This change adds support in Habitat-packaged profiles for
profiles that depend on other profiles. When `inspec habitat
profile create` or `inspec habitat profile upload` is run,
it will see if the profile's dependencies have been vendored
yet, and if not, it will vendor them before creating the
habitat artifact.
For the git and URL fetchers, more explicit creation of the
target directories for the vendored profiles is done. This
is implicitly done via normal CLI interactions a user may
go through, but in our case, we want to ensure those directories
are there before the fetchers try to write out content.
By adding this support, we also fix a bug experienced in Habitat
where a profile that was packaged before an `inspec exec` was run
for the profile would cause a failure in Habitat. This is caused
by `inspec exec` doing a vendor of the dependencies if necessary
and generating the inspec.lock file. In Habitat, the package dir
is not writable by the hab user and InSpec would fail to run due
to an inability to write out an inspec.lock.
Signed-off-by: Adam Leff <adam@leff.co>
Netstat will sometimes output an IPv6 address that is not
formatted correctly; the address is either truncated or uses
or implies the `::` shorthand notation twice. This yields an
invalid IPv6 address and causes IPAddr.new to choke.
This change guards against invalid IP addresses and ensures they
do not end up in the port resource's entries list.
Signed-off-by: Adam Leff <adam@leff.co>
* add tag object
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* add tests for to_hash function in tag
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
When SimpleConfig parses a config file that has sections, such as a mysqld
config file, the values within that section are returned via a Hash. However,
we do not provide an easy way to write tests for those deep hash values:
```
describe mysql_conf('/tmp/my.cnf') do
its('mysqld.expire_logs_days') { should cmp 10 }
end
MySQL Configuration
∅ undefined method `expire_logs_days' for #<Hash:0x007fe463795a00>
```
This change provides a method-based accessor for Hashes that are built via
SimpleConfig.
```
describe mysql_conf('/tmp/my.cnf') do
its('mysqld.expire_logs_days') { should cmp 10 }
end
MySQL Configuration
✔ mysqld.expire_logs_days should cmp == 10
```
Fixes#1541 by changing the way the attributes are fetched.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to access array values via the `json` resource:
```
describe json('/tmp/test.json') do
its(['array',0]) { should eq "zero" }
end
```
... the resulting data would be an array of the size of the original array
with all the values replaced with nils:
```
expected: "zero"
got: [nil, nil, nil]
```
This was due to a bug in the ObjectTraverser mixin that mapped array values
back through `extract_value` rather than properly handling the passed-in
key(s). This worked fine for the specific data format created by the `csv`
resource but did not work `json` or any other resource that subclassed the
`JsonConfig` resource.
This change fixes the logic when dealing with an array when it's encountered,
and fixes up the `csv` resource with its own `value` method.
This change also adds tests for ObjectTraverser.
Signed-off-by: Adam Leff <adam@leff.co>
Currently, if the inspec.yml for a profile is invalid (such as including
an improperly-defined multi-line string), InSpec will throw an exception
from the YAML parser that does not given a clear indication that the
issue was encountered while parsing the inspec.yml file.
This change introduces a better exception message to clue the user into
where the problem actually lies.
Signed-off-by: Adam Leff <adam@leff.co>
On Linux, netstat may show a tcp6/udp6 protocol line but include a
v4 address. This happens with AF_INET6 sockets that can accept
both v4 and v6 traffic. The port check was not properly handling
this situation and trying to pass a v4 address to URI bracketed as
if it was a v6 address.
Signed-off-by: Adam Leff <adam@leff.co>
Two new commands have been created:
* inspec habitat profile create /path/to/profile
* inspec habitat profile upload /path/to/profile
The `create` command creates a Habitat artifact that contains the contents
of the Habitat profile found at the provided path. This will be used later
in some Habitat + InSpec integrations.
The `upload` command does the same create process but then uploads the
resulting artifact to the Habitat Depot.
Signed-off-by: Adam Leff <adam@leff.co>
The following new resources have been added; however, they
presently only support FreeBSD and similar.
* `zfs_dataset`: tests if a named ZFS dataset is present
and/or has certain properties.
* `zfs_pool`: tests if a named ZFS pool is present and/or
has certain properties.
Additionally, the `mount` resource has been reworked to
include support for FreeBSD; while the existing class
was renamed to LinuxMountParser.
Unit-tests were added for all of the above.
Signed-off-by: Joseph Benden <joe@benden.us>
When running InSpec with multiple profiles, and two or more of the profiles
are read in using the "Flat" SourceReader (i.e. they are not actual profiles
with a metadata file like inspec.yml, but rather just a folder containing
.rb files with controls and tests in them), InSpec would throw a NilClass
error when building the necessary objects for the formatter.
The cause was in `#profile_contains_example` in the formatter code which
checks to see if the profile name is the same as the profile_id in the given
example. However, if both of those were nil, it would potentially match the
wrong Flat-read profile.
This change fixes this in two ways: refusing to match if the profile name
or example profile ID is nil, and adding a default name to a profile if
it doesn't have a title or name. This will solve the matching issue and also
clean up the formatter output so users can more easily tell what tests
are from which profile/path.
Signed-off-by: Adam Leff <adam@leff.co>
The crontab resource parses a particular user's crontab file into
individual entries and allows the user to assert information about
each entry as needed.
Signed-off-by: Adam Leff <adam@leff.co>
This pull request adds a packages resource so that we can check for pattern matches against all the packages on a system. This initially implements only dpkg support for debian-based platforms so we can cover this use case:
```ruby
describe packages(/^xserver-xorg.*/) do
its("list") { should be_empty }
end
```
This uses FilterTable so we can supply additional queries, too.
```ruby
describe packages(/vi.+/).where { status != 'installed' } do
its('statuses') { should be_empty }
end
```
Users can specify the name as a string or a regular expression. If it is a string, we will escape it and convert it to a regular expression to use in matching against the full returned list of packages. If it is a regular expression, we take that as is and use it to filter the results.
While some package management systems such as `dpkg` can take a shell glob argument to filter their results, we eschew this and require a regular expression to match multiple package names because we will need this to work across other platforms in the future. This means that the following:
```ruby
packages("vim")
```
Will return *all* the "vim" packages on the system. The `packages` resource will take `"vim"`, turn it into `/vim/`, and greedily match anything with "vim" in the name. To match only a single package named `vim`, it needs to be an anchored regular expression.
```ruby
packages(/^vim$/)
```
Signed-off-by: Joshua Timberman <joshua@chef.io>
Use entries instead of list
Added a few more tests and non installed package in output
Signed-off-by: Alex Pop <apop@chef.io>
fix lint
Signed-off-by: Alex Pop <apop@chef.io>
Signed-off-by: Joshua Timberman <joshua@chef.io>
