moonlight-qt/app/streaming/input.cpp

#include <Limelight.h>
#include <SDL.h>
#include "streaming/session.h"
#include "settings/mappingmanager.h"
#include "path.h"

#include <QtGlobal>
#include <QDir>

#define VK_0 0x30
#define VK_A 0x41

// These are real Windows VK_* codes
#ifndef VK_F1
#define VK_F1 0x70
#define VK_F13 0x7C
#define VK_NUMPAD0 0x60
#endif

#define MOUSE_POLLING_INTERVAL 5

// How long the mouse button will be pressed for a tap to click gesture
#define TAP_BUTTON_RELEASE_DELAY 100

// How long the fingers must be stationary to start a drag
#define DRAG_ACTIVATION_DELAY 650

// How far the finger can move before it cancels a drag or tap
#define DEAD_ZONE_DELTA 0.1f

const int SdlInputHandler::k_ButtonMap[] = {
    A_FLAG, B_FLAG, X_FLAG, Y_FLAG,
    BACK_FLAG, SPECIAL_FLAG, PLAY_FLAG,
    LS_CLK_FLAG, RS_CLK_FLAG,
    LB_FLAG, RB_FLAG,
    UP_FLAG, DOWN_FLAG, LEFT_FLAG, RIGHT_FLAG
};

SdlInputHandler::SdlInputHandler(StreamingPreferences& prefs, NvComputer*, int streamWidth, int streamHeight)
    : m_MultiController(prefs.multiController),
      m_MouseMoveTimer(0),
      m_LeftButtonReleaseTimer(0),
      m_RightButtonReleaseTimer(0),
      m_DragTimer(0),
      m_DragButton(0),
      m_NumFingersDown(0),
      m_StreamWidth(streamWidth),
      m_StreamHeight(streamHeight)
{
    // Allow gamepad input when the app doesn't have focus
    SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "1");

    // If mouse acceleration is enabled, use relative mode warp (which
    // is via normal motion events that are influenced by mouse acceleration).
    // Otherwise, we'll use raw input capture which is straight from the device
    // without modification by the OS.
    SDL_SetHint(SDL_HINT_MOUSE_RELATIVE_MODE_WARP,
                prefs.mouseAcceleration ? "1" : "0");

    // We must initialize joystick explicitly before gamecontroller in order
    // to ensure we receive gamecontroller attach events for gamepads where
    // SDL doesn't have a built-in mapping. By starting joystick first, we
    // can allow mapping manager to update the mappings before GC attach
    // events are generated.
    SDL_assert(!SDL_WasInit(SDL_INIT_JOYSTICK));
    if (SDL_InitSubSystem(SDL_INIT_JOYSTICK) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_JOYSTICK) failed: %s",
                     SDL_GetError());
    }

    MappingManager mappingManager;
    mappingManager.applyMappings();

    // We need to reinit this each time, since you only get
    // an initial set of gamepad arrival events once per init.
    SDL_assert(!SDL_WasInit(SDL_INIT_GAMECONTROLLER));
    if (SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) failed: %s",
                     SDL_GetError());
    }

    SDL_assert(!SDL_WasInit(SDL_INIT_HAPTIC));
    if (SDL_InitSubSystem(SDL_INIT_HAPTIC) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_HAPTIC) failed: %s",
                     SDL_GetError());
    }

    // Initialize the gamepad mask with currently attached gamepads to avoid
    // causing gamepads to unexpectedly disappear and reappear on the host
    // during stream startup as we detect currently attached gamepads one at a time.
    m_GamepadMask = getAttachedGamepadMask();

    SDL_zero(m_GamepadState);
    SDL_zero(m_TouchDownEvent);
    SDL_zero(m_CumulativeDelta);

    SDL_AtomicSet(&m_MouseDeltaX, 0);
    SDL_AtomicSet(&m_MouseDeltaY, 0);

    m_MouseMoveTimer = SDL_AddTimer(MOUSE_POLLING_INTERVAL, SdlInputHandler::mouseMoveTimerCallback, this);
}

SdlInputHandler::~SdlInputHandler()
{
    for (int i = 0; i < MAX_GAMEPADS; i++) {
        if (m_GamepadState[i].haptic != nullptr) {
            SDL_HapticClose(m_GamepadState[i].haptic);
        }
        if (m_GamepadState[i].controller != nullptr) {
            SDL_GameControllerClose(m_GamepadState[i].controller);
        }
    }

    SDL_RemoveTimer(m_MouseMoveTimer);
    SDL_RemoveTimer(m_LeftButtonReleaseTimer);
    SDL_RemoveTimer(m_RightButtonReleaseTimer);
    SDL_RemoveTimer(m_DragTimer);

    SDL_QuitSubSystem(SDL_INIT_HAPTIC);
    SDL_assert(!SDL_WasInit(SDL_INIT_HAPTIC));

    SDL_QuitSubSystem(SDL_INIT_GAMECONTROLLER);
    SDL_assert(!SDL_WasInit(SDL_INIT_GAMECONTROLLER));

    SDL_QuitSubSystem(SDL_INIT_JOYSTICK);
    SDL_assert(!SDL_WasInit(SDL_INIT_JOYSTICK));
}

void SdlInputHandler::handleKeyEvent(SDL_KeyboardEvent* event)
{
    short keyCode;
    char modifiers;

    // Check for our special key combos
    if ((event->state == SDL_PRESSED) &&
            (event->keysym.mod & KMOD_CTRL) &&
            (event->keysym.mod & KMOD_ALT) &&
            (event->keysym.mod & KMOD_SHIFT)) {
        // Check for quit combo (Ctrl+Alt+Shift+Q)
        if (event->keysym.sym == SDLK_q) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected quit key combo");

            // Push a quit event to the main loop
            SDL_Event event;
            event.type = SDL_QUIT;
            event.quit.timestamp = SDL_GetTicks();
            SDL_PushEvent(&event);
            return;
        }
        // Check for the unbind combo (Ctrl+Alt+Shift+Z)
        else if (event->keysym.sym == SDLK_z) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected mouse capture toggle combo");

            // Stop handling future input
            SDL_SetRelativeMouseMode((SDL_bool)!SDL_GetRelativeMouseMode());

            // Force raise all keys to ensure they aren't stuck,
            // since we won't get their key up events.
            raiseAllKeys();
            return;
        }
        // Check for the full-screen combo (Ctrl+Alt+Shift+X)
        else if (event->keysym.sym == SDLK_x) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected full-screen toggle combo");
            Session::s_ActiveSession->toggleFullscreen();

            // Force raise all keys just be safe across this full-screen/windowed
            // transition just in case key events get lost.
            raiseAllKeys();
            return;
        }
        else if (event->keysym.sym == SDLK_s) {
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Detected stats toggle combo");

            // Toggle the stats overlay
            Session::get()->getOverlayManager().setOverlayState(OverlayManager::OverlayDebug,
                                                                !Session::get()->getOverlayManager().isOverlayEnabled(OverlayManager::OverlayDebug));

            // Force raise all keys just be safe across this full-screen/windowed
            // transition just in case key events get lost.
            raiseAllKeys();
            return;
        }
    }

    if (!SDL_GetRelativeMouseMode()) {
        // Not capturing
        return;
    }

    // Set modifier flags
    modifiers = 0;
    if (event->keysym.mod & KMOD_CTRL) {
        modifiers |= MODIFIER_CTRL;
    }
    if (event->keysym.mod & KMOD_ALT) {
        modifiers |= MODIFIER_ALT;
    }
    if (event->keysym.mod & KMOD_SHIFT) {
        modifiers |= MODIFIER_SHIFT;
    }

    // Set keycode. We explicitly use scancode here because GFE will try to correct
    // for AZERTY layouts on the host but it depends on receiving VK_ values matching
    // a QWERTY layout to work.
    if (event->keysym.scancode >= SDL_SCANCODE_1 && event->keysym.scancode <= SDL_SCANCODE_9) {
        // SDL defines SDL_SCANCODE_0 > SDL_SCANCODE_9, so we need to handle that manually
        keyCode = (event->keysym.scancode - SDL_SCANCODE_1) + VK_0 + 1;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_A && event->keysym.scancode <= SDL_SCANCODE_Z) {
        keyCode = (event->keysym.scancode - SDL_SCANCODE_A) + VK_A;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_F1 && event->keysym.scancode <= SDL_SCANCODE_F12) {
        keyCode = (event->keysym.scancode - SDL_SCANCODE_F1) + VK_F1;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_F13 && event->keysym.scancode <= SDL_SCANCODE_F24) {
        keyCode = (event->keysym.scancode - SDL_SCANCODE_F13) + VK_F13;
    }
    else if (event->keysym.scancode >= SDL_SCANCODE_KP_1 && event->keysym.scancode <= SDL_SCANCODE_KP_9) {
        // SDL defines SDL_SCANCODE_KP_0 > SDL_SCANCODE_KP_9, so we need to handle that manually
        keyCode = (event->keysym.scancode - SDL_SCANCODE_KP_1) + VK_NUMPAD0 + 1;
    }
    else {
        switch (event->keysym.scancode) {
            case SDL_SCANCODE_BACKSPACE:
                keyCode = 0x08;
                break;
            case SDL_SCANCODE_TAB:
                keyCode = 0x09;
                break;
            case SDL_SCANCODE_CLEAR:
                keyCode = 0x0C;
                break;
            case SDL_SCANCODE_KP_ENTER: // FIXME: Is this correct?
            case SDL_SCANCODE_RETURN:
                keyCode = 0x0D;
                break;
            case SDL_SCANCODE_PAUSE:
                keyCode = 0x13;
                break;
            case SDL_SCANCODE_CAPSLOCK:
                keyCode = 0x14;
                break;
            case SDL_SCANCODE_ESCAPE:
                keyCode = 0x1B;
                break;
            case SDL_SCANCODE_SPACE:
                keyCode = 0x20;
                break;
            case SDL_SCANCODE_PAGEUP:
                keyCode = 0x21;
                break;
            case SDL_SCANCODE_PAGEDOWN:
                keyCode = 0x22;
                break;
            case SDL_SCANCODE_END:
                keyCode = 0x23;
                break;
            case SDL_SCANCODE_HOME:
                keyCode = 0x24;
                break;
            case SDL_SCANCODE_LEFT:
                keyCode = 0x25;
                break;
            case SDL_SCANCODE_UP:
                keyCode = 0x26;
                break;
            case SDL_SCANCODE_RIGHT:
                keyCode = 0x27;
                break;
            case SDL_SCANCODE_DOWN:
                keyCode = 0x28;
                break;
            case SDL_SCANCODE_SELECT:
                keyCode = 0x29;
                break;
            case SDL_SCANCODE_EXECUTE:
                keyCode = 0x2B;
                break;
            case SDL_SCANCODE_PRINTSCREEN:
                keyCode = 0x2C;
                break;
            case SDL_SCANCODE_INSERT:
                keyCode = 0x2D;
                break;
            case SDL_SCANCODE_DELETE:
                keyCode = 0x2E;
                break;
            case SDL_SCANCODE_HELP:
                keyCode = 0x2F;
                break;
            case SDL_SCANCODE_KP_0:
                // See comment above about why we only handle SDL_SCANCODE_KP_0 here
                keyCode = VK_NUMPAD0;
                break;
            case SDL_SCANCODE_0:
                // See comment above about why we only handle SDL_SCANCODE_0 here
                keyCode = VK_0;
                break;
            case SDL_SCANCODE_KP_MULTIPLY:
                keyCode = 0x6A;
                break;
            case SDL_SCANCODE_KP_PLUS:
                keyCode = 0x6B;
                break;
            case SDL_SCANCODE_KP_COMMA:
                keyCode = 0x6C;
                break;
            case SDL_SCANCODE_KP_MINUS:
                keyCode = 0x6D;
                break;
            case SDL_SCANCODE_KP_PERIOD:
                keyCode = 0x6E;
                break;
            case SDL_SCANCODE_KP_DIVIDE:
                keyCode = 0x6F;
                break;
            case SDL_SCANCODE_NUMLOCKCLEAR:
                keyCode = 0x90;
                break;
            case SDL_SCANCODE_SCROLLLOCK:
                keyCode = 0x91;
                break;
            case SDL_SCANCODE_LSHIFT:
                keyCode = 0xA0;
                break;
            case SDL_SCANCODE_RSHIFT:
                keyCode = 0xA1;
                break;
            case SDL_SCANCODE_LCTRL:
                keyCode = 0xA2;
                break;
            case SDL_SCANCODE_RCTRL:
                keyCode = 0xA3;
                break;
            case SDL_SCANCODE_LALT:
                keyCode = 0xA4;
                break;
            case SDL_SCANCODE_RALT:
                keyCode = 0xA5;
                break;
            case SDL_SCANCODE_AC_BACK:
                keyCode = 0xA6;
                break;
            case SDL_SCANCODE_AC_FORWARD:
                keyCode = 0xA7;
                break;
            case SDL_SCANCODE_AC_REFRESH:
                keyCode = 0xA8;
                break;
            case SDL_SCANCODE_AC_STOP:
                keyCode = 0xA9;
                break;
            case SDL_SCANCODE_AC_SEARCH:
                keyCode = 0xAA;
                break;
            case SDL_SCANCODE_AC_BOOKMARKS:
                keyCode = 0xAB;
                break;
            case SDL_SCANCODE_AC_HOME:
                keyCode = 0xAC;
                break;
            case SDL_SCANCODE_SEMICOLON:
                keyCode = 0xBA;
                break;
            case SDL_SCANCODE_EQUALS:
                keyCode = 0xBB;
                break;
            case SDL_SCANCODE_COMMA:
                keyCode = 0xBC;
                break;
            case SDL_SCANCODE_MINUS:
                keyCode = 0xBD;
                break;
            case SDL_SCANCODE_PERIOD:
                keyCode = 0xBE;
                break;
            case SDL_SCANCODE_SLASH:
                keyCode = 0xBF;
                break;
            case SDL_SCANCODE_GRAVE:
                keyCode = 0xC0;
                break;
            case SDL_SCANCODE_LEFTBRACKET:
                keyCode = 0xDB;
                break;
            case SDL_SCANCODE_BACKSLASH:
                keyCode = 0xDC;
                break;
            case SDL_SCANCODE_RIGHTBRACKET:
                keyCode = 0xDD;
                break;
            case SDL_SCANCODE_APOSTROPHE:
                keyCode = 0xDE;
                break;
            case SDL_SCANCODE_NONUSBACKSLASH:
                keyCode = 0xE2;
                break;
            default:
                SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                            "Unhandled button event: %d",
                             event->keysym.scancode);
                return;
        }
    }

    // Track the key state so we always know which keys are down
    if (event->state == SDL_PRESSED) {
        m_KeysDown.insert(keyCode);
    }
    else {
        m_KeysDown.remove(keyCode);
    }

    LiSendKeyboardEvent(keyCode,
                        event->state == SDL_PRESSED ?
                            KEY_ACTION_DOWN : KEY_ACTION_UP,
                        modifiers);
}

void SdlInputHandler::handleMouseButtonEvent(SDL_MouseButtonEvent* event)
{
    int button;

    // Capture the mouse again if clicked when unbound.
    // We start capture on left button released instead of
    // pressed to avoid sending an errant mouse button released
    // event to the host when clicking into our window (since
    // the pressed event was consumed by this code).
    if (event->button == SDL_BUTTON_LEFT &&
            event->state == SDL_RELEASED &&
            !SDL_GetRelativeMouseMode()) {
        SDL_SetRelativeMouseMode(SDL_TRUE);
        return;
    }
    else if (!SDL_GetRelativeMouseMode()) {
        // Not capturing
        return;
    }
    else if (event->which == SDL_TOUCH_MOUSEID) {
        // Ignore synthetic mouse events
        return;
    }

    switch (event->button)
    {
        case SDL_BUTTON_LEFT:
            button = BUTTON_LEFT;
            break;
        case SDL_BUTTON_MIDDLE:
            button = BUTTON_MIDDLE;
            break;
        case SDL_BUTTON_RIGHT:
            button = BUTTON_RIGHT;
            break;
        case SDL_BUTTON_X1:
            button = BUTTON_X1;
            break;
        case SDL_BUTTON_X2:
            button = BUTTON_X2;
            break;
        default:
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Unhandled button event: %d",
                        event->button);
            return;
    }

    LiSendMouseButtonEvent(event->state == SDL_PRESSED ?
                               BUTTON_ACTION_PRESS :
                               BUTTON_ACTION_RELEASE,
                           button);
}

void SdlInputHandler::handleMouseMotionEvent(SDL_MouseMotionEvent* event)
{
    if (!SDL_GetRelativeMouseMode()) {
        // Not capturing
        return;
    }
    else if (event->which == SDL_TOUCH_MOUSEID) {
        // Ignore synthetic mouse events
        return;
    }

    // Batch until the next mouse polling window or we'll get awful
    // input lag everything except GFE 3.14 and 3.15.
    SDL_AtomicAdd(&m_MouseDeltaX, event->xrel);
    SDL_AtomicAdd(&m_MouseDeltaY, event->yrel);
}

void SdlInputHandler::handleMouseWheelEvent(SDL_MouseWheelEvent* event)
{
    if (!SDL_GetRelativeMouseMode()) {
        // Not capturing
        return;
    }
    else if (event->which == SDL_TOUCH_MOUSEID) {
        // Ignore synthetic mouse events
        return;
    }

    if (event->y != 0) {
        LiSendScrollEvent((signed char)event->y);
    }
}

GamepadState*
SdlInputHandler::findStateForGamepad(SDL_JoystickID id)
{
    int i;

    for (i = 0; i < MAX_GAMEPADS; i++) {
        if (m_GamepadState[i].jsId == id) {
            SDL_assert(!m_MultiController || m_GamepadState[i].index == i);
            return &m_GamepadState[i];
        }
    }

    // This should only happen with > 4 gamepads
    SDL_assert(SDL_NumJoysticks() > 4);
    return nullptr;
}

void SdlInputHandler::sendGamepadState(GamepadState* state)
{
    SDL_assert(m_GamepadMask == 0x1 || m_MultiController);
    LiSendMultiControllerEvent(state->index,
                               m_GamepadMask,
                               state->buttons,
                               state->lt,
                               state->rt,
                               state->lsX,
                               state->lsY,
                               state->rsX,
                               state->rsY);
}

Uint32 SdlInputHandler::releaseLeftButtonTimerCallback(Uint32, void*)
{
    LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_LEFT);
    return 0;
}

Uint32 SdlInputHandler::releaseRightButtonTimerCallback(Uint32, void*)
{
    LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, BUTTON_RIGHT);
    return 0;
}

Uint32 SdlInputHandler::dragTimerCallback(Uint32, void *param)
{
    auto me = reinterpret_cast<SdlInputHandler*>(param);

    // Check how many fingers are down now to decide
    // which button to hold down
    if (me->m_NumFingersDown == 2) {
        me->m_DragButton = BUTTON_RIGHT;
    }
    else if (me->m_NumFingersDown == 1) {
        me->m_DragButton = BUTTON_LEFT;
    }

    LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, me->m_DragButton);

    return 0;
}

Uint32 SdlInputHandler::mouseMoveTimerCallback(Uint32 interval, void *param)
{
    auto me = reinterpret_cast<SdlInputHandler*>(param);

    short deltaX = (short)SDL_AtomicSet(&me->m_MouseDeltaX, 0);
    short deltaY = (short)SDL_AtomicSet(&me->m_MouseDeltaY, 0);

    if (deltaX != 0 || deltaY != 0) {
        LiSendMouseMoveEvent(deltaX, deltaY);
    }

    return interval;
}

void SdlInputHandler::handleControllerAxisEvent(SDL_ControllerAxisEvent* event)
{
    GamepadState* state = findStateForGamepad(event->which);
    if (state == NULL) {
        return;
    }

    switch (event->axis)
    {
        case SDL_CONTROLLER_AXIS_LEFTX:
            state->lsX = event->value;
            break;
        case SDL_CONTROLLER_AXIS_LEFTY:
            // Signed values have one more negative value than
            // positive value, so inverting the sign on -32768
            // could actually cause the value to overflow and
            // wrap around to be negative again. Avoid that by
            // capping the value at 32767.
            state->lsY = -qMax(event->value, (short)-32767);
            break;
        case SDL_CONTROLLER_AXIS_RIGHTX:
            state->rsX = event->value;
            break;
        case SDL_CONTROLLER_AXIS_RIGHTY:
            state->rsY = -qMax(event->value, (short)-32767);
            break;
        case SDL_CONTROLLER_AXIS_TRIGGERLEFT:
            state->lt = (unsigned char)(event->value * 255UL / 32767);
            break;
        case SDL_CONTROLLER_AXIS_TRIGGERRIGHT:
            state->rt = (unsigned char)(event->value * 255UL / 32767);
            break;
        default:
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Unhandled controller axis: %d",
                        event->axis);
            return;
    }

    sendGamepadState(state);
}

void SdlInputHandler::handleControllerButtonEvent(SDL_ControllerButtonEvent* event)
{
    GamepadState* state = findStateForGamepad(event->which);
    if (state == NULL) {
        return;
    }

    if (event->state == SDL_PRESSED) {
        state->buttons |= k_ButtonMap[event->button];
    }
    else {
        state->buttons &= ~k_ButtonMap[event->button];
    }

    // Handle Start+Select+L1+R1 as a gamepad quit combo
    if (state->buttons == (PLAY_FLAG | BACK_FLAG | LB_FLAG | RB_FLAG)) {
        SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                    "Detected quit gamepad button combo");

        // Push a quit event to the main loop
        SDL_Event event;
        event.type = SDL_QUIT;
        event.quit.timestamp = SDL_GetTicks();
        SDL_PushEvent(&event);

        // Clear buttons down on this gameapd
        LiSendMultiControllerEvent(state->index, m_GamepadMask,
                                   0, 0, 0, 0, 0, 0, 0);
        return;
    }

    sendGamepadState(state);
}

void SdlInputHandler::handleControllerDeviceEvent(SDL_ControllerDeviceEvent* event)
{
    GamepadState* state;

    if (event->type == SDL_CONTROLLERDEVICEADDED) {
        int i;
        const char* name;
        SDL_GameController* controller;
        const char* mapping;
        char guidStr[33];

        controller = SDL_GameControllerOpen(event->which);
        if (controller == NULL) {
            SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                         "Failed to open gamepad: %s",
                         SDL_GetError());
            return;
        }

#if SDL_VERSION_ATLEAST(2, 0, 9)
        // Determine this player's preferred index
        i = SDL_GameControllerGetPlayerIndex(controller);
        if (i < 0 || i >= MAX_GAMEPADS || m_GamepadState[i].controller != NULL) {
            // If the player index is unavailable or invalid, start searching from 0
            i = 0;
        }
#else
        // SDL 2.0.8 and earlier has no player number hints
        i = 0;
#endif

        for (; i < MAX_GAMEPADS; i++) {
            if (m_GamepadState[i].controller == NULL) {
                // Found an empty slot
                break;
            }
        }

        if (i == MAX_GAMEPADS) {
            SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                         "No open gamepad slots found!");
            SDL_GameControllerClose(controller);
            return;
        }

        state = &m_GamepadState[i];
        if (m_MultiController) {
            state->index = i;
        }
        else {
            // Always player 1 in single controller mode
            state->index = 0;
        }

        state->controller = controller;
        state->jsId = SDL_JoystickInstanceID(SDL_GameControllerGetJoystick(state->controller));
        state->haptic = SDL_HapticOpenFromJoystick(SDL_GameControllerGetJoystick(state->controller));
        state->hapticEffectId = -1;
        if (state->haptic != nullptr && (SDL_HapticQuery(state->haptic) & SDL_HAPTIC_LEFTRIGHT) == 0) {
            SDL_HapticClose(state->haptic);
            state->haptic = nullptr;
        }

        SDL_JoystickGetGUIDString(SDL_JoystickGetGUID(SDL_GameControllerGetJoystick(state->controller)),
                                  guidStr, sizeof(guidStr));
        mapping = SDL_GameControllerMapping(state->controller);
        name = SDL_GameControllerName(state->controller);
        SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                    "Gamepad %d (player %d) is: %s (%s -> %s)",
                    i,
                    state->index,
                    name != nullptr ? name : "<null>",
                    guidStr,
                    mapping != nullptr ? mapping : "<null>");
        if (mapping != nullptr) {
            SDL_free((void*)mapping);
        }
        
        // Add this gamepad to the gamepad mask
        if (m_MultiController) {
            // NB: Don't assert that it's unset here because we will already
            // have the mask set for initially attached gamepads to avoid confusing
            // apps running on the host.
            m_GamepadMask |= (1 << state->index);
        }
        else {
            SDL_assert(m_GamepadMask == 0x1);
        }

        // Send an empty event to tell the PC we've arrived
        sendGamepadState(state);
    }
    else if (event->type == SDL_CONTROLLERDEVICEREMOVED) {
        state = findStateForGamepad(event->which);
        if (state != NULL) {
            SDL_GameControllerClose(state->controller);
            if (state->haptic != nullptr) {
                SDL_HapticClose(state->haptic);
            }

            // Remove this from the gamepad mask in MC-mode
            if (m_MultiController) {
                SDL_assert(m_GamepadMask & (1 << state->index));
                m_GamepadMask &= ~(1 << state->index);
            }
            else {
                SDL_assert(m_GamepadMask == 0x1);
            }

            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Gamepad %d is gone",
                        state->index);

            // Send a final event to let the PC know this gamepad is gone
            LiSendMultiControllerEvent(state->index, m_GamepadMask,
                                       0, 0, 0, 0, 0, 0, 0);

            // Clear all remaining state from this slot
            SDL_memset(state, 0, sizeof(*state));
        }
    }
}

void SdlInputHandler::handleJoystickArrivalEvent(SDL_JoyDeviceEvent* event)
{
    SDL_assert(event->type == SDL_JOYDEVICEADDED);

    if (!SDL_IsGameController(event->which)) {
        char guidStr[33];
        SDL_JoystickGetGUIDString(SDL_JoystickGetDeviceGUID(event->which),
                                  guidStr, sizeof(guidStr));
        const char* name = SDL_JoystickNameForIndex(event->which);
        SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                    "Joystick discovered with no mapping: %s %s",
                    name ? name : "<UNKNOWN>",
                    guidStr);
        SDL_Joystick* joy = SDL_JoystickOpen(event->which);
        if (joy != nullptr) {
            SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                        "Number of axes: %d | Number of buttons: %d | Number of hats: %d",
                        SDL_JoystickNumAxes(joy), SDL_JoystickNumButtons(joy),
                        SDL_JoystickNumHats(joy));
            SDL_JoystickClose(joy);
        }
        else {
            SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                        "Unable to open joystick for query: %s",
                        SDL_GetError());
        }
    }
}

void SdlInputHandler::rumble(unsigned short controllerNumber, unsigned short lowFreqMotor, unsigned short highFreqMotor)
{
    SDL_Haptic* haptic = m_GamepadState[controllerNumber].haptic;
    SDL_HapticEffect effect;

    if (haptic == nullptr) {
        return;
    }

    SDL_memset(&effect, 0, sizeof(effect));
    effect.type = SDL_HAPTIC_LEFTRIGHT;
    effect.leftright.large_magnitude = lowFreqMotor;
    effect.leftright.small_magnitude = highFreqMotor;
    effect.leftright.length = 10000; // Choose 10 second max duration - can be cancelled sooner.

    if (m_GamepadState[controllerNumber].hapticEffectId >= 0) {
        SDL_HapticDestroyEffect(haptic, m_GamepadState[controllerNumber].hapticEffectId);
    }

    m_GamepadState[controllerNumber].hapticEffectId = SDL_HapticNewEffect(haptic, &effect);
    if (m_GamepadState[controllerNumber].hapticEffectId >= 0) {
        SDL_HapticRunEffect(haptic, m_GamepadState[controllerNumber].hapticEffectId, 1);
    }
}

void SdlInputHandler::handleTouchFingerEvent(SDL_TouchFingerEvent* event)
{
    int fingerIndex = -1;

    // Observations on Windows 10: x and y appear to be relative to 0,0 of the window client area.
    // Although SDL documentation states they are 0.0 - 1.0 float values, they can actually be higher
    // or lower than those values as touch events continue for touches started within the client area that
    // leave the client area during a drag motion.
    // dx and dy are deltas from the last touch event, not the first touch down.

    // Determine the index of this finger using our list
    // of fingers that are currently active on screen.
    // This is also required to handle finger up which
    // where the finger will not be in SDL_GetTouchFinger()
    // anymore.
    if (event->type != SDL_FINGERDOWN) {
        for (int i = 0; i < MAX_FINGERS; i++) {
            if (event->fingerId == m_TouchDownEvent[i].fingerId) {
                fingerIndex = i;
                break;
            }
        }
    }
    else {
        // Resolve the new finger by determining the ID of each
        // finger on the display.
        int numTouchFingers = SDL_GetNumTouchFingers(event->touchId);
        for (int i = 0; i < numTouchFingers; i++) {
            SDL_Finger* finger = SDL_GetTouchFinger(event->touchId, i);
            SDL_assert(finger != nullptr);
            if (finger != nullptr) {
                if (finger->id == event->fingerId) {
                    fingerIndex = i;
                    break;
                }
            }
        }
    }

    if (fingerIndex < 0 || fingerIndex >= MAX_FINGERS) {
        // Too many fingers
        return;
    }

    // Handle cursor motion based on the position of the
    // primary finger on screen
    if (fingerIndex == 0) {
        // The event x and y values are relative to our window width
        // and height. However, we want to scale them to be relative
        // to the host resolution. Fortunately this is easy since we
        // already have normalized values. We'll just multiply them
        // by the stream dimensions to get real X and Y values rather
        // than the client window dimensions.
        short deltaX = static_cast<short>(event->dx * m_StreamWidth);
        short deltaY = static_cast<short>(event->dy * m_StreamHeight);
        if (deltaX != 0 || deltaY != 0) {
            LiSendMouseMoveEvent(deltaX, deltaY);
        }
    }

    // Start a drag timer when primary or secondary
    // fingers go down
    if (event->type == SDL_FINGERDOWN &&
            (fingerIndex == 0 || fingerIndex == 1)) {
        SDL_RemoveTimer(m_DragTimer);
        m_DragTimer = SDL_AddTimer(DRAG_ACTIVATION_DELAY,
                                   dragTimerCallback,
                                   this);
    }

    if (event->type == SDL_FINGERMOTION) {
        // Count the total cumulative dx/dy that the finger
        // has moved.
        m_CumulativeDelta[fingerIndex] += qAbs(event->x);
        m_CumulativeDelta[fingerIndex] += qAbs(event->y);

        // If it's outside the deadzone delta, cancel drags and taps
        if (m_CumulativeDelta[fingerIndex] > DEAD_ZONE_DELTA) {
            SDL_RemoveTimer(m_DragTimer);
            m_DragTimer = 0;

            // This effectively cancels the tap logic below
            m_TouchDownEvent[fingerIndex].timestamp = 0;
        }
    }

    if (event->type == SDL_FINGERUP) {
        // Cancel the drag timer on finger up
        SDL_RemoveTimer(m_DragTimer);
        m_DragTimer = 0;

        // Release any drag
        if (m_DragButton != 0) {
            LiSendMouseButtonEvent(BUTTON_ACTION_RELEASE, m_DragButton);
            m_DragButton = 0;
        }
        // 2 finger tap
        else if (event->timestamp - m_TouchDownEvent[1].timestamp < 250) {
            // Zero timestamp of the primary finger to ensure we won't
            // generate a left click if the primary finger comes up soon.
            m_TouchDownEvent[0].timestamp = 0;

            // Press down the right mouse button
            LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_RIGHT);

            // Queue a timer to release it in 100 ms
            SDL_RemoveTimer(m_RightButtonReleaseTimer);
            m_RightButtonReleaseTimer = SDL_AddTimer(TAP_BUTTON_RELEASE_DELAY,
                                                     releaseRightButtonTimerCallback,
                                                     nullptr);
        }
        // 1 finger tap
        else if (event->timestamp - m_TouchDownEvent[0].timestamp < 250) {
            // Press down the left mouse button
            LiSendMouseButtonEvent(BUTTON_ACTION_PRESS, BUTTON_LEFT);

            // Queue a timer to release it in 100 ms
            SDL_RemoveTimer(m_LeftButtonReleaseTimer);
            m_LeftButtonReleaseTimer = SDL_AddTimer(TAP_BUTTON_RELEASE_DELAY,
                                                    releaseLeftButtonTimerCallback,
                                                    nullptr);
        }
    }

    m_NumFingersDown = SDL_GetNumTouchFingers(event->touchId);

    if (event->type == SDL_FINGERDOWN) {      
        m_TouchDownEvent[fingerIndex] = *event;
        m_CumulativeDelta[fingerIndex] = 0;
    }
    else if (event->type == SDL_FINGERUP) {
        m_TouchDownEvent[fingerIndex] = {};
    }
}

int SdlInputHandler::getAttachedGamepadMask()
{
    int count;
    int mask;

    if (!m_MultiController) {
        // Player 1 is always present in non-MC mode
        return 0x1;
    }

    // TODO: Use SDL_GameControllerGetPlayerIndex() for accurate indexes?
    count = mask = 0;
    for (int i = 0; i < SDL_NumJoysticks(); i++) {
        if (SDL_IsGameController(i)) {
            mask |= (1 << count++);
        }
    }

    return mask;
}

void SdlInputHandler::raiseAllKeys()
{
    if (m_KeysDown.isEmpty()) {
        return;
    }

    SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                "Raising %d keys",
                m_KeysDown.count());

    for (auto keyDown : m_KeysDown) {
        LiSendKeyboardEvent(keyDown, KEY_ACTION_UP, 0);
    }

    m_KeysDown.clear();
}

QString SdlInputHandler::getUnmappedGamepads()
{
    QString ret;

    if (SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) != 0) {
        SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
                     "SDL_InitSubSystem(SDL_INIT_GAMECONTROLLER) failed: %s",
                     SDL_GetError());
    }

    MappingManager mappingManager;
    mappingManager.applyMappings();

    for (int i = 0; i < SDL_NumJoysticks(); i++) {
        if (!SDL_IsGameController(i)) {
            char guidStr[33];
            SDL_JoystickGetGUIDString(SDL_JoystickGetDeviceGUID(i),
                                      guidStr, sizeof(guidStr));
            const char* name = SDL_JoystickNameForIndex(i);
            SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                        "Unmapped joystick: %s %s",
                        name ? name : "<UNKNOWN>",
                        guidStr);
            SDL_Joystick* joy = SDL_JoystickOpen(i);
            if (joy != nullptr) {
                int numButtons = SDL_JoystickNumButtons(joy);
                int numHats = SDL_JoystickNumHats(joy);
                int numAxes = SDL_JoystickNumAxes(joy);

                SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION,
                            "Number of axes: %d | Number of buttons: %d | Number of hats: %d",
                            numAxes, numButtons, numHats);

                if ((numAxes >= 4 && numAxes <= 8) && numButtons >= 8 && numHats <= 1) {
                    SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                                "Joystick likely to be an unmapped game controller");
                    if (!ret.isEmpty()) {
                        ret += ", ";
                    }

                    ret += name;
                }

                SDL_JoystickClose(joy);
            }
            else {
                SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION,
                            "Unable to open joystick for query: %s",
                            SDL_GetError());
            }
        }
    }

    SDL_QuitSubSystem(SDL_INIT_GAMECONTROLLER);

    return ret;
}