Mirrors/m1n1
2
0
Fork 0
mirror of https://github.com/AsahiLinux/m1n1 synced 2025-02-17 06:08:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
1031 commits 15 branches 53 tags 10 MiB
Commit graph

570 commits

Author SHA1 Message Date
Janne Grunau
e90be797a8 m1n1.trace.gpio: Update register description based on the Linux driver 
Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:06:01 +09:00
Janne Grunau
9c80a69266 m1n1.hv: Use dynamic pin maps in trace_gpio.py 
Hardcoded pin maps do not make sense with additional HW support.
Allows tracing of a single pin in another tracing module, for example
for tracing the SPI cs pin.

Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:06:01 +09:00
Janne Grunau
5e8beca9fe experiments/dcp.py: Upload fb in 512k chunks for slow (v)UARTs 
Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:05:21 +09:00
Janne Grunau
f297decfb4 experiments/dcp.py: Use display size for frame buffers 
Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:05:21 +09:00
Janne Grunau
6a8016a8e3 experiments/dcp.py: set DVA offset from ADT 
This does not appear to be necessary. It worked on t8103 before and I
see no different behavior on t6001.

Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:05:21 +09:00
Janne Grunau
66f4d625b8 experiments/dcp.py: Use t8103/t600x specific code paths 
MMIO space differes between t8103 and t600x so the hardcoded RegMonitor
addresses make only sens on the former.
set_display_device difference is taken from macOS trace on t6001.

Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:05:21 +09:00
Janne Grunau
d1d93eb2b5 m1n1.fw.dcp: Add callbacks used by t600x-dcp 
Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:05:21 +09:00
Janne Grunau
7028f3e2d8 m1n1.fw.dcp: Zero dcpep's shared memeory 
Fixes a crash of DCP with experiments/dcp.py after chainloading m1n1 on
j314c.

Signed-off-by: Janne Grunau <j@jannau.net>
 2022-03-11 12:05:21 +09:00
Hector Martin
99124a41fe tools/chainload.py: Support chainloading raw binaries 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-03-10 00:30:15 +09:00
Hector Martin
123d1df1a7 kboot: Replace kboot_set_bootargs with kboot_set_chosen 
This allows setting arbitrary /chosen string props

Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-03-09 20:55:34 +09:00
Hector Martin
adb1cb943e proxy: Export smp_set_wfe_mode 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-03-08 00:02:06 +09:00
Janne Grunau
d76f3a6631 m1n1.hw.DART: coalesce continuos l2 ptes 
Signed-off-by: Janne Grunau <j@jannau.net>
 2022-02-24 23:55:46 +09:00
Janne Grunau
e1c5df5037 experiments/dart_dump.py: Use DART.from_adt() 
The label of the ADT node is easier to use. Uses the proper DART type on
t600x SoCs.

Signed-off-by: Janne Grunau <j@jannau.net>
 2022-02-24 23:55:46 +09:00
Janne Grunau
a57696366f hv/trace_dcp.py: Update to macOS 12.x API 
DCP API seems to be mostly unchanged from 12 beta to 12.2.

Signed-off-by: Janne Grunau <j@jannau.net>
 2022-02-24 23:55:46 +09:00
Janne Grunau
fb49d88d90 m1n1.fw.dcp.ipc: annotate swap_complete_intent_gated 
Signed-off-by: Janne Grunau <j@jannau.net>
 2022-02-24 23:55:46 +09:00
Sven Peter
53af416b07 hv.py: Add helper to break on symbols 
We already have breakpoints and symbols, let's make our life easier
by also allowing to break on symbols.

Signed-off-by: Sven Peter <sven@svenpeter.dev>
 2022-02-24 23:55:25 +09:00
Hector Martin
08b77c2b1b m1n1.adt: Handle underscores in properties as __ 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-21 15:31:31 +09:00
Hector Martin
5bf8c5ac83 m1n1.hv: Use p.mcc_hv_unmap_carveouts() 
Fixes random SErrors due to the guest issuing speculative instruction
fetches into TZ regions.

Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-21 15:30:25 +09:00
Hector Martin
50a9593034 mcc: Add mcc_hv_unmap_carveouts() and proxy op 
This is necessary to stop the guest from speculating into carveouts.

Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-21 15:30:21 +09:00
Hector Martin
a8a93a3b5f hv/trace_smc.py: Add GetKeyByIndex decoding 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-15 14:05:13 +09:00
Hector Martin
ec126bb16a experiments/smc.py: Turn into SMC key dumper 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-15 14:05:13 +09:00
Hector Martin
d381341865 m1n1.trace.asc: Add missing power control messages 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-15 14:05:13 +09:00
Hector Martin
45c3682f60 m1n1.fw.smc: Handle notifications 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-15 14:05:13 +09:00
Hector Martin
a0680a2678 m1n1.adt: Better parse PMU props 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-15 14:05:13 +09:00
Martin Povišer
41f0874f99 experiments/audio_capture.py: Demonstrate audio capture 
Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
78aa55f0bc experiments/speaker_amp.py: Revamp hardware setup 
Use register definitions where they are now available. Start from full
AUDIO_P reset and set NCO ourselves (instead of relying on iBoot
values).

Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
0d4c7af26b m1n1.hw.mca: Add MCA register definitions 
Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
90c4a1ae46 m1n1.hw.admac: Improve polling 
Make sure we read any reports before we start submitting new
descriptors. Also put sleep in busy-wait loop and make speaker_amp.py
exit once EOF is reached.

Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
9bd84dfbb9 experiments/speaker_amp.py: Drop 'polling console' 
Drop the 'polling console' code as there are now better ways to achieve
the same. (One can use USB_VUART for second proxy session, see 85ee2f24)

Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
532f260fae m1n1.hw.admac: Label burst size, buswidth registers 
Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
3a8ae74907 m1n1.hw.admac: Introduce RX channels 
Fill in register definitions and extend the driver code to introduce
support for RX channels. This involves change of channel numbering.

Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
590722b29d m1n1.hw.admac: Use stderr for debug prints 
Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:18:20 +09:00
Martin Povišer
64d8f9d1b3 m1n1.loadobjs: Add util for loading objects on target 
For those of us who can't write assembly but still need to run code on
the other side.

  >>> from m1n1.loadobjs import *
  >>> lp = LinkedProgram(u)
  >>> lp.debug_printf("hello from the other side (%d)\n", 42)
  TTY> hello from the other side (42)
  0x1f
  >>> lp.load_obj("build/test.o")
  >>> lp.test()
  TTY> hello from loaded object
  0x19
  >>> lp.clear_objs()

Signed-off-by: Martin Povišer <povik@protonmail.com>
 2022-02-08 14:14:38 +09:00
Hector Martin
0d35eb3da7 m1n1.proxyutils: Wrap ADT base to 64 bits 
This works around a wraparound issue when the virt base ends up causing
the ADT address to go negative, when on 12.1+ using a dummy virt base.

Fixes: #155
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-02-06 20:49:54 +09:00
Mikhail Gusarov
88874936c6 proxyclient: utils.py: add ehexdump() 
ehexdump is similar to chexdump, and uses CP437 control characters
and Braille to improve eyeballability of character output.

Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
 2022-01-26 15:39:23 +09:00
Sven Peter
ccf4b20a1d proxy: add nvme_{read,flush} 
Signed-off-by: Sven Peter <sven@svenpeter.dev>
 2022-01-26 15:38:40 +09:00
Sven Peter
f44d5db4fa proxyclient/asc: s/Mgmt_StartSyslog/Mgmt_SetAPPower/ 
Signed-off-by: Sven Peter <sven@svenpeter.dev>
 2022-01-26 15:38:40 +09:00
Sven Peter
6816c151bb proxyclient/epic: Add support for SubHeader.version = 3 
Signed-off-by: Sven Peter <sven@svenpeter.dev>
 2022-01-19 03:24:20 +09:00
Hector Martin
e2b87b695f tools/smccli.py: Shut down cleanly, increase verbosity 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:22:33 +09:00
Hector Martin
434a3b6c78 hv/trace_smc.py: Support RW ops 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:22:16 +09:00
Hector Martin
07c695926d hv/trace_dcp.py: Fix typo 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:21:55 +09:00
Hector Martin
ce2f705b16 m1n1.trace.asc: Handle prealloc'd syslog buffers 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:21:30 +09:00
Hector Martin
293d78fd7f m1n1.hw.asc: Add verbose flag 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:21:15 +09:00
Hector Martin
a79200ef1e m1n1.fw.smc: Many improvements 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:21:04 +09:00
Hector Martin
c7d42837e4 m1n1.fw.asc.mgmt: Fix the IOP/AP power state stuff 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:19:48 +09:00
Hector Martin
db0eaa86ca experiments/dcp_iboot.py: Clean up after shell 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:19:08 +09:00
Hector Martin
9cdf2b5d06 experiments/dcp_iboot.py: Do not dump DART 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:18:55 +09:00
Hector Martin
e468e08603 m1n1.fw.asc.{crashlog,syslog}: Do not ack prealloced bufs 
This is wrong and causes IOP crashes due to unacked crashlog msgs.

Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:18:18 +09:00
Hector Martin
bacb19b301 m1n1.fw.asc: Make DVA_OFFSET dynamic 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-19 03:16:12 +09:00
Hector Martin
f98723bb81 m1n1.trace.dart: Prime register cache on startup 
Signed-off-by: Hector Martin <marcan@marcan.st>
 2022-01-17 04:42:00 +09:00