* Added line to fix bug when no key in file rule and updated test to validate bug fix
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated to consider corner case
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Added aide_conf resource and subsequent files
* Updated to match on all selection lines
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Changed to use CommentParser and fixed typo
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Fix typo in test file
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated to address PR feedback
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* check the proper field for dpkg installation state fixes#2006
Signed-off-by: Mathieu Sauve-Frankel <msf@kisoku.net>
* Properly handle held packages on dpkg-flavored OS
InSpec was looking at the wrong field in `dpkg -s` output to determine
whether a package was installed or not. An installed, held package was
incorrectly reported as uninstalled.
This adds the proper unit tests and also adds a `be_held` matcher.
Thanks to @kisoku for the initial work in #2007.
Signed-off-by: Adam Leff <adam@leff.co>
The fix is already provided here: https://github.com/chef/inspec/pull/2040
This PR only adds a unit test to catch it
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
If a profile has a data files directory that looks like this:
```
files/platforms/one/data.json
files/platforms/two/data.json
files/platforms/three/data.json
```
... the source reader will return the directories in the list of files but with
nil contents. This causes an issue when Inspec::Profile tries to create a sha256
checksum of the profile contents only to try to cast nil to a string when
building the null-delimited profile contents string.
Files that are empty will have an empty string as its contents, so it's safe to
assume that file entries with nil contents are actually a directory and have no
affect on the profile's checksum. Therefore, this change will eliminate any file
entries in responses from the source readers where the contents are nil.
Signed-off-by: Adam Leff <adam@leff.co>
* Change host resource to use getent ahosts on Linux
In InSpec 1.31, we changed the `host` resource to use `dig` instead of `getent
hosts` for name resolution because `getent hosts` does not return all entries
(only the first v6 entry if it exists, then the first v4 entry) and we wanted to
keep the Darwin and Linux implementation as close as possible. Unfortunately,
this affected users' ability to do resolution checks for entried stored in their
/etc/hosts file.
This change goes back to using `getent` for Linux and changes to `getent ahosts`
which returns both v4 and v6 records. Additionally, the Darwin provider's dig
implementation was reordered to return v4 addresses before v6 addresses to be
consistent with how `getent ahosts` returns records.
Signed-off-by: Adam Leff <adam@leff.co>
* Update unit tests for resolve_with_getent with proper output
Signed-off-by: Adam Leff <adam@leff.co>
* Fix host resolution on Darwin, use dig wherever possible
The `host` and `dig` commands do not return non-zero if a query returns NXDOMAIN
or NOERROR, but the DarwinHostProvider was expecting it when deciding whether to
fall back to IPv4 if a IPv6 query failed. Therefore, the `host` resource would
not function properly when resolving hostnames on Darwin. The logic has been
changed to use `dig` short output and query for both v6 and v4 addresses.
Additionally, the LinuxHostProvider has been modified to prefer `dig` if it's
available to keep behavior similar between Darwin and Linux whenever possible.
This has the added benefit of providing v6 and v4 resolution if possible where
`getent hosts` only returns v6 if v6 records exist.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix up methods, add command mock, do string matching in ruby instead of command
Fixes#1643Fixes#1673
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* Remove any "All Rights Reserved" references
InSpec is licensed and released under the Apache 2.0 license. This
change removes all reference to legacy code files that still had
any Copyright or License lines referring to "All Rights Reserved".
Signed-off-by: Adam Leff <adam@leff.co>
* fix functional tests
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
The resource itself only offers contents and params right now. It resolved
all include calls it can find and creates the aggregated config object.
This is limited in functionality. One last (set of) PR(s) is needed to
add an interface that makes querying this config file easier. It is due
to the file's inherent complexity that I want to explore which methods
are needed to be effective. In the meantime, this resource offers accessors
to the underlying data that are stable.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* Adding toml resource
This adds a `toml` resource that inherits from the json resource and
behaves the same way as the JSON and YAML resources.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
* Add TCP reachability support on Linux for host resource
This enhances the `host` resource on Linux targets by using netcat
(if installed) to perform TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* documentation updates
Signed-off-by: Adam Leff <adam@leff.co>
* Appease rubocop
Signed-off-by: Adam Leff <adam@leff.co>
The gem resource used to determine if a gem is installed based on the exit
status of the `gem` command, however that command will return zero
if the package was found or not. This patch checks to ensure that the
`gem list` command actually includes the gem name or is empty to
determine if the gem is in fact installed.
If the gem command returns something other than a `0` exit code, then
it'll skip the resource.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
Netstat will sometimes output an IPv6 address that is not
formatted correctly; the address is either truncated or uses
or implies the `::` shorthand notation twice. This yields an
invalid IPv6 address and causes IPAddr.new to choke.
This change guards against invalid IP addresses and ensures they
do not end up in the port resource's entries list.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to access array values via the `json` resource:
```
describe json('/tmp/test.json') do
its(['array',0]) { should eq "zero" }
end
```
... the resulting data would be an array of the size of the original array
with all the values replaced with nils:
```
expected: "zero"
got: [nil, nil, nil]
```
This was due to a bug in the ObjectTraverser mixin that mapped array values
back through `extract_value` rather than properly handling the passed-in
key(s). This worked fine for the specific data format created by the `csv`
resource but did not work `json` or any other resource that subclassed the
`JsonConfig` resource.
This change fixes the logic when dealing with an array when it's encountered,
and fixes up the `csv` resource with its own `value` method.
This change also adds tests for ObjectTraverser.
Signed-off-by: Adam Leff <adam@leff.co>
Currently, if the inspec.yml for a profile is invalid (such as including
an improperly-defined multi-line string), InSpec will throw an exception
from the YAML parser that does not given a clear indication that the
issue was encountered while parsing the inspec.yml file.
This change introduces a better exception message to clue the user into
where the problem actually lies.
Signed-off-by: Adam Leff <adam@leff.co>
On Linux, netstat may show a tcp6/udp6 protocol line but include a
v4 address. This happens with AF_INET6 sockets that can accept
both v4 and v6 traffic. The port check was not properly handling
this situation and trying to pass a v4 address to URI bracketed as
if it was a v6 address.
Signed-off-by: Adam Leff <adam@leff.co>
The following new resources have been added; however, they
presently only support FreeBSD and similar.
* `zfs_dataset`: tests if a named ZFS dataset is present
and/or has certain properties.
* `zfs_pool`: tests if a named ZFS pool is present and/or
has certain properties.
Additionally, the `mount` resource has been reworked to
include support for FreeBSD; while the existing class
was renamed to LinuxMountParser.
Unit-tests were added for all of the above.
Signed-off-by: Joseph Benden <joe@benden.us>
The crontab resource parses a particular user's crontab file into
individual entries and allows the user to assert information about
each entry as needed.
Signed-off-by: Adam Leff <adam@leff.co>
This pull request adds a packages resource so that we can check for pattern matches against all the packages on a system. This initially implements only dpkg support for debian-based platforms so we can cover this use case:
```ruby
describe packages(/^xserver-xorg.*/) do
its("list") { should be_empty }
end
```
This uses FilterTable so we can supply additional queries, too.
```ruby
describe packages(/vi.+/).where { status != 'installed' } do
its('statuses') { should be_empty }
end
```
Users can specify the name as a string or a regular expression. If it is a string, we will escape it and convert it to a regular expression to use in matching against the full returned list of packages. If it is a regular expression, we take that as is and use it to filter the results.
While some package management systems such as `dpkg` can take a shell glob argument to filter their results, we eschew this and require a regular expression to match multiple package names because we will need this to work across other platforms in the future. This means that the following:
```ruby
packages("vim")
```
Will return *all* the "vim" packages on the system. The `packages` resource will take `"vim"`, turn it into `/vim/`, and greedily match anything with "vim" in the name. To match only a single package named `vim`, it needs to be an anchored regular expression.
```ruby
packages(/^vim$/)
```
Signed-off-by: Joshua Timberman <joshua@chef.io>
Use entries instead of list
Added a few more tests and non installed package in output
Signed-off-by: Alex Pop <apop@chef.io>
fix lint
Signed-off-by: Alex Pop <apop@chef.io>
Signed-off-by: Joshua Timberman <joshua@chef.io>
Previous, require_controls was including all controls from the named
profile, despite the documented behavior being that it only includes
controls explicitly pulled in by the user. The cause was two-fold:
1) A previous refactor meant that we weren't removing the rule from the
correct context, and
2) We weren't descending down the dependency tree when filtering rules.
This commit fixes the require_controls DSL method and adds a test to
help prevent future regressions.
Signed-off-by: Steven Danna <steve@chef.io>
All resources from deps are added into the control_eval_context used by
the current profile. However, if there is a name conflict, the last
loaded resource wins. The new `require_resource` dsl method allows the
user to do the following:
require_resource(profile: 'profile_name',
resource: 'other',
as: 'renamed')
describe renamed do
...
end
Signed-off-by: Steven Danna <steve@chef.io>
The goal of these changes is to ensure that the libraries from
dependencies are loaded even if their controls are never included. To
facilitate this, we break up the loading into seperate steps, and move
the loading code into the Profile which has acceess to the dependency
information.
Signed-off-by: Steven Danna <steve@chef.io>
Previously, all resources were loaded into a single resource registry.
Now, each profile context has a resource registry, when a profile's
library is loaded into the profile context, we update the
profile-context-specific resource registry. This local registry is
then used to populate the execution context that the rules are
evaluated in.
Signed-off-by: Steven Danna <steve@chef.io>
A few minor issues were causing 3 functional test failures on OS X.
These were not program errors but where rather the result of the
profiles under test assuming a linux environment.
Since many of the developers who will work on this project in the future
will be running OS X, let's ensure they can run the functional tests
easily.
Signed-off-by: Steven Danna <steve@chef.io>
The goal of this change is to provide an isolated view of the available
profiles when the user calls the include_controls or require_controls
APIs. Namely,
- A profile should only be able to reference profiles that are part of
its transitive dependency tree. That is, if the dependency tree for a
profile looks like the following:
A
|- B --> C
|
|- D --> E
Then profile B should only be able to see profile C and fail if it
tries to reference A, D, or E.
- The same profile should be include-able at different versions from
different parts of the tree without conflict. That is, if the
dependency tree for a profile looks like the following:
A
|- B --> C@1.0
|
|- D --> C@2.0
Then profile B should see the 1.0 version of C and profile D should
see the 2.0 profile C with respect to the included controls.
To achieve these goals we:
- Ensure that we construct ProfileContext objects with respect to the
correct dependencies in Inspec::DSL.
- Provide a method of accessing all transitively defined rules on a
ProfileContext without pushing all of the rules onto the same global
namespace.
This does not yet handle attributes or libraries.
This extends the dependency feature to include support for url-based
dependencies. It takes some deviations from the current support for
URLs that we'll likely want to make more consistent.
By default, we store downloaded archives in the cache rather than the
unpacked archive. However, to facilitate debugging, we will prefer the
unpacked archive if we find it in the cache.
Signed-off-by: Steven Danna <steve@chef.io>
Instead of just removing all tests because of OS support, supports now acts by adding all tests to the execution context, but doesnt actually execute them. Instead tests are set to skip before they get to the actual execution context
Before introducing InSpec profiles in https://github.com/chef/inspec/pull/252 we had `metadata.rb` keep all information. This included an undisclosed field called `supports`. However, this field was never actually used in practice. So for legacy profiles, this means that `supports` was ignored. In order to keep old profiles running in exactly the way they were before, ignore this field when reading from metadata.rb
For reading the profiles metadata, we're using the train mock backend
through Inspec::Runner. The new `supports` feature never agrees with the
mock backend.
Now, it we figure out if this is a mock class and then just say that it
supports whatever we're asking for.
Tl;dr: there's probably a more beautiful solution to this.
Added a test case, but it fails -- while the command line interface
works fine.
processes('bash').user does not actually make much sense for a resource
that is a list -- different entries can belong to different users.
Analogous for processes('bash').state.
The attributes 'users' and 'states' expose the unique values
corresponding to that property of entries in the process list.
Fixes#295.
before, the resource would throw an exception when include_files
returned nil (i.e., [].flatten!)
added basic unit tests capturing the include_files behaviour