* Remove some apparently unused test setup to remove some warnings.
* Initialize some instance variables before use to silence warnings.
* Remove an unused variable to remove a warning.
* Remove some indirection.
* Silence logger during tests.
* Check if an instance variable was defined before referencing to remove a warning.
* Define duplicated constant once in root rakefile.
* Initialize an instance variable to remove a warning.
* Remove PROJECT_DIR to reduce coupling.
Signed-off-by: Pete Higgins <pete@peterhiggins.org>
* Add TCP reachability support on Linux for host resource
This enhances the `host` resource on Linux targets by using netcat
(if installed) to perform TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* documentation updates
Signed-off-by: Adam Leff <adam@leff.co>
* Appease rubocop
Signed-off-by: Adam Leff <adam@leff.co>
Unsupported operating systems AND the mockloader when using inspec analysis tools may lead to powershell being called with the command being `nil`, because the resource skips during the initialize phase. Instead, propagate an empty string so that `command` has a valid input and then skip the resource.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
The `interface` resource currently refers to methods that don't
yet exist. Fixing the docs for now and will add the features
later.
Signed-off-by: Adam Leff <adam@leff.co>
Postgres configuration doesnt always include absolute paths. When using relative paths it will fail!
Also: We treat the include as either a string or an array; when the first condition succeeds and you get a string and the second fails you get a array => ruby tries to add a string with an array and fails. This is now fixed as well.
Fixes: https://github.com/chef/inspec/issues/1780
Fixes: https://github.com/chef/inspec/issues/1738
Signed-off-by: Aaron Lippold <lippold@gmail.com>
The gem resource used to determine if a gem is installed based on the exit
status of the `gem` command, however that command will return zero
if the package was found or not. This patch checks to ensure that the
`gem list` command actually includes the gem name or is empty to
determine if the gem is in fact installed.
If the gem command returns something other than a `0` exit code, then
it'll skip the resource.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
This adds supports for connecting to MS SQL instances using Window
authentication rather than SQL authentication. By leaving either the
user or password parameters blank causes the sqlcmd to leave off the -U
and -P params. This will cause sqlcmd to authenticate as the current
Windows user.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Switched the oracle_session resource to take an option hash and allow
for configuring hostname, DB_SID, and sqlplus binary path.
Added unit tests.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
This adds an oracle_session resource similar to the existing resource
for MySQL and MSSQL. It assumes the sqlplus tool is installed and in
the path of the user InSpec connects as.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
The file resource's `#content` method will return nil if the file
cannot be read for permissions issues. If you try to run a profile
that uses the `xinetd` resource without sudo privileges, InSpec
would try to call `#empty` on nil.
This change fixes this issue by checking for nil before checking
for emptiness.
Signed-off-by: Adam Leff <adam@leff.co>
Even though I couldn't find any docs around include_dir accepting anything other than a string I left the existing functionality alone.
This forces include_dir to check multiple directories as well as single string directories for additional conf files.
Signed-off-by: Elliott Davis <edavis@chef.io>
We needed to be able to run inspec against endpoints with self signed certificates and this was the quickest way for us to get there.
Signed-off-by: Elizabeth Uselton <elizabeth.uselton@gmail.com>
RubyGems on windows comes with a batch file that wraps the `gem` command
so it executes correctly. This change uses that batch file for windows
for our `gem` resource, and also properly handles when we receive no output
from the command.
Signed-off-by: Adam Leff <adam@leff.co>
SSL resource now adds the servername option in client hello,
utilizing the the great work of @adamcaudill to support
SNI in sslshake [1]
[1] https://github.com/arlimus/sslshake/pull/5
Signed-off-by: Christoph Kappel <kappel.christoph@gmail.com>
If a repo did not exist, running matchers against it (such as `exist`)
were failing due to a bug in `#to_s` when fetching the repo name. The
`info` method would return nil and we'd still try to treat it as a hash.
This change ensures that info is always a hash, possibly empty if the
repo doesn't exist, and uses the repo name provided by the user rather
than shortening it to be consistent with our other resources which don't
manipulate the user input in the formatter.
Also added a method_missing to allow users to interrogate repo options,
such as baseurl or gpgcheck.
Signed-off-by: Adam Leff <adam@leff.co>
Netstat will sometimes output an IPv6 address that is not
formatted correctly; the address is either truncated or uses
or implies the `::` shorthand notation twice. This yields an
invalid IPv6 address and causes IPAddr.new to choke.
This change guards against invalid IP addresses and ensures they
do not end up in the port resource's entries list.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to access array values via the `json` resource:
```
describe json('/tmp/test.json') do
its(['array',0]) { should eq "zero" }
end
```
... the resulting data would be an array of the size of the original array
with all the values replaced with nils:
```
expected: "zero"
got: [nil, nil, nil]
```
This was due to a bug in the ObjectTraverser mixin that mapped array values
back through `extract_value` rather than properly handling the passed-in
key(s). This worked fine for the specific data format created by the `csv`
resource but did not work `json` or any other resource that subclassed the
`JsonConfig` resource.
This change fixes the logic when dealing with an array when it's encountered,
and fixes up the `csv` resource with its own `value` method.
This change also adds tests for ObjectTraverser.
Signed-off-by: Adam Leff <adam@leff.co>
As raised in #1526, adding an additional example showing how
a user can use the `where` accessor to find commands matching
a pattern and write a test using the results.
Signed-off-by: Adam Leff <adam@leff.co>
On Linux, netstat may show a tcp6/udp6 protocol line but include a
v4 address. This happens with AF_INET6 sockets that can accept
both v4 and v6 traffic. The port check was not properly handling
this situation and trying to pass a v4 address to URI bracketed as
if it was a v6 address.
Signed-off-by: Adam Leff <adam@leff.co>
The following new resources have been added; however, they
presently only support FreeBSD and similar.
* `zfs_dataset`: tests if a named ZFS dataset is present
and/or has certain properties.
* `zfs_pool`: tests if a named ZFS pool is present and/or
has certain properties.
Additionally, the `mount` resource has been reworked to
include support for FreeBSD; while the existing class
was renamed to LinuxMountParser.
Unit-tests were added for all of the above.
Signed-off-by: Joseph Benden <joe@benden.us>
The crontab resource parses a particular user's crontab file into
individual entries and allows the user to assert information about
each entry as needed.
Signed-off-by: Adam Leff <adam@leff.co>
This pull request adds a packages resource so that we can check for pattern matches against all the packages on a system. This initially implements only dpkg support for debian-based platforms so we can cover this use case:
```ruby
describe packages(/^xserver-xorg.*/) do
its("list") { should be_empty }
end
```
This uses FilterTable so we can supply additional queries, too.
```ruby
describe packages(/vi.+/).where { status != 'installed' } do
its('statuses') { should be_empty }
end
```
Users can specify the name as a string or a regular expression. If it is a string, we will escape it and convert it to a regular expression to use in matching against the full returned list of packages. If it is a regular expression, we take that as is and use it to filter the results.
While some package management systems such as `dpkg` can take a shell glob argument to filter their results, we eschew this and require a regular expression to match multiple package names because we will need this to work across other platforms in the future. This means that the following:
```ruby
packages("vim")
```
Will return *all* the "vim" packages on the system. The `packages` resource will take `"vim"`, turn it into `/vim/`, and greedily match anything with "vim" in the name. To match only a single package named `vim`, it needs to be an anchored regular expression.
```ruby
packages(/^vim$/)
```
Signed-off-by: Joshua Timberman <joshua@chef.io>
Use entries instead of list
Added a few more tests and non installed package in output
Signed-off-by: Alex Pop <apop@chef.io>
fix lint
Signed-off-by: Alex Pop <apop@chef.io>
Signed-off-by: Joshua Timberman <joshua@chef.io>
Resolved an issue checking ports on windows
The previous version wasn't really checking if a port was accessible as we were only validating if the ping succeeded. Using TcpTestSucceeded to determine if the connection worked or not.
Redhat conf_dir detection was regressed in 57d7275 which inadvertently
removed the setting of @conf_dir. Any attempt to use the postgres
resource on RHEL would rain an exception:
inspec> postgres.data_dir
TypeError: no implicit conversion of nil into String
Further, the redhat detection code appears to assume that RHEL always
uses versioned data directories. This however, does not appear to be the
case:
$ cat /etc/redhat-release
CentOS release 6.7 (Final)
$ sudo ls /var/lib/pgsql/
backups data pgstartup.log
The code now can handle both versioned and un-versioned directory
formats on RHEL. Further, it provides diagnostic warnings about
uncertainty in the discovered data directories and configuration
directories.
Signed-off-by: Steven Danna <steve@chef.io>
This allows the user to write:
describe port(22) do
it { should be_listening }
end
as well as
describe port('22') do
it { should be_listening }
end
without hitting an error.
Fixes#867
Signed-off-by: Steven Danna <steve@chef.io>
The output of `systemctl show SERVICENAME` can be misleading in the
case of non-native services (i.e. services configured via an init script
and integrated with systemd via a shim) or for more sophisticated unit
types.
For example, the UnitFileState of ntp is "bad":
> systemctl show ntp | grep UnitFileState
UnitFileState=bad
despite systemd reporting it as enabled:
> systemctl is-enabled ntp
ntp.service is not a native service, redirecting to
systemd-sysv-install
Executing /lib/systemd/systemd-sysv-install is-enabled ntp
enabled
Further, the old parsing code would have missed unit files in the
following states that are technically enabled:
enabled-runtime, indirect, generated, and transient
Using the `is-enabled` commands ensures that we report the same enabled
status that systemd reports, without having to update our own parsing in
the event that new unit states are added. Additionally, as shown above,
it handles the sysv compatibility helper.
Similarly, the is-active helper command ensures that we always report
the same active/not-active status as systemd would natively. For
instance, a quick reading of `src/systemctl/systemctl.c` in the systemd
source shows that systemctl reports units as active if they are in the
state `UNIT_ACTIVE` or `UNIT_RELOADING`.
Fixes#749
Signed-off-by: Steven Danna <steve@chef.io>
When used in combination: `shadow[.filter(...)].entries.each { |entry| ... }`, these entries would not be very descriptive at all. You would basically only retrieve the full filter chain e.g. 20 times, without any information about what entry you are currently looking at. This fixes it, by providing the entry identified by the user name
This is just for simplicity. I expect other users to make the same mistake when using it, so I would rather our tests crash if we have this type of conflict again and prevent it in the first place. Renaming File to FileResource should take care of all important places
Many of the resources are named as a top-level class with a fairly generic class name, such as "OS". This causes an issue specifically with kitchen-google which depends on a gem which depends on the "os" gem which itself defines an OS class with a different superclass. This prevents users from using TK, Google Compute, and Inspec without this fix.
Some mocked commands had their digest changed as well due to the new indentation, specifically in the User and RegistryKey classes.
I strongly recommend viewing this diff with `git diff --ignore-space-change`
to see the *real* changes. :)
Bugfix: there were services that would get matched because of the way the regex was constructed, i.e. if the user inserted `.` or `*` or anything regexy. Even if the service only had part of the name you were interested in, it would match (e.g. `sshd` would find `my_sshdaemon`).
Apart from this, runlevels are now detected for SystemV. This is exposed in `#info`
