'etc_group' resource stores 'gid' as integer but the 'where' method
compares 'gid' as string.
By this fix, the 'where' method always converts the stored data to string
when comparing. And it can also look for groups without members.
Signed-off-by: ERAMOTO Masaya <eramoto.masaya@jp.fujitsu.com>
Curl doesn't distinguish between them so need to use the sum of both as
the overall timeout.
fixes#2288
Signed-off-by: Brett Delle Grazie <brett.dellegrazie@gmail.com>
The `toml` gem has a very strict version dependency on an old version
of parslet. This change switches us to use `tomlrb` instead which has
no direct dependencies. This will allow us to bump up to a later version
of parslet that has better error handling and insight into parser errors.
Signed-off-by: Adam Leff <adam@leff.co>
* Add non-halting exception support to resources
This adds two `Inspec::Exceptions` that can be used within resources to
either skip or fail a test without halting execution.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
`curl` expects a valid header per RFC 2616 when using the
`-H`/`--header` option. RFC 2616 declares header field/values
should be separated using a colon (`:`):
https://tools.ietf.org/html/rfc2616#section-4.2
Signed-off-by: Seth Chisamore <schisamo@chef.io>
* Added CRAN resource to check R modules
control 'cran-1' do
impact 1.0
desc '
Ensure R module DBI is installed.
'
describe cpan('DBI') do
it { should be_installed }
its('version') { should cmp >= '3.0' }
end
end
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* cran resource: made lint happy, added negative unit test, removed unused arg perl_lib_path
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* Added CPAN resource to check Perl modules
control 'cpan-1' do
impact 1.0
desc '
Ensure Perl modules DBI and DBD::Pg are installed.
'
describe cpan('DBI') do
it { should be_installed }
end
describe cpan('DBD::Pg') do
it { should be_installed }
its('version') { should cmp >= '3.0' }
end
end
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* cpan resource: fixed unit test for non-installed module
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* new resource: elasticsearch resource, test cluster/node state
This is a new resource for testing an Elasticsearch cluster. It operates
by fetching the `_nodes` endpoint from a given Elasticsearch node and
collects data about each node in a cluster, even if there's only a
single node.
This work is based on inspiration from an initial PR #1956 submitted by
@rx294.
Signed-off-by: Rony Xavier <rx294@nyu.edu>
Signed-off-by: Aaron Lippold <lippold@gmail.com>
Signed-off-by: Adam Leff <adam@leff.co>
* Reduce mock data on non-default tests
Signed-off-by: Adam Leff <adam@leff.co>
* Adds alias for 'ListDirectory' permission
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Works with Ruby array of permissions as long as possible
Converts to PowerShell array just before use.
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Abstracts user-provided permissions to router method
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds FullControl as a specifiable permission
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds specific permission 'modify'
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Fixes#1743
Limits Windows' broad "read" permission to if it can read all of the
above, instead of just the first:
- File contents
- File attributes
- File extended attributes
- File permissions
This better aligns with how Windows names the permissions.
'read' -> Read instead of 'read' -> ReadData
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* 'Execute' Windows ACL has alias of 'Traverse'
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds 'Delete' permission
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds `should allow('perm').by_user('me')` matcher
Provides hooks for later use with Windows ACL matching
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds remaining Windows ACL hooks
Skips ReadAndExecute on intentionally since it just aliases the combo of
2 permissions into one new one.
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* [Rubocop] Reduces ABC / Cyclomatic complexity
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Reduces global scope with `allows()` -> `be_allowed()`
RSpec inferred matchers work nicely here. This changes the `by_user()`
and `by()` chained matchers to just be an options hash on the underlying
`allowed?()` method.
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Fixes integration tests with rename `allows()` -> `be_allowed()`
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Uses netstat to detect open ports on AIX
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
* Adds unit tests for AIX port resource
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
* Updated so that the credentials file is only interogated if it exists
Fixes#39
Signed-off-by: Russell Seymour <russell.seymour@turtlesystems.co.uk>
* Made change to set credentials to nil as requested
Signed-off-by: Russell Seymour <russell.seymour@turtlesystems.co.uk>
Some object methods have been deprecated in v0.11.0 of the arm sdks.
This commit fixes the get_resources method by using the new resources
object instance method. We are also updating the Gemfile accordingly.
Signed-off-by: sanabriad <sanabria.d@gmail.com>
* Move raise condition for host into enabled method
This is related to #1205. This will fix the ssl resource for now until
we redo the exceptions. Still looking around the code and need to build
some unit tests for the ssl resource.
My fix here is to move the raise condition till later in the flow,
specifically the enabled? method. This lets the raise get caught
accordingly without killing the other tests.
Signed-off-by: Jared Quick <jquick@chef.io>
* Remove authors from ssl resource test
Signed-off-by: Jared Quick <jquick@chef.io>
This change enhances the processes resource to support the busybox
ps command which is common on Alpine, for example. The way we
map ps fields to the structs needed by FilterTable have also been
refactored to be more flexible so we can support multiple formats
in the future.
Also, the processes resource now allows the grep argument to be optional
thus allowing a user to query all resources without passing in a
match-all regex.
Signed-off-by: Adam Leff <adam@leff.co>
* Add nil check for sshd config file
This fixes#1778. There was a issue where if the user did not have read
permissions on /etc/ssh/sshd_config it would error out on the empty?
check. The fix here is to also look for nil on the file content. Along
with this I refactored the inspec file empty? check as it does not exist
and was also erroring during my testing.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add emptyfile test object and refactor tests
Signed-off-by: Jared Quick <jquick@chef.io>
Currently, the http resource always executes locally, even when scanning
a remote machine with `--target` which leads to undesireable behavior.
This change adds the ability to remotely execute tests with curl. This
behavior is currently opt-in with the `enable_remote_worker` flag, but
will become the default behavior in InSpec 2.0. Deprecation warnings
are emitted if the user is scanning a remote target but has not opted
in to the new behavior.
Signed-off-by: Adam Leff <adam@leff.co>
* Added output for port/protocol for host resource.
Signed-off-by: Jared Quick <jquick@chef.io>
* refactor with explicit return
This fixes#2085. Port and protocol are now shown in output of the host
resource if defined.
Signed-off-by: Jared Quick <jquick@chef.io>
* refactor with string building return
Signed-off-by: Jared Quick <jquick@chef.io>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resourec - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource firewalld
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Modifications to new resource - firewalld
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Changing firewalld_command method to prepend the command with 'firewall-cmd' to reduce code reuse.
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Modifications made
* installed? method now tells by checking if firewall-cmd is a command on the system
* The firewalld_command method now strips the stdout of the return
* added another test for testing multiple active zones
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Fixing rake lint issue
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Fixing match and returning boolean for seeing if firewalld is running
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Fixing lint issues
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Empty commit to rerun. Accidentally updated branch.
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Rerunning test, accidentally updated branch. needs sign off commit
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Add hotfix resource for Windows
Signed-off-by: Matt Ray <matthewhray@gmail.com>
* Renamed hotfix to windows_hotfix
Added additional unit test checking for KB that is not present on a box
Signed-off-by: Matt Ray <matthewhray@gmail.com>
* Integration test to spot-check for hotfixes
Queries the Windows operating system via Powershell for a list of all
installed hotfixes and spot-checks every 10th one with the
windows_hotfix resource. Checking hundreds is time-consuming. Also
checks to ensure a non-installed hotfix is not present.
Signed-off-by: Matt Ray <matthewhray@gmail.com>
When using the `query` method in the `postgres_session` resource, if
the query fails, the `query` method attempts to call `skip_resource`
with an error message. Not only does the `skip_resource` not properly
work, but it also returns a `String` object back to the test which is
probably going to try and call the `output` method on it to run the test.
This results in an error like this:
```
Can't read
∅ undefined method `output' for "output":String
```
This change returns the full psql output as a Lines object to the
user, including stderr, so they can at least get the error in their
test output and avoids undefined method errors.
Signed-off-by: Adam Leff <adam@leff.co>
This modifies the enabled check for the `service` resource to use the
service's config file instead of `initctl show-config`.
`initctl show-config` does not accurately show the state of a service if
that service's config file is modified while the service is running.
This fixes#1834.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
Users cannot query for registry keys that have periods in them because of
how rspec-its works. This change enables Array-style syntax for the
registry_key resource so users can use that as a workaround.
Signed-off-by: Adam Leff <adam@leff.co>
The auditd_rules resource has been replaced by the auditd resource.
We are planning on removing the auditd_rules resource in InSpec 2.0.
This change will provide a warning to any user using the old resource.
Signed-off-by: Adam Leff <adam@leff.co>
* Added auditd resource and documentation.
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Added unit tests for auditd resource and updated auditd_rules_test to match new entries in auditctl
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Removed all legacy code for audit < 2.3. Removed parens to create consistency.
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated method names and removed unnecessary content based on review
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Add wildcard/multiple server support to nginx_conf
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* separate the merge function for maps in nginx_conf
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* package resource: assume a default Homebrew path
Homebrew's `brew` script is installed to /usr/local/bin by default which
is usually not in a non-interactive PATH. We will now first check to see
if `brew` is in PATH, and if not, assume a default of `/usr/local/bin/brew`
Signed-off-by: Adam Leff <adam@leff.co>
* Ignore linked container names when parsing docker containers
If a container is linked to another container, the normal `docker ps` output
does not include this information. However, when pulling the `.Names` field
with `docker ps --format`, the linked container is listed in the name. This
is confusing for users trying to use InSpec to audit a container.
This change strips any linked container names from the actual container name.
Signed-off-by: Adam Leff <adam@leff.co>
* Linked container names aren't guaranteed to be last depending on how they were linked
Signed-off-by: Adam Leff <adam@leff.co>
* Adding support for fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to docs of new resource etc_fstab
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Modifications to new resource etc_fstab
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* wip: extend nginx_conf for http+servers+locations
... well `http` entries really, but we couldnt just call it `https`.
the goal is to `nginx_conf.http` / `nginx_conf.servers` / `nginx_conf.locations` and then also have these calls cascaded down to simplify the access to these fields. the current pattern is rather tedious since we need to check for nil everywhere.
* add test for new nginx accessors
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* add docs for nginx-conf
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* fix all incorrect NGINX spellings in docs
* prevent edge-cases where nginx params are nil
for location, http, and servers
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* more descriptive to_s for nginx servers
as suggested by @adamleff, thank you!
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* add more descriptive to_s for nginx location
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* Modify linux regular expression to handle process names with spaces
Signed-off-by: Chad Scott <cscott@chadikins.com>
* Add mocks, tests, etc.
Signed-off-by: Chad Scott <cscott@chadikins.com>
* Provisioner script to setup resource tests for setgid/setuid/sticky bit tests. This appears to be the correct mechanism per docker_run, but I don't see any other provisioner scripts, so I suspect there is a different Chef-internal mechanism at play here.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* TDD Red for setgid/setuid/sticky File matchers
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add documentation for file resource sgid, sticky, and suid matchers
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add matchers to File for setgid, setuid, and sticky by aliasing existing predicates; TDD green
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Rubocop prefers alias to alias_method.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Lint before pushing, of course
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Correct spelling of setgid and setuid matchers in docs
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add be_setgid, be_setuid, be_sticky matcher integration tests for File.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Revert "Provisioner script to setup resource tests for setgid/setuid/sticky bit tests. This appears to be the correct mechanism per docker_run, but I don't see any other provisioner scripts, so I suspect there is a different Chef-internal mechanism at play here."
This reverts commit 42e672f3b1.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Revert "TDD Red for setgid/setuid/sticky File matchers"
This reverts commit a4f891fc7e.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add support for XML files
Signed-off-by: Morley, Jonathan <jmorley@cvent.com>
* Use REXML instead of nokogiri
Signed-off-by: Morley, Jonathan <jmorley@cvent.com>
* port resource: support ss instead of netstat
`netstat` is officially deprecated and is replaced with `ss`. This PR
changes the port resource to use `ss` if it's available on the target
system.
Signed-off-by: Adam Leff <adam@leff.co>
* Disable Metrics/ClassLength cop on the LinuxPorts class
Signed-off-by: Adam Leff <adam@leff.co>
* Update pip resource for #516 allow user to set path to pip executable
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* support virtualenv path, pip file exec and better logic
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* add tests for the change to the pip path and resource
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* tests are case sensitive, although command line is not
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* use a path verification method instead of a class method
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* use guard clauses instead of conditionals
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* change the control flow to return nil when commands are not available
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* fix the return values when custom pip path is not valid
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* Refactor pip path detection to fix unit tests
Signed-off-by: Adam Leff <adam@leff.co>
* Support mixed-case group entries
The `group` resource downcased the input parameter unless the target
was a Windows node. However, it's completely legitimate for a Unix-y
node to have mixed case group and passwd entries.
This change does have the potential to break people that did not carefully
match their case when searching for a group, but we're currently blocking
people from using the group resource properly if they have mixed-case
entries.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix unit tests
Signed-off-by: Adam Leff <adam@leff.co>
Currently, if you check two properties of a http resource, such as
status and body, two different http requests are made to the server.
However, the response is already stored in an instance variable, so this
change just checks to see if a response is already available and uses it
rather than making another http request.
Signed-off-by: Mark Harrison <mark@mivok.net>
* Added line to fix bug when no key in file rule and updated test to validate bug fix
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated to consider corner case
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Added aide_conf resource and subsequent files
* Updated to match on all selection lines
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Changed to use CommentParser and fixed typo
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Fix typo in test file
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated to address PR feedback
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* check the proper field for dpkg installation state fixes#2006
Signed-off-by: Mathieu Sauve-Frankel <msf@kisoku.net>
* Properly handle held packages on dpkg-flavored OS
InSpec was looking at the wrong field in `dpkg -s` output to determine
whether a package was installed or not. An installed, held package was
incorrectly reported as uninstalled.
This adds the proper unit tests and also adds a `be_held` matcher.
Thanks to @kisoku for the initial work in #2007.
Signed-off-by: Adam Leff <adam@leff.co>
With last weeks tag fix, `ourorg/container` ended up having its `repo` reported as `container`.
With this it'll be `ourorg/container` again.
Signed-off-by: Stephan Renatus <srenatus@chef.io>
* Change host resource to use getent ahosts on Linux
In InSpec 1.31, we changed the `host` resource to use `dig` instead of `getent
hosts` for name resolution because `getent hosts` does not return all entries
(only the first v6 entry if it exists, then the first v4 entry) and we wanted to
keep the Darwin and Linux implementation as close as possible. Unfortunately,
this affected users' ability to do resolution checks for entried stored in their
/etc/hosts file.
This change goes back to using `getent` for Linux and changes to `getent ahosts`
which returns both v4 and v6 records. Additionally, the Darwin provider's dig
implementation was reordered to return v4 addresses before v6 addresses to be
consistent with how `getent ahosts` returns records.
Signed-off-by: Adam Leff <adam@leff.co>
* Update unit tests for resolve_with_getent with proper output
Signed-off-by: Adam Leff <adam@leff.co>
The logic used to determine whether a viable netcat binary exists is wrong and
prevents Linux hosts from doing TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
CoreOS is considered a member of the Linux family, and the `host` resource tries
to use `nc` on Linux hosts to test TCP reachability. Unfortunately, `nc` is not
available on CoreOS, but `ncat` is.
This change attempts to use `nc` first, then `ncat` if it's available.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix host resolution on Darwin, use dig wherever possible
The `host` and `dig` commands do not return non-zero if a query returns NXDOMAIN
or NOERROR, but the DarwinHostProvider was expecting it when deciding whether to
fall back to IPv4 if a IPv6 query failed. Therefore, the `host` resource would
not function properly when resolving hostnames on Darwin. The logic has been
changed to use `dig` short output and query for both v6 and v4 addresses.
Additionally, the LinuxHostProvider has been modified to prefer `dig` if it's
available to keep behavior similar between Darwin and Linux whenever possible.
This has the added benefit of providing v6 and v4 resolution if possible where
`getent hosts` only returns v6 if v6 records exist.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix up methods, add command mock, do string matching in ruby instead of command
Fixes#1643Fixes#1673
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* fixed a small courner case in the error detection - error: vs error
fixed resource to use 'shellwords' module to escape the query
requested chances in method architecture for testing
added unit tests
Fixes: #1814
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* updated resource and tests with requested review changes
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* removed unneeded call to `escaped_query` in the `create_sql_cmd`.
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* removed license info
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* Remove any "All Rights Reserved" references
InSpec is licensed and released under the Apache 2.0 license. This
change removes all reference to legacy code files that still had
any Copyright or License lines referring to "All Rights Reserved".
Signed-off-by: Adam Leff <adam@leff.co>
* fix functional tests
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
The resource itself only offers contents and params right now. It resolved
all include calls it can find and creates the aggregated config object.
This is limited in functionality. One last (set of) PR(s) is needed to
add an interface that makes querying this config file easier. It is due
to the file's inherent complexity that I want to explore which methods
are needed to be effective. In the meantime, this resource offers accessors
to the underlying data that are stable.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* make postgres resource working in mock runner (for inspec check)
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* keep nil for empty states
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* showing how to shellout in docs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* adding basic example
Signed-off-by: Richard Shade <rshade@rightscale.com>
* cleanup
Signed-off-by: Richard Shade <rshade@rightscale.com>
* adding in mysql socket, as this doesn't work with non-default installs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* updating per peer review to make socket not a req, and adding port
Signed-off-by: Richard Shade <rshade@rightscale.com>
* updating docs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* Fix to_s on directory resource
The `to_s` method on the `directory` resource is not defined
in the correct class, leading `directory` resources to be printed
as the parent resource (`file`) instead.
Signed-off-by: Adam Leff <adam@leff.co>
* Directory existence should check to see if it's a directory
Signed-off-by: Adam Leff <adam@leff.co>
* Adding toml resource
This adds a `toml` resource that inherits from the json resource and
behaves the same way as the JSON and YAML resources.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
* s/package/service/ on service unit test descriptions
Signed-off-by: Kristian Vlaardingerbroek <kvlaardingerbroek@schubergphilis.com>
* Add support for CoreOS to the service resource
Signed-off-by: Kristian Vlaardingerbroek <kvlaardingerbroek@schubergphilis.com>
* Remove some apparently unused test setup to remove some warnings.
* Initialize some instance variables before use to silence warnings.
* Remove an unused variable to remove a warning.
* Remove some indirection.
* Silence logger during tests.
* Check if an instance variable was defined before referencing to remove a warning.
* Define duplicated constant once in root rakefile.
* Initialize an instance variable to remove a warning.
* Remove PROJECT_DIR to reduce coupling.
Signed-off-by: Pete Higgins <pete@peterhiggins.org>
* Add TCP reachability support on Linux for host resource
This enhances the `host` resource on Linux targets by using netcat
(if installed) to perform TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* documentation updates
Signed-off-by: Adam Leff <adam@leff.co>
* Appease rubocop
Signed-off-by: Adam Leff <adam@leff.co>
Unsupported operating systems AND the mockloader when using inspec analysis tools may lead to powershell being called with the command being `nil`, because the resource skips during the initialize phase. Instead, propagate an empty string so that `command` has a valid input and then skip the resource.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
The `interface` resource currently refers to methods that don't
yet exist. Fixing the docs for now and will add the features
later.
Signed-off-by: Adam Leff <adam@leff.co>
Postgres configuration doesnt always include absolute paths. When using relative paths it will fail!
Also: We treat the include as either a string or an array; when the first condition succeeds and you get a string and the second fails you get a array => ruby tries to add a string with an array and fails. This is now fixed as well.
Fixes: https://github.com/chef/inspec/issues/1780
Fixes: https://github.com/chef/inspec/issues/1738
Signed-off-by: Aaron Lippold <lippold@gmail.com>
The gem resource used to determine if a gem is installed based on the exit
status of the `gem` command, however that command will return zero
if the package was found or not. This patch checks to ensure that the
`gem list` command actually includes the gem name or is empty to
determine if the gem is in fact installed.
If the gem command returns something other than a `0` exit code, then
it'll skip the resource.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
This adds supports for connecting to MS SQL instances using Window
authentication rather than SQL authentication. By leaving either the
user or password parameters blank causes the sqlcmd to leave off the -U
and -P params. This will cause sqlcmd to authenticate as the current
Windows user.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Switched the oracle_session resource to take an option hash and allow
for configuring hostname, DB_SID, and sqlplus binary path.
Added unit tests.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
This adds an oracle_session resource similar to the existing resource
for MySQL and MSSQL. It assumes the sqlplus tool is installed and in
the path of the user InSpec connects as.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
The file resource's `#content` method will return nil if the file
cannot be read for permissions issues. If you try to run a profile
that uses the `xinetd` resource without sudo privileges, InSpec
would try to call `#empty` on nil.
This change fixes this issue by checking for nil before checking
for emptiness.
Signed-off-by: Adam Leff <adam@leff.co>
Even though I couldn't find any docs around include_dir accepting anything other than a string I left the existing functionality alone.
This forces include_dir to check multiple directories as well as single string directories for additional conf files.
Signed-off-by: Elliott Davis <edavis@chef.io>
We needed to be able to run inspec against endpoints with self signed certificates and this was the quickest way for us to get there.
Signed-off-by: Elizabeth Uselton <elizabeth.uselton@gmail.com>
RubyGems on windows comes with a batch file that wraps the `gem` command
so it executes correctly. This change uses that batch file for windows
for our `gem` resource, and also properly handles when we receive no output
from the command.
Signed-off-by: Adam Leff <adam@leff.co>
SSL resource now adds the servername option in client hello,
utilizing the the great work of @adamcaudill to support
SNI in sslshake [1]
[1] https://github.com/arlimus/sslshake/pull/5
Signed-off-by: Christoph Kappel <kappel.christoph@gmail.com>
If a repo did not exist, running matchers against it (such as `exist`)
were failing due to a bug in `#to_s` when fetching the repo name. The
`info` method would return nil and we'd still try to treat it as a hash.
This change ensures that info is always a hash, possibly empty if the
repo doesn't exist, and uses the repo name provided by the user rather
than shortening it to be consistent with our other resources which don't
manipulate the user input in the formatter.
Also added a method_missing to allow users to interrogate repo options,
such as baseurl or gpgcheck.
Signed-off-by: Adam Leff <adam@leff.co>
Netstat will sometimes output an IPv6 address that is not
formatted correctly; the address is either truncated or uses
or implies the `::` shorthand notation twice. This yields an
invalid IPv6 address and causes IPAddr.new to choke.
This change guards against invalid IP addresses and ensures they
do not end up in the port resource's entries list.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to access array values via the `json` resource:
```
describe json('/tmp/test.json') do
its(['array',0]) { should eq "zero" }
end
```
... the resulting data would be an array of the size of the original array
with all the values replaced with nils:
```
expected: "zero"
got: [nil, nil, nil]
```
This was due to a bug in the ObjectTraverser mixin that mapped array values
back through `extract_value` rather than properly handling the passed-in
key(s). This worked fine for the specific data format created by the `csv`
resource but did not work `json` or any other resource that subclassed the
`JsonConfig` resource.
This change fixes the logic when dealing with an array when it's encountered,
and fixes up the `csv` resource with its own `value` method.
This change also adds tests for ObjectTraverser.
Signed-off-by: Adam Leff <adam@leff.co>
As raised in #1526, adding an additional example showing how
a user can use the `where` accessor to find commands matching
a pattern and write a test using the results.
Signed-off-by: Adam Leff <adam@leff.co>
On Linux, netstat may show a tcp6/udp6 protocol line but include a
v4 address. This happens with AF_INET6 sockets that can accept
both v4 and v6 traffic. The port check was not properly handling
this situation and trying to pass a v4 address to URI bracketed as
if it was a v6 address.
Signed-off-by: Adam Leff <adam@leff.co>
The following new resources have been added; however, they
presently only support FreeBSD and similar.
* `zfs_dataset`: tests if a named ZFS dataset is present
and/or has certain properties.
* `zfs_pool`: tests if a named ZFS pool is present and/or
has certain properties.
Additionally, the `mount` resource has been reworked to
include support for FreeBSD; while the existing class
was renamed to LinuxMountParser.
Unit-tests were added for all of the above.
Signed-off-by: Joseph Benden <joe@benden.us>
The crontab resource parses a particular user's crontab file into
individual entries and allows the user to assert information about
each entry as needed.
Signed-off-by: Adam Leff <adam@leff.co>
This pull request adds a packages resource so that we can check for pattern matches against all the packages on a system. This initially implements only dpkg support for debian-based platforms so we can cover this use case:
```ruby
describe packages(/^xserver-xorg.*/) do
its("list") { should be_empty }
end
```
This uses FilterTable so we can supply additional queries, too.
```ruby
describe packages(/vi.+/).where { status != 'installed' } do
its('statuses') { should be_empty }
end
```
Users can specify the name as a string or a regular expression. If it is a string, we will escape it and convert it to a regular expression to use in matching against the full returned list of packages. If it is a regular expression, we take that as is and use it to filter the results.
While some package management systems such as `dpkg` can take a shell glob argument to filter their results, we eschew this and require a regular expression to match multiple package names because we will need this to work across other platforms in the future. This means that the following:
```ruby
packages("vim")
```
Will return *all* the "vim" packages on the system. The `packages` resource will take `"vim"`, turn it into `/vim/`, and greedily match anything with "vim" in the name. To match only a single package named `vim`, it needs to be an anchored regular expression.
```ruby
packages(/^vim$/)
```
Signed-off-by: Joshua Timberman <joshua@chef.io>
Use entries instead of list
Added a few more tests and non installed package in output
Signed-off-by: Alex Pop <apop@chef.io>
fix lint
Signed-off-by: Alex Pop <apop@chef.io>
Signed-off-by: Joshua Timberman <joshua@chef.io>
