* Refine the profile/test summary output of the CLI formatter
* The "Profile Summary" is misleading as it's not a summary of profile
success/failure but rather the controls within the profile(s). Altered
the output to be clear. I still like calling it the "profile summary"
but wanted to add clarity that the numbers are about the controls.
* Made the colorized output dynamic. The success/failure will only be
green/red if there are controls/tests that fall into that category.
That way we are not printing red failure text when there are no
actual failures. Fixes#1752.
* Cleaned up some grammar issues. ("1 failure" vs "1 failures")
Signed-off-by: Adam Leff <adam@leff.co>
* check the proper field for dpkg installation state fixes#2006
Signed-off-by: Mathieu Sauve-Frankel <msf@kisoku.net>
* Properly handle held packages on dpkg-flavored OS
InSpec was looking at the wrong field in `dpkg -s` output to determine
whether a package was installed or not. An installed, held package was
incorrectly reported as uninstalled.
This adds the proper unit tests and also adds a `be_held` matcher.
Thanks to @kisoku for the initial work in #2007.
Signed-off-by: Adam Leff <adam@leff.co>
With last weeks tag fix, `ourorg/container` ended up having its `repo` reported as `container`.
With this it'll be `ourorg/container` again.
Signed-off-by: Stephan Renatus <srenatus@chef.io>
* New matcher 'be_in'
Fixes#2018
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* small fixes to wording.
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* Added code to use be_in for with the following use case:
describe nginx do
its(module_list) { should be_in AUTHORIZED_MODULE_LIST }
end
Fixes#2018
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* Updates to the matcher
Fixes#2018
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* Added tests for the be_in matcher
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* Requested updates completed
Signed-off-by: Rony Xavier <rx294@nyu.edu>
Add a newline symbol to the end of the parsed input.
Sample hexdump of a file deployed by xinetd cookbook:
$ hexdump -C /var/chef/cache/cookbooks/xinetd/templates/default/xinetd.conf.erb | tail -2
000000b0 72 20 2f 65 74 63 2f 78 69 6e 65 74 64 2e 64 |r /etc/xinetd.d|
000000bf
Signed-off-by: Simonas Kareiva <simonas@5grupe.lt>
* bugfix: empty file strings from archive readers
Empty files in archives are sometimes possible (we just ran into this with TGZ), but is never a valid file to extract. So remove it and discount it altogether. Changed structure to support testing of these global calls.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* lint and rebuild
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
If a profile has a data files directory that looks like this:
```
files/platforms/one/data.json
files/platforms/two/data.json
files/platforms/three/data.json
```
... the source reader will return the directories in the list of files but with
nil contents. This causes an issue when Inspec::Profile tries to create a sha256
checksum of the profile contents only to try to cast nil to a string when
building the null-delimited profile contents string.
Files that are empty will have an empty string as its contents, so it's safe to
assume that file entries with nil contents are actually a directory and have no
affect on the profile's checksum. Therefore, this change will eliminate any file
entries in responses from the source readers where the contents are nil.
Signed-off-by: Adam Leff <adam@leff.co>
* Change host resource to use getent ahosts on Linux
In InSpec 1.31, we changed the `host` resource to use `dig` instead of `getent
hosts` for name resolution because `getent hosts` does not return all entries
(only the first v6 entry if it exists, then the first v4 entry) and we wanted to
keep the Darwin and Linux implementation as close as possible. Unfortunately,
this affected users' ability to do resolution checks for entried stored in their
/etc/hosts file.
This change goes back to using `getent` for Linux and changes to `getent ahosts`
which returns both v4 and v6 records. Additionally, the Darwin provider's dig
implementation was reordered to return v4 addresses before v6 addresses to be
consistent with how `getent ahosts` returns records.
Signed-off-by: Adam Leff <adam@leff.co>
* Update unit tests for resolve_with_getent with proper output
Signed-off-by: Adam Leff <adam@leff.co>
The logic used to determine whether a viable netcat binary exists is wrong and
prevents Linux hosts from doing TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix formatter when two profiles have the same name
In the event that an InSpec runner has two profiles that are named the same
(such as when InSpec generates a profile for the Flat source reader, and Test
Kitchen is running concurrently), InSpec could hand back a profile that does not
contain the example. This leads to nil control data and ugly NilClass errors
when TK runs concurrently.
This change modifies the method that finds the profile by control to not only
match on profile name but also match on example ID.
Signed-off-by: Adam Leff <adam@leff.co>
CoreOS is considered a member of the Linux family, and the `host` resource tries
to use `nc` on Linux hosts to test TCP reachability. Unfortunately, `nc` is not
available on CoreOS, but `ncat` is.
This change attempts to use `nc` first, then `ncat` if it's available.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix host resolution on Darwin, use dig wherever possible
The `host` and `dig` commands do not return non-zero if a query returns NXDOMAIN
or NOERROR, but the DarwinHostProvider was expecting it when deciding whether to
fall back to IPv4 if a IPv6 query failed. Therefore, the `host` resource would
not function properly when resolving hostnames on Darwin. The logic has been
changed to use `dig` short output and query for both v6 and v4 addresses.
Additionally, the LinuxHostProvider has been modified to prefer `dig` if it's
available to keep behavior similar between Darwin and Linux whenever possible.
This has the added benefit of providing v6 and v4 resolution if possible where
`getent hosts` only returns v6 if v6 records exist.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix up methods, add command mock, do string matching in ruby instead of command
Fixes#1643Fixes#1673
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* fixed a small courner case in the error detection - error: vs error
fixed resource to use 'shellwords' module to escape the query
requested chances in method architecture for testing
added unit tests
Fixes: #1814
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* updated resource and tests with requested review changes
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* removed unneeded call to `escaped_query` in the `create_sql_cmd`.
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* removed license info
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* Remove any "All Rights Reserved" references
InSpec is licensed and released under the Apache 2.0 license. This
change removes all reference to legacy code files that still had
any Copyright or License lines referring to "All Rights Reserved".
Signed-off-by: Adam Leff <adam@leff.co>
* fix functional tests
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
The resource itself only offers contents and params right now. It resolved
all include calls it can find and creates the aggregated config object.
This is limited in functionality. One last (set of) PR(s) is needed to
add an interface that makes querying this config file easier. It is due
to the file's inherent complexity that I want to explore which methods
are needed to be effective. In the meantime, this resource offers accessors
to the underlying data that are stable.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* make postgres resource working in mock runner (for inspec check)
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* keep nil for empty states
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
For cleanliness and ease of testing, I've moved the logic that
parses the server version from the compliance config to a
separate method.
Signed-off-by: Adam Leff <adam@leff.co>
* showing how to shellout in docs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* adding basic example
Signed-off-by: Richard Shade <rshade@rightscale.com>
* cleanup
Signed-off-by: Richard Shade <rshade@rightscale.com>
* adding in mysql socket, as this doesn't work with non-default installs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* updating per peer review to make socket not a req, and adding port
Signed-off-by: Richard Shade <rshade@rightscale.com>
* updating docs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* Fix to_s on directory resource
The `to_s` method on the `directory` resource is not defined
in the correct class, leading `directory` resources to be printed
as the parent resource (`file`) instead.
Signed-off-by: Adam Leff <adam@leff.co>
* Directory existence should check to see if it's a directory
Signed-off-by: Adam Leff <adam@leff.co>
Net::HTTP does not gracefully handle HTTP options/headers
that have nil values. This updates Fetchers::Url to verify
that all headers we attempt to configure have non-nil,
non-empty values.
This originally surfaced via the audit cookbook with the
chef-automate fetcher in use without the data_collector
token being set.
Signed-off-by: Adam Leff <adam@leff.co>
* Adding toml resource
This adds a `toml` resource that inherits from the json resource and
behaves the same way as the JSON and YAML resources.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
* s/package/service/ on service unit test descriptions
Signed-off-by: Kristian Vlaardingerbroek <kvlaardingerbroek@schubergphilis.com>
* Add support for CoreOS to the service resource
Signed-off-by: Kristian Vlaardingerbroek <kvlaardingerbroek@schubergphilis.com>
* Remove some apparently unused test setup to remove some warnings.
* Initialize some instance variables before use to silence warnings.
* Remove an unused variable to remove a warning.
* Remove some indirection.
* Silence logger during tests.
* Check if an instance variable was defined before referencing to remove a warning.
* Define duplicated constant once in root rakefile.
* Initialize an instance variable to remove a warning.
* Remove PROJECT_DIR to reduce coupling.
Signed-off-by: Pete Higgins <pete@peterhiggins.org>
The is_automate_server_pre_080? and is_automate_server_080_and_later?
methods needed some fixing. The Compliance configuration could have
a "version" key that was not nil but was an empty hash, indicating
that it came from a pre-0.8.x Automate server. What we really need
to look for is config['version']['version'] being nil?.
Signed-off-by: Adam Leff <adam@leff.co>
Due to limitations in Thor it is not possible to set an argument to be both optional and its value to be mandatory. E.g. the user supplying the --password argument is optional and not always required, but whenever it is used, it requires a value. Handle options that were defined with mandatory values in a way that fails with an `ArgumentError` if the value is missing, i.e.:
```
> inspec exec examples/profile --password
ArgumentError: Please provide a value for --password. For example: --password=hello.
```
It works without `--password` or with `--password=arg`. Also handled for `--sudo-password`.
Fixes: https://github.com/chef/inspec/issues/1901
As suggested: https://github.com/chef/inspec/pull/1904
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
This is currently failing because both `alias` and `alias_method` create method imprints in the FileProvider. This leads to a failure where the TarProvider assumes it doesn't implement `binread`, which in fact it does, since it just calls `read`.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* Add TCP reachability support on Linux for host resource
This enhances the `host` resource on Linux targets by using netcat
(if installed) to perform TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* documentation updates
Signed-off-by: Adam Leff <adam@leff.co>
* Appease rubocop
Signed-off-by: Adam Leff <adam@leff.co>
On Windows, `inspec archive` would sometimes produce incorrect archive files. These would look fine, as tgz files, but would not execute correctly. This would lead to bewildering error messages like this one:
```
Unable to parse inspec.yml: line 1, control characters are not allowed
```
Fix it by treating the files as binary before writing them to get around any encoding issues, since the stream handler is a raw io object anyway.
Closely related to https://github.com/chef/inspec/pull/1906
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
On Windows, we ran into the problem that the execution of inherited profiles would (sometimes) not work. This was due to the use of `File.read` and `File.write` and handling inside the file provider, which works in most cases (especially *nix systems), but does not behave as expected on Windows. A better and more correct way of treating these files is via binary read and write mode, which changes the underlying encoding of both strings that are passed along.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Generated duplicate messages due to the way that examples are aggregated in RSpec. Make sure we never show any duplicate test result messages, as they offer not value to any user.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
The Compliance::API.version method could potentially return
a hash containing no "version" key but would return an empty
hash upon any expected failure. Downstream callers of the
Compliance::API.version method were looking for a "version"
key to always be present when, in some cases, it would not be.
This change ensures that if a version is not available, there
is no "version" key in the hash, and downstream callers of this
method have been changed to check for nil instead of empty.
Signed-off-by: Adam Leff <adam@leff.co>
* add bitbucket repo url handling
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
* backout changes to .gitignore
* adding unit tests for bitbucket url transformers
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
* fixing some indents
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
* fix some indents
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
Calling the `digest` library directly unfortunately causes issues in FIPS 140-2 mode:
sha512.c(81): OpenSSL internal error, assertion failed: Low level API call to digest SHA512 forbidden in FIPS mode!
Switching to `OpenSSL` as the caller resolve these issues
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
When running `inspec exec` without the `target` option but against remote endpoints OR when executing it with the `localhost://` target AND having `--sudo` active it would abort the execution. `--target` is a helper to set the Train parameters for `backend`, `host`, `user`, `port`, and potentially `password`. The detection would fail on providing any of these separately without specifying `--target`. The same holds true for the `localhost` train backend or just `localhost://` target.
This type of detection has since moved to Train. The driving reason was to have this very useful check for localhost vs sudo run for any type of inspec (or for that matter: train) execution.
This PR depends on https://github.com/chef/train/pull/179 and the next release of train.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Unsupported operating systems AND the mockloader when using inspec analysis tools may lead to powershell being called with the command being `nil`, because the resource skips during the initialize phase. Instead, propagate an empty string so that `command` has a valid input and then skip the resource.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Non-url URIs may have lead to broader crashes than initially fixed. Overwrite all URL resolvers in the plugin to work with these non-schema URLs.
Fixes#1473
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Due to habitat-sh/habitat#2395, we shouldn't try to log stderr output
to a file for now. While this makes for a less-than-awesome UX, it's
better than a process locking up due to a buffer filling up!
This change redirects stderr from InSpec to stdout and adds some
helpful troubleshooting messages. Should InSpec be able to generate
unique exit codes for when controls fail (vs. a Ruby eval failure)
then we can fix this up some more, too.
Signed-off-by: Adam Leff <adam@leff.co>
The `interface` resource currently refers to methods that don't
yet exist. Fixing the docs for now and will add the features
later.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to parse the profile out of the target URL, we
were not raising an exception if we failed to do so. Such a situation
could arise if a user's inspec config.json is incorrect either due to
manual editing or failure to re-login after an upgrade past Automate
0.8.0.
This change provides a clear exception if this occurs and also adds
tests for the compliance_profile_name method.
Signed-off-by: Adam Leff <adam@leff.co>
Postgres configuration doesnt always include absolute paths. When using relative paths it will fail!
Also: We treat the include as either a string or an array; when the first condition succeeds and you get a string and the second fails you get a array => ruby tries to add a string with an array and fails. This is now fixed as well.
Fixes: https://github.com/chef/inspec/issues/1780
Fixes: https://github.com/chef/inspec/issues/1738
Signed-off-by: Aaron Lippold <lippold@gmail.com>
The gem resource used to determine if a gem is installed based on the exit
status of the `gem` command, however that command will return zero
if the package was found or not. This patch checks to ensure that the
`gem list` command actually includes the gem name or is empty to
determine if the gem is in fact installed.
If the gem command returns something other than a `0` exit code, then
it'll skip the resource.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
This adds supports for connecting to MS SQL instances using Window
authentication rather than SQL authentication. By leaving either the
user or password parameters blank causes the sqlcmd to leave off the -U
and -P params. This will cause sqlcmd to authenticate as the current
Windows user.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Inspired by #1640, this change cleans up the logic used when
reading in secrets files, provides clearer warnings when the
secrets files can't be parsed, and adds tests for those methods.
Signed-off-by: Adam Leff <adam@leff.co>
Switched the oracle_session resource to take an option hash and allow
for configuring hostname, DB_SID, and sqlplus binary path.
Added unit tests.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Since the command to enable them is different, also make that change in
the output based on the shell used.
Signed-off-by: Nathan L Smith <smith@chef.io>
The CLI formatter is not currently honoring the --no-color flag
when outputting CLI output. This change cleans up how we format
with color and properly support the flag for use cases where
color-encoding characters make the output difficult to use
(i.e. when someone redirects CLI output to a text file for
sharing with others).
Signed-off-by: Adam Leff <adam@leff.co>
This adds an oracle_session resource similar to the existing resource
for MySQL and MSSQL. It assumes the sqlplus tool is installed and in
the path of the user InSpec connects as.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
Running `inspec exec` with --sudo locally produces unintended results
given that we cannot escalate local Ruby methods after we're already
running. --sudo is meant to only be used with remote targets. We do
not currently enforce that.
This change will print an error for the user if they attempt to use
--sudo with a local exec and exit non-zero.
Signed-off-by: Adam Leff <adam@leff.co>
The file resource's `#content` method will return nil if the file
cannot be read for permissions issues. If you try to run a profile
that uses the `xinetd` resource without sudo privileges, InSpec
would try to call `#empty` on nil.
This change fixes this issue by checking for nil before checking
for emptiness.
Signed-off-by: Adam Leff <adam@leff.co>
The exit status would never return "InSpec run completed successfully"
since the value of $RC was always an integer which never was prefixed
with an "x". This checks the return directly since we currently do not
have any complex logic which warrants the need to check different
return status values where a prefixed return code is necessary.
Signed-off-by: Ryan Hass <rhass@users.noreply.github.com>
* Fixed bug with install step where profile would include the .hart
files from previous builds.
* Updated the generated plan to support plan.sh syntax changes in
habitat 0.21.0 and later by removing the `pkg_source` and the
`do_download`, `do_verify`, and `do_unpack` overrides.
* Updated the generate run hook to leverage habitat to perform most of
the origin, package name, and path variable interpolations.
Signed-off-by: Ryan Hass <rhass@users.noreply.github.com>
Even though I couldn't find any docs around include_dir accepting anything other than a string I left the existing functionality alone.
This forces include_dir to check multiple directories as well as single string directories for additional conf files.
Signed-off-by: Elliott Davis <edavis@chef.io>
A new `help matchers` command will provide helpful examples on a few
of the standard matchers: be, cmp, include, etc.
I also cleaned up the formatting of the resources list and provided
better feedback if a user requests help for an unknown resource.
Resolves#1684
Signed-off-by: Adam Leff <adam@leff.co>
Instead of my favorite shortcut of `os.inspec` just finally add it as a global keyword.
Preparation for https://github.com/chef/inspec/issues/1396
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
This is always bothersome when debugging code and drilling down objects, since it will just a return a two-layer anonymous class with no help at all.
Instead print a nice name and even give a bit of information on pretty-printing (which pry does naturally)
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Unindent has been misbehaving for control `desc`riptions by completely removing newlines. This is now fixed and the unindentation mechanism improved to behave as expected.
Removing empty lines at the beginning and end of string remains unchanged.
Tabs are not treated as multi-space indentations; supporting them as 8-space chars would require additional effort (please comment if this is important to you)
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
I.e. instead of printing them as:
```
desc "hello\nworld"
```
it would instead do:
```
desc "hello
world"
```
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
We needed to be able to run inspec against endpoints with self signed certificates and this was the quickest way for us to get there.
Signed-off-by: Elizabeth Uselton <elizabeth.uselton@gmail.com>
Because the sleep_time is not written to a config file but instead
only rendered into the run hook, hab-sup doesn't restart the running
process upon any config updates. This change moves the sleep_time to
a settings config file which is read in by the run hook. This will
allow Habitat to restart the InSpec process whenever a user changes
the sleep time.
I also cleaned up the non-zero exit error message to give the user
a better indication as to why the run may have "failed."
Signed-off-by: Adam Leff <adam@leff.co>
Many InSpec resources require root access to properly scan. Let's
default the run user to root until we need to accommodate different
options.
Signed-off-by: Adam Leff <adam@leff.co>
RubyGems on windows comes with a batch file that wraps the `gem` command
so it executes correctly. This change uses that batch file for windows
for our `gem` resource, and also properly handles when we receive no output
from the command.
Signed-off-by: Adam Leff <adam@leff.co>
SSL resource now adds the servername option in client hello,
utilizing the the great work of @adamcaudill to support
SNI in sslshake [1]
[1] https://github.com/arlimus/sslshake/pull/5
Signed-off-by: Christoph Kappel <kappel.christoph@gmail.com>
In #1454, we welcomed a newly-revamped JUnit formatter which has
a dependency on Nokogiri. Unfortunately, this had led us to problems
getting InSpec included in Chef omnibus builds (see chef/chef#5937)
because Chef is using Ruby 2.4.1 and the Nokogiri maintainers have
not yet released a windows binary gem that supports Ruby 2.4.x.
This has led to breaking builds in Chef's CI platform and would
block the acceptance of chef/chef#5937.
This change replaces Nokogiri use with REXML instead. While REXML
can be slower than Nokogiri, it does not require native extensions
and is supported on all Chef platforms.
Signed-off-by: Adam Leff <adam@leff.co>
* Enable customization of supermarket_url
It looks like this was originally supposed to work, but at some point
the default value was put in the method body rather than in the method
parameters.
This change allows you to configure the supermarket_url in test kitchen
like so:
```
verifier:
inspec_tests:
- name: linux-hardening
supermarket: som3guy/apache-disa-stig
supermarket_url: https://my.supermarket.com
```
Signed-off-by: Ryan Larson <ryan.mango.larson@gmail.com>
If a repo did not exist, running matchers against it (such as `exist`)
were failing due to a bug in `#to_s` when fetching the repo name. The
`info` method would return nil and we'd still try to treat it as a hash.
This change ensures that info is always a hash, possibly empty if the
repo doesn't exist, and uses the repo name provided by the user rather
than shortening it to be consistent with our other resources which don't
manipulate the user input in the formatter.
Also added a method_missing to allow users to interrogate repo options,
such as baseurl or gpgcheck.
Signed-off-by: Adam Leff <adam@leff.co>
The CLI output for the vendoring of profiles has been updated slightly
to be more clear, and the functional tests have been modified to match
as well.
Signed-off-by: Adam Leff <adam@leff.co>
Per PR feedback, `Inspec::ProfileVendor` is created to centralize
the logic and data of vendoring profile dependencies. The `BaseCLI`
class and the `Habitat::Profile` class have been modified to use it
Signed-off-by: Adam Leff <adam@leff.co>
This change adds support in Habitat-packaged profiles for
profiles that depend on other profiles. When `inspec habitat
profile create` or `inspec habitat profile upload` is run,
it will see if the profile's dependencies have been vendored
yet, and if not, it will vendor them before creating the
habitat artifact.
For the git and URL fetchers, more explicit creation of the
target directories for the vendored profiles is done. This
is implicitly done via normal CLI interactions a user may
go through, but in our case, we want to ensure those directories
are there before the fetchers try to write out content.
By adding this support, we also fix a bug experienced in Habitat
where a profile that was packaged before an `inspec exec` was run
for the profile would cause a failure in Habitat. This is caused
by `inspec exec` doing a vendor of the dependencies if necessary
and generating the inspec.lock file. In Habitat, the package dir
is not writable by the hab user and InSpec would fail to run due
to an inability to write out an inspec.lock.
Signed-off-by: Adam Leff <adam@leff.co>
Netstat will sometimes output an IPv6 address that is not
formatted correctly; the address is either truncated or uses
or implies the `::` shorthand notation twice. This yields an
invalid IPv6 address and causes IPAddr.new to choke.
This change guards against invalid IP addresses and ensures they
do not end up in the port resource's entries list.
Signed-off-by: Adam Leff <adam@leff.co>
* add tag object
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* add tests for to_hash function in tag
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
When SimpleConfig parses a config file that has sections, such as a mysqld
config file, the values within that section are returned via a Hash. However,
we do not provide an easy way to write tests for those deep hash values:
```
describe mysql_conf('/tmp/my.cnf') do
its('mysqld.expire_logs_days') { should cmp 10 }
end
MySQL Configuration
∅ undefined method `expire_logs_days' for #<Hash:0x007fe463795a00>
```
This change provides a method-based accessor for Hashes that are built via
SimpleConfig.
```
describe mysql_conf('/tmp/my.cnf') do
its('mysqld.expire_logs_days') { should cmp 10 }
end
MySQL Configuration
✔ mysqld.expire_logs_days should cmp == 10
```
Fixes#1541 by changing the way the attributes are fetched.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to access array values via the `json` resource:
```
describe json('/tmp/test.json') do
its(['array',0]) { should eq "zero" }
end
```
... the resulting data would be an array of the size of the original array
with all the values replaced with nils:
```
expected: "zero"
got: [nil, nil, nil]
```
This was due to a bug in the ObjectTraverser mixin that mapped array values
back through `extract_value` rather than properly handling the passed-in
key(s). This worked fine for the specific data format created by the `csv`
resource but did not work `json` or any other resource that subclassed the
`JsonConfig` resource.
This change fixes the logic when dealing with an array when it's encountered,
and fixes up the `csv` resource with its own `value` method.
This change also adds tests for ObjectTraverser.
Signed-off-by: Adam Leff <adam@leff.co>
As raised in #1526, adding an additional example showing how
a user can use the `where` accessor to find commands matching
a pattern and write a test using the results.
Signed-off-by: Adam Leff <adam@leff.co>
Currently, if the inspec.yml for a profile is invalid (such as including
an improperly-defined multi-line string), InSpec will throw an exception
from the YAML parser that does not given a clear indication that the
issue was encountered while parsing the inspec.yml file.
This change introduces a better exception message to clue the user into
where the problem actually lies.
Signed-off-by: Adam Leff <adam@leff.co>
On Linux, netstat may show a tcp6/udp6 protocol line but include a
v4 address. This happens with AF_INET6 sockets that can accept
both v4 and v6 traffic. The port check was not properly handling
this situation and trying to pass a v4 address to URI bracketed as
if it was a v6 address.
Signed-off-by: Adam Leff <adam@leff.co>
* Add open_timeout to NET::HTTP.start call
Signed-off-by: Makoto Nozaki <makoto.nozaki@twosigma.com>
* Code cleanup based on the discussion at #1538
Signed-off-by: Makoto Nozaki <makoto.nozaki@twosigma.com>
When running a InSpec profile built with Habitat, we now
write the formatter/reporter data to a JSON file in the
pkg.svc_var_path rather than STDOUT. This will allow for
programmatic collection of this data and future enhancements
to allow this data to be passed around a Habitat ring.
This also corrects an issue creating a Habitat profile if the
profile had never been in the local InSpec cache. By setting a
mock Backend when creating the profile object, similarly to what
the archivers do, this issue is avoided.
Signed-off-by: Adam Leff <adam@leff.co>
Fixes issue #1508
* Windows terminals don't support extended ANSI colours. Use basic + intensity
* Windows terminals don't support UTF-8 well so don't use special characters
Other OS'es get what they had before.
Signed-off-by: Richard Nixon <richard.nixon@btinternet.com>
Two new commands have been created:
* inspec habitat profile create /path/to/profile
* inspec habitat profile upload /path/to/profile
The `create` command creates a Habitat artifact that contains the contents
of the Habitat profile found at the provided path. This will be used later
in some Habitat + InSpec integrations.
The `upload` command does the same create process but then uploads the
resulting artifact to the Habitat Depot.
Signed-off-by: Adam Leff <adam@leff.co>
The following new resources have been added; however, they
presently only support FreeBSD and similar.
* `zfs_dataset`: tests if a named ZFS dataset is present
and/or has certain properties.
* `zfs_pool`: tests if a named ZFS pool is present and/or
has certain properties.
Additionally, the `mount` resource has been reworked to
include support for FreeBSD; while the existing class
was renamed to LinuxMountParser.
Unit-tests were added for all of the above.
Signed-off-by: Joseph Benden <joe@benden.us>
When in inspec shell, you need to type the `help` command to find out info
about your target system. This info would be super helpful right out of the
gate so users have confidence that they're targeting the correct system.
The target info is still available via the `help` command as it always has
been, as well.
Signed-off-by: Adam Leff <adam@leff.co>
The inline docs for SourceReaders::InspecReader#new state that it takes
a SourceReader object for the target... but we're trying to create the
SourceReader object! It actually takes a FileProvider object that is
capabile of listing files for the given profile and reading them.
Signed-off-by: Adam Leff <adam@leff.co>
When running InSpec with multiple profiles, and two or more of the profiles
are read in using the "Flat" SourceReader (i.e. they are not actual profiles
with a metadata file like inspec.yml, but rather just a folder containing
.rb files with controls and tests in them), InSpec would throw a NilClass
error when building the necessary objects for the formatter.
The cause was in `#profile_contains_example` in the formatter code which
checks to see if the profile name is the same as the profile_id in the given
example. However, if both of those were nil, it would potentially match the
wrong Flat-read profile.
This change fixes this in two ways: refusing to match if the profile name
or example profile ID is nil, and adding a default name to a profile if
it doesn't have a title or name. This will solve the matching issue and also
clean up the formatter output so users can more easily tell what tests
are from which profile/path.
Signed-off-by: Adam Leff <adam@leff.co>
The crontab resource parses a particular user's crontab file into
individual entries and allows the user to assert information about
each entry as needed.
Signed-off-by: Adam Leff <adam@leff.co>
The other Chef tooling (chef-client, chef, kitchen, berks, etc.)
support a `-v` flag to display the version. Currently, inspec
errors out with the following error:
```
Could not find command "_v".
```
This adds a Thor map so that `-v` executes the `version` command.
Signed-off-by: Adam Leff <adam@leff.co>
This pull request adds a packages resource so that we can check for pattern matches against all the packages on a system. This initially implements only dpkg support for debian-based platforms so we can cover this use case:
```ruby
describe packages(/^xserver-xorg.*/) do
its("list") { should be_empty }
end
```
This uses FilterTable so we can supply additional queries, too.
```ruby
describe packages(/vi.+/).where { status != 'installed' } do
its('statuses') { should be_empty }
end
```
Users can specify the name as a string or a regular expression. If it is a string, we will escape it and convert it to a regular expression to use in matching against the full returned list of packages. If it is a regular expression, we take that as is and use it to filter the results.
While some package management systems such as `dpkg` can take a shell glob argument to filter their results, we eschew this and require a regular expression to match multiple package names because we will need this to work across other platforms in the future. This means that the following:
```ruby
packages("vim")
```
Will return *all* the "vim" packages on the system. The `packages` resource will take `"vim"`, turn it into `/vim/`, and greedily match anything with "vim" in the name. To match only a single package named `vim`, it needs to be an anchored regular expression.
```ruby
packages(/^vim$/)
```
Signed-off-by: Joshua Timberman <joshua@chef.io>
Use entries instead of list
Added a few more tests and non installed package in output
Signed-off-by: Alex Pop <apop@chef.io>
fix lint
Signed-off-by: Alex Pop <apop@chef.io>
Signed-off-by: Joshua Timberman <joshua@chef.io>
We do not store a token in the config file but rather generate one on
each commmand. This is just a first pass and needs some work.
Signed-off-by: Montague, Brent <brent@bmontague.com>
Based on some feedback from @arlimus there were some methods that
were not part of the public inteface that I moved to private.
I changed the examples collection from a delete from the output_hash
to retrieve the controls.
Created a helper for the all_unique_controls which was used in two helper
methods.
Signed-off-by: Franklin Webber <franklin@chef.io>
The class size is too big and Rubocop is right. There are a few
more classes in there that could be extracted but I am going to
ignore it. The other issues that it presented were fair.
Signed-off-by: Franklin Webber <franklin@chef.io>
* Moved things around for better understanding of the class
* Used `private` to denote what was on the public interface
* Solved the ugly TODO which was calculating the state of the control's
summary
* Used `#examples` instead of `res = control[:results]` throughout the
#summary and #title methods
Signed-off-by: Franklin Webber <franklin@chef.io>
* Fixes an issue when specifying no profile
* Fixes an issue when displaying a profile that has included/required profiels
* Fixes an issue when specifying profiles with only metadata
* Fixes formatting for spacing to ensure it adheres to previous alignment
* Fixes issue with the Control object and the rolling up of failed
and skipped examples.
Signed-off-by: Franklin Webber <franklin@chef.io>
The profiles will display the controls with their results and
then display the examples not associated with any control but
within the profile.
Signed-off-by: Franklin Webber <franklin@chef.io>
A lot of the work in #flush_current_control is acting on the control.
I am starting the flip of the control and bringing those messages being
sent originating from a control class itself.
Signed-off-by: Franklin Webber <franklin@chef.io>
Cleans up the #stop action on the JSON formatter by creating more
methods that memoize values or provide values through a method
interface.
There is still more that can be done with the whole mapping
examples to controls through profiles.
Signed-off-by: Franklin Webber <franklin@chef.io>
The full JSON formatter was using the start step to setup the profiles_info.
I moved that to a memozied method so that the first time it is called it will
be created.
Signed-off-by: Franklin Webber <franklin@chef.io>
While rebasing the branch where I was working on the cli formatter I
noticed the addition of junit. However, it was not in the help.
Signed-off-by: Franklin Webber <franklin@chef.io>
