The `toml` gem has a very strict version dependency on an old version
of parslet. This change switches us to use `tomlrb` instead which has
no direct dependencies. This will allow us to bump up to a later version
of parslet that has better error handling and insight into parser errors.
Signed-off-by: Adam Leff <adam@leff.co>
* allow users to configure the profiles namespace
By default it uses the username of the user that is logged into the system. However, the user can now specify the `--user` on the cli to list profiles from a user other than his own domain.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* allow users to provide owner for profile listing and uploading
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* use config only
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* Add non-halting exception support to resources
This adds two `Inspec::Exceptions` that can be used within resources to
either skip or fail a test without halting execution.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
`curl` expects a valid header per RFC 2616 when using the
`-H`/`--header` option. RFC 2616 declares header field/values
should be separated using a colon (`:`):
https://tools.ietf.org/html/rfc2616#section-4.2
Signed-off-by: Seth Chisamore <schisamo@chef.io>
* mount resource: fix for Device-/Sharenames and Mountpoints including whitespaces
Device-/Sharenames and Mountpoints on Linux may include whitespaces (\040), e.g. /etc/fstab entry like:
```//fileserver.corp.internal/Research\040&\040Development /mnt/Research\040&\040Development cifs OTHER_OPTS```
... results in a mount line like:
```//fileserver.corp.internal/Research & Development on /mnt/Research & Development type cifs (OTHER_OPTS)```
The Linux mount command replaces \040 with whitspace automatically, so this should be tributed.
I used a control like this:
```
describe mount('/mnt/Research & Development') do
it { should be_mounted }
its('device') { should eq '//fileserver.corp.internal/Research & Development' }
end
```
Before:
```
× whitespaces-1: Mount with whitespace within sharename and mountpoint. (1 failed)
✔ Mount /mnt/Research & Development should be mounted
× Mount /mnt/Research & Development device should eq "//fileserver.corp.internal/Research & Development"
expected: "//fileserver.corp.internal/Research & Development"
got: "//fileserver.corp.internal/Research"
(compared using ==)
```
After:
```
✔ whitespaces-01: Mount with whitespace within sharename and mountpoint.
✔ Mount /mnt/Research & Development should be mounted
✔ Mount /mnt/Research & Development device should eq "//fileserver.corp.internal/Research & Development"
```
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* mounts_with_whitespaces: make lint happy
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* mount resource: added parentheses as suggested by https://github.com/chef/inspec/pull/2257/files
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* mount resource: fix for Device-/Sharenames and Mountpoints including whitespaces
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
This allows a user to specify an Automate server without prepending
`https://`. Without this, anything using the `url` fetcher will fail
because `open` doesn't interpret the argument as a URL.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Merge `login` and `login_automate` commands
This provides a single interface for logging into either Chef Automate
or Chef Compliance servers. Server type is evaluated at run time via
HTTP responses from designated endpoints.
This also moves the login logic from `Compliance::ComplianceCLI` to a
separate set of modules in `Compliance::API`. This removes logic from
Thor and allows for more in depth Unit testing.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Remove empty line below class definition
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add message to `raise CannotDetermineServerType`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Refactor `token_info` assignment
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Remove unnecessary rubocop disable
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Modify `Login` module namespacing
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Remove mentions of login_automate and --usertoken
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Modify `determine_server_type` to return a symbol
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add support for `login_automate` and `--usertoken`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Fix encoding typo
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Address PR feedback
This does the following:
- Moves `CannotDetermineServerType` error to `.login`
- Changes methods that store configuration to return the configuration
- Moves user output to one location in `.login`
- Makes other small improvements
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Added CRAN resource to check R modules
control 'cran-1' do
impact 1.0
desc '
Ensure R module DBI is installed.
'
describe cpan('DBI') do
it { should be_installed }
its('version') { should cmp >= '3.0' }
end
end
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* cran resource: made lint happy, added negative unit test, removed unused arg perl_lib_path
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* Added CPAN resource to check Perl modules
control 'cpan-1' do
impact 1.0
desc '
Ensure Perl modules DBI and DBD::Pg are installed.
'
describe cpan('DBI') do
it { should be_installed }
end
describe cpan('DBD::Pg') do
it { should be_installed }
its('version') { should cmp >= '3.0' }
end
end
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* cpan resource: fixed unit test for non-installed module
Signed-off-by: Markus Grobelin <grobi@koppzu.de>
* new resource: elasticsearch resource, test cluster/node state
This is a new resource for testing an Elasticsearch cluster. It operates
by fetching the `_nodes` endpoint from a given Elasticsearch node and
collects data about each node in a cluster, even if there's only a
single node.
This work is based on inspiration from an initial PR #1956 submitted by
@rx294.
Signed-off-by: Rony Xavier <rx294@nyu.edu>
Signed-off-by: Aaron Lippold <lippold@gmail.com>
Signed-off-by: Adam Leff <adam@leff.co>
* Reduce mock data on non-default tests
Signed-off-by: Adam Leff <adam@leff.co>
* Adds alias for 'ListDirectory' permission
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Works with Ruby array of permissions as long as possible
Converts to PowerShell array just before use.
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Abstracts user-provided permissions to router method
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds FullControl as a specifiable permission
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds specific permission 'modify'
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Fixes#1743
Limits Windows' broad "read" permission to if it can read all of the
above, instead of just the first:
- File contents
- File attributes
- File extended attributes
- File permissions
This better aligns with how Windows names the permissions.
'read' -> Read instead of 'read' -> ReadData
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* 'Execute' Windows ACL has alias of 'Traverse'
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds 'Delete' permission
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds `should allow('perm').by_user('me')` matcher
Provides hooks for later use with Windows ACL matching
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Adds remaining Windows ACL hooks
Skips ReadAndExecute on intentionally since it just aliases the combo of
2 permissions into one new one.
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* [Rubocop] Reduces ABC / Cyclomatic complexity
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Reduces global scope with `allows()` -> `be_allowed()`
RSpec inferred matchers work nicely here. This changes the `by_user()`
and `by()` chained matchers to just be an options hash on the underlying
`allowed?()` method.
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
* Fixes integration tests with rename `allows()` -> `be_allowed()`
Signed-off-by: David Alexander <opensource@thelonelyghost.com>
Introduces a new `inspec habitat profile setup` command
which will set up an existing profile repository with all
the files necessary to build a Habitat package. This will
prime a repository to be used by the Habitat Builder service.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix `only_if` behavior when used outside controls
This renames `@skip_profile` to `@skip_file` and modifies the scope of
`only_if` (used outside of a control) to only apply to the control file
that contains it instead of the entire profile.
This does this by exposing `@skip_file` from the control context so that
it can be set back to `false` between loading control files in the
profile context.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Modify `get_checks` to accept a rule index
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Modify `only_if` to work regardless of location
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Disable Cyclomatic/Perceived Complexity in Rubocop
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Add comment for `skip_file` in `load_control_file`
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* Remove a broken link.
Signed-off-by: Nathen Harvey <nharvey@chef.io>
* It is now 2017
While the content in this file was actually written in 2015, this
example is meant to be overwritten and is generated by the user in the
current year.
Signed-off-by: Nathen Harvey <nharvey@chef.io>
* Support PAX-formatted tar files, standardize file lists
When a tar file is generated in PAX format, the files have an additional
relative path prefix added to them. For example, instead of:
inspec.yml
... the file is listed as:
./inspec.yml
And the source reader plugin looks only for a "inspec.yml" file to
determine the profile format.
This change addresses this issue by normalizing the file paths in the
TarReader and accounting for the additional "./" prefix that may exist
whenever the tar file is walked looking for a file to read its content.
Signed-off-by: Adam Leff <adam@leff.co>
* Remove pax from unit test, will move to functional
Signed-off-by: Adam Leff <adam@leff.co>
* Add function test for the pax header tar file
Signed-off-by: Adam Leff <adam@leff.co>
* Uses netstat to detect open ports on AIX
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
* Adds unit tests for AIX port resource
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
* Updated so that the credentials file is only interogated if it exists
Fixes#39
Signed-off-by: Russell Seymour <russell.seymour@turtlesystems.co.uk>
* Made change to set credentials to nil as requested
Signed-off-by: Russell Seymour <russell.seymour@turtlesystems.co.uk>
Some object methods have been deprecated in v0.11.0 of the arm sdks.
This commit fixes the get_resources method by using the new resources
object instance method. We are also updating the Gemfile accordingly.
Signed-off-by: sanabriad <sanabria.d@gmail.com>
* Enhance cmp matcher to work with symbols
The `cmp` matcher will now stringify symbol actual values if the
expected value was passed in as a string. This will help with the file
resource `type` method where Train returns the file type as a symbol.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix documentation for file type character_device
Signed-off-by: Adam Leff <adam@leff.co>
* Fix docs for block_device
Signed-off-by: Adam Leff <adam@leff.co>
* Fix file mtime docs
Signed-off-by: Adam Leff <adam@leff.co>
* Move raise condition for host into enabled method
This is related to #1205. This will fix the ssl resource for now until
we redo the exceptions. Still looking around the code and need to build
some unit tests for the ssl resource.
My fix here is to move the raise condition till later in the flow,
specifically the enabled? method. This lets the raise get caught
accordingly without killing the other tests.
Signed-off-by: Jared Quick <jquick@chef.io>
* Remove authors from ssl resource test
Signed-off-by: Jared Quick <jquick@chef.io>
When running `inspec exec` with multiple profiles, such as:
inspec exec profile1 profile2
... profile1 control calls to `inspec.profile.file` will incorrectly
try to pull files from profile2 because the RuntimeProfile object
is stored on the backend object, and we share the backend object.
This change ensures each profile has a unique backend object to ensure
the RuntimeProfile instance is not overwritten.
Signed-off-by: Adam Leff <adam@leff.co>
This change enhances the processes resource to support the busybox
ps command which is common on Alpine, for example. The way we
map ps fields to the structs needed by FilterTable have also been
refactored to be more flexible so we can support multiple formats
in the future.
Also, the processes resource now allows the grep argument to be optional
thus allowing a user to query all resources without passing in a
match-all regex.
Signed-off-by: Adam Leff <adam@leff.co>
As detected in #2036, it is not possible to extract values from
a YAML file if the key is a symbol. This change refactors ObjectTraverser
to support symbol keys before attempting to stringify them.
Signed-off-by: Adam Leff <adam@leff.co>
* Add nil check for sshd config file
This fixes#1778. There was a issue where if the user did not have read
permissions on /etc/ssh/sshd_config it would error out on the empty?
check. The fix here is to also look for nil on the file content. Along
with this I refactored the inspec file empty? check as it does not exist
and was also erroring during my testing.
Signed-off-by: Jared Quick <jquick@chef.io>
* Add emptyfile test object and refactor tests
Signed-off-by: Jared Quick <jquick@chef.io>
Currently, the http resource always executes locally, even when scanning
a remote machine with `--target` which leads to undesireable behavior.
This change adds the ability to remotely execute tests with curl. This
behavior is currently opt-in with the `enable_remote_worker` flag, but
will become the default behavior in InSpec 2.0. Deprecation warnings
are emitted if the user is scanning a remote target but has not opted
in to the new behavior.
Signed-off-by: Adam Leff <adam@leff.co>
* Added output for port/protocol for host resource.
Signed-off-by: Jared Quick <jquick@chef.io>
* refactor with explicit return
This fixes#2085. Port and protocol are now shown in output of the host
resource if defined.
Signed-off-by: Jared Quick <jquick@chef.io>
* refactor with string building return
Signed-off-by: Jared Quick <jquick@chef.io>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resourec - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - firewalld
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource firewalld
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Modifications to new resource - firewalld
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Changing firewalld_command method to prepend the command with 'firewall-cmd' to reduce code reuse.
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Modifications made
* installed? method now tells by checking if firewall-cmd is a command on the system
* The firewalld_command method now strips the stdout of the return
* added another test for testing multiple active zones
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Fixing rake lint issue
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Fixing match and returning boolean for seeing if firewalld is running
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Fixing lint issues
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Empty commit to rerun. Accidentally updated branch.
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Rerunning test, accidentally updated branch. needs sign off commit
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Add hotfix resource for Windows
Signed-off-by: Matt Ray <matthewhray@gmail.com>
* Renamed hotfix to windows_hotfix
Added additional unit test checking for KB that is not present on a box
Signed-off-by: Matt Ray <matthewhray@gmail.com>
* Integration test to spot-check for hotfixes
Queries the Windows operating system via Powershell for a list of all
installed hotfixes and spot-checks every 10th one with the
windows_hotfix resource. Checking hundreds is time-consuming. Also
checks to ensure a non-installed hotfix is not present.
Signed-off-by: Matt Ray <matthewhray@gmail.com>
When using the `query` method in the `postgres_session` resource, if
the query fails, the `query` method attempts to call `skip_resource`
with an error message. Not only does the `skip_resource` not properly
work, but it also returns a `String` object back to the test which is
probably going to try and call the `output` method on it to run the test.
This results in an error like this:
```
Can't read
∅ undefined method `output' for "output":String
```
This change returns the full psql output as a Lines object to the
user, including stderr, so they can at least get the error in their
test output and avoids undefined method errors.
Signed-off-by: Adam Leff <adam@leff.co>
Wildcards are evaluated prior to applying `sudo` permissions. This
means that running `sudo find /some/path/*.conf` will fail if the user
does not have read permissions on `/some/path/` because the wildcard
cannot expand before `sudo` is applied and `*.conf` isn't a file.
The solution for this is to run the command in a subshell that has the
proper permissions (e.g. `sudo sh -c 'find /some/path/*.conf'`).
This modifies `Utils::FindFiles` to use a subshell thus allowing
wildcard support.
This fixes#2157
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
This modifies `Inspec::DirProvider` to allow special characters in the
file glob by escaping those characters via `Shellwords.shellescape`.
This fixes#2111 (`inspec check` on path with special characters)
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* forgiving default attributes
When default attributes arent specified provide one that is much more forgiving.
See this https://github.com/chef/inspec/issues/2176
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
This modifies the enabled check for the `service` resource to use the
service's config file instead of `initctl show-config`.
`initctl show-config` does not accurately show the state of a service if
that service's config file is modified while the service is running.
This fixes#1834.
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
The logic in `Inspec::Attribute` prohibited the use of `false` (FalseClass) as
a valid attribute. If the attribute value supplied was `false`, then it would fall
back to the default value.
This change properly allows the use of `false` as a value, adds the initial tests
for Inspec::Attribute, and also uses better attr_writer semantics for writing/storing
the value.
Signed-off-by: Adam Leff <adam@leff.co>
* Update method in which Pry hooks are removed
Pry 0.11 removed the clear_all method for removing all hooks. This change
updates the way we clear hooks for the events we care about.
Signed-off-by: Adam Leff <adam@leff.co>
Users cannot query for registry keys that have periods in them because of
how rspec-its works. This change enables Array-style syntax for the
registry_key resource so users can use that as a workaround.
Signed-off-by: Adam Leff <adam@leff.co>
The auditd_rules resource has been replaced by the auditd resource.
We are planning on removing the auditd_rules resource in InSpec 2.0.
This change will provide a warning to any user using the old resource.
Signed-off-by: Adam Leff <adam@leff.co>
* Added auditd resource and documentation.
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Added unit tests for auditd resource and updated auditd_rules_test to match new entries in auditctl
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Removed all legacy code for audit < 2.3. Removed parens to create consistency.
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated method names and removed unnecessary content based on review
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Add wildcard/multiple server support to nginx_conf
Signed-off-by: Jerry Aldrich <jerryaldrichiii@gmail.com>
* separate the merge function for maps in nginx_conf
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* Support profile versions for automate profiles storage
Signed-off-by: Alex Pop <apop@chef.io>
* Add unit tests for inspec-compliance bundle
Signed-off-by: Alex Pop <apop@chef.io>
* Refactor target_url method, fix tests, fix rubocop errors
Signed-off-by: Adam Leff <adam@leff.co>
* package resource: assume a default Homebrew path
Homebrew's `brew` script is installed to /usr/local/bin by default which
is usually not in a non-interactive PATH. We will now first check to see
if `brew` is in PATH, and if not, assume a default of `/usr/local/bin/brew`
Signed-off-by: Adam Leff <adam@leff.co>
* Ignore linked container names when parsing docker containers
If a container is linked to another container, the normal `docker ps` output
does not include this information. However, when pulling the `.Names` field
with `docker ps --format`, the linked container is listed in the name. This
is confusing for users trying to use InSpec to audit a container.
This change strips any linked container names from the actual container name.
Signed-off-by: Adam Leff <adam@leff.co>
* Linked container names aren't guaranteed to be last depending on how they were linked
Signed-off-by: Adam Leff <adam@leff.co>
* Adding support for fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* New Resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to new resource - etc_fstab
Signed-off-by: dromazos <dromazmj@dukes.jmu.edu>
* Modifications to docs of new resource etc_fstab
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* Modifications to new resource etc_fstab
Signed-off-by: dromazmj <dromazmj@dukes.jmu.edu>
* wip: extend nginx_conf for http+servers+locations
... well `http` entries really, but we couldnt just call it `https`.
the goal is to `nginx_conf.http` / `nginx_conf.servers` / `nginx_conf.locations` and then also have these calls cascaded down to simplify the access to these fields. the current pattern is rather tedious since we need to check for nil everywhere.
* add test for new nginx accessors
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* add docs for nginx-conf
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* fix all incorrect NGINX spellings in docs
* prevent edge-cases where nginx params are nil
for location, http, and servers
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* more descriptive to_s for nginx servers
as suggested by @adamleff, thank you!
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* add more descriptive to_s for nginx location
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* Modify linux regular expression to handle process names with spaces
Signed-off-by: Chad Scott <cscott@chadikins.com>
* Add mocks, tests, etc.
Signed-off-by: Chad Scott <cscott@chadikins.com>
* Provisioner script to setup resource tests for setgid/setuid/sticky bit tests. This appears to be the correct mechanism per docker_run, but I don't see any other provisioner scripts, so I suspect there is a different Chef-internal mechanism at play here.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* TDD Red for setgid/setuid/sticky File matchers
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add documentation for file resource sgid, sticky, and suid matchers
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add matchers to File for setgid, setuid, and sticky by aliasing existing predicates; TDD green
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Rubocop prefers alias to alias_method.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Lint before pushing, of course
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Correct spelling of setgid and setuid matchers in docs
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add be_setgid, be_setuid, be_sticky matcher integration tests for File.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Revert "Provisioner script to setup resource tests for setgid/setuid/sticky bit tests. This appears to be the correct mechanism per docker_run, but I don't see any other provisioner scripts, so I suspect there is a different Chef-internal mechanism at play here."
This reverts commit 42e672f3b1.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Revert "TDD Red for setgid/setuid/sticky File matchers"
This reverts commit a4f891fc7e.
Signed-off-by: Clinton Wolfe <clintoncwolfe@gmail.com>
* Add support for XML files
Signed-off-by: Morley, Jonathan <jmorley@cvent.com>
* Use REXML instead of nokogiri
Signed-off-by: Morley, Jonathan <jmorley@cvent.com>
* port resource: support ss instead of netstat
`netstat` is officially deprecated and is replaced with `ss`. This PR
changes the port resource to use `ss` if it's available on the target
system.
Signed-off-by: Adam Leff <adam@leff.co>
* Disable Metrics/ClassLength cop on the LinuxPorts class
Signed-off-by: Adam Leff <adam@leff.co>
* Update pip resource for #516 allow user to set path to pip executable
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* support virtualenv path, pip file exec and better logic
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* add tests for the change to the pip path and resource
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* tests are case sensitive, although command line is not
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* use a path verification method instead of a class method
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* use guard clauses instead of conditionals
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* change the control flow to return nil when commands are not available
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* fix the return values when custom pip path is not valid
Signed-off-by: Anthony Shaw <anthonyshaw@apache.org>
* Refactor pip path detection to fix unit tests
Signed-off-by: Adam Leff <adam@leff.co>
* Support mixed-case group entries
The `group` resource downcased the input parameter unless the target
was a Windows node. However, it's completely legitimate for a Unix-y
node to have mixed case group and passwd entries.
This change does have the potential to break people that did not carefully
match their case when searching for a group, but we're currently blocking
people from using the group resource properly if they have mixed-case
entries.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix unit tests
Signed-off-by: Adam Leff <adam@leff.co>
Currently, if you check two properties of a http resource, such as
status and body, two different http requests are made to the server.
However, the response is already stored in an instance variable, so this
change just checks to see if a response is already available and uses it
rather than making another http request.
Signed-off-by: Mark Harrison <mark@mivok.net>
* Added line to fix bug when no key in file rule and updated test to validate bug fix
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated to consider corner case
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Filter check output based on sensitive flag
-Updated check in formatters to filter check output during failures based on
sensitive metadata flag
-Added functional test of output filtering
-Updated documentation with blerb on usage
* Update output format for sensitive resources
Signed-off-by: Kevin Formsma <kevin.formsma@gmail.com>
* Update color output on new test
Update the color output to match the newly-expected non-color format if there are no tests that match.
Signed-off-by: Adam Leff <adam@leff.co>
* Added aide_conf resource and subsequent files
* Updated to match on all selection lines
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Changed to use CommentParser and fixed typo
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Fix typo in test file
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Updated to address PR feedback
Signed-off-by: Jennifer Burns <jburns@mitre.org>
* Refine the profile/test summary output of the CLI formatter
* The "Profile Summary" is misleading as it's not a summary of profile
success/failure but rather the controls within the profile(s). Altered
the output to be clear. I still like calling it the "profile summary"
but wanted to add clarity that the numbers are about the controls.
* Made the colorized output dynamic. The success/failure will only be
green/red if there are controls/tests that fall into that category.
That way we are not printing red failure text when there are no
actual failures. Fixes#1752.
* Cleaned up some grammar issues. ("1 failure" vs "1 failures")
Signed-off-by: Adam Leff <adam@leff.co>
* check the proper field for dpkg installation state fixes#2006
Signed-off-by: Mathieu Sauve-Frankel <msf@kisoku.net>
* Properly handle held packages on dpkg-flavored OS
InSpec was looking at the wrong field in `dpkg -s` output to determine
whether a package was installed or not. An installed, held package was
incorrectly reported as uninstalled.
This adds the proper unit tests and also adds a `be_held` matcher.
Thanks to @kisoku for the initial work in #2007.
Signed-off-by: Adam Leff <adam@leff.co>
With last weeks tag fix, `ourorg/container` ended up having its `repo` reported as `container`.
With this it'll be `ourorg/container` again.
Signed-off-by: Stephan Renatus <srenatus@chef.io>
* New matcher 'be_in'
Fixes#2018
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* small fixes to wording.
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* Added code to use be_in for with the following use case:
describe nginx do
its(module_list) { should be_in AUTHORIZED_MODULE_LIST }
end
Fixes#2018
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* Updates to the matcher
Fixes#2018
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* Added tests for the be_in matcher
Signed-off-by: Rony Xavier <rx294@nyu.edu>
* Requested updates completed
Signed-off-by: Rony Xavier <rx294@nyu.edu>
Add a newline symbol to the end of the parsed input.
Sample hexdump of a file deployed by xinetd cookbook:
$ hexdump -C /var/chef/cache/cookbooks/xinetd/templates/default/xinetd.conf.erb | tail -2
000000b0 72 20 2f 65 74 63 2f 78 69 6e 65 74 64 2e 64 |r /etc/xinetd.d|
000000bf
Signed-off-by: Simonas Kareiva <simonas@5grupe.lt>
* bugfix: empty file strings from archive readers
Empty files in archives are sometimes possible (we just ran into this with TGZ), but is never a valid file to extract. So remove it and discount it altogether. Changed structure to support testing of these global calls.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* lint and rebuild
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
If a profile has a data files directory that looks like this:
```
files/platforms/one/data.json
files/platforms/two/data.json
files/platforms/three/data.json
```
... the source reader will return the directories in the list of files but with
nil contents. This causes an issue when Inspec::Profile tries to create a sha256
checksum of the profile contents only to try to cast nil to a string when
building the null-delimited profile contents string.
Files that are empty will have an empty string as its contents, so it's safe to
assume that file entries with nil contents are actually a directory and have no
affect on the profile's checksum. Therefore, this change will eliminate any file
entries in responses from the source readers where the contents are nil.
Signed-off-by: Adam Leff <adam@leff.co>
* Change host resource to use getent ahosts on Linux
In InSpec 1.31, we changed the `host` resource to use `dig` instead of `getent
hosts` for name resolution because `getent hosts` does not return all entries
(only the first v6 entry if it exists, then the first v4 entry) and we wanted to
keep the Darwin and Linux implementation as close as possible. Unfortunately,
this affected users' ability to do resolution checks for entried stored in their
/etc/hosts file.
This change goes back to using `getent` for Linux and changes to `getent ahosts`
which returns both v4 and v6 records. Additionally, the Darwin provider's dig
implementation was reordered to return v4 addresses before v6 addresses to be
consistent with how `getent ahosts` returns records.
Signed-off-by: Adam Leff <adam@leff.co>
* Update unit tests for resolve_with_getent with proper output
Signed-off-by: Adam Leff <adam@leff.co>
The logic used to determine whether a viable netcat binary exists is wrong and
prevents Linux hosts from doing TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix formatter when two profiles have the same name
In the event that an InSpec runner has two profiles that are named the same
(such as when InSpec generates a profile for the Flat source reader, and Test
Kitchen is running concurrently), InSpec could hand back a profile that does not
contain the example. This leads to nil control data and ugly NilClass errors
when TK runs concurrently.
This change modifies the method that finds the profile by control to not only
match on profile name but also match on example ID.
Signed-off-by: Adam Leff <adam@leff.co>
CoreOS is considered a member of the Linux family, and the `host` resource tries
to use `nc` on Linux hosts to test TCP reachability. Unfortunately, `nc` is not
available on CoreOS, but `ncat` is.
This change attempts to use `nc` first, then `ncat` if it's available.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix host resolution on Darwin, use dig wherever possible
The `host` and `dig` commands do not return non-zero if a query returns NXDOMAIN
or NOERROR, but the DarwinHostProvider was expecting it when deciding whether to
fall back to IPv4 if a IPv6 query failed. Therefore, the `host` resource would
not function properly when resolving hostnames on Darwin. The logic has been
changed to use `dig` short output and query for both v6 and v4 addresses.
Additionally, the LinuxHostProvider has been modified to prefer `dig` if it's
available to keep behavior similar between Darwin and Linux whenever possible.
This has the added benefit of providing v6 and v4 resolution if possible where
`getent hosts` only returns v6 if v6 records exist.
Signed-off-by: Adam Leff <adam@leff.co>
* Fix up methods, add command mock, do string matching in ruby instead of command
Fixes#1643Fixes#1673
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* fixed a small courner case in the error detection - error: vs error
fixed resource to use 'shellwords' module to escape the query
requested chances in method architecture for testing
added unit tests
Fixes: #1814
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* updated resource and tests with requested review changes
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* removed unneeded call to `escaped_query` in the `create_sql_cmd`.
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* removed license info
Signed-off-by: Aaron Lippold <lippold@gmail.com>
* Remove any "All Rights Reserved" references
InSpec is licensed and released under the Apache 2.0 license. This
change removes all reference to legacy code files that still had
any Copyright or License lines referring to "All Rights Reserved".
Signed-off-by: Adam Leff <adam@leff.co>
* fix functional tests
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
The resource itself only offers contents and params right now. It resolved
all include calls it can find and creates the aggregated config object.
This is limited in functionality. One last (set of) PR(s) is needed to
add an interface that makes querying this config file easier. It is due
to the file's inherent complexity that I want to explore which methods
are needed to be effective. In the meantime, this resource offers accessors
to the underlying data that are stable.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* make postgres resource working in mock runner (for inspec check)
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
* keep nil for empty states
Signed-off-by: Christoph Hartmann <chris@lollyrock.com>
For cleanliness and ease of testing, I've moved the logic that
parses the server version from the compliance config to a
separate method.
Signed-off-by: Adam Leff <adam@leff.co>
* showing how to shellout in docs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* adding basic example
Signed-off-by: Richard Shade <rshade@rightscale.com>
* cleanup
Signed-off-by: Richard Shade <rshade@rightscale.com>
* adding in mysql socket, as this doesn't work with non-default installs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* updating per peer review to make socket not a req, and adding port
Signed-off-by: Richard Shade <rshade@rightscale.com>
* updating docs
Signed-off-by: Richard Shade <rshade@rightscale.com>
* Fix to_s on directory resource
The `to_s` method on the `directory` resource is not defined
in the correct class, leading `directory` resources to be printed
as the parent resource (`file`) instead.
Signed-off-by: Adam Leff <adam@leff.co>
* Directory existence should check to see if it's a directory
Signed-off-by: Adam Leff <adam@leff.co>
Net::HTTP does not gracefully handle HTTP options/headers
that have nil values. This updates Fetchers::Url to verify
that all headers we attempt to configure have non-nil,
non-empty values.
This originally surfaced via the audit cookbook with the
chef-automate fetcher in use without the data_collector
token being set.
Signed-off-by: Adam Leff <adam@leff.co>
* Adding toml resource
This adds a `toml` resource that inherits from the json resource and
behaves the same way as the JSON and YAML resources.
Signed-off-by: Nolan Davidson <ndavidson@chef.io>
* s/package/service/ on service unit test descriptions
Signed-off-by: Kristian Vlaardingerbroek <kvlaardingerbroek@schubergphilis.com>
* Add support for CoreOS to the service resource
Signed-off-by: Kristian Vlaardingerbroek <kvlaardingerbroek@schubergphilis.com>
* Remove some apparently unused test setup to remove some warnings.
* Initialize some instance variables before use to silence warnings.
* Remove an unused variable to remove a warning.
* Remove some indirection.
* Silence logger during tests.
* Check if an instance variable was defined before referencing to remove a warning.
* Define duplicated constant once in root rakefile.
* Initialize an instance variable to remove a warning.
* Remove PROJECT_DIR to reduce coupling.
Signed-off-by: Pete Higgins <pete@peterhiggins.org>
The is_automate_server_pre_080? and is_automate_server_080_and_later?
methods needed some fixing. The Compliance configuration could have
a "version" key that was not nil but was an empty hash, indicating
that it came from a pre-0.8.x Automate server. What we really need
to look for is config['version']['version'] being nil?.
Signed-off-by: Adam Leff <adam@leff.co>
Due to limitations in Thor it is not possible to set an argument to be both optional and its value to be mandatory. E.g. the user supplying the --password argument is optional and not always required, but whenever it is used, it requires a value. Handle options that were defined with mandatory values in a way that fails with an `ArgumentError` if the value is missing, i.e.:
```
> inspec exec examples/profile --password
ArgumentError: Please provide a value for --password. For example: --password=hello.
```
It works without `--password` or with `--password=arg`. Also handled for `--sudo-password`.
Fixes: https://github.com/chef/inspec/issues/1901
As suggested: https://github.com/chef/inspec/pull/1904
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
This is currently failing because both `alias` and `alias_method` create method imprints in the FileProvider. This leads to a failure where the TarProvider assumes it doesn't implement `binread`, which in fact it does, since it just calls `read`.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
* Add TCP reachability support on Linux for host resource
This enhances the `host` resource on Linux targets by using netcat
(if installed) to perform TCP reachability checks.
Signed-off-by: Adam Leff <adam@leff.co>
* documentation updates
Signed-off-by: Adam Leff <adam@leff.co>
* Appease rubocop
Signed-off-by: Adam Leff <adam@leff.co>
On Windows, `inspec archive` would sometimes produce incorrect archive files. These would look fine, as tgz files, but would not execute correctly. This would lead to bewildering error messages like this one:
```
Unable to parse inspec.yml: line 1, control characters are not allowed
```
Fix it by treating the files as binary before writing them to get around any encoding issues, since the stream handler is a raw io object anyway.
Closely related to https://github.com/chef/inspec/pull/1906
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
On Windows, we ran into the problem that the execution of inherited profiles would (sometimes) not work. This was due to the use of `File.read` and `File.write` and handling inside the file provider, which works in most cases (especially *nix systems), but does not behave as expected on Windows. A better and more correct way of treating these files is via binary read and write mode, which changes the underlying encoding of both strings that are passed along.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Generated duplicate messages due to the way that examples are aggregated in RSpec. Make sure we never show any duplicate test result messages, as they offer not value to any user.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
The Compliance::API.version method could potentially return
a hash containing no "version" key but would return an empty
hash upon any expected failure. Downstream callers of the
Compliance::API.version method were looking for a "version"
key to always be present when, in some cases, it would not be.
This change ensures that if a version is not available, there
is no "version" key in the hash, and downstream callers of this
method have been changed to check for nil instead of empty.
Signed-off-by: Adam Leff <adam@leff.co>
* add bitbucket repo url handling
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
* backout changes to .gitignore
* adding unit tests for bitbucket url transformers
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
* fixing some indents
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
* fix some indents
Signed-off-by: Mike Stevenson <Mike.Stevenson@us.logicalis.com>
Calling the `digest` library directly unfortunately causes issues in FIPS 140-2 mode:
sha512.c(81): OpenSSL internal error, assertion failed: Low level API call to digest SHA512 forbidden in FIPS mode!
Switching to `OpenSSL` as the caller resolve these issues
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
When running `inspec exec` without the `target` option but against remote endpoints OR when executing it with the `localhost://` target AND having `--sudo` active it would abort the execution. `--target` is a helper to set the Train parameters for `backend`, `host`, `user`, `port`, and potentially `password`. The detection would fail on providing any of these separately without specifying `--target`. The same holds true for the `localhost` train backend or just `localhost://` target.
This type of detection has since moved to Train. The driving reason was to have this very useful check for localhost vs sudo run for any type of inspec (or for that matter: train) execution.
This PR depends on https://github.com/chef/train/pull/179 and the next release of train.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Unsupported operating systems AND the mockloader when using inspec analysis tools may lead to powershell being called with the command being `nil`, because the resource skips during the initialize phase. Instead, propagate an empty string so that `command` has a valid input and then skip the resource.
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Non-url URIs may have lead to broader crashes than initially fixed. Overwrite all URL resolvers in the plugin to work with these non-schema URLs.
Fixes#1473
Signed-off-by: Dominik Richter <dominik.richter@gmail.com>
Due to habitat-sh/habitat#2395, we shouldn't try to log stderr output
to a file for now. While this makes for a less-than-awesome UX, it's
better than a process locking up due to a buffer filling up!
This change redirects stderr from InSpec to stdout and adds some
helpful troubleshooting messages. Should InSpec be able to generate
unique exit codes for when controls fail (vs. a Ruby eval failure)
then we can fix this up some more, too.
Signed-off-by: Adam Leff <adam@leff.co>
The `interface` resource currently refers to methods that don't
yet exist. Fixing the docs for now and will add the features
later.
Signed-off-by: Adam Leff <adam@leff.co>
When attempting to parse the profile out of the target URL, we
were not raising an exception if we failed to do so. Such a situation
could arise if a user's inspec config.json is incorrect either due to
manual editing or failure to re-login after an upgrade past Automate
0.8.0.
This change provides a clear exception if this occurs and also adds
tests for the compliance_profile_name method.
Signed-off-by: Adam Leff <adam@leff.co>
Postgres configuration doesnt always include absolute paths. When using relative paths it will fail!
Also: We treat the include as either a string or an array; when the first condition succeeds and you get a string and the second fails you get a array => ruby tries to add a string with an array and fails. This is now fixed as well.
Fixes: https://github.com/chef/inspec/issues/1780
Fixes: https://github.com/chef/inspec/issues/1738
Signed-off-by: Aaron Lippold <lippold@gmail.com>
The gem resource used to determine if a gem is installed based on the exit
status of the `gem` command, however that command will return zero
if the package was found or not. This patch checks to ensure that the
`gem list` command actually includes the gem name or is empty to
determine if the gem is in fact installed.
If the gem command returns something other than a `0` exit code, then
it'll skip the resource.
Signed-off-by: Keith Walters <keith.walters@cattywamp.us>
