pollingInterval = QString(qgetenv("MOUSE_POLLING_INTERVAL")).toUInt();
    if (pollingInterval == 0) {
        pollingInterval = MOUSE_POLLING_INTERVAL;
    }
    else {
        SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                    "Using custom mouse polling interval: %u ms",
                    pollingInterval);
    }

    m_MouseMoveTimer = SDL_AddTimer(pollingInterval, SdlInputHandler::mouseMoveTimerCallback, this);
}

SdlInputHandler::~SdlInputHandler()
{
    for (int i = 0; i < MAX_GAMEPADS; i++) {
        if (m_GamepadState[i].mouseEmulationTimer != 0) {
            Session::get()->notifyMouseEmulationMode(false);
            SDL_RemoveTimer(m_GamepadState[i].mouseEmulationTimer);
        }
#if !SDL_VERSION_ATLEAST(2, 0, 9)
        if (m_GamepadState[i].haptic != nullptr) {
            SDL_HapticClose(m_GamepadState[i].haptic);
        }
#endif
        if (m_GamepadState[i].controller != nullptr) {
            SDL_GameControllerClose(m_GamepadState[i].controller);
        }
    }

    SDL_RemoveTimer(m_MouseMoveTimer);
    SDL_RemoveTimer(m_LeftButtonReleaseTimer);
    SDL_RemoveTimer(m_RightButtonReleaseTimer);
    SDL_RemoveTimer(m_DragTimer);

#if !SDL_VERSION_ATLEAST(2, 0, 9)
    SDL_QuitSubSystem(SDL_INIT_HAPTIC);
    SDL_assert(!SDL_WasInit(SDL_INIT_HAPTIC));
#endif

    SDL_QuitSubSystem(SDL_INIT_GAMECONTROLLER);
    SDL_assert(!SDL_WasInit(SDL_INIT_GAMECONTROLLER));

    SDL_QuitSubSystem(SDL_INIT_JOYSTICK);
    SDL_assert(!SDL_WasInit(SDL_INIT_JOYSTICK));

    // Return background event handling to off
    SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "0");

#ifdef STEAM_LINK
    // Hide SDL's cursor on Steam Link after quitting the stream.
    // FIXME: We should also do this for other situations where SDL
    // and Qt will draw their own mouse cursors like KMSDRM or RPi
    // video backends.
    SDL_ShowCursor(SDL_DISABLE);
#endif
}

void SdlInputHandler::handleKeyEvent(SDL_KeyboardEvent* event)
{
    short keyCode;
    char modifiers;

    // Check for our special key combos
    if ((event->state == SDL_PRESSED) &&
            (event->keysym.mod & KMOD_CTRL) &&
            (event->keysym.mod & KMOD_ALT) &&
            (event->keysym.mod & KMOD_SHIFT)) {
        // First we test the SDLK combos for matches,
        // that way we ensure that latin keyboard users
        // can match to the key they see on their keyboards.
        // If nothing matches that, we'll then go on to
        // checking scancodes so non-latin keyboard users
        // can have working hotkeys (though possibly in
        // odd positions). We must do all SDLK tests before
        // any scancode tests to avoid issues in cases
        // where the SDLK for one shortcut collides with
        // the scancode of another.

        // Check for quit combo (Ctrl+Alt+Shift+Q)
        if (event->keysym.sym == SDLK_q) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected quit key combo (SDLK)");

            // Push a quit event to the main loop
            SDL_Event event;
            event.type = SDL_QUIT;
            event.quit.timestamp = SDL_GetTicks();
            SDL_PushEvent(&event);
            return;
        }
        // Check for the unbind combo (Ctrl+Alt+Shift+Z)
        else if (event->keysym.sym == SDLK_z) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected mouse capture toggle combo (SDLK)");

            // Stop handling future input
            setCaptureActive(!isCaptureActive());

            // Force raise all keys to ensure they aren't stuck,
            // since we won't get their key up events.
            raiseAllKeys();
            return;
        }
        else if (event->keysym.sym == SDLK_x) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected full-screen toggle combo (SDLK)");
            Session::s_ActiveSession->toggleFullscreen();

            // Force raise all keys just be safe across this full-screen/windowed
            // transition just in case key events get lost.
            raiseAllKeys();
            return;
        }
        else if (event->keysym.sym == SDLK_s) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected stats toggle combo (SDLK)");

            // Toggle the stats overlay
            Session::get()->getOverlayManager().setOverlayState(Overlay::OverlayDebug,
                                                                !Session::get()->getOverlayManager().isOverlayEnabled(Overlay::OverlayDebug));

            // Force raise all keys just be safe across this full-screen/windowed
            // transition just in case key events get lost.
            raiseAllKeys();
            return;
        }
        // Check for quit combo (Ctrl+Alt+Shift+Q)
        else if (event->keysym.scancode == SDL_SCANCODE_Q) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected quit key combo (scancode)");

            // Push a quit event to the main loop
            SDL_Event event;
            event.type = SDL_QUIT;
            event.quit.timestamp = SDL_GetTicks();
            SDL_PushEvent(&event);
            return;
        }
        // Check for the unbind combo (Ctrl+Alt+Shift+Z)
        else if (event->keysym.scancode == SDL_SCANCODE_Z) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected mouse capture toggle combo (scancode)");

            // Stop handling future input
            setCaptureActive(!isCaptureActive());

            // Force raise all keys to ensure they aren't stuck,
            // since we won't get their key up events.
            raiseAllKeys();
            return;
        }
        // Check for the full-screen combo (Ctrl+Alt+Shift+X)
        else if (event->keysym.scancode == SDL_SCANCODE_X) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected full-screen toggle combo (scancode)");
            Session::s_ActiveSession->toggleFullscreen();

            // Force raise all keys just be safe across this full-screen/windowed
            // transition just in case key events get lost.
            raiseAllKeys();
            return;
        }
        else if (event->keysym.scancode == SDL_SCANCODE_S) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected stats toggle combo (scancode)");

            // Toggle the stats overlay
            Session::get()->getOverlayManager().setOverlayState(Overlay::OverlayDebug,
                                                                !Session::get()->getOverlayManager().isOverlayEnabled(Overlay::OverlayDebug));

            // Force raise all keys just be safe across this full-screen/windowed
            // transition just in case key events get lost.
            raiseAllKeys();
            return;
        }
    }

    if (!isCaptureActive()) {
        // Not capturing
        return;
    }

    // Set modifier flags
    modifiers = 0;
    if (event->keysym.mod & KMOD_CTRL) {
        modifiers |= MODIFIER_CTRL;
    }
    if (event->keysym.mod & KMOD_ALT) {
        modifiers |= MODIFIER_ALT;
    }
    if (event->keysym.mod & KMOD_SHIFT) {
        modifiers |= MODIFIER_SHIFT;
    }
    if (event->keysym.mod & KMOD_GUI) {
        modifiers |= MODIFIER_META;
    }

    // Set keycode. We explicitly use scancode here because GFE will try to correct
    // for AZERTY layouts on the host but it depends on receiving VK_ values matching
    // a QWERTY layout to work.
    if (event->keysym.scancode >= SDL_SCANCODE_1 && event->keysym.scancode <= SDL_SCANCODE_9) {
        // SDL defines SDL_SCANCODE_0 > SDL_SCANCODE_9, so we need to handle that manually
        keyCode = (event->keysym.scancode - SDL_SCANCODE_1) + VK_0 + 1;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_A && event->keysym.scancode <= SDL_SCANCODE_Z) {
        keyCode = (event->keysym.scancode - SDL_SCANCODE_A) + VK_A;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_F1 && event->keysym.scancode <= SDL_SCANCODE_F12) {
        keyCode = (event->keysym.scancode - SDL_SCANCODE_F1) + VK_F1;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_F13 && event->keysym.scancode <= SDL_SCANCODE_F24) {
        keyCode = (event->keysym.scancode - SDL_SCANCODE_F13) + VK_F13;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_KP_1 && event->keysym.scancode <= SDL_SCANCODE_KP_9) {
        // SDL defines SDL_SCANCODE_KP_0 > SDL_SCANCODE_KP_9, so we need to handle that manually
        keyCode = (event->keysym.scancode - SDL_SCANCODE_KP_1) + VK_NUMPAD0 + 1;
    }
    else {
        switch (event->keysym.scancode) {
            case SDL_SCANCODE_BACKSPACE:
                keyCode = 0x08;
                break;
            case SDL_SCANCODE_TAB:
                keyCode = 0x09;
                break;
            case SDL_SCANCODE_CLEAR:
                keyCode = 0x0C;
                break;
            case SDL_SCANCODE_KP_ENTER: // FIXME: Is this correct?
            case SDL_SCANCODE_RETURN:
                keyCode = 0x0D;
                break;
            case SDL_SCANCODE_PAUSE:
                keyCode = 0x13;
                break;
            case SDL_SCANCODE_CAPSLOCK:
                keyCode = 0x14;
                break;
            case SDL_SCANCODE_ESCAPE:
                keyCode = 0x1B;
                break;
            case SDL_SCANCODE_SPACE:
                keyCode = 0x20;
                break;
            case SDL_SCANCODE_PAGEUP:
                keyCode = 0x21;
                break;
            case SDL_SCANCODE_PAGEDOWN:
                keyCode = 0x22;
                break;
            case SDL_SCANCODE_END:
                keyCode = 0x23;
                break;
            case SDL_SCANCODE_HOME:
                keyCode = 0x24;
                break;
            case SDL_SCANCODE_LEFT:
                keyCode = 0x25;
                break;
            case SDL_SCANCODE_UP:
                keyCode = 0x26;
                break;
            case SDL_SCANCODE_RIGHT:
                keyCode = 0x27;
                break;
            case SDL_SCANCODE_DOWN:
                keyCode = 0x28;
                break;
            case SDL_SCANCODE_SELECT:
                keyCode = 0x29;
                break;
            case SDL_SCANCODE_EXECUTE:
                keyCode = 0x2B;
                break;
            case SDL_SCANCODE_PRINTSCREEN:
                keyCode = 0x2C;
                break;
            case SDL_SCANCODE_INSERT:
                keyCode = 0x2D;
                break;
            case SDL_SCANCODE_DELETE:
                keyCode = 0x2E;
                break;
            case SDL_SCANCODE_HELP:
                keyCode = 0x2F;
                break;
            case SDL_SCANCODE_KP_0:
                // See comment above about why we only handle SDL_SCANCODE_KP_0 here
                keyCode = VK_NUMPAD0;
                break;
            case SDL_SCANCODE_0:
                // See comment above about why we only handle SDL_SCANCODE_0 here
                keyCode = VK_0;
                break;
            case SDL_SCANCODE_KP_MULTIPLY:
                keyCode = 0x6A;
                break;
            case SDL_SCANCODE_KP_PLUS:
                keyCode = 0x6B;
                break;
            case SDL_SCANCODE_KP_COMMA:
                keyCode = 0x6C;
                break;
            case SDL_SCANCODE_KP_MINUS:
                keyCode = 0x6D;
                break;
            case SDL_SCANCODE_KP_PERIOD:
                keyCode = 0x6E;
                break;
            case SDL_SCANCODE_KP_DIVIDE:
                keyCode = 0x6F;
                break;
            case SDL_SCANCODE_NUMLOCKCLEAR:
                keyCode = 0x90;
                break;
            case SDL_SCANCODE_SCROLLLOCK:
                keyCode = 0x91;
                break;
            case SDL_SCANCODE_LSHIFT:
                keyCode = 0xA0;
                break;
            case SDL_SCANCODE_RSHIFT:
                keyCode = 0xA1;
                break;
            case SDL_SCANCODE_LCTRL:
                keyCode = 0xA2;
                break;
            case SDL_SCANCODE_RCTRL:
                keyCode = 0xA3;
                break;
            case SDL_SCANCODE_LALT:
                keyCode = 0xA4;
                break;
            case SDL_SCANCODE_RALT:
                keyCode = 0xA5;
                break;
            // Until we can fully capture these on Windows, we should avoid
            // passing them through to the host.
            #ifndef Q_OS_WIN
            case SDL_SCANCODE_LGUI:
                keyCode = 0x5B;
                break;
            case SDL_SCANCODE_RGUI:
                keyCode = 0x5C;
                break;
            #endif
            case SDL_SCANCODE_AC_BACK:
                keyCode = 0xA6;
                break;
            case SDL_SCANCODE_AC_FORWARD:
                keyCode = 0xA7;
                break;
            case SDL_SCANCODE_AC_REFRESH:
                keyCode = 0xA8;
                break;
            case SDL_SCANCODE_AC_STOP:
                keyCode = 0xA9;
                break;
            case SDL_SCANCODE_AC_SEARCH:
                keyCode = 0xAA;
                break;
            case SDL_SCANCODE_AC_BOOKMARKS:
                keyCode = 0xAB;
                break;
            case SDL_SCANCODE_AC_HOME:
                keyCode = 0xAC;
                break;
            case SDL_SCANCODE_SEMICOLON:
                keyCode = 0xBA;
                break;
            case SDL_SCANCODE_EQUALS:
                keyCode = 0xBB;
                break;
            case SDL_SCANCODE_COMMA:
                keyCode = 0xBC;
                break;
            case SDL_SCANCODE_MINUS:
                keyCode = 0xBD;
                break;
            case SDL_SCANCODE_PERIOD:
                keyCode = 0xBE;
                break;
            case SDL_SCANCODE_SLASH:
                keyCode = 0xBF;
                break;
            case SDL_SCANCODE_GRAVE:
                keyCode = 0xC0;
                break;
            case SDL_SCANCODE_LEFTBRACKET:
                keyCode = 0xDB;
                break;
            case SDL_SCANCODE_BACKSLASH:
                keyCode = 0xDC;
                break;
            case SDL_SCANCODE_RIGHTBRACKET:
                keyCode = 0xDD;
                break;
            case SDL_SCANCODE_APOSTROPHE:
                keyCode = 0xDE;
                break;
            case SDL_SCANCODE_NONUSBACKSLASH:
                keyCode = 0xE2;
                break;
            default:
                SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                            "Unhandled button event: %d",
                             event->keysym.scancode);
                return;
        }
    }

    // Track the key state so we always know which keys are down
    if (event->state == SDL_PRESSED) {
        m_KeysDown.insert(keyCode);
    }
    else {
        m_KeysDown.remove(keyCode);
    }

    LiSendKeyboardEvent(keyCode,
                        event->state == SDL_PRESSED ?
                            KEY_ACTION_DOWN : KEY_ACTION_UP,
                        modifiers);
}

void SdlInputHandler::handleMouseButtonEvent(SDL_MouseButtonEvent* event)
{
    int button;

    // Capture the mouse again if clicked when unbound.
    // We start capture on left button released instead of
    // pressed to avoid sending an errant mouse button released
    // event to the host when clicking into our window (since
    // the pressed event was consumed by this code).
    if (event->button == SDL_BUTTON_LEFT &&
            event->state == SDL_RELEASED &&
            !isCaptureActive()) {
        setCaptureActive(true);
        return;
    }
    else if (!isCaptureActive()) {
        // Not capturing
        return;
    }
    else if (event->which == SDL_TOUCH_MOUSEID) {
        // Ignore synthetic mouse events
        return;
    }

    switch (event->button)
    {
        case SDL_BUTTON_LEFT:
            button = BUTTON_LEFT;
            break;
        case SDL_BUTTON_MIDDLE:
            button = BUTTON_MIDDLE;
            break;
        case SDL_BUTTON_RIGHT:
            button = BUTTON_RIGHT;
            break;
        case SDL_BUTTON_X1:
            button = BUTTON_X1;
            break;
        case SDL_BUTTON_X2:
            button = BUTTON_X2;
            break;
        default:
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Unhandled button event: %d",
                        event->button);
            return;
    }

    LiSendMouseButtonEvent(event->state == SDL_PRESSED ?
                               BUTTON_ACTION_PRESS :
                               BUTTON_ACTION_RELEASE,
                           button);
}

void SdlInputHandler::handleMouseMotionEvent(SDL_MouseMotionEvent* event)
{
    if (!isCaptureActive()) {
        // Not capturing
        return;
    }
    else if (event->which == SDL_TOUCH_MOUSEID) {
        // Ignore synthetic mouse events
        return;
    }

    // Batch until the next mouse polling window or we'll get awful
    // input lag everything except GFE 3.14 and 3.15.
    SDL_AtomicAdd(&m_MouseDeltaX, event->xrel);
    SDL_AtomicAdd(&m_MouseDeltaY, event->yrel);
}

void SdlInputHandler::handleMouseWheelEvent(SDL_MouseWheelEvent* event)
{
    if (!isCaptureActive()) {
        // Not capturing
        return;
    }
    else if (event->which == SDL_TOUCH_MOUSEID) {
        // Ignore synthetic mouse events
        return;
    }

    if (event->y != 0) {
        LiSendScrollEvent((signed char)event->y);
    }
}

GamepadState*
SdlInputHandler::findStateForGamepad(SDL_JoystickID id)
{
    int i;

    for (i = 0; i < MAX_GAMEPADS; i++) {
        if (m_GamepadState[i].jsId == id) {
            SDL_assert(!m_MultiController || m_GamepadState[i].index == i);
            return &m_GamepadState[i];
        }
    }

    // This should only happen with > 4 gamepads
    SDL_assert(SDL_NumJoysticks() > 4);
    return nullptr;
}

void SdlInputHandler::sendGamepadState(GamepadState* state)
{
    SDL_assert(m_GamepadMask == 0x1 || m_MultiController);
    LiSendMultiControllerEvent(state->index,
                               m_GamepadMask,
                               state->buttons,
                               state->lt,
                               state->rt,
                               state->lsX,
                               state->lsY,
                               state->rsX,
                               state->rsY);
}

Uint32 SdlInputHandler::releaseLeftButtonTimerCallback(Uint32, void*)
{
    LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_LEFT);
    return 0;
}

Uint32 SdlInputHandler::releaseRightButtonTimerCallback(Uint32, void*)
{
    LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_RIGHT);
    return 0;
}

Uint32 SdlInputHandler::dragTimerCallback(Uint32, void *param)
{
    auto me = reinterpret_cast<SdlInputHandler*>(param);

    // Check how many fingers are down now to decide
    // which button to hold down
    if (me->m_NumFingersDown == 2) {
        me->m_DragButton = BUTTON_RIGHT;
    }
    else if (me->m_NumFingersDown == 1) {
        me->m_DragButton = BUTTON_LEFT;
    }

    LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, me->m_DragButton);

    return 0;
}

Uint32 SdlInputHandler::mouseMoveTimerCallback(Uint32 interval, void *param)
{
    auto me = reinterpret_cast<SdlInputHandler*>(param);

    short deltaX = (short)SDL_AtomicSet(&me->m_MouseDeltaX, 0);
    short deltaY = (short)SDL_AtomicSet(&me->m_MouseDeltaY, 0);

    if (deltaX != 0 || deltaY != 0) {
        LiSendMouseMoveEvent(deltaX, deltaY);
    }

    return interval;
}

Uint32 SdlInputHandler::mouseEmulationTimerCallback(Uint32 interval, void *param)
{
    auto gamepad = reinterpret_cast<GamepadState*>(param);

    short rawX;
    short rawY;

    // Determine which analog stick is currently receiving the strongest input
    if ((uint32_t)qAbs(gamepad->lsX) + qAbs(gamepad->lsY) > (uint32_t)qAbs(gamepad->rsX) + qAbs(gamepad->rsY)) {
        rawX = gamepad->lsX;
        rawY = -gamepad->lsY;
    }
    else {
        rawX = gamepad->rsX;
        rawY = -gamepad->rsY;
    }

    float deltaX;
    float deltaY;

    // Produce a base vector for mouse movement with increased speed as we deviate further from center
    deltaX = qPow(rawX / 32766.0f * MOUSE_EMULATION_MOTION_MULTIPLIER, 3);
    deltaY = qPow(rawY / 32766.0f * MOUSE_EMULATION_MOTION_MULTIPLIER, 3);

    // Enforce deadzones
    deltaX = qAbs(deltaX) > MOUSE_EMULATION_DEADZONE ? deltaX - MOUSE_EMULATION_DEADZONE : 0;
    deltaY = qAbs(deltaY) > MOUSE_EMULATION_DEADZONE ? deltaY - MOUSE_EMULATION_DEADZONE : 0;

    if (deltaX != 0 || deltaY != 0) {
        LiSendMouseMoveEvent((short)deltaX, (short)deltaY);
    }

    return interval;
}

void SdlInputHandler::handleControllerAxisEvent(SDL_ControllerAxisEvent* event)
{
    SDL_JoystickID gameControllerId = event->which;
    GamepadState* state = findStateForGamepad(gameControllerId);
    if (state == NULL) {
        return;
    }

    // Batch all pending axis motion events for this gamepad to save CPU time
    SDL_Event nextEvent;
    for (;;) {
        switch (event->axis)
        {
            case SDL_CONTROLLER_AXIS_LEFTX:
                state->lsX = event->value;
                break;
            case SDL_CONTROLLER_AXIS_LEFTY:
                // Signed values have one more negative value than
                // positive value, so inverting the sign on -32768
                // could actually cause the value to overflow and
                // wrap around to be negative again. Avoid that by
                // capping the value at 32767.
                state->lsY = -qMax(event->value, (short)-32767);
                break;
            case SDL_CONTROLLER_AXIS_RIGHTX:
                state->rsX = event->value;
                break;
            case SDL_CONTROLLER_AXIS_RIGHTY:
                state->rsY = -qMax(event->value, (short)-32767);
                break;
            case SDL_CONTROLLER_AXIS_TRIGGERLEFT:
                state->lt = (unsigned char)(event->value * 255UL / 32767);
                break;
            case SDL_CONTROLLER_AXIS_TRIGGERRIGHT:
                state->rt = (unsigned char)(event->value * 255UL / 32767);
                break;
            default:
                SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                            "Unhandled controller axis: %d",
                            event->axis);
                return;
        }

        // Check for another event to batch with
        if (SDL_PeepEvents(&nextEvent, 1, SDL_PEEKEVENT, SDL_CONTROLLERAXISMOTION, SDL_CONTROLLERAXISMOTION) <= 0) {
            break;
        }

        event = &nextEvent.caxis;
        if (event->which != gameControllerId) {
            // Stop batching if a different gamepad interrupts us
            break;
        }

        // Remove the next event to batch
        SDL_PeepEvents(&nextEvent, 1, SDL_GETEVENT, SDL_CONTROLLERAXISMOTION, SDL_CONTROLLERAXISMOTION);
    }

    // Only send the gamepad state to the host if it's not in mouse emulation mode
    if (state->mouseEmulationTimer == 0) {
        sendGamepadState(state);
    }
}

void SdlInputHandler::handleControllerButtonEvent(SDL_ControllerButtonEvent* event)
{
    GamepadState* state = findStateForGamepad(event->which);
    if (state == NULL) {
        return;
    }

    if (event->state == SDL_PRESSED) {
        state->buttons |= k_ButtonMap[event->button];

        if (event->button == SDL_CONTROLLER_BUTTON_START) {
            state->lastStartDownTime = SDL_GetTicks();
        }
        else if (state->mouseEmulationTimer != 0) {
            if (event->button == SDL_CONTROLLER_BUTTON_A) {
                LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_LEFT);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_B) {
                LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_RIGHT);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_X) {
                LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_MIDDLE);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_LEFTSHOULDER) {
                LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_X1);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_RIGHTSHOULDER) {
                LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_X2);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_DPAD_UP) {
                LiSendScrollEvent(1);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_DPAD_DOWN) {
                LiSendScrollEvent(-1);
            }
        }
    }
    else {
        state->buttons &= ~k_ButtonMap[event->button];

        if (event->button == SDL_CONTROLLER_BUTTON_START) {
            if (SDL_GetTicks() - state->lastStartDownTime > MOUSE_EMULATION_LONG_PRESS_TIME) {
                if (state->mouseEmulationTimer != 0) {
                    SDL_RemoveTimer(state->mouseEmulationTimer);
                    state->mouseEmulationTimer = 0;

                    SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                                "Mouse emulation deactivated");
                    Session::get()->notifyMouseEmulationMode(false);
                }
                else if (m_GamepadMouse) {
                    // Send the start button up event to the host, since we won't do it below
                    sendGamepadState(state);

                    state->mouseEmulationTimer = SDL_AddTimer(MOUSE_EMULATION_POLLING_INTERVAL, SdlInputHandler::mouseEmulationTimerCallback, state);

                    SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                                "Mouse emulation active");
                    Session::get()->notifyMouseEmulationMode(true);
                }
            }
        }
        else if (state->mouseEmulationTimer != 0) {
            if (event->button == SDL_CONTROLLER_BUTTON_A) {
                LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_LEFT);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_B) {
                LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_RIGHT);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_X) {
                LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_MIDDLE);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_LEFTSHOULDER) {
                LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_X1);
            }
            else if (event->button == SDL_CONTROLLER_BUTTON_RIGHTSHOULDER) {
                LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_X2);
            }
        }
    }

    // Handle Start+Select+L1+R1 as a gamepad quit combo
    if (state->buttons == (PLAY_FLAG | BACK_FLAG | LB_FLAG | RB_FLAG)) {
        SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                    "Detected quit gamepad button combo");

        // Push a quit event to the main loop
        SDL_Event event;
        event.type = SDL_QUIT;
        event.quit.timestamp = SDL_GetTicks();
        SDL_PushEvent(&event);

        // Clear buttons down on this gameapd
        LiSendMultiControllerEvent(state->index, m_GamepadMask,
                                   0, 0, 0, 0, 0, 0, 0);
        return;
    }

    // Only send the gamepad state to the host if it's not in mouse emulation mode
    if (state->mouseEmulationTimer == 0) {
        sendGamepadState(state);
    }
}

void SdlInputHandler::handleControllerDeviceEvent(SDL_ControllerDeviceEvent* event)
{
    GamepadState* state;

    if (event->type == SDL_CONTROLLERDEVICEADDED) {
        int i;
        const char* name;
        SDL_GameController* controller;
        const char* mapping;
        char guidStr[33];
        uint32_t hapticCaps;

        controller = SDL_GameControllerOpen(event->which);
        if (controller == NULL) {
            SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                         "Failed to open gamepad: %s",
                         SDL_GetError());
            return;
        }

        // We used to use SDL_GameControllerGetPlayerIndex() here but that
        // can lead to strange issues due to bugs in Windows where an Xbox
        // controller will join as player 2, even though no player 1 controller
        // is connected at all. This pretty much screws any attempt to use
        // the gamepad in single player games, so just assign them in order from 0.
        i = 0;

        for (; i < MAX_GAMEPADS; i++) {
            SDL_assert(m_GamepadState[i].controller != controller);
            if (m_GamepadState[i].controller == NULL) {
                // Found an empty slot
                break;
            }
        }

        if (i == MAX_GAMEPADS) {
            SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                         "No open gamepad slots found!");
            SDL_GameControllerClose(controller);
            return;
        }

        state = &m_GamepadState[i];
        if (m_MultiController) {
            state->index = i;
        }
        else {
            // Always player 1 in single controller mode
            state->index = 0;
        }

        state->controller = controller;
        state->jsId = SDL_JoystickInstanceID(SDL_GameControllerGetJoystick(state->controller));

#if SDL_VERSION_ATLEAST(2, 0, 9)
        // Perform a no-op rumble to see if haptics are supported
        hapticCaps = SDL_GameControllerRumble(controller, 0, 0, 0) == 0 ?
                        ML_HAPTIC_GC_RUMBLE : 0;
#else
        state->haptic = SDL_HapticOpenFromJoystick(SDL_GameControllerGetJoystick(state->controller));
        state->hapticEffectId = -1;
        state->hapticMethod = GAMEPAD_HAPTIC_METHOD_NONE;
        if (state->haptic != nullptr) {
            // Query for supported haptic effects
            hapticCaps = SDL_HapticQuery(state->haptic);
            hapticCaps |= SDL_HapticRumbleSupported(state->haptic) ?
                            ML_HAPTIC_SIMPLE_RUMBLE : 0;

            if ((SDL_HapticQuery(state->haptic) & SDL_HAPTIC_LEFTRIGHT) == 0) {
                if (SDL_HapticRumbleSupported(state->haptic)) {
                    if (SDL_HapticRumbleInit(state->haptic) == 0) {
                        state->hapticMethod = GAMEPAD_HAPTIC_METHOD_SIMPLERUMBLE;
                    }
                }
                if (state->hapticMethod == GAMEPAD_HAPTIC_METHOD_NONE) {
                    SDL_HapticClose(state->haptic);
                    state->haptic = nullptr;
                }
            } else {
                state->hapticMethod = GAMEPAD_HAPTIC_METHOD_LEFTRIGHT;
            }
        }
        else {
            hapticCaps = 0;
        }
#endif

        SDL_JoystickGetGUIDString(SDL_JoystickGetGUID(SDL_GameControllerGetJoystick(state->controller)),
                                  guidStr, sizeof(guidStr));
        mapping = SDL_GameControllerMapping(state->controller);
        name = SDL_GameControllerName(state->controller);
        SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                    "Gamepad %d (player %d) is: %s (haptic capabilities: 0x%x) (mapping: %s -> %s)",
                    i,
                    state->index,
                    name != nullptr ? name : "<null>",
                    hapticCaps,
                    guidStr,
                    mapping != nullptr ? mapping : "<null>");
        if (mapping != nullptr) {
            SDL_free((void*)mapping);
        }
        
        // Add this gamepad to the gamepad mask
        if (m_MultiController) {
            // NB: Don't assert that it's unset here because we will already
            // have the mask set for initially attached gamepads to avoid confusing
            // apps running on the host.
            m_GamepadMask |= (1 << state->index);
        }
        else {
            SDL_assert(m_GamepadMask == 0x1);
        }

        // Send an empty event to tell the PC we've arrived
        sendGamepadState(state);
    }
    else if (event->type == SDL_CONTROLLERDEVICEREMOVED) {
        state = findStateForGamepad(event->which);
        if (state != NULL) {
            if (state->mouseEmulationTimer != 0) {
                Session::get()->notifyMouseEmulationMode(false);
                SDL_RemoveTimer(state->mouseEmulationTimer);
            }

            SDL_GameControllerClose(state->controller);

#if !SDL_VERSION_ATLEAST(2, 0, 9)
            if (state->haptic != nullptr) {
                SDL_HapticClose(state->haptic);
            }
#endif

            // Remove this from the gamepad mask in MC-mode
            if (m_MultiController) {
                SDL_assert(m_GamepadMask & (1 << state->index));
                m_GamepadMask &= ~(1 << state->index);
            }
            else {
                SDL_assert(m_GamepadMask == 0x1);
            }

            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Gamepad %d is gone",
                        state->index);

            // Send a final event to let the PC know this gamepad is gone
            LiSendMultiControllerEvent(state->index, m_GamepadMask,
                                       0, 0, 0, 0, 0, 0, 0);

            // Clear all remaining state from this slot
            SDL_memset(state, 0, sizeof(*state));
        }
    }
}

void SdlInputHandler::handleJoystickArrivalEvent(SDL_JoyDeviceEvent* event)
{
    SDL_assert(event->type == SDL_JOYDEVICEADDED);

    if (!SDL_IsGameController(event->which)) {
        char guidStr[33];
        SDL_JoystickGetGUIDString(SDL_JoystickGetDeviceGUID(event->which),
                                  guidStr, sizeof(guidStr));
        const char* name = SDL_JoystickNameForIndex(event->which);
        SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                    "Joystick discovered with no mapping: %s %s",
                    name ? name : "<UNKNOWN>",
                    guidStr);
        SDL_Joystick* joy = SDL_JoystickOpen(event->which);
        if (joy != nullptr) {
            SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                        "Number of axes: %d | Number of buttons: %d | Number of hats: %d",
                        SDL_JoystickNumAxes(joy), SDL_JoystickNumButtons(joy),
                        SDL_JoystickNumHats(joy));
            SDL_JoystickClose(joy);
        }
        else {
            SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                        "Unable to open joystick for query: %s",
                        SDL_GetError());
        }
    }
}

void SdlInputHandler::rumble(unsigned short controllerNumber, unsigned short lowFreqMotor, unsigned short highFreqMotor)
{
    // Make sure the controller number is within our supported count
    if (controllerNumber >= MAX_GAMEPADS) {
        return;
    }

#if SDL_VERSION_ATLEAST(2, 0, 9)
    if (m_GamepadState[controllerNumber].controller != nullptr) {
        SDL_GameControllerRumble(m_GamepadState[controllerNumber].controller, lowFreqMotor, highFreqMotor, 30000);
    }
#else
    // Check if the controller supports haptics (and if the controller exists at all)
    SDL_Haptic* haptic = m_GamepadState[controllerNumber].haptic;
    if (haptic == nullptr) {
        return;
    }

    // Stop the last effect we played
    if (m_GamepadState[controllerNumber].hapticMethod == GAMEPAD_HAPTIC_METHOD_LEFTRIGHT) {
        if (m_GamepadState[controllerNumber].hapticEffectId >= 0) {
            SDL_HapticDestroyEffect(haptic, m_GamepadState[controllerNumber].hapticEffectId);
        }
    } else if (m_GamepadState[controllerNumber].hapticMethod == GAMEPAD_HAPTIC_METHOD_SIMPLERUMBLE) {
        SDL_HapticRumbleStop(haptic);
    }

    // If this callback is telling us to stop both motors, don't bother queuing a new effect
    if (lowFreqMotor == 0 && highFreqMotor == 0) {
        return;
    }

    if (m_GamepadState[controllerNumber].hapticMethod == GAMEPAD_HAPTIC_METHOD_LEFTRIGHT) {
        SDL_HapticEffect effect;
        SDL_memset(&effect, 0, sizeof(effect));
        effect.type = SDL_HAPTIC_LEFTRIGHT;

        // The effect should last until we are instructed to stop or change it
        effect.leftright.length = SDL_HAPTIC_INFINITY;

        // SDL haptics range from 0-32767 but XInput uses 0-65535, so divide by 2 to correct for SDL's scaling
        effect.leftright.large_magnitude = lowFreqMotor / 2;
        effect.leftright.small_magnitude = highFreqMotor / 2;

        // Play the new effect
        m_GamepadState[controllerNumber].hapticEffectId = SDL_HapticNewEffect(haptic, &effect);
        if (m_GamepadState[controllerNumber].hapticEffectId >= 0) {
            SDL_HapticRunEffect(haptic, m_GamepadState[controllerNumber].hapticEffectId, 1);
        }
    } else if (m_GamepadState[controllerNumber].hapticMethod == GAMEPAD_HAPTIC_METHOD_SIMPLERUMBLE) {
        SDL_HapticRumblePlay(haptic,
                             std::min(1.0, (GAMEPAD_HAPTIC_SIMPLE_HIFREQ_MOTOR_WEIGHT*highFreqMotor +
                                            GAMEPAD_HAPTIC_SIMPLE_LOWFREQ_MOTOR_WEIGHT*lowFreqMotor) / 65535.0),
                             SDL_HAPTIC_INFINITY);
    }
#endif
}

void SdlInputHandler::handleTouchFingerEvent(SDL_TouchFingerEvent* event)
{
    int fingerIndex = -1;

#if SDL_VERSION_ATLEAST(2, 0, 10)
    if (SDL_GetTouchDeviceType(event->touchId) != SDL_TOUCH_DEVICE_DIRECT) {
        // Ignore anything that isn't a touchscreen. We may get callbacks
        // for trackpads, but we want to handle those in the mouse path.
        return;
    }
#elif defined(Q_OS_DARWIN)
    // SDL2 sends touch events from trackpads by default on
    // macOS. This totally screws our actual mouse handling,
    // so we must explicitly ignore touch events on macOS
    // until SDL 2.0.10 where we have SDL_GetTouchDeviceType()
    // to tell them apart.
    return;
#endif

    // Observations on Windows 10: x and y appear to be relative to 0,0 of the window client area.
    // Although SDL documentation states they are 0.0 - 1.0 float values, they can actually be higher
    // or lower than those values as touch events continue for touches started within the client area that
    // leave the client area during a drag motion.
    // dx and dy are deltas from the last touch event, not the first touch down.

    // Determine the index of this finger using our list
    // of fingers that are currently active on screen.
    // This is also required to handle finger up which
    // where the finger will not be in SDL_GetTouchFinger()
    // anymore.
    if (event->type != SDL_FINGERDOWN) {
        for (int i = 0; i < MAX_FINGERS; i++) {
            if (event->fingerId == m_TouchDownEvent[i].fingerId) {
                fingerIndex = i;
                break;
            }
        }
    }
    else {
        // Resolve the new finger by determining the ID of each
        // finger on the display.
        int numTouchFingers = SDL_GetNumTouchFingers(event->touchId);
        for (int i = 0; i < numTouchFingers; i++) {
            SDL_Finger* finger = SDL_GetTouchFinger(event->touchId, i);
            SDL_assert(finger != nullptr);
            if (finger != nullptr) {
                if (finger->id == event->fingerId) {
                    fingerIndex = i;
                    break;
                }
            }
        }
    }

    if (fingerIndex < 0 || fingerIndex >= MAX_FINGERS) {
        // Too many fingers
        return;
    }

    // Handle cursor motion based on the position of the
    // primary finger on screen
    if (fingerIndex == 0) {
        // The event x and y values are relative to our window width
        // and height. However, we want to scale them to be relative
        // to the host resolution. Fortunately this is easy since we
        // already have normalized values. We'll just multiply them
        // by the stream dimensions to get real X and Y values rather
        // than the client window dimensions.
        short deltaX = static_cast<short>(event->dx * m_StreamWidth);
        short deltaY = static_cast<short>(event->dy * m_StreamHeight);
        if (deltaX != 0 || deltaY != 0) {
            LiSendMouseMoveEvent(deltaX, deltaY);
        }
    }

    // Start a drag timer when primary or secondary
    // fingers go down
    if (event->type == SDL_FINGERDOWN &&
            (fingerIndex == 0 || fingerIndex == 1)) {
        SDL_RemoveTimer(m_DragTimer);
        m_DragTimer = SDL_AddTimer(DRAG_ACTIVATION_DELAY,
                                   dragTimerCallback,
                                   this);
    }

    if (event->type == SDL_FINGERMOTION) {
        // Count the total cumulative dx/dy that the finger
        // has moved.
        m_CumulativeDelta[fingerIndex] += qAbs(event->x);
        m_CumulativeDelta[fingerIndex] += qAbs(event->y);

        // If it's outside the deadzone delta, cancel drags and taps
        if (m_CumulativeDelta[fingerIndex] > DEAD_ZONE_DELTA) {
            SDL_RemoveTimer(m_DragTimer);
            m_DragTimer = 0;

            // This effectively cancels the tap logic below
            m_TouchDownEvent[fingerIndex].timestamp = 0;
        }
    }

    if (event->type == SDL_FINGERUP) {
        // Cancel the drag timer on finger up
        SDL_RemoveTimer(m_DragTimer);
        m_DragTimer = 0;

        // Release any drag
        if (m_DragButton != 0) {
            LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, m_DragButton);
            m_DragButton = 0;
        }
        // 2 finger tap
        else if (event->timestamp - m_TouchDownEvent[1].timestamp < 250) {
            // Zero timestamp of the primary finger to ensure we won't
            // generate a left click if the primary finger comes up soon.
            m_TouchDownEvent[0].timestamp = 0;

            // Press down the right mouse button
            LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_RIGHT);

            // Queue a timer to release it in 100 ms
            SDL_RemoveTimer(m_RightButtonReleaseTimer);
            m_RightButtonReleaseTimer = SDL_AddTimer(TAP_BUTTON_RELEASE_DELAY,
                                                     releaseRightButtonTimerCallback,
                                                     nullptr);
        }
        // 1 finger tap
        else if (event->timestamp - m_TouchDownEvent[0].timestamp < 250) {
            // Press down the left mouse button
            LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_LEFT);

            // Queue a timer to release it in 100 ms
            SDL_RemoveTimer(m_LeftButtonReleaseTimer);
            m_LeftButtonReleaseTimer = SDL_AddTimer(TAP_BUTTON_RELEASE_DELAY,
                                                    releaseLeftButtonTimerCallback,
                                                    nullptr);
        }
    }

    m_NumFingersDown = SDL_GetNumTouchFingers(event->touchId);

    if (event->type == SDL_FINGERDOWN) {      
        m_TouchDownEvent[fingerIndex] = *event;
        m_CumulativeDelta[fingerIndex] = 0;
    }
    else if (event->type == SDL_FINGERUP) {
        m_TouchDownEvent[fingerIndex] = {};
    }
}

int SdlInputHandler::getAttachedGamepadMask()
{
    int count;
    int mask;

    if (!m_MultiController) {
        // Player 1 is always present in non-MC mode
        return 0x1;
    }

    count = mask = 0;
    for (int i = 0; i < SDL_NumJoysticks(); i++) {
        if (SDL_IsGameController(i)) {
            mask |= (1 << count++);
        }
    }

    return mask;
}

void SdlInputHandler::raiseAllKeys()
{
    if (m_KeysDown.isEmpty()) {
        return;
    }

    SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                "Raising %d keys",
                m_KeysDown.count());

    for (auto keyDown : m_KeysDown) {
        LiSendKeyboardEvent(keyDown, KEY_ACTION_UP, 0);
    }

    m_KeysDown.clear();
}

bool SdlInputHandler::isCaptureActive()
{
    if (SDL_GetRelativeMouseMode()) {
        return true;
    }

    // Some platforms don't support SDL_SetRelativeMouseMode
    return m_FakeCaptureActive;
}

void SdlInputHandler::setCaptureActive(bool active)
{
    if (active) {
        // Try to activate SDL's relative mouse mode
        if (SDL_SetRelativeMouseMode(SDL_TRUE) < 0) {
            // Relative mouse mode didn't work, so we'll use fake capture
            SDL_ShowCursor(SDL_DISABLE);
            m_FakeCaptureActive = true;
        }
    }
    else if (m_FakeCaptureActive) {
        SDL_ShowCursor(SDL_ENABLE);
        m_FakeCaptureActive = false;
    }
    else {
        SDL_SetRelativeMouseMode(SDL_FALSE);
    }
}

QString SdlInputHandler::getUnmappedGamepads()
{
    QString ret;

    if (SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) failed: %s",
                     SDL_GetError());
    }

    MappingManager mappingManager;
    mappingManager.applyMappings();

    for (int i = 0; i < SDL_NumJoysticks(); i++) {
        if (!SDL_IsGameController(i)) {
            char guidStr[33];
            SDL_JoystickGetGUIDString(SDL_JoystickGetDeviceGUID(i),
                                      guidStr, sizeof(guidStr));
            const char* name = SDL_JoystickNameForIndex(i);
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Unmapped joystick: %s %s",
                        name ? name : "<UNKNOWN>",
                        guidStr);
            SDL_Joystick* joy = SDL_JoystickOpen(i);
            if (joy != nullptr) {
                int numButtons = SDL_JoystickNumButtons(joy);
                int numHats = SDL_JoystickNumHats(joy);
                int numAxes = SDL_JoystickNumAxes(joy);

                SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                            "Number of axes: %d | Number of buttons: %d | Number of hats: %d",
                            numAxes, numButtons, numHats);

                if ((numAxes >= 4 && numAxes <= 8) && numButtons >= 8 && numHats <= 1) {
                    SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                                "Joystick likely to be an unmapped game controller");
                    if (!ret.isEmpty()) {
                        ret += ", ";
                    }

                    ret += name;
                }

                SDL_JoystickClose(joy);
            }
            else {
                SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                            "Unable to open joystick for query: %s",
                            SDL_GetError());
            }
        }
    }

    SDL_QuitSubSystem(SDL_INIT_GAMECONTROLLER);

    return ret;
}