Initializes the display if not already done by iboot/m1n1. Not expected
to change anything for disp0 but might be helful in bringing DP alt
mode for dispexp[0-7].
Signed-off-by: Janne Grunau <j@jannau.net>
Devicetrees with dart-disp0 will have it disabled to avoid breaking
scanout off the boot framebuffer when booting via m1n1 version which
does not lock dart-disp0.
Signed-off-by: Janne Grunau <j@jannau.net>
The AOP uses an 'EPIC' protocol similar to the one other coprocessor
firmware is using but not in the exact same version. Add code for
tracing the AOP calls and extend the aop.py experiment with the client
side of it. Include description of audio calls and some other calls
related to sensor discovery.
Furthermore, in experiments/aop.py, do some AOP audio setup. Once that
is done we can start streaming samples from the internal microphones by
making what AOP considers power state adjustment calls. That is, we
adjust the power state of a 'hpai' device, first to a 'pw1 ' stage,
then to 'pwrd' stage.
So, to see microphone samples, enter the AOP experiment shell first:
$ M1N1DEVICE=/dev/ttyACM0 experiments/aop.py
Within the shell, adjust the power state of 'hpai':
>>> aop_set_audio_pstate('hpai', 'pw1 ')
At that point /arm-io/admac-aop-audio powers up. In parallel to the AOP
shell, we can start tools/admac_stream.py on the just powered-up ADMAC
instance:
$ M1N1HEAP=0x10010000000 M1N1DEVICE=/dev/ttyACM1 tools/admac_stream.py \
--node admac-aop-audio --channel 1 -v | xxd -g 4 -c 12 -e
Returning back to the AOP shell, we can then set 'hpai' to 'pwrd' state
to kick off the streaming:
>>> aop_set_audio_pstate('hpai', 'pwrd')
By that point, we should see samples coming out on the ADMAC end. The
samples are 32-bit floats packed in groups of three in a frame, e.g.
00000000: ba7ac6a7 ba32d3c3 baa17ae2 ..z...2..z..
0000000c: 38ccea5f b99c1a37 ba0c4bb1 _..87....K..
00000018: 39d2354f 3964b5ff 39b209fb O5.9..d9...9
00000024: b96a1d1f 39c8503f 3958fc4f ..j.?P.9O.X9
00000030: b6b1f5ff 39c72b8f 39bbe017 .....+.9...9
0000003c: 3a912de5 36dd4f7f 37f1147f .-.:.O.6...7
This has been tested and will to some degree be specific to 2021 Macbook
Pro (t6000). Differences on other models TBD (at the very least the
number of microphones can be presumed different).
Signed-off-by: Martin Povišer <povik@protonmail.com>
We need to allocate a buffer for the AOP on the OSLog endpoint for it to
fully boot. Copy in a modified version of the general OSLog endpoint
driver to do that.
Signed-off-by: Martin Povišer <povik@protonmail.com>
In t6000 ADT, the AOP SRAM base is specified *including* the bus offset
where the bus offset isn't expected, so our decoding of it includes the
bus offset twice. Patch it.
Signed-off-by: Martin Povišer <povik@protonmail.com>
We need to adapt the prop-parsing logic to give precedence to path
matching over name matching, since otherwise the audio-* rule (which is
already in the list) catches (...)/aop-audio/audio-pdm2. We want that
to fall under *aop-audio* rule instead.
Signed-off-by: Martin Povišer <povik@protonmail.com>
The Reloadable parent doesn't have an __init__ method, so calling the
super may call at unexpected places in richer inheritance hierarchies.
Signed-off-by: Martin Povišer <povik@protonmail.com>
Image Signal Processor is a co-processor in charge of Facetime camera
in Apple laptops. This tracer is based on ISP found in M1 processor.
The ISP in M1 SoC exposes seven inter-process communication channels.
Using those channels Application Processor (AP) can perform a variety of
task in the ISP and viceversa. All channels seems to be bidirectional, with
unique exception of TERMINAL channel.
DART translation is used often to translate control structures passed
over IPC channels to IO virtual addresses.
How those channels are used is still unclear but tracer should allow us
to dive deep on high-level protocol to communicate with Facetime camera.
ISP exposes also some I2C peripheral and SPMI registers but I haven't
dive into their working or purpose.
Signed-off-by: Kellerman Rivero <krsloco@gmail.com>
DCP and disp0 need their bootloader iommu mappings maintained until
an OS driver can take over. DCP's mappings have to be kept
indefinitively since it's unknown if or how it can be restarted.
Bindings based on
https://lore.kernel.org/asahi/20220923123557.866972-1-thierry.reding@gmail.com
Signed-off-by: Janne Grunau <j@jannau.net>
This prevents older systems from resetting dart-disp0 on init when they
encounter device trees with DCP/disp nodes.
Signed-off-by: Janne Grunau <j@jannau.net>
0 is a valid and used device virtual address. Daart functions returning
device address can not use 0 to indicate errors.
Signed-off-by: Janne Grunau <j@jannau.net>
